These changes are the raw update to linux-4.4.6-rt14. Kernel sources

[kvmfornfv.git] / kernel / arch / arm / mach-ep93xx / Kconfig

diff --git a/kernel/arch/arm/mach-ep93xx/Kconfig b/kernel/arch/arm/mach-ep93xx/Kconfig
index bec570a..61a75ca 100644 (file)
--- a/kernel/arch/arm/mach-ep93xx/Kconfig
+++ b/kernel/arch/arm/mach-ep93xx/Kconfig
@@ -15,45 +15,8 @@ config CRUNCH
 
 comment "EP93xx Platforms"
 
-choice
-       prompt "EP93xx first SDRAM bank selection"
-       default EP93XX_SDCE3_SYNC_PHYS_OFFSET
-
-config EP93XX_SDCE3_SYNC_PHYS_OFFSET
-       bool "0x00000000 - SDCE3/SyncBoot"
-       help
-         Select this option if you want support for EP93xx boards with the
-         first SDRAM bank at 0x00000000.
-
-config EP93XX_SDCE0_PHYS_OFFSET
-       bool "0xc0000000 - SDCEO"
-       help
-         Select this option if you want support for EP93xx boards with the
-         first SDRAM bank at 0xc0000000.
-
-config EP93XX_SDCE1_PHYS_OFFSET
-       bool "0xd0000000 - SDCE1"
-       help
-         Select this option if you want support for EP93xx boards with the
-         first SDRAM bank at 0xd0000000.
-
-config EP93XX_SDCE2_PHYS_OFFSET
-       bool "0xe0000000 - SDCE2"
-       help
-         Select this option if you want support for EP93xx boards with the
-         first SDRAM bank at 0xe0000000.
-
-config EP93XX_SDCE3_ASYNC_PHYS_OFFSET
-       bool "0xf0000000 - SDCE3/AsyncBoot"
-       help
-         Select this option if you want support for EP93xx boards with the
-         first SDRAM bank at 0xf0000000.
-
-endchoice
-
 config MACH_ADSSPHERE
        bool "Support ADS Sphere"
-       depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
        help
          Say 'Y' here if you want your kernel to support the ADS
          Sphere board.
@@ -63,7 +26,6 @@ config MACH_EDB93XX
 
 config MACH_EDB9301
        bool "Support Cirrus Logic EDB9301"
-       depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
        select MACH_EDB93XX
        help
          Say 'Y' here if you want your kernel to support the Cirrus
@@ -71,7 +33,6 @@ config MACH_EDB9301
 
 config MACH_EDB9302
        bool "Support Cirrus Logic EDB9302"
-       depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
        select MACH_EDB93XX
        help
          Say 'Y' here if you want your kernel to support the Cirrus
@@ -79,7 +40,6 @@ config MACH_EDB9302
 
 config MACH_EDB9302A
        bool "Support Cirrus Logic EDB9302A"
-       depends on EP93XX_SDCE0_PHYS_OFFSET
        select MACH_EDB93XX
        help
          Say 'Y' here if you want your kernel to support the Cirrus
@@ -87,7 +47,6 @@ config MACH_EDB9302A
 
 config MACH_EDB9307
        bool "Support Cirrus Logic EDB9307"
-       depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
        select MACH_EDB93XX
        help
          Say 'Y' here if you want your kernel to support the Cirrus
@@ -95,7 +54,6 @@ config MACH_EDB9307
 
 config MACH_EDB9307A
        bool "Support Cirrus Logic EDB9307A"
-       depends on EP93XX_SDCE0_PHYS_OFFSET
        select MACH_EDB93XX
        help
          Say 'Y' here if you want your kernel to support the Cirrus
@@ -103,7 +61,6 @@ config MACH_EDB9307A
 
 config MACH_EDB9312
        bool "Support Cirrus Logic EDB9312"
-       depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
        select MACH_EDB93XX
        help
          Say 'Y' here if you want your kernel to support the Cirrus
@@ -111,7 +68,6 @@ config MACH_EDB9312
 
 config MACH_EDB9315
        bool "Support Cirrus Logic EDB9315"
-       depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
        select MACH_EDB93XX
        help
          Say 'Y' here if you want your kernel to support the Cirrus
@@ -119,14 +75,12 @@ config MACH_EDB9315
 
 config MACH_EDB9315A
        bool "Support Cirrus Logic EDB9315A"
-       depends on EP93XX_SDCE0_PHYS_OFFSET
        select MACH_EDB93XX
        help
          Say 'Y' here if you want your kernel to support the Cirrus
          Logic EDB9315A Evaluation Board.
 
 config MACH_GESBC9312
-       depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
        bool "Support Glomation GESBC-9312-sx"
        help
          Say 'Y' here if you want your kernel to support the Glomation
@@ -137,7 +91,6 @@ config MACH_MICRO9
 
 config MACH_MICRO9H
        bool "Support Contec Micro9-High"
-       depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
        select MACH_MICRO9
        help
          Say 'Y' here if you want your kernel to support the
@@ -145,7 +98,6 @@ config MACH_MICRO9H
 
 config MACH_MICRO9M
        bool "Support Contec Micro9-Mid"
-       depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
        select MACH_MICRO9
        help
          Say 'Y' here if you want your kernel to support the
@@ -153,7 +105,6 @@ config MACH_MICRO9M
 
 config MACH_MICRO9L
        bool "Support Contec Micro9-Lite"
-       depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
        select MACH_MICRO9
        help
          Say 'Y' here if you want your kernel to support the
@@ -161,7 +112,6 @@ config MACH_MICRO9L
 
 config MACH_MICRO9S
        bool "Support Contec Micro9-Slim"
-       depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
        select MACH_MICRO9
        help
          Say 'Y' here if you want your kernel to support the
@@ -169,28 +119,24 @@ config MACH_MICRO9S
 
 config MACH_SIM_ONE
         bool "Support Simplemachines Sim.One board"
-        depends on EP93XX_SDCE0_PHYS_OFFSET
         help
           Say 'Y' here if you want your kernel to support the
           Simplemachines Sim.One board.
 
 config MACH_SNAPPER_CL15
        bool "Support Bluewater Systems Snapper CL15 Module"
-       depends on EP93XX_SDCE0_PHYS_OFFSET
        help
          Say 'Y' here if you want your kernel to support the Bluewater
          Systems Snapper CL15 Module.
 
 config MACH_TS72XX
        bool "Support Technologic Systems TS-72xx SBC"
-       depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
        help
          Say 'Y' here if you want your kernel to support the
          Technologic Systems TS-72xx board.
 
 config MACH_VISION_EP9307
        bool "Support Vision Engraving Systems EP9307 SoM"
-       depends on EP93XX_SDCE0_PHYS_OFFSET
        help
          Say 'Y' here if you want your kernel to support the
          Vision Engraving Systems EP9307 SoM.