* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
#include "skeleton.dtsi"
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/pinctrl/sun4i-a10.h>
#size-cells = <1>;
ranges;
- framebuffer@0 {
- compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+ simplefb_hdmi: framebuffer@0 {
+ compatible = "allwinner,simple-framebuffer",
+ "simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0-hdmi";
clocks = <&pll6 0>;
status = "disabled";
};
- framebuffer@1 {
+ simplefb_lcd: framebuffer@1 {
compatible = "allwinner,simple-framebuffer",
"simple-framebuffer";
allwinner,pipeline = "de_be0-lcd0";
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
compatible = "arm,cortex-a7";
device_type = "cpu";
reg = <0>;
+ clocks = <&cpu>;
+ clock-latency = <244144>; /* 8 32k periods */
+ operating-points = <
+ /* kHz uV */
+ 1008000 1200000
+ 864000 1200000
+ 720000 1100000
+ 480000 1000000
+ >;
+ #cooling-cells = <2>;
+ cooling-min-level = <0>;
+ cooling-max-level = <3>;
};
cpu@1 {
};
};
+ thermal-zones {
+ cpu_thermal {
+ /* milliseconds */
+ polling-delay-passive = <250>;
+ polling-delay = <1000>;
+ thermal-sensors = <&rtp>;
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+
+ trips {
+ cpu_alert0: cpu_alert0 {
+ /* milliCelsius */
+ temperature = <70000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu_crit {
+ /* milliCelsius */
+ temperature = <100000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
memory {
reg = <0x40000000 0x80000000>;
};
reg = <0x01c20054 0x4>;
clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
clock-output-names = "ahb1";
+
+ /*
+ * Clock AHB1 from PLL6, instead of CPU/AXI which
+ * has rate changes due to cpufreq. Also the DMA
+ * controller requires AHB1 clocked from PLL6.
+ */
+ assigned-clocks = <&ahb1>;
+ assigned-clock-parents = <&pll6 0>;
};
ahb1_gates: clk@01c20060 {
compatible = "allwinner,sun6i-a31-ahb1-gates-clk";
reg = <0x01c20060 0x8>;
clocks = <&ahb1>;
+ clock-indices = <1>, <5>,
+ <6>, <8>, <9>,
+ <10>, <11>, <12>,
+ <13>, <14>,
+ <17>, <18>, <19>,
+ <20>, <21>, <22>,
+ <23>, <24>, <26>,
+ <27>, <29>,
+ <30>, <31>, <32>,
+ <36>, <37>, <40>,
+ <43>, <44>, <45>,
+ <46>, <47>, <50>,
+ <52>, <55>, <56>,
+ <57>, <58>;
clock-output-names = "ahb1_mipidsi", "ahb1_ss",
"ahb1_dma", "ahb1_mmc0", "ahb1_mmc1",
"ahb1_mmc2", "ahb1_mmc3", "ahb1_nand1",
compatible = "allwinner,sun6i-a31-apb1-gates-clk";
reg = <0x01c20068 0x4>;
clocks = <&apb1>;
+ clock-indices = <0>, <4>,
+ <5>, <12>,
+ <13>;
clock-output-names = "apb1_codec", "apb1_digital_mic",
"apb1_pio", "apb1_daudio0",
"apb1_daudio1";
compatible = "allwinner,sun6i-a31-apb2-gates-clk";
reg = <0x01c2006c 0x4>;
clocks = <&apb2>;
+ clock-indices = <0>, <1>,
+ <2>, <3>, <16>,
+ <17>, <18>, <19>,
+ <20>, <21>;
clock-output-names = "apb2_i2c0", "apb2_i2c1",
- "apb2_i2c2", "apb2_i2c3", "apb2_uart0",
- "apb2_uart1", "apb2_uart2", "apb2_uart3",
- "apb2_uart4", "apb2_uart5";
+ "apb2_i2c2", "apb2_i2c3",
+ "apb2_uart0", "apb2_uart1",
+ "apb2_uart2", "apb2_uart3",
+ "apb2_uart4", "apb2_uart5";
};
mmc0_clk: clk@01c20088 {
"mmc3_sample";
};
+ ss_clk: clk@01c2009c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun4i-a10-mod0-clk";
+ reg = <0x01c2009c 0x4>;
+ clocks = <&osc24M>, <&pll6 0>;
+ clock-output-names = "ss";
+ };
+
spi0_clk: clk@01c200a0 {
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
usb_clk: clk@01c200cc {
#clock-cells = <1>;
- #reset-cells = <1>;
+ #reset-cells = <1>;
compatible = "allwinner,sun6i-a31-usb-clk";
reg = <0x01c200cc 0x4>;
clocks = <&osc24M>;
+ clock-indices = <8>, <9>, <10>,
+ <16>, <17>,
+ <18>;
clock-output-names = "usb_phy0", "usb_phy1", "usb_phy2",
"usb_ohci0", "usb_ohci1",
"usb_ohci2";
};
/*
- * The following two are dummy clocks, placeholders used in the gmac_tx
- * clock. The gmac driver will choose one parent depending on the PHY
- * interface mode, using clk_set_rate auto-reparenting.
- * The actual TX clock rate is not controlled by the gmac_tx clock.
+ * The following two are dummy clocks, placeholders
+ * used in the gmac_tx clock. The gmac driver will
+ * choose one parent depending on the PHY interface
+ * mode, using clk_set_rate auto-reparenting.
+ *
+ * The actual TX clock rate is not controlled by the
+ * gmac_tx clock.
*/
mii_phy_tx_clk: clk@1 {
#clock-cells = <0>;
clocks = <&ahb1_gates 6>;
resets = <&ahb1_rst 6>;
#dma-cells = <1>;
-
- /* DMA controller requires AHB1 clocked from PLL6 */
- assigned-clocks = <&ahb1>;
- assigned-clock-parents = <&pll6 0>;
};
mmc0: mmc@01c0f000 {
reset-names = "ahb";
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc1: mmc@01c10000 {
reset-names = "ahb";
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc2: mmc@01c11000 {
reset-names = "ahb";
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
mmc3: mmc@01c12000 {
reset-names = "ahb";
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ usb_otg: usb@01c19000 {
+ compatible = "allwinner,sun6i-a31-musb";
+ reg = <0x01c19000 0x0400>;
+ clocks = <&ahb1_gates 24>;
+ resets = <&ahb1_rst 24>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "mc";
+ phys = <&usbphy 0>;
+ phy-names = "usb";
+ extcon = <&usbphy 0>;
+ status = "disabled";
};
usbphy: phy@01c19400 {
clocks = <&apb1_gates 5>;
gpio-controller;
interrupt-controller;
- #interrupt-cells = <2>;
- #size-cells = <0>;
+ #interrupt-cells = <3>;
#gpio-cells = <3>;
uart0_pins_a: uart0@0 {
};
mmc0_pins_a: mmc0@0 {
- allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+ allwinner,pins = "PF0", "PF1", "PF2",
+ "PF3", "PF4", "PF5";
allwinner,function = "mmc0";
allwinner,drive = <SUN4I_PINCTRL_30_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+ mmc1_pins_a: mmc1@0 {
+ allwinner,pins = "PG0", "PG1", "PG2", "PG3",
+ "PG4", "PG5";
+ allwinner,function = "mmc1";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ mmc2_pins_a: mmc2@0 {
+ allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+ "PC10", "PC11";
+ allwinner,function = "mmc2";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ mmc2_8bit_emmc_pins: mmc2@1 {
+ allwinner,pins = "PC6", "PC7", "PC8", "PC9",
+ "PC10", "PC11", "PC12",
+ "PC13", "PC14", "PC15",
+ "PC24";
+ allwinner,function = "mmc2";
+ allwinner,drive = <SUN4I_PINCTRL_30_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
gmac_pins_mii_a: gmac_mii@0 {
allwinner,pins = "PA0", "PA1", "PA2", "PA3",
"PA8", "PA9", "PA11",
reg = <0x01c20ca0 0x20>;
};
+ lradc: lradc@01c22800 {
+ compatible = "allwinner,sun4i-a10-lradc-keys";
+ reg = <0x01c22800 0x100>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
rtp: rtp@01c25000 {
compatible = "allwinner,sun6i-a31-ts";
reg = <0x01c25000 0x100>;
#size-cells = <0>;
};
+ crypto: crypto-engine@01c15000 {
+ compatible = "allwinner,sun4i-a10-crypto";
+ reg = <0x01c15000 0x1000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ahb1_gates 5>, <&ss_clk>;
+ clock-names = "ahb", "mod";
+ resets = <&ahb1_rst 5>;
+ reset-names = "ahb";
+ };
+
timer@01c60000 {
- compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer";
+ compatible = "allwinner,sun6i-a31-hstimer",
+ "allwinner,sun7i-a20-hstimer";
reg = <0x01c60000 0x1000>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
ar100: ar100_clk {
compatible = "allwinner,sun6i-a31-ar100-clk";
#clock-cells = <0>;
- clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
+ clocks = <&osc32k>, <&osc24M>, <&pll6 0>,
+ <&pll6 0>;
clock-output-names = "ar100";
};
resets = <&apb0_rst 0>;
gpio-controller;
interrupt-controller;
- #interrupt-cells = <2>;
+ #interrupt-cells = <3>;
#size-cells = <0>;
#gpio-cells = <3>;
allwinner,drive = <SUN4I_PINCTRL_10_MA>;
allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+
+ p2wi_pins: p2wi {
+ allwinner,pins = "PL0", "PL1";
+ allwinner,function = "s_p2wi";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+ };
+
+ p2wi: i2c@01f03400 {
+ compatible = "allwinner,sun6i-a31-p2wi";
+ reg = <0x01f03400 0x400>;
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&apb0_gates 3>;
+ clock-frequency = <100000>;
+ resets = <&apb0_rst 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&p2wi_pins>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
};
};
};
Code Review / kvmfornfv.git / blobdiff