These changes are the raw update to linux-4.4.6-rt14. Kernel sources

[kvmfornfv.git] / kernel / arch / arm / boot / dts / sun6i-a31-m9.dts

diff --git a/kernel/arch/arm/boot/dts/sun6i-a31-m9.dts b/kernel/arch/arm/boot/dts/sun6i-a31-m9.dts
index 139a21e..6e0e568 100644 (file)
--- a/kernel/arch/arm/boot/dts/sun6i-a31-m9.dts
+++ b/kernel/arch/arm/boot/dts/sun6i-a31-m9.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -53,100 +48,102 @@
 #include <dt-bindings/pinctrl/sun4i-a10.h>
 
 / {
-       model = "Mele M9 / A1000G Quad top set box";
+       model = "Mele M9 top set box";
        compatible = "mele,m9", "allwinner,sun6i-a31";
 
+       aliases {
+               serial0 = &uart0;
+       };
+
        chosen {
-               bootargs = "earlyprintk console=ttyS0,115200";
+               stdout-path = "serial0:115200n8";
        };
 
-       soc@01c00000 {
-               mmc0: mmc@01c0f000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
-                       vmmc-supply = <&reg_vcc3v3>;
-                       bus-width = <4>;
-                       cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
-                       cd-inverted;
-                       status = "okay";
-               };
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&led_pins_m9>;
 
-               usbphy: phy@01c19400 {
-                       usb1_vbus-supply = <&reg_usb1_vbus>;
-                       status = "okay";
+               blue {
+                       label = "m9:blue:usr";
+                       gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
                };
+       };
+};
 
-               ehci0: usb@01c1a000 {
-                       status = "okay";
-               };
+&ehci0 {
+       status = "okay";
+};
 
-               ehci1: usb@01c1b000 {
-                       status = "okay";
-               };
+&ehci1 {
+       status = "okay";
+};
 
-               pio: pinctrl@01c20800 {
-                       led_pins_m9: led_pins@0 {
-                               allwinner,pins = "PH13";
-                               allwinner,function = "gpio_out";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-
-                       mmc0_cd_pin_m9: mmc0_cd_pin@0 {
-                               allwinner,pins = "PH22";
-                               allwinner,function = "gpio_in";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-                       };
-
-                       usb1_vbus_pin_m9: usb1_vbus_pin@0 {
-                               allwinner,pins = "PC27";
-                               allwinner,function = "gpio_out";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-               };
+&gmac {
+       pinctrl-names = "default";
+       pinctrl-0 = <&gmac_pins_mii_a>;
+       phy = <&phy1>;
+       phy-mode = "mii";
+       status = "okay";
 
-               uart0: serial@01c28000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&uart0_pins_a>;
-                       status = "okay";
-               };
+       phy1: ethernet-phy@1 {
+               reg = <1>;
+       };
+};
 
-               gmac: ethernet@01c30000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&gmac_pins_mii_a>;
-                       phy = <&phy1>;
-                       phy-mode = "mii";
-                       status = "okay";
+&ir {
+       pinctrl-names = "default";
+       pinctrl-0 = <&ir_pins_a>;
+       status = "okay";
+};
 
-                       phy1: ethernet-phy@1 {
-                               reg = <1>;
-                       };
-               };
+&mmc0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>;
+       vmmc-supply = <&reg_vcc3v3>;
+       bus-width = <4>;
+       cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */
+       cd-inverted;
+       status = "okay";
+};
 
-               ir@01f02000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&ir_pins_a>;
-                       status = "okay";
-               };
+&pio {
+       led_pins_m9: led_pins@0 {
+               allwinner,pins = "PH13";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
        };
 
-       leds {
-               compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_m9>;
-
-               blue {
-                       label = "m9:blue:usr";
-                       gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>;
-               };
+       mmc0_cd_pin_m9: mmc0_cd_pin@0 {
+               allwinner,pins = "PH22";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
        };
 
-       reg_usb1_vbus: usb1-vbus {
-               pinctrl-names = "default";
-               pinctrl-0 = <&usb1_vbus_pin_m9>;
-               gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
-               status = "okay";
+       usb1_vbus_pin_m9: usb1_vbus_pin@0 {
+               allwinner,pins = "PC27";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
        };
 };
+
+&reg_usb1_vbus {
+       pinctrl-names = "default";
+       pinctrl-0 = <&usb1_vbus_pin_m9>;
+       gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>;
+       status = "okay";
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins_a>;
+       status = "okay";
+};
+
+&usbphy {
+       usb1_vbus-supply = <&reg_usb1_vbus>;
+       status = "okay";
+};