These changes are the raw update to linux-4.4.6-rt14. Kernel sources

[kvmfornfv.git] / kernel / arch / arm / boot / dts / sun5i-a10s-r7-tv-dongle.dts

diff --git a/kernel/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/kernel/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
index 7deddfc..3b05798 100644 (file)
--- a/kernel/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
+++ b/kernel/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -56,67 +51,12 @@
        model = "R7 A10s hdmi tv-stick";
        compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s";
 
-       soc@01c00000 {
-               mmc0: mmc@01c0f000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
-                       vmmc-supply = <&reg_vcc3v3>;
-                       bus-width = <4>;
-                       cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
-                       cd-inverted;
-                       status = "okay";
-               };
-
-               mmc1: mmc@01c10000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&mmc1_pins_a>;
-                       vmmc-supply = <&reg_vcc3v3>;
-                       bus-width = <4>;
-                       non-removable;
-                       status = "okay";
-               };
-
-               usbphy: phy@01c13400 {
-                       usb1_vbus-supply = <&reg_usb1_vbus>;
-                       status = "okay";
-               };
-
-               ehci0: usb@01c14000 {
-                       status = "okay";
-               };
-
-               ohci0: usb@01c14400 {
-                       status = "okay";
-               };
-
-               pinctrl@01c20800 {
-                       mmc0_cd_pin_r7: mmc0_cd_pin@0 {
-                               allwinner,pins = "PG1";
-                               allwinner,function = "gpio_in";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-                       };
-
-                       led_pins_r7: led_pins@0 {
-                               allwinner,pins = "PB2";
-                               allwinner,function = "gpio_out";
-                               allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-
-                       usb1_vbus_pin_r7: usb1_vbus_pin@0 {
-                               allwinner,pins = "PG13";
-                               allwinner,function = "gpio_out";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-               };
+       aliases {
+               serial0 = &uart0;
+       };
 
-               uart0: serial@01c28000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&uart0_pins_a>;
-                       status = "okay";
-               };
+       chosen {
+               stdout-path = "serial0:115200n8";
        };
 
        leds {
@@ -130,10 +70,71 @@
                        default-state = "on";
                };
        };
+};
+
+&ehci0 {
+       status = "okay";
+};
 
-       reg_usb1_vbus: usb1-vbus {
-               pinctrl-0 = <&usb1_vbus_pin_r7>;
-               gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
-               status = "okay";
+&mmc0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
+       vmmc-supply = <&reg_vcc3v3>;
+       bus-width = <4>;
+       cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+       cd-inverted;
+       status = "okay";
+};
+
+&mmc1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc1_pins_a>;
+       vmmc-supply = <&reg_vcc3v3>;
+       bus-width = <4>;
+       non-removable;
+       status = "okay";
+};
+
+&ohci0 {
+       status = "okay";
+};
+
+&pio {
+       mmc0_cd_pin_r7: mmc0_cd_pin@0 {
+               allwinner,pins = "PG1";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+       };
+
+       led_pins_r7: led_pins@0 {
+               allwinner,pins = "PB2";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
        };
+
+       usb1_vbus_pin_r7: usb1_vbus_pin@0 {
+               allwinner,pins = "PG13";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+       };
+};
+
+&reg_usb1_vbus {
+       pinctrl-0 = <&usb1_vbus_pin_r7>;
+       gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
+       status = "okay";
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins_a>;
+       status = "okay";
+};
+
+&usbphy {
+       usb1_vbus-supply = <&reg_usb1_vbus>;
+       status = "okay";
 };