* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public
- * License along with this file; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
serial2 = &uart3;
};
- soc@01c00000 {
- emac: ethernet@01c0b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
- phy = <&phy1>;
- status = "okay";
- };
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
- mdio@01c0b080 {
- status = "okay";
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_olinuxino>;
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
+ green {
+ label = "a10s-olinuxino-micro:green:usr";
+ gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
};
+ };
+};
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
- cd-inverted;
- status = "okay";
- };
+&ehci0 {
+ status = "okay";
+};
- mmc1: mmc@01c10000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
- vmmc-supply = <®_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
- cd-inverted;
- status = "okay";
- };
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+ phy = <&phy1>;
+ status = "okay";
+};
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <®_usb1_vbus>;
- status = "okay";
- };
+&emac_sram {
+ status = "okay";
+};
- ehci0: usb@01c14000 {
- status = "okay";
- };
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
- ohci0: usb@01c14400 {
- status = "okay";
- };
+ axp152: pmic@30 {
+ reg = <0x30>;
+ interrupts = <0>;
+ };
+};
- pinctrl@01c20800 {
- mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
- allwinner,pins = "PG1";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-
- mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
- allwinner,pins = "PG13";
- allwinner,function = "gpio_in";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
- };
-
- led_pins_olinuxino: led_pins@0 {
- allwinner,pins = "PE3";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
- allwinner,pins = "PB10";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
+#include "axp152.dtsi"
- lradc: lradc@01c22800 {
- vref-supply = <®_vcc3v0>;
- status = "okay";
-
- button@191 {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- channel = <0>;
- voltage = <191274>;
- };
-
- button@392 {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- channel = <0>;
- voltage = <392644>;
- };
-
- button@601 {
- label = "Menu";
- linux,code = <KEY_MENU>;
- channel = <0>;
- voltage = <601151>;
- };
-
- button@795 {
- label = "Enter";
- linux,code = <KEY_ENTER>;
- channel = <0>;
- voltage = <795090>;
- };
-
- button@987 {
- label = "Home";
- linux,code = <KEY_HOMEPAGE>;
- channel = <0>;
- voltage = <987387>;
- };
- };
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
+ at24@50 {
+ compatible = "atmel,24c16";
+ pagesize = <16>;
+ reg = <0x50>;
+ read-only;
+ };
+};
- uart2: serial@01c28800 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins_a>;
- status = "okay";
- };
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+};
- uart3: serial@01c28c00 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_pins_a>;
- status = "okay";
- };
+&lradc {
+ vref-supply = <®_vcc3v0>;
+ status = "okay";
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
- };
+ button@191 {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ channel = <0>;
+ voltage = <191274>;
+ };
- i2c1: i2c@01c2b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_pins_a>;
- status = "okay";
-
- at24@50 {
- compatible = "at,24c16";
- pagesize = <16>;
- reg = <0x50>;
- read-only;
- };
- };
+ button@392 {
+ label = "Volume Down";
+ linux,code = <KEY_VOLUMEDOWN>;
+ channel = <0>;
+ voltage = <392644>;
+ };
- i2c2: i2c@01c2b400 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins_a>;
- status = "okay";
- };
+ button@601 {
+ label = "Menu";
+ linux,code = <KEY_MENU>;
+ channel = <0>;
+ voltage = <601151>;
};
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_olinuxino>;
+ button@795 {
+ label = "Enter";
+ linux,code = <KEY_ENTER>;
+ channel = <0>;
+ voltage = <795090>;
+ };
- green {
- label = "a10s-olinuxino-micro:green:usr";
- gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
+ button@987 {
+ label = "Home";
+ linux,code = <KEY_HOMEPAGE>;
+ channel = <0>;
+ voltage = <987387>;
+ };
+};
+
+&mdio {
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+ cd-inverted;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
+ cd-inverted;
+ status = "okay";
+};
+
+&ohci0 {
+ status = "okay";
+};
+
+&otg_sram {
+ status = "okay";
+};
+
+&pio {
+ mmc0_cd_pin_olinuxino_micro: mmc0_cd_pin@0 {
+ allwinner,pins = "PG1";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+
+ mmc1_cd_pin_olinuxino_micro: mmc1_cd_pin@0 {
+ allwinner,pins = "PG13";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
};
- reg_usb1_vbus: usb1-vbus {
- pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
- gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
- status = "okay";
+ led_pins_olinuxino: led_pins@0 {
+ allwinner,pins = "PE3";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+
+ usb1_vbus_pin_olinuxino_m: usb1_vbus_pin@0 {
+ allwinner,pins = "PB10";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
+
+ usb0_id_detect_pin: usb0_id_detect_pin@0 {
+ allwinner,pins = "PG12";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+ };
+};
+
+®_usb0_vbus {
+ gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
+ status = "okay";
+};
+
+®_usb1_vbus {
+ pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>;
+ gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins_a>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins_a>;
+ status = "okay";
+};
+
+&usb_otg {
+ dr_mode = "otg";
+ status = "okay";
+};
+
+&usb0_vbus_pin_a {
+ allwinner,pins = "PG11";
+};
+
+&usbphy {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_id_detect_pin>;
+ usb0_id_det-gpio = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ usb0_vbus-supply = <®_usb0_vbus>;
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
};
Code Review / kvmfornfv.git / blobdiff