These changes are the raw update to linux-4.4.6-rt14. Kernel sources

[kvmfornfv.git] / kernel / arch / arm / boot / dts / sun4i-a10-pcduino.dts

diff --git a/kernel/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/kernel/arch/arm/boot/dts/sun4i-a10-pcduino.dts
index 9d1e548..39034aa 100644 (file)
--- a/kernel/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/kernel/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -17,11 +17,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -58,90 +53,12 @@
        model = "LinkSprite pcDuino";
        compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10";
 
-       soc@01c00000 {
-               emac: ethernet@01c0b000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&emac_pins_a>;
-                       phy = <&phy1>;
-                       status = "okay";
-               };
-
-               pinctrl@01c20800 {
-                       led_pins_pcduino: led_pins@0 {
-                               allwinner,pins = "PH15", "PH16";
-                               allwinner,function = "gpio_out";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-
-                       key_pins_pcduino: key_pins@0 {
-                               allwinner,pins = "PH17", "PH18", "PH19";
-                               allwinner,function = "gpio_in";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-               };
-
-               mdio@01c0b080 {
-                       status = "okay";
-
-                       phy1: ethernet-phy@1 {
-                               reg = <1>;
-                       };
-               };
-
-               mmc0: mmc@01c0f000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-                       vmmc-supply = <&reg_vcc3v3>;
-                       bus-width = <4>;
-                       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-                       cd-inverted;
-                       status = "okay";
-               };
-
-               usbphy: phy@01c13400 {
-                       usb1_vbus-supply = <&reg_usb1_vbus>;
-                       usb2_vbus-supply = <&reg_usb2_vbus>;
-                       status = "okay";
-               };
-
-               ehci0: usb@01c14000 {
-                       status = "okay";
-               };
-
-               ohci0: usb@01c14400 {
-                       status = "okay";
-               };
-
-               ehci1: usb@01c1c000 {
-                       status = "okay";
-               };
-
-               ohci1: usb@01c1c400 {
-                       status = "okay";
-               };
-
-               uart0: serial@01c28000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&uart0_pins_a>;
-                       status = "okay";
-               };
-
-               i2c0: i2c@01c2ac00 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&i2c0_pins_a>;
-                       status = "okay";
-
-                       axp209: pmic@34 {
-                               compatible = "x-powers,axp209";
-                               reg = <0x34>;
-                               interrupts = <0>;
+       aliases {
+               serial0 = &uart0;
+       };
 
-                               interrupt-controller;
-                               #interrupt-cells = <1>;
-                       };
-               };
+       chosen {
+               stdout-path = "serial0:115200n8";
        };
 
        leds {
@@ -185,12 +102,138 @@
                        gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
                };
        };
+};
 
-       reg_usb1_vbus: usb1-vbus {
-               status = "okay";
+&cpu0 {
+       cpu-supply = <&reg_dcdc2>;
+};
+
+&ehci0 {
+       status = "okay";
+};
+
+&ehci1 {
+       status = "okay";
+};
+
+&emac {
+       pinctrl-names = "default";
+       pinctrl-0 = <&emac_pins_a>;
+       phy = <&phy1>;
+       status = "okay";
+};
+
+&emac_sram {
+       status = "okay";
+};
+
+&i2c0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c0_pins_a>;
+       status = "okay";
+
+       axp209: pmic@34 {
+               reg = <0x34>;
+               interrupts = <0>;
+       };
+};
+
+&mdio {
+       status = "okay";
+
+       phy1: ethernet-phy@1 {
+               reg = <1>;
+       };
+};
+
+&mmc0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+       vmmc-supply = <&reg_vcc3v3>;
+       bus-width = <4>;
+       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+       cd-inverted;
+       status = "okay";
+};
+
+&ohci0 {
+       status = "okay";
+};
+
+&ohci1 {
+       status = "okay";
+};
+
+&otg_sram {
+       status = "okay";
+};
+
+&pio {
+       led_pins_pcduino: led_pins@0 {
+               allwinner,pins = "PH15", "PH16";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
        };
 
-       reg_usb2_vbus: usb2-vbus {
-               status = "okay";
+       key_pins_pcduino: key_pins@0 {
+               allwinner,pins = "PH17", "PH18", "PH19";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
        };
+
+       usb0_id_detect_pin: usb0_id_detect_pin@0 {
+               allwinner,pins = "PH4";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+       };
+};
+
+#include "axp209.dtsi"
+
+&reg_dcdc2 {
+       regulator-always-on;
+       regulator-min-microvolt = <1000000>;
+       regulator-max-microvolt = <1400000>;
+       regulator-name = "vdd-cpu";
+};
+
+&reg_dcdc3 {
+       regulator-always-on;
+       regulator-min-microvolt = <1000000>;
+       regulator-max-microvolt = <1400000>;
+       regulator-name = "vdd-int-dll";
+};
+
+&reg_ldo1 {
+       regulator-name = "vdd-rtc";
+};
+
+&reg_ldo2 {
+       regulator-always-on;
+       regulator-min-microvolt = <3000000>;
+       regulator-max-microvolt = <3000000>;
+       regulator-name = "avcc";
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins_a>;
+       status = "okay";
+};
+
+&usb_otg {
+       dr_mode = "otg";
+       status = "okay";
+};
+
+&usbphy {
+       pinctrl-names = "default";
+       pinctrl-0 = <&usb0_id_detect_pin>;
+       usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+       usb1_vbus-supply = <&reg_vcc5v0>; /* USB1 VBUS is always on */
+       usb2_vbus-supply = <&reg_vcc5v0>; /* USB2 VBUS is always on */
+       status = "okay";
 };