Code Review / kvmfornfv.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | review | tree
raw | inline | side by side
These changes are the raw update to linux-4.4.6-rt14. Kernel sources
[kvmfornfv.git] / kernel / arch / arm / boot / dts / sun4i-a10-olinuxino-lime.dts
diff --git a/kernel/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/kernel/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index 75742f8..b350448 100644 (file)
--- a/kernel/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/kernel/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -16,11 +16,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -56,136 +51,187 @@
        model = "Olimex A10-OLinuXino-LIME";
        compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
 
-       cpus {
-               cpu0: cpu@0 {
-                       /*
-                        * The A10-Lime is known to be unstable
-                        * when running at 1008 MHz
-                        */
-                       operating-points = <
-                               /* kHz    uV */
-                               912000  1350000
-                               864000  1300000
-                               624000  1250000
-                               >;
-                       cooling-max-level = <2>;
-               };
+       aliases {
+               serial0 = &uart0;
        };
 
-       soc@01c00000 {
-               emac: ethernet@01c0b000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&emac_pins_a>;
-                       phy = <&phy1>;
-                       status = "okay";
-               };
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
 
-               mdio@01c0b080 {
-                       status = "okay";
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&led_pins_olinuxinolime>;
 
-                       phy1: ethernet-phy@1 {
-                               reg = <1>;
-                       };
+               green {
+                       label = "a10-olinuxino-lime:green:usr";
+                       gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+                       default-state = "on";
                };
+       };
+};
 
-               mmc0: mmc@01c0f000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
-                       vmmc-supply = <&reg_vcc3v3>;
-                       bus-width = <4>;
-                       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
-                       cd-inverted;
-                       status = "okay";
-               };
+&ahci {
+       target-supply = <&reg_ahci_5v>;
+       status = "okay";
+};
 
-               usbphy: phy@01c13400 {
-                       usb1_vbus-supply = <&reg_usb1_vbus>;
-                       usb2_vbus-supply = <&reg_usb2_vbus>;
-                       status = "okay";
-               };
+&cpu0 {
+       /*
+        * The A10-Lime is known to be unstable when running at 1008 MHz
+        */
+       operating-points = <
+               /* kHz    uV */
+               912000  1350000
+               864000  1300000
+               624000  1250000
+               >;
+       cooling-max-level = <2>;
+};
 
-               ehci0: usb@01c14000 {
-                       status = "okay";
-               };
+&ehci0 {
+       status = "okay";
+};
 
-               ohci0: usb@01c14400 {
-                       status = "okay";
-               };
+&ehci1 {
+       status = "okay";
+};
 
-               ahci: sata@01c18000 {
-                       target-supply = <&reg_ahci_5v>;
-                       status = "okay";
-               };
+&emac {
+       pinctrl-names = "default";
+       pinctrl-0 = <&emac_pins_a>;
+       phy = <&phy1>;
+       status = "okay";
+};
 
-               ehci1: usb@01c1c000 {
-                       status = "okay";
-               };
+&emac_sram {
+       status = "okay";
+};
 
-               ohci1: usb@01c1c400 {
-                       status = "okay";
-               };
+&i2c0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c0_pins_a>;
+       status = "okay";
 
-               pinctrl@01c20800 {
-                       ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
-                               allwinner,pins = "PC3";
-                               allwinner,function = "gpio_out";
-                               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-
-                       led_pins_olinuxinolime: led_pins@0 {
-                               allwinner,pins = "PH2";
-                               allwinner,function = "gpio_out";
-                               allwinner,drive = <SUN4I_PINCTRL_20_MA>;
-                               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-                       };
-               };
+       axp209: pmic@34 {
+               compatible = "x-powers,axp209";
+               reg = <0x34>;
+               interrupts = <0>;
 
-               uart0: serial@01c28000 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&uart0_pins_a>;
-                       status = "okay";
-               };
+               interrupt-controller;
+               #interrupt-cells = <1>;
+       };
+};
 
-               i2c0: i2c@01c2ac00 {
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&i2c0_pins_a>;
-                       status = "okay";
+&i2c1 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&i2c1_pins_a>;
+       status = "okay";
+
+       eeprom: eeprom@50 {
+               compatible = "atmel,24c16";
+               reg = <0x50>;
+               pagesize = <16>;
+       };
+};
 
-                       axp209: pmic@34 {
-                               compatible = "x-powers,axp209";
-                               reg = <0x34>;
-                               interrupts = <0>;
+&mdio {
+       status = "okay";
 
-                               interrupt-controller;
-                               #interrupt-cells = <1>;
-                       };
-               };
+       phy1: ethernet-phy@1 {
+               reg = <1>;
        };
+};
 
-       leds {
-               compatible = "gpio-leds";
-               pinctrl-names = "default";
-               pinctrl-0 = <&led_pins_olinuxinolime>;
+&mmc0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+       vmmc-supply = <&reg_vcc3v3>;
+       bus-width = <4>;
+       cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+       cd-inverted;
+       status = "okay";
+};
 
-               green {
-                       label = "a10-olinuxino-lime:green:usr";
-                       gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
-                       default-state = "on";
-               };
+&ohci0 {
+       status = "okay";
+};
+
+&ohci1 {
+       status = "okay";
+};
+
+&otg_sram {
+       status = "okay";
+};
+
+&pio {
+       ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+               allwinner,pins = "PC3";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
        };
 
-       reg_ahci_5v: ahci-5v {
-               pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
-               gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
-               status = "okay";
+       led_pins_olinuxinolime: led_pins@0 {
+               allwinner,pins = "PH2";
+               allwinner,function = "gpio_out";
+               allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
        };
 
-       reg_usb1_vbus: usb1-vbus {
-               status = "okay";
+       usb0_id_detect_pin: usb0_id_detect_pin@0 {
+               allwinner,pins = "PH4";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
        };
 
-       reg_usb2_vbus: usb2-vbus {
-               status = "okay";
+       usb0_vbus_detect_pin: usb0_vbus_detect_pin@0 {
+               allwinner,pins = "PH5";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_PULL_DOWN>;
        };
 };
+
+&reg_ahci_5v {
+       pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
+       gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+       status = "okay";
+};
+
+&reg_usb0_vbus {
+       status = "okay";
+};
+
+&reg_usb1_vbus {
+       status = "okay";
+};
+
+&reg_usb2_vbus {
+       status = "okay";
+};
+
+&uart0 {
+       pinctrl-names = "default";
+       pinctrl-0 = <&uart0_pins_a>;
+       status = "okay";
+};
+
+&usb_otg {
+       dr_mode = "otg";
+       status = "okay";
+};
+
+&usbphy {
+       pinctrl-names = "default";
+       pinctrl-0 = <&usb0_id_detect_pin>, <&usb0_vbus_detect_pin>;
+       usb0_id_det-gpio   = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
+       usb0_vbus_det-gpio = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
+       usb0_vbus-supply   = <&reg_usb0_vbus>;
+       usb1_vbus-supply = <&reg_usb1_vbus>;
+       usb2_vbus-supply = <&reg_usb2_vbus>;
+       status = "okay";
+};