These changes are the raw update to linux-4.4.6-rt14. Kernel sources

[kvmfornfv.git] / kernel / arch / arm / boot / dts / sun4i-a10-marsboard.dts

diff --git a/kernel/arch/arm/boot/dts/sun4i-a10-marsboard.dts b/kernel/arch/arm/boot/dts/sun4i-a10-marsboard.dts
index 9ee86a7..8e50723 100644 (file)
--- a/kernel/arch/arm/boot/dts/sun4i-a10-marsboard.dts
+++ b/kernel/arch/arm/boot/dts/sun4i-a10-marsboard.dts
@@ -17,11 +17,6 @@
  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  *     GNU General Public License for more details.
  *
- *     You should have received a copy of the GNU General Public
- *     License along with this file; if not, write to the Free
- *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- *     MA 02110-1301 USA
- *
  * Or, alternatively,
  *
  *  b) Permission is hereby granted, free of charge, to any person
@@ -57,6 +52,14 @@
        model = "HAOYU Electronics Marsboard A10";
        compatible = "haoyu,a10-marsboard", "allwinner,sun4i-a10";
 
+       aliases {
+               serial0 = &uart0;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
        leds {
                compatible = "gpio-leds";
                pinctrl-names = "default";
@@ -88,6 +91,10 @@
        status = "okay";
 };
 
+&codec {
+       status = "okay";
+};
+
 &ehci0 {
        status = "okay";
 };
@@ -96,6 +103,10 @@
        status = "okay";
 };
 
+&emac_sram {
+       status = "okay";
+};
+
 &emac {
        pinctrl-names = "default";
        pinctrl-0 = <&emac_pins_a>;
@@ -147,6 +158,10 @@
        status = "okay";
 };
 
+&otg_sram {
+       status = "okay";
+};
+
 &pio {
        led_pins_marsboard: led_pins@0 {
                allwinner,pins = "PB5", "PB6", "PB7", "PB8";
@@ -154,6 +169,13 @@
                allwinner,drive = <SUN4I_PINCTRL_10_MA>;
                allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
        };
+
+       usb0_id_detect_pin: usb0_id_detect_pin@0 {
+               allwinner,pins = "PH4";
+               allwinner,function = "gpio_in";
+               allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+               allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
+       };
 };
 
 &reg_usb1_vbus {
@@ -166,7 +188,8 @@
 
 &spi0 {
        pinctrl-names = "default";
-       pinctrl-0 = <&spi0_pins_a>;
+       pinctrl-0 = <&spi0_pins_a>,
+                   <&spi0_cs0_pins_a>;
        status = "okay";
 };
 
@@ -176,7 +199,15 @@
        status = "okay";
 };
 
+&usb_otg {
+       dr_mode = "otg";
+       status = "okay";
+};
+
 &usbphy {
+       pinctrl-names = "default";
+       pinctrl-0 = <&usb0_id_detect_pin>;
+       usb0_id_det-gpio = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
        usb1_vbus-supply = <&reg_usb1_vbus>;
        usb2_vbus-supply = <&reg_usb2_vbus>;
        status = "okay";