* publishhed by the Free Software Foundation.
*/
#include "stih407-pinctrl.dtsi"
-#include <dt-bindings/reset-controller/stih407-resets.h>
+#include <dt-bindings/mfd/st-lpc.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/reset/stih407-resets.h>
+#include <dt-bindings/interrupt-controller/irq-st.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <0>;
+ /* u-boot puts hpen in SBC dmem at 0xa4 offset */
+ cpu-release-addr = <0x94100A4>;
};
cpu@1 {
device_type = "cpu";
compatible = "arm,cortex-a9";
reg = <1>;
+ /* u-boot puts hpen in SBC dmem at 0xa4 offset */
+ cpu-release-addr = <0x94100A4>;
};
};
cache-level = <2>;
};
+ arm-pmu {
+ interrupt-parent = <&intc>;
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ pwm_regulator: pwm-regulator {
+ compatible = "pwm-regulator";
+ pwms = <&pwm1 3 8448>;
+ regulator-name = "CPU_1V0_AVS";
+ regulator-min-microvolt = <784000>;
+ regulator-max-microvolt = <1299000>;
+ regulator-always-on;
+ max-duty-cycle = <255>;
+ status = "okay";
+ };
+
soc {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "simple-bus";
+ restart {
+ compatible = "st,stih407-restart";
+ st,syscfg = <&syscfg_sbc_reg>;
+ status = "okay";
+ };
+
powerdown: powerdown-controller {
compatible = "st,stih407-powerdown";
#reset-cells = <1>;
reg = <0x94b5100 0x1000>;
};
+ irq-syscfg {
+ compatible = "st,stih407-irq-syscfg";
+ st,syscfg = <&syscfg_core>;
+ st,irq-device = <ST_IRQ_SYSCFG_PMU_0>,
+ <ST_IRQ_SYSCFG_PMU_1>;
+ st,fiq-device = <ST_IRQ_SYSCFG_DISABLED>,
+ <ST_IRQ_SYSCFG_DISABLED>;
+ };
+
+ /* Display */
+ vtg_main: sti-vtg-main@8d02800 {
+ compatible = "st,vtg";
+ reg = <0x8d02800 0x200>;
+ interrupts = <GIC_SPI 108 IRQ_TYPE_NONE>;
+ };
+
+ vtg_aux: sti-vtg-aux@8d00200 {
+ compatible = "st,vtg";
+ reg = <0x8d00200 0x100>;
+ interrupts = <GIC_SPI 109 IRQ_TYPE_NONE>;
+ };
+
serial@9830000 {
compatible = "st,asc";
reg = <0x9830000 0x2c>;
#phy-cells = <0>;
st,syscfg = <&syscfg_core 0x100 0xf4>;
resets = <&softreset STIH407_PICOPHY_SOFTRESET>,
- <&picophyreset STIH407_PICOPHY0_RESET>;
+ <&picophyreset STIH407_PICOPHY2_RESET>;
reset-names = "global", "port";
};
resets = <&softreset STIH407_MIPHY2_SOFTRESET>;
};
};
+
+ spi@9840000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9840000 0x110>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ pinctrl-0 = <&pinctrl_spi0_default>;
+ pinctrl-names = "default";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ status = "disabled";
+ };
+
+ spi@9841000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9841000 0x110>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi1_default>;
+
+ status = "disabled";
+ };
+
+ spi@9842000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9842000 0x110>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi2_default>;
+
+ status = "disabled";
+ };
+
+ spi@9843000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9843000 0x110>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi3_default>;
+
+ status = "disabled";
+ };
+
+ spi@9844000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9844000 0x110>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi4_default>;
+
+ status = "disabled";
+ };
+
+ /* SBC SSC */
+ spi@9540000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9540000 0x110>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_sysin>;
+ clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi10_default>;
+
+ status = "disabled";
+ };
+
+ spi@9541000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9541000 0x110>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_sysin>;
+ clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi11_default>;
+
+ status = "disabled";
+ };
+
+ spi@9542000 {
+ compatible = "st,comms-ssc4-spi";
+ reg = <0x9542000 0x110>;
+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_sysin>;
+ clock-names = "ssc";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spi12_default>;
+
+ status = "disabled";
+ };
+
+ mmc0: sdhci@09060000 {
+ compatible = "st,sdhci-stih407", "st,sdhci";
+ status = "disabled";
+ reg = <0x09060000 0x7ff>, <0x9061008 0x20>;
+ reg-names = "mmc", "top-mmc-delay";
+ interrupts = <GIC_SPI 92 IRQ_TYPE_NONE>;
+ interrupt-names = "mmcirq";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc0>;
+ clock-names = "mmc";
+ clocks = <&clk_s_c0_flexgen CLK_MMC_0>;
+ bus-width = <8>;
+ non-removable;
+ };
+
+ mmc1: sdhci@09080000 {
+ compatible = "st,sdhci-stih407", "st,sdhci";
+ status = "disabled";
+ reg = <0x09080000 0x7ff>;
+ reg-names = "mmc";
+ interrupts = <GIC_SPI 90 IRQ_TYPE_NONE>;
+ interrupt-names = "mmcirq";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sd1>;
+ clock-names = "mmc";
+ clocks = <&clk_s_c0_flexgen CLK_MMC_1>;
+ resets = <&softreset STIH407_MMC1_SOFTRESET>;
+ bus-width = <4>;
+ };
+
+ /* Watchdog and Real-Time Clock */
+ lpc@8787000 {
+ compatible = "st,stih407-lpc";
+ reg = <0x8787000 0x1000>;
+ interrupts = <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
+ timeout-sec = <120>;
+ st,syscfg = <&syscfg_core>;
+ st,lpc-mode = <ST_LPC_MODE_WDT>;
+ };
+
+ lpc@8788000 {
+ compatible = "st,stih407-lpc";
+ reg = <0x8788000 0x1000>;
+ interrupts = <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clk_s_d3_flexgen CLK_LPC_1>;
+ st,lpc-mode = <ST_LPC_MODE_RTC>;
+ };
+
+ sata0: sata@9b20000 {
+ compatible = "st,ahci";
+ reg = <0x9b20000 0x1000>;
+
+ interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
+ interrupt-names = "hostc";
+
+ phys = <&phy_port0 PHY_TYPE_SATA>;
+ phy-names = "ahci_phy";
+
+ resets = <&powerdown STIH407_SATA0_POWERDOWN>,
+ <&softreset STIH407_SATA0_SOFTRESET>,
+ <&softreset STIH407_SATA0_PWR_SOFTRESET>;
+ reset-names = "pwr-dwn", "sw-rst", "pwr-rst";
+
+ clock-names = "ahci_clk";
+ clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
+
+ status = "disabled";
+ };
+
+ sata1: sata@9b28000 {
+ compatible = "st,ahci";
+ reg = <0x9b28000 0x1000>;
+
+ interrupts = <GIC_SPI 170 IRQ_TYPE_NONE>;
+ interrupt-names = "hostc";
+
+ phys = <&phy_port1 PHY_TYPE_SATA>;
+ phy-names = "ahci_phy";
+
+ resets = <&powerdown STIH407_SATA1_POWERDOWN>,
+ <&softreset STIH407_SATA1_SOFTRESET>,
+ <&softreset STIH407_SATA1_PWR_SOFTRESET>;
+ reset-names = "pwr-dwn",
+ "sw-rst",
+ "pwr-rst";
+
+ clock-names = "ahci_clk";
+ clocks = <&clk_s_c0_flexgen CLK_ICN_REG>;
+
+ status = "disabled";
+ };
+
+
+ st_dwc3: dwc3@8f94000 {
+ compatible = "st,stih407-dwc3";
+ reg = <0x08f94000 0x1000>, <0x110 0x4>;
+ reg-names = "reg-glue", "syscfg-reg";
+ st,syscfg = <&syscfg_core>;
+ resets = <&powerdown STIH407_USB3_POWERDOWN>,
+ <&softreset STIH407_MIPHY2_SOFTRESET>;
+ reset-names = "powerdown", "softreset";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb3>;
+ ranges;
+
+ status = "disabled";
+
+ dwc3: dwc3@9900000 {
+ compatible = "snps,dwc3";
+ reg = <0x09900000 0x100000>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>;
+ dr_mode = "host";
+ phy-names = "usb2-phy", "usb3-phy";
+ phys = <&usb2_picophy0>,
+ <&phy_port2 PHY_TYPE_USB3>;
+ };
+ };
+
+ /* COMMS PWM Module */
+ pwm0: pwm@9810000 {
+ compatible = "st,sti-pwm";
+ #pwm-cells = <2>;
+ reg = <0x9810000 0x68>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0_chan0_default>;
+ clock-names = "pwm";
+ clocks = <&clk_sysin>;
+ st,pwm-num-chan = <1>;
+
+ status = "disabled";
+ };
+
+ /* SBC PWM Module */
+ pwm1: pwm@9510000 {
+ compatible = "st,sti-pwm";
+ #pwm-cells = <2>;
+ reg = <0x9510000 0x68>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1_chan0_default
+ &pinctrl_pwm1_chan1_default
+ &pinctrl_pwm1_chan2_default
+ &pinctrl_pwm1_chan3_default>;
+ clock-names = "pwm";
+ clocks = <&clk_sysin>;
+ st,pwm-num-chan = <4>;
+
+ status = "disabled";
+ };
+
+ rng10: rng@08a89000 {
+ compatible = "st,rng";
+ reg = <0x08a89000 0x1000>;
+ clocks = <&clk_sysin>;
+ status = "okay";
+ };
+
+ rng11: rng@08a8a000 {
+ compatible = "st,rng";
+ reg = <0x08a8a000 0x1000>;
+ clocks = <&clk_sysin>;
+ status = "okay";
+ };
+
+ ethernet0: dwmac@9630000 {
+ device_type = "network";
+ status = "disabled";
+ compatible = "st,stih407-dwmac", "snps,dwmac", "snps,dwmac-3.710";
+ reg = <0x9630000 0x8000>, <0x80 0x4>;
+ reg-names = "stmmaceth", "sti-ethconf";
+
+ st,syscon = <&syscfg_sbc_reg 0x80>;
+ st,gmac_en;
+ resets = <&softreset STIH407_ETH1_SOFTRESET>;
+ reset-names = "stmmaceth";
+
+ interrupts = <GIC_SPI 98 IRQ_TYPE_NONE>,
+ <GIC_SPI 99 IRQ_TYPE_NONE>;
+ interrupt-names = "macirq", "eth_wake_irq";
+
+ /* DMA Bus Mode */
+ snps,pbl = <8>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_rgmii1>;
+
+ clock-names = "stmmaceth", "sti-ethclk";
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>,
+ <&clk_s_c0_flexgen CLK_ETH_PHY>;
+ };
+
+ rng10: rng@08a89000 {
+ compatible = "st,rng";
+ reg = <0x08a89000 0x1000>;
+ clocks = <&clk_sysin>;
+ status = "okay";
+ };
+
+ rng11: rng@08a8a000 {
+ compatible = "st,rng";
+ reg = <0x08a8a000 0x1000>;
+ clocks = <&clk_sysin>;
+ status = "okay";
+ };
};
};
Code Review / kvmfornfv.git / blobdiff