These changes are the raw update to linux-4.4.6-rt14. Kernel sources

[kvmfornfv.git] / kernel / arch / arm / boot / dts / qcom-apq8064-cm-qs600.dts

diff --git a/kernel/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts b/kernel/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
index 5d75666..03784f1 100644 (file)
--- a/kernel/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
+++ b/kernel/arch/arm/boot/dts/qcom-apq8064-cm-qs600.dts
@@ -1,15 +1,107 @@
 #include "qcom-apq8064-v2.0.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
        model = "CompuLab CM-QS600";
        compatible = "qcom,apq8064-cm-qs600", "qcom,apq8064";
 
+       aliases {
+               serial0 = &gsbi7_serial;
+       };
+
+       chosen {
+               stdout-path = "serial0:115200n8";
+       };
+
+       pwrseq {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+               compatible = "simple-bus";
+
+               sdcc4_pwrseq: sdcc4_pwrseq {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&wlan_default_gpios>;
+                       compatible = "mmc-pwrseq-simple";
+                       reset-gpios = <&pm8921_gpio 43 GPIO_ACTIVE_LOW>;
+               };
+       };
+
        soc {
                pinctrl@800000 {
-                       i2c1_pins: i2c1 {
+                       card_detect: card_detect {
                                mux {
-                                       pins = "gpio20", "gpio21";
-                                       function = "gsbi1";
+                                       pins = "gpio26";
+                                       function = "gpio";
+                                       bias-disable;
+                               };
+                       };
+               };
+
+               rpm@108000 {
+                       regulators {
+                               vin_lvs1_3_6-supply = <&pm8921_s4>;
+                               vin_lvs2-supply = <&pm8921_s1>;
+                               vin_lvs4_5_7-supply = <&pm8921_s4>;
+
+                               vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+                               vdd_l24-supply = <&pm8921_s1>;
+                               vdd_l25-supply = <&pm8921_s1>;
+                               vdd_l26-supply = <&pm8921_s7>;
+                               vdd_l27-supply = <&pm8921_s7>;
+                               vdd_l28-supply = <&pm8921_s7>;
+
+
+                               /* Buck SMPS */
+                               pm8921_s1: s1 {
+                                       regulator-always-on;
+                                       regulator-min-microvolt = <1225000>;
+                                       regulator-max-microvolt = <1225000>;
+                                       qcom,switch-mode-frequency = <3200000>;
+                                       bias-pull-down;
+                               };
+
+                               pm8921_s3: s3 {
+                                       regulator-min-microvolt = <1000000>;
+                                       regulator-max-microvolt = <1400000>;
+                                       qcom,switch-mode-frequency = <4800000>;
+                               };
+
+                               pm8921_s4: s4 {
+                                       regulator-min-microvolt = <1800000>;
+                                       regulator-max-microvolt = <1800000>;
+                                       qcom,switch-mode-frequency = <3200000>;
+                               };
+
+                               pm8921_s7: s7 {
+                                       regulator-min-microvolt = <1300000>;
+                                       regulator-max-microvolt = <1300000>;
+                                       qcom,switch-mode-frequency = <3200000>;
+                               };
+
+                               pm8921_l3: l3 {
+                                       regulator-min-microvolt = <3050000>;
+                                       regulator-max-microvolt = <3300000>;
+                                       bias-pull-down;
+                               };
+
+                               pm8921_l4: l4 {
+                                       regulator-min-microvolt = <1000000>;
+                                       regulator-max-microvolt = <1800000>;
+                                       bias-pull-down;
+                               };
+
+                               pm8921_l5: l5 {
+                                       regulator-min-microvolt = <2750000>;
+                                       regulator-max-microvolt = <3000000>;
+                                       bias-pull-down;
+                               };
+
+                               pm8921_l23: l23 {
+                                       regulator-min-microvolt = <1700000>;
+                                       regulator-max-microvolt = <1900000>;
+                                       bias-pull-down;
                                };
                        };
                };
@@ -21,10 +113,8 @@
                        i2c@12460000 {
                                status = "okay";
                                clock-frequency = <200000>;
-                               pinctrl-0 = <&i2c1_pins>;
-                               pinctrl-names = "default";
 
-                               eeprom: eeprom@50 {
+                               eeprom@50 {
                                        compatible = "24c02";
                                        reg = <0x50>;
                                        pagesize = <32>;
@@ -37,6 +127,71 @@
                        qcom,mode = <GSBI_PROT_I2C_UART>;
                        serial@16640000 {
                                status = "ok";
+                               pinctrl-names = "default";
+                               pinctrl-0 = <&gsbi7_uart_2pins>;
+                       };
+               };
+
+               /* OTG */
+               usb1_phy: phy@12500000 {
+                       status          = "okay";
+                       vddcx-supply    = <&pm8921_s3>;
+                       v3p3-supply     = <&pm8921_l3>;
+                       v1p8-supply     = <&pm8921_l4>;
+               };
+
+               usb3_phy: phy@12520000 {
+                       status          = "okay";
+                       vddcx-supply    = <&pm8921_s3>;
+                       v3p3-supply     = <&pm8921_l3>;
+                       v1p8-supply     = <&pm8921_l23>;
+               };
+
+               usb4_phy: phy@12530000 {
+                       status          = "okay";
+                       vddcx-supply    = <&pm8921_s3>;
+                       v3p3-supply     = <&pm8921_l3>;
+                       v1p8-supply     = <&pm8921_l23>;
+               };
+
+               gadget1: gadget@12500000 {
+                       status = "ok";
+               };
+
+               /* OTG */
+               usb1: usb@12500000 {
+                       status = "ok";
+               };
+
+               usb3: usb@12520000 {
+                       status = "okay";
+               };
+
+               usb4: usb@12530000 {
+                       status = "okay";
+               };
+
+               /* on board fixed 3.3v supply */
+               v3p3_fixed: v3p3 {
+                       compatible = "regulator-fixed";
+                       regulator-name = "PCIE V3P3";
+                       regulator-min-microvolt = <3300000>;
+                       regulator-max-microvolt = <3300000>;
+                       regulator-always-on;
+               };
+
+               qcom,ssbi@500000 {
+                       pmic@0 {
+                               gpio@150 {
+                                       wlan_default_gpios: wlan-gpios {
+                                               pios {
+                                                       pins = "gpio43";
+                                                       function = "normal";
+                                                       bias-disable;
+                                                       power-source = <PM8921_GPIO_S4>;
+                                               };
+                                       };
+                               };
                        };
                };
 
@@ -44,15 +199,24 @@
                        /* eMMC */
                        sdcc1: sdcc@12400000 {
                                status = "okay";
+                               vmmc-supply = <&pm8921_l5>;
+                               vqmmc-supply = <&pm8921_s4>;
                        };
 
                        /* External micro SD card */
                        sdcc3: sdcc@12180000 {
                                status = "okay";
+                               vmmc-supply = <&v3p3_fixed>;
+                               pinctrl-names   = "default";
+                               pinctrl-0       = <&card_detect>;
+                               cd-gpios        = <&tlmm_pinmux 26 GPIO_ACTIVE_LOW>;
                        };
                        /* WLAN */
                        sdcc4: sdcc@121c0000 {
                                status = "okay";
+                               vmmc-supply = <&v3p3_fixed>;
+                               vqmmc-supply = <&v3p3_fixed>;
+                               mmc-pwrseq = <&sdcc4_pwrseq>;
                        };
                };
        };