These changes are the raw update to linux-4.4.6-rt14. Kernel sources

[kvmfornfv.git] / kernel / arch / arm / boot / dts / imx23.dtsi

diff --git a/kernel/arch/arm/boot/dts/imx23.dtsi b/kernel/arch/arm/boot/dts/imx23.dtsi
index 0cb8b0b..1c6c075 100644 (file)
--- a/kernel/arch/arm/boot/dts/imx23.dtsi
+++ b/kernel/arch/arm/boot/dts/imx23.dtsi
@@ -308,6 +308,39 @@
                                        fsl,voltage = <MXS_VOLTAGE_HIGH>;
                                        fsl,pull-up = <MXS_PULL_ENABLE>;
                                };
+
+                               i2c_pins_a: i2c@0 {
+                                       reg = <0>;
+                                       fsl,pinmux-ids = <
+                                               MX23_PAD_I2C_SCL__I2C_SCL
+                                               MX23_PAD_I2C_SDA__I2C_SDA
+                                       >;
+                                       fsl,drive-strength = <MXS_DRIVE_8mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
+                               };
+
+                               i2c_pins_b: i2c@1 {
+                                       reg = <1>;
+                                       fsl,pinmux-ids = <
+                                               MX23_PAD_LCD_ENABLE__I2C_SCL
+                                               MX23_PAD_LCD_HSYNC__I2C_SDA
+                                       >;
+                                       fsl,drive-strength = <MXS_DRIVE_8mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
+                               };
+
+                               i2c_pins_c: i2c@2 {
+                                       reg = <2>;
+                                       fsl,pinmux-ids = <
+                                               MX23_PAD_SSP1_DATA1__I2C_SCL
+                                               MX23_PAD_SSP1_DATA2__I2C_SDA
+                                       >;
+                                       fsl,drive-strength = <MXS_DRIVE_8mA>;
+                                       fsl,voltage = <MXS_VOLTAGE_HIGH>;
+                                       fsl,pull-up = <MXS_PULL_ENABLE>;
+                               };
                        };
 
                        digctl@8001c000 {
@@ -350,9 +383,11 @@
                        };
 
                        ocotp@8002c000 {
-                               compatible = "fsl,ocotp";
+                               compatible = "fsl,imx23-ocotp", "fsl,ocotp";
+                               #address-cells = <1>;
+                               #size-cells = <1>;
                                reg = <0x8002c000 0x2000>;
-                               status = "disabled";
+                               clocks = <&clks 15>;
                        };
 
                        axi-ahb@8002e000 {
@@ -445,8 +480,13 @@
                                status = "disabled";
                        };
 
-                       i2c@80058000 {
+                       i2c: i2c@80058000 {
+                               #address-cells = <1>;
+                               #size-cells = <0>;
+                               compatible = "fsl,imx23-i2c";
                                reg = <0x80058000 0x2000>;
+                               interrupts = <27>;
+                               clock-frequency = <100000>;
                                dmas = <&dma_apbx 3>;
                                dma-names = "rx-tx";
                                status = "disabled";