These changes are the raw update to linux-4.4.6-rt14. Kernel sources

[kvmfornfv.git] / kernel / arch / arm / boot / dts / exynos5440-ssdk5440.dts

diff --git a/kernel/arch/arm/boot/dts/exynos5440-ssdk5440.dts b/kernel/arch/arm/boot/dts/exynos5440-ssdk5440.dts
index ff55dac..6a0d802 100644 (file)
--- a/kernel/arch/arm/boot/dts/exynos5440-ssdk5440.dts
+++ b/kernel/arch/arm/boot/dts/exynos5440-ssdk5440.dts
@@ -11,6 +11,7 @@
 
 /dts-v1/;
 #include "exynos5440.dtsi"
+#include <dt-bindings/gpio/gpio.h>
 
 / {
        model = "SAMSUNG SSDK5440 board based on EXYNOS5440";
@@ -20,59 +21,58 @@
                bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";
        };
 
-       spi_0: spi@D0000 {
-
-               flash: w25q128@0 {
-                       #address-cells = <1>;
-                       #size-cells = <1>;
-                       compatible = "winbond,w25q128";
-                       spi-max-frequency = <15625000>;
-                       reg = <0>;
-                       controller-data {
-                               samsung,spi-feedback-delay = <0>;
-                       };
+       fixed-rate-clocks {
+               xtal {
+                       compatible = "samsung,clock-xtal";
+                       clock-frequency = <50000000>;
+               };
+       };
+};
 
-                       partition@00000 {
-                               label = "BootLoader";
-                               reg = <0x60000 0x80000>;
-                               read-only;
-                       };
+&pcie_0 {
+       reset-gpio = <&pin_ctrl 5 GPIO_ACTIVE_HIGH>;
+       status = "okay";
+};
 
-                       partition@e0000 {
-                               label = "Recovery-Kernel";
-                               reg = <0xe0000 0x300000>;
-                               read-only;
-                       };
+&pcie_1 {
+       reset-gpio = <&pin_ctrl 22 GPIO_ACTIVE_HIGH>;
+       status = "okay";
+};
 
-                       partition@3e0000 {
-                               label = "CRAM-FS";
-                               reg = <0x3e0000 0x700000>;
-                               read-only;
-                       };
+&spi_0 {
+       flash: w25q128@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "winbond,w25q128";
+               spi-max-frequency = <15625000>;
+               reg = <0>;
+               controller-data {
+                       samsung,spi-feedback-delay = <0>;
+               };
 
-                       partition@ae0000 {
-                               label = "User-Data";
-                               reg = <0xae0000 0x520000>;
-                       };
+               partition@00000 {
+                       label = "BootLoader";
+                       reg = <0x60000 0x80000>;
+                       read-only;
+               };
 
+               partition@e0000 {
+                       label = "Recovery-Kernel";
+                       reg = <0xe0000 0x300000>;
+                       read-only;
                };
 
-       };
+               partition@3e0000 {
+                       label = "CRAM-FS";
+                       reg = <0x3e0000 0x700000>;
+                       read-only;
+               };
 
-       fixed-rate-clocks {
-               xtal {
-                       compatible = "samsung,clock-xtal";
-                       clock-frequency = <50000000>;
+               partition@ae0000 {
+                       label = "User-Data";
+                       reg = <0xae0000 0x520000>;
                };
-       };
 
-       pcie@290000 {
-               reset-gpio = <&pin_ctrl 5 0>;
-               status = "okay";
        };
 
-       pcie@2a0000 {
-               reset-gpio = <&pin_ctrl 22 0>;
-               status = "okay";
-       };
 };