These changes are the raw update to linux-4.4.6-rt14. Kernel sources

[kvmfornfv.git] / kernel / arch / arm / boot / dts / bcm7445.dtsi

diff --git a/kernel/arch/arm/boot/dts/bcm7445.dtsi b/kernel/arch/arm/boot/dts/bcm7445.dtsi
index 39ac784..4791321 100644 (file)
--- a/kernel/arch/arm/boot/dts/bcm7445.dtsi
+++ b/kernel/arch/arm/boot/dts/bcm7445.dtsi
@@ -108,6 +108,199 @@
                        brcm,int-map-mask = <0x25c>, <0x7000000>;
                        brcm,int-fwd-mask = <0x70000>;
                };
+
+               irq0_aon_intc: interrupt-controller@417280 {
+                       compatible = "brcm,bcm7120-l2-intc";
+                       reg = <0x417280 0x8>;
+                       interrupt-parent = <&gic>;
+                       #interrupt-cells = <1>;
+                       interrupt-controller;
+                       interrupts = <GIC_SPI 0x46 0x0>,
+                                    <GIC_SPI 0x44 0x0>,
+                                    <GIC_SPI 0x49 0x0>;
+                       brcm,int-map-mask = <0x1e3 0x18000000 0x100000>;
+                       brcm,int-fwd-mask = <0x0>;
+                       brcm,irq-can-wake;
+               };
+
+               hif_intr2_intc: interrupt-controller@3e1000 {
+                       compatible = "brcm,l2-intc";
+                       reg = <0x3e1000 0x30>;
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+                       interrupts = <GIC_SPI 0x20 0x0>;
+                       interrupt-parent = <&gic>;
+                       interrupt-names = "hif";
+               };
+
+                aon_pm_l2_intc: interrupt-controller@410640 {
+                       compatible = "brcm,l2-intc";
+                       reg = <0x410640 0x30>;
+                       interrupt-controller;
+                       #interrupt-cells = <1>;
+                       interrupts = <GIC_SPI 0x40 0x0>;
+                       interrupt-parent = <&gic>;
+                       brcm,irq-can-wake;
+               };
+
+               aon-ctrl@410000 {
+                       compatible = "brcm,brcmstb-aon-ctrl";
+                       reg = <0x410000 0x200>, <0x410200 0x400>;
+                       reg-names = "aon-ctrl", "aon-sram";
+               };
+
+               nand: nand@3e2800 {
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+                       compatible = "brcm,brcmnand-v7.1", "brcm,brcmnand";
+                       reg-names = "nand", "flash-dma";
+                       reg = <0x3e2800 0x600>, <0x3e3000 0x2c>;
+                       interrupt-parent = <&hif_intr2_intc>;
+                       interrupts = <24>, <4>;
+                       interrupt-names = "nand_ctlrdy", "flash_dma_done";
+               };
+
+               sata@45a000 {
+                       compatible = "brcm,bcm7445-ahci", "brcm,sata3-ahci";
+                       reg-names = "ahci", "top-ctrl";
+                       reg = <0x45a000 0xa9c>, <0x458040 0x24>;
+                       interrupts = <GIC_SPI 30 0>;
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       sata0: sata-port@0 {
+                               reg = <0>;
+                               phys = <&sata_phy0>;
+                       };
+
+                       sata1: sata-port@1 {
+                               reg = <1>;
+                               phys = <&sata_phy1>;
+                       };
+               };
+
+               sata_phy: sata-phy@458100 {
+                       compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
+                       reg = <0x458100 0x1f00>;
+                       reg-names = "phy";
+                       #address-cells = <0x1>;
+                       #size-cells = <0x0>;
+
+                       sata_phy0: sata-phy@0 {
+                               reg = <0>;
+                               #phy-cells = <0>;
+                       };
+
+                       sata_phy1: sata-phy@1 {
+                               reg = <1>;
+                               #phy-cells = <0>;
+                       };
+               };
+
+               upg_gio: gpio@40a700 {
+                       compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+                       reg = <0x40a700 0x80>;
+                       #gpio-cells = <2>;
+                       #interrupt-cells = <2>;
+                       gpio-controller;
+                       interrupt-controller;
+                       interrupt-parent = <&irq0_intc>;
+                       interrupts = <6>;
+                       brcm,gpio-bank-widths = <32 32 32 24>;
+               };
+
+               upg_gio_aon: gpio@4172c0 {
+                       compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+                       reg = <0x4172c0 0x40>;
+                       #gpio-cells = <2>;
+                       #interrupt-cells = <2>;
+                       gpio-controller;
+                       interrupt-controller;
+                       interrupts-extended = <&irq0_aon_intc 0x6>,
+                                             <&aon_pm_l2_intc 0x5>;
+                       wakeup-source;
+                       brcm,gpio-bank-widths = <18 4>;
+               };
+
+       };
+
+       memory_controllers {
+               compatible = "simple-bus";
+               ranges = <0x0 0x0 0xf1100000 0x200000>;
+               #address-cells = <1>;
+               #size-cells = <1>;
+
+               memc@0 {
+                       compatible = "brcm,brcmstb-memc", "simple-bus";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <0x0 0x0 0x80000>;
+
+                       memc-ddr@2000 {
+                               compatible = "brcm,brcmstb-memc-ddr";
+                               reg = <0x2000 0x800>;
+                       };
+
+                       ddr-phy@6000 {
+                               compatible = "brcm,brcmstb-ddr-phy-v240.1";
+                               reg = <0x6000 0x21c>;
+                               };
+
+                       shimphy@8000 {
+                               compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+                               reg = <0x8000 0xe4>;
+                       };
+               };
+
+               memc@1 {
+                       compatible = "brcm,brcmstb-memc", "simple-bus";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <0x0 0x80000 0x80000>;
+
+                       memc-ddr@2000 {
+                               compatible = "brcm,brcmstb-memc-ddr";
+                               reg = <0x2000 0x800>;
+                       };
+
+                       ddr-phy@6000 {
+                               compatible = "brcm,brcmstb-ddr-phy-v240.1";
+                               reg = <0x6000 0x21c>;
+                       };
+
+                       shimphy@8000 {
+                               compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+                               reg = <0x8000 0xe4>;
+                       };
+               };
+
+               memc@2 {
+                       compatible = "brcm,brcmstb-memc", "simple-bus";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+                       ranges = <0x0 0x100000 0x80000>;
+
+                       memc-ddr@2000 {
+                               compatible = "brcm,brcmstb-memc-ddr";
+                               reg = <0x2000 0x800>;
+                       };
+
+                       ddr-phy@6000 {
+                               compatible = "brcm,brcmstb-ddr-phy-v240.1";
+                               reg = <0x6000 0x21c>;
+                       };
+
+                       shimphy@8000 {
+                               compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+                               reg = <0x8000 0xe4>;
+                       };
+               };
+       };
+
+       sram@ffe00000 {
+               compatible = "brcm,boot-sram", "mmio-sram";
+               reg = <0x0 0xffe00000 0x0 0x10000>;
        };
 
        smpboot {