These changes are the raw update to linux-4.4.6-rt14. Kernel sources
[kvmfornfv.git] / kernel / arch / arm / boot / dts / am4372.dtsi
index c80a3e2..de8791a 100644 (file)
                i2c1 = &i2c1;
                i2c2 = &i2c2;
                serial0 = &uart0;
+               serial1 = &uart1;
+               serial2 = &uart2;
+               serial3 = &uart3;
+               serial4 = &uart4;
+               serial5 = &uart5;
                ethernet0 = &cpsw_emac0;
                ethernet1 = &cpsw_emac1;
        };
                interrupt-parent = <&gic>;
        };
 
+       scu: scu@48240000 {
+               compatible = "arm,cortex-a9-scu";
+               reg = <0x48240000 0x100>;
+       };
+
+       global_timer: timer@48240200 {
+               compatible = "arm,cortex-a9-global-timer";
+               reg = <0x48240200 0x100>;
+               interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+               interrupt-parent = <&gic>;
+               clocks = <&mpu_periphclk>;
+       };
+
+       local_timer: timer@48240600 {
+               compatible = "arm,cortex-a9-twd-timer";
+               reg = <0x48240600 0x100>;
+               interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+               interrupt-parent = <&gic>;
+               clocks = <&mpu_periphclk>;
+       };
+
        l2-cache-controller@48242000 {
                compatible = "arm,pl310-cache";
                reg = <0x48242000 0x1000>;
                        #size-cells = <1>;
                        ranges = <0 0x44c00000 0x287000>;
 
+                       wkup_m3: wkup_m3@100000 {
+                               compatible = "ti,am4372-wkup-m3";
+                               reg = <0x100000 0x4000>,
+                                     <0x180000 0x2000>;
+                               reg-names = "umem", "dmem";
+                               ti,hwmods = "wkup_m3";
+                               ti,pm-firmware = "am335x-pm-firmware.elf";
+                       };
+
                        prcm: prcm@1f0000 {
                                compatible = "ti,am4-prcm";
                                reg = <0x1f0000 0x11000>;
+                               interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 
                                prcm_clocks: clocks {
                                        #address-cells = <1>;
                                        };
                                };
 
+                               wkup_m3_ipc: wkup_m3_ipc@1324 {
+                                       compatible = "ti,am4372-wkup-m3-ipc";
+                                       reg = <0x1324 0x44>;
+                                       interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+                                       ti,rproc = <&wkup_m3>;
+                                       mboxes = <&mailbox &mbox_wkupm3>;
+                               };
+
                                scm_clockdomains: clockdomains {
                                };
                        };
                };
 
+               emif: emif@4c000000 {
+                       compatible = "ti,emif-am4372";
+                       reg = <0x4c000000 0x1000000>;
+                       ti,hwmods = "emif";
+               };
+
                edma: edma@49000000 {
                        compatible = "ti,edma3";
                        ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
                };
 
                rtc: rtc@44e3e000 {
-                       compatible = "ti,am4372-rtc","ti,da830-rtc";
+                       compatible = "ti,am4372-rtc", "ti,am3352-rtc",
+                                    "ti,da830-rtc";
                        reg = <0x44e3e000 0x1000>;
                        interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH
                                      GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
                        ti,hwmods = "rtc";
+                       clocks = <&clk_32768_ck>;
+                       clock-names = "int-clk";
                        status = "disabled";
                };
 
                        #address-cells = <1>;
                        #size-cells = <1>;
                        ti,hwmods = "cpgmac0";
-                       clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
-                       clock-names = "fck", "cpts";
+                       clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>,
+                                <&dpll_clksel_mac_clk>;
+                       clock-names = "fck", "cpts", "50mclk";
+                       assigned-clocks = <&dpll_clksel_mac_clk>;
+                       assigned-clock-rates = <50000000>;
                        status = "disabled";
                        cpdma_channels = <8>;
                        ale_entries = <1024>;
                        cpts_clock_mult = <0x80000000>;
                        cpts_clock_shift = <29>;
                        ranges;
+                       syscon = <&scm_conf>;
 
                        davinci_mdio: mdio@4a101000 {
                                compatible = "ti,am4372-mdio","ti,davinci_mdio";
                        usb1: usb@48390000 {
                                compatible = "synopsys,dwc3";
                                reg = <0x48390000 0x10000>;
-                               interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupt-names = "peripheral",
+                                                 "host",
+                                                 "otg";
                                phys = <&usb2_phy1>;
                                phy-names = "usb2-phy";
                                maximum-speed = "high-speed";
                        usb2: usb@483d0000 {
                                compatible = "synopsys,dwc3";
                                reg = <0x483d0000 0x10000>;
-                               interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupt-names = "peripheral",
+                                                 "host",
+                                                 "otg";
                                phys = <&usb2_phy2>;
                                phy-names = "usb2-phy";
                                maximum-speed = "high-speed";
                                ti,hwmods = "dss_rfbi";
                                clocks = <&disp_clk>;
                                clock-names = "fck";
+                               status = "disabled";
                        };
                };