select CLONE_BACKWARDS
select CPU_PM if (SUSPEND || CPU_IDLE)
select DCACHE_WORD_ACCESS if HAVE_EFFICIENT_UNALIGNED_ACCESS
+ select EDAC_SUPPORT
+ select EDAC_ATOMIC_SCRUB
select GENERIC_ALLOCATOR
select GENERIC_ATOMIC64 if (CPU_V7M || CPU_V6 || !CPU_32v6K || !AEABI)
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
select HARDIRQS_SW_RESEND
select HAVE_ARCH_AUDITSYSCALL if (AEABI && !OABI_COMPAT)
select HAVE_ARCH_BITREVERSE if (CPU_32v7M || CPU_32v7) && !CPU_32v6
- select HAVE_ARCH_JUMP_LABEL if (!XIP_KERNEL && !PREEMPT_RT_BASE)
- select HAVE_ARCH_KGDB
+ select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !PREEMPT_RT_BASE
+ select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32
select HAVE_ARCH_SECCOMP_FILTER if (AEABI && !OABI_COMPAT)
select HAVE_ARCH_TRACEHOOK
select HAVE_BPF_JIT
select HAVE_DMA_API_DEBUG
select HAVE_DMA_ATTRS
select HAVE_DMA_CONTIGUOUS if MMU
- select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
+ select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) && !CPU_ENDIAN_BE32
select HAVE_EFFICIENT_UNALIGNED_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && MMU
select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL)
select HAVE_KERNEL_LZMA
select HAVE_KERNEL_LZO
select HAVE_KERNEL_XZ
- select HAVE_KPROBES if !XIP_KERNEL
+ select HAVE_KPROBES if !XIP_KERNEL && !CPU_ENDIAN_BE32 && !CPU_V7M
select HAVE_KRETPROBES if (HAVE_KPROBES)
select HAVE_MEMBLOCK
- select HAVE_MOD_ARCH_SPECIFIC if ARM_UNWIND
+ select HAVE_MOD_ARCH_SPECIFIC
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_OPTPROBES if !THUMB2_KERNEL
select HAVE_PERF_EVENTS
select IRQ_FORCED_THREADING
select MODULES_USE_ELF_REL
select NO_BOOTMEM
+ select OF_EARLY_FLATTREE if OF
+ select OF_RESERVED_MEM if OF
select OLD_SIGACTION
select OLD_SIGSUSPEND3
select PERF_USE_VMALLOC
config TRACE_IRQFLAGS_SUPPORT
bool
- default y
+ default !CPU_V7M
config RWSEM_XCHGADD_ALGORITHM
bool
config ARCH_HAS_BANDGAP
bool
+config FIX_EARLYCON_MEM
+ def_bool y if MMU
+
config GENERIC_HWEIGHT
bool
default y
depends on !ARM_PATCH_PHYS_VIRT
default DRAM_BASE if !MMU
default 0x00000000 if ARCH_EBSA110 || \
- EP93XX_SDCE3_SYNC_PHYS_OFFSET || \
ARCH_FOOTBRIDGE || \
ARCH_INTEGRATOR || \
ARCH_IOP13XX || \
default 0x10000000 if ARCH_OMAP1 || ARCH_RPC
default 0x20000000 if ARCH_S5PV210
default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET
- default 0xc0000000 if EP93XX_SDCE0_PHYS_OFFSET || ARCH_SA1100
- default 0xd0000000 if EP93XX_SDCE1_PHYS_OFFSET
- default 0xe0000000 if EP93XX_SDCE2_PHYS_OFFSET
- default 0xf0000000 if EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+ default 0xc0000000 if ARCH_SA1100
help
Please provide the physical address corresponding to the
location of main memory in your system.
select SPARSE_IRQ
select USE_OF
+config ARM_SINGLE_ARMV7M
+ bool "ARMv7-M based platforms (Cortex-M0/M3/M4)"
+ depends on !MMU
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select ARM_NVIC
+ select AUTO_ZRELADDR
+ select CLKSRC_OF
+ select COMMON_CLK
+ select CPU_V7M
+ select GENERIC_CLOCKEVENTS
+ select NO_IOPORT_MAP
+ select SPARSE_IRQ
+ select USE_OF
+
config ARCH_REALVIEW
bool "ARM Ltd. RealView family"
select ARCH_WANT_OPTIONAL_GPIOLIB
Ethernet interface, two PCMCIA sockets, two serial ports and a
parallel port.
-config ARCH_EFM32
- bool "Energy Micro efm32"
- depends on !MMU
- select ARCH_REQUIRE_GPIOLIB
- select ARM_NVIC
- select AUTO_ZRELADDR
- select CLKSRC_OF
- select COMMON_CLK
- select CPU_V7M
- select GENERIC_CLOCKEVENTS
- select NO_DMA
- select NO_IOPORT_MAP
- select SPARSE_IRQ
- select USE_OF
- help
- Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
- processors.
-
config ARCH_EP93XX
bool "EP93xx-based"
select ARCH_HAS_HOLES_MEMORYMODEL
select ARCH_REQUIRE_GPIOLIB
- select ARCH_USES_GETTIMEOFFSET
select ARM_AMBA
+ select ARM_PATCH_PHYS_VIRT
select ARM_VIC
+ select AUTO_ZRELADDR
select CLKDEV_LOOKUP
+ select CLKSRC_MMIO
select CPU_ARM920T
+ select GENERIC_CLOCKEVENTS
help
This enables support for the Cirrus EP93xx series of CPUs.
select ARCH_REQUIRE_GPIOLIB
select ARM_CPU_SUSPEND if PM
select AUTO_ZRELADDR
+ select COMMON_CLK
select CLKDEV_LOOKUP
select CLKSRC_MMIO
select CLKSRC_OF
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
-config ARCH_SHMOBILE_LEGACY
- bool "Renesas ARM SoCs (non-multiplatform)"
- select ARCH_SHMOBILE
- select ARM_PATCH_PHYS_VIRT if MMU
- select CLKDEV_LOOKUP
- select CPU_V7
- select GENERIC_CLOCKEVENTS
- select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if SMP
- select HAVE_SMP
- select MIGHT_HAVE_CACHE_L2X0
- select MULTI_IRQ_HANDLER
- select NO_IOPORT_MAP
- select PINCTRL
- select PM_GENERIC_DOMAINS if PM
- select SH_CLK_CPG
- select SPARSE_IRQ
- help
- Support for Renesas ARM SoC platforms using a non-multiplatform
- kernel. This includes the SH-Mobile, R-Mobile, EMMA-Mobile, R-Car
- and RZ families.
-
config ARCH_RPC
bool "RiscPC"
+ depends on MMU
select ARCH_ACORN
select ARCH_MAY_HAVE_PC_FDC
select ARCH_SPARSEMEM_ENABLE
select GENERIC_CLOCKEVENTS
select GENERIC_IRQ_CHIP
select HAVE_IDE
- select TI_PRIV_EDMA
select USE_OF
select ZONE_DMA
help
select GENERIC_IRQ_CHIP
select HAVE_IDE
select IRQ_DOMAIN
+ select MULTI_IRQ_HANDLER
select NEED_MACH_IO_H if PCCARD
select NEED_MACH_MEMORY_H
+ select SPARSE_IRQ
help
Support for older TI OMAP1 (omap7xx, omap15xx or omap16xx)
bool "Dummy Virtual Machine" if ARCH_MULTI_V7
select ARM_AMBA
select ARM_GIC
+ select ARM_GIC_V3
select ARM_PSCI
select HAVE_ARM_ARCH_TIMER
source "arch/arm/mach-u300/Kconfig"
+source "arch/arm/mach-uniphier/Kconfig"
+
source "arch/arm/mach-ux500/Kconfig"
source "arch/arm/mach-versatile/Kconfig"
source "arch/arm/mach-w90x900/Kconfig"
+source "arch/arm/mach-zx/Kconfig"
+
source "arch/arm/mach-zynq/Kconfig"
+# ARMv7-M architecture
+config ARCH_EFM32
+ bool "Energy Micro efm32"
+ depends on ARM_SINGLE_ARMV7M
+ select ARCH_REQUIRE_GPIOLIB
+ help
+ Support for Energy Micro's (now Silicon Labs) efm32 Giant Gecko
+ processors.
+
+config ARCH_LPC18XX
+ bool "NXP LPC18xx/LPC43xx"
+ depends on ARM_SINGLE_ARMV7M
+ select ARCH_HAS_RESET_CONTROLLER
+ select ARM_AMBA
+ select CLKSRC_LPC32XX
+ select PINCTRL
+ help
+ Support for NXP's LPC18xx Cortex-M3 and LPC43xx Cortex-M4
+ high performance microcontrollers.
+
+config ARCH_STM32
+ bool "STMicrolectronics STM32"
+ depends on ARM_SINGLE_ARMV7M
+ select ARCH_HAS_RESET_CONTROLLER
+ select ARMV7M_SYSTICK
+ select CLKSRC_STM32
+ select RESET_CONTROLLER
+ help
+ Support for STMicroelectronics STM32 processors.
+
# Definitions to make life easier
config ARCH_ACORN
bool
config PLAT_VERSATILE
bool
-config ARM_TIMER_SP804
- bool
- select CLKSRC_MMIO
- select CLKSRC_OF if OF
-
source "arch/arm/firmware/Kconfig"
source arch/arm/mm/Kconfig
depends on GENERIC_CLOCKEVENTS
depends on HAVE_SMP
depends on MMU || ARM_MPU
+ select IRQ_WORK
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, say N. If you have a system with more
config HAVE_ARM_TWD
bool
- depends on SMP
select CLKSRC_OF if OF
help
This options enables support for the ARM timer and watchdog unit
config VMSPLIT_3G
bool "3G/1G user/kernel split"
+ config VMSPLIT_3G_OPT
+ bool "3G/1G user/kernel split (for full 1G low memory)"
config VMSPLIT_2G
bool "2G/2G user/kernel split"
config VMSPLIT_1G
default PHYS_OFFSET if !MMU
default 0x40000000 if VMSPLIT_1G
default 0x80000000 if VMSPLIT_2G
+ default 0xB0000000 if VMSPLIT_3G_OPT
default 0xC0000000
config NR_CPUS
config ARM_PSCI
bool "Support for the ARM Power State Coordination Interface (PSCI)"
depends on CPU_V7
+ select ARM_PSCI_FW
help
Say Y here if you want Linux to communicate with system firmware
implementing the PSCI specification for CPU-centric power
# selected platforms.
config ARCH_NR_GPIO
int
- default 1024 if ARCH_SHMOBILE || ARCH_TEGRA || ARCH_ZYNQ
+ default 1024 if ARCH_BRCMSTB || ARCH_SHMOBILE || ARCH_TEGRA || \
+ ARCH_ZYNQ
default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \
SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210
default 416 if ARCH_SUNXI
default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \
ARCH_S5PV210 || ARCH_EXYNOS4
default 128 if SOC_AT91RM9200
- default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY
default 0
choice
If unsure, say n.
config HIGHPTE
- bool "Allocate 2nd-level pagetables from highmem"
+ bool "Allocate 2nd-level pagetables from highmem" if EXPERT
depends on HIGHMEM
+ default y
+ help
+ The VM uses one page of physical memory for each page table.
+ For systems with a lot of processes, this can use a lot of
+ precious low memory, eventually leading to low memory being
+ consumed by page tables. Setting this option will allow
+ user-space 2nd level page tables to reside in high memory.
-config HW_PERF_EVENTS
- bool "Enable hardware performance counter support for perf events"
- depends on PERF_EVENTS
+config CPU_SW_DOMAIN_PAN
+ bool "Enable use of CPU domains to implement privileged no-access"
+ depends on MMU && !ARM_LPAE
default y
help
- Enable hardware performance counter support for perf events. If
- disabled, perf events will use software events only.
+ Increase kernel security by ensuring that normal kernel accesses
+ are unable to access userspace addresses. This can help prevent
+ use-after-free bugs becoming an exploitable privilege escalation
+ by ensuring that magic values (such as LIST_POISON) will always
+ fault when dereferenced.
+
+ CPUs with low-vector mappings use a best-efforts implementation.
+ Their lower 1MB needs to remain accessible for the vectors, but
+ the remainder of userspace will become appropriately inaccessible.
+
+config HW_PERF_EVENTS
+ def_bool y
+ depends on ARM_PMU
config SYS_SUPPORTS_HUGETLBFS
def_bool y
config ARCH_WANT_GENERAL_HUGETLB
def_bool y
+config ARM_MODULE_PLTS
+ bool "Use PLTs to allow module memory to spill over into vmalloc area"
+ depends on MODULES
+ help
+ Allocate PLTs when loading modules so that jumps and calls whose
+ targets are too far away for their relative offsets to be encoded
+ in the instructions themselves can be bounced via veneers in the
+ module's PLT. This allows modules to be allocated in the generic
+ vmalloc area after the dedicated module memory area has been
+ exhausted. The modules will use slightly more memory, but after
+ rounding up to page size, the actual memory footprint is usually
+ the same.
+
+ Say y if you are getting out of memory errors while loading modules
+
source "mm/Kconfig"
config FORCE_MAX_ZONEORDER
- int "Maximum zone order" if ARCH_SHMOBILE_LEGACY
- range 11 64 if ARCH_SHMOBILE_LEGACY
+ int "Maximum zone order"
default "12" if SOC_AM33XX
default "9" if SA1111 || ARCH_EFM32
default "11"
bool "Flattened Device Tree support"
select IRQ_DOMAIN
select OF
- select OF_EARLY_FLATTREE
- select OF_RESERVED_MEM
help
Include support for flattened device tree machine descriptions.
config KEXEC
bool "Kexec system call (EXPERIMENTAL)"
depends on (!SMP || PM_SLEEP_SMP)
+ depends on !CPU_V7M
+ select KEXEC_CORE
help
kexec is a system call that implements the ability to shutdown your
current kernel, and to start another kernel. It is like a reboot
Code Review / kvmfornfv.git / blobdiff