config ARM_PTDUMP
bool "Export kernel pagetable layout to userspace via debugfs"
depends on DEBUG_KERNEL
+ depends on MMU
select DEBUG_FS
---help---
Say Y here if you want to show the kernel pagetable layout in a
0x80020000 | 0xf0020000 | UART8
0x80024000 | 0xf0024000 | UART9
- config AT91_DEBUG_LL_DBGU0
- bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10, 9rl, 9x5, 9n12"
- select DEBUG_AT91_UART
+ config DEBUG_AT91_UART
+ bool "Kernel low-level debugging on Atmel SoCs"
depends on ARCH_AT91
- depends on SOC_AT91RM9200 || SOC_AT91SAM9
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the serial port on atmel devices.
- config AT91_DEBUG_LL_DBGU1
- bool "Kernel low-level debugging on 9263, 9g45 and sama5d3"
- select DEBUG_AT91_UART
- depends on ARCH_AT91
- depends on SOC_AT91SAM9 || SOC_SAMA5
+ SOC DEBUG_UART_PHYS DEBUG_UART_VIRT PORT
+ rm9200, 9260/9g20, 0xfffff200 0xfefff200 DBGU
+ 9261/9g10, 9rl
+ 9263, 9g45, sama5d3 0xffffee00 0xfeffee00 DBGU
+ sama5d4 0xfc00c000 0xfb00c000 USART3
+ sama5d4 0xfc069000 0xfb069000 DBGU
+ sama5d2 0xf8020000 0xf7020000 UART1
- config AT91_DEBUG_LL_DBGU2
- bool "Kernel low-level debugging on sama5d4"
- select DEBUG_AT91_UART
- depends on ARCH_AT91
- depends on SOC_SAMA5
+ Please adjust DEBUG_UART_PHYS configuration options based on
+ your needs.
config DEBUG_BCM2835
bool "Kernel low-level debugging on BCM2835 PL011 UART"
mobile SoCs in the Kona family of chips (e.g. bcm28155,
bcm11351, etc...)
- config DEBUG_BCM63XX
+ config DEBUG_BCM63XX_UART
bool "Kernel low-level debugging on BCM63XX UART"
depends on ARCH_BCM_63XX
- select DEBUG_UART_BCM63XX
config DEBUG_BERLIN_UART
bool "Marvell Berlin SoC Debug UART"
Say Y here if you want kernel low-level debugging support
on i.MX6SX.
+ config DEBUG_IMX6UL_UART
+ bool "i.MX6UL Debug UART"
+ depends on SOC_IMX6UL
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX6UL.
+
+ config DEBUG_IMX7D_UART
+ bool "i.MX7D Debug UART"
+ depends on SOC_IMX7D
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX7D.
+
config DEBUG_KEYSTONE_UART0
bool "Kernel low-level debugging on KEYSTONE2 using UART0"
depends on ARCH_KEYSTONE
Say Y here if you want kernel low-level debugging support
on KS8695.
+ config DEBUG_LPC18XX_UART0
+ bool "Kernel low-level debugging via LPC18xx/43xx UART0"
+ depends on ARCH_LPC18XX
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on NXP LPC18xx/43xx UART0.
+
config DEBUG_MESON_UARTAO
bool "Kernel low-level debugging via Meson6 UARTAO"
depends on ARCH_MESON
on SA-11x0 UART ports. The kernel will check for the first
enabled UART in a sequence 3-1-2.
- config DEBUG_SOCFPGA_UART
+ config DEBUG_SOCFPGA_UART0
+ depends on ARCH_SOCFPGA
+ bool "Use SOCFPGA UART0 for low-level debug"
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on SOCFPGA(Cyclone 5 and Arria 5) based platforms.
+
+ config DEBUG_SOCFPGA_UART1
depends on ARCH_SOCFPGA
- bool "Use SOCFPGA UART for low-level debug"
+ bool "Use SOCFPGA UART1 for low-level debug"
select DEBUG_UART_8250
help
Say Y here if you want kernel low-level debugging support
- on SOCFPGA based platforms.
+ on SOCFPGA(Arria 10) based platforms.
+
config DEBUG_SUN9I_UART0
bool "Kernel low-level debugging messages via sun9i UART0"
For more details about semihosting, please see
chapter 8 of DUI0203I_rvct_developer_guide.pdf from ARM Ltd.
+ config DEBUG_ZTE_ZX
+ bool "Use ZTE ZX UART"
+ select DEBUG_UART_PL01X
+ depends on ARCH_ZX
+ help
+ Say Y here if you are enabling ZTE ZX296702 SOC and need
+ debug uart support.
+
+ This option is preferred over the platform specific
+ options; the platform specific options are deprecated
+ and will be soon removed.
+
config DEBUG_LL_UART_8250
bool "Kernel low-level debugging via 8250 UART"
help
endchoice
-config DEBUG_AT91_UART
- bool
- depends on ARCH_AT91
-
config DEBUG_EXYNOS_UART
bool
DEBUG_IMX53_UART || \
DEBUG_IMX6Q_UART || \
DEBUG_IMX6SL_UART || \
- DEBUG_IMX6SX_UART
+ DEBUG_IMX6SX_UART || \
+ DEBUG_IMX6UL_UART || \
+ DEBUG_IMX7D_UART
default 1
depends on ARCH_MXC
help
DEBUG_IMX53_UART ||\
DEBUG_IMX6Q_UART || \
DEBUG_IMX6SL_UART || \
- DEBUG_IMX6SX_UART
+ DEBUG_IMX6SX_UART || \
+ DEBUG_IMX6UL_UART || \
+ DEBUG_IMX7D_UART
default "debug/ks8695.S" if DEBUG_KS8695_UART
default "debug/msm.S" if DEBUG_QCOM_UARTDM
default "debug/netx.S" if DEBUG_NETX_UART
default "debug/vf.S" if DEBUG_VF_UART
default "debug/vt8500.S" if DEBUG_VT8500_UART0
default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1
- default "debug/bcm63xx.S" if DEBUG_UART_BCM63XX
+ default "debug/bcm63xx.S" if DEBUG_BCM63XX_UART
default "debug/digicolor.S" if DEBUG_DIGICOLOR_UA0
default "mach/debug-macro.S"
ARCH_IOP33X || ARCH_IXP4XX || \
ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC
-# Compatibility options for BCM63xx
-config DEBUG_UART_BCM63XX
- def_bool ARCH_BCM_63XX
-
config DEBUG_UART_PHYS
hex "Physical base address of debug UART"
default 0x00100a00 if DEBUG_NETX_UART
default 0x02531000 if DEBUG_KEYSTONE_UART1
default 0x03010fe0 if ARCH_RPC
default 0x07000000 if DEBUG_SUN9I_UART0
+ default 0x09405000 if DEBUG_ZTE_ZX
default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \
DEBUG_VEXPRESS_UART0_CA9
default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
default 0x20201000 if DEBUG_BCM2835
default 0x3e000000 if DEBUG_BCM_KONA_UART
default 0x4000e400 if DEBUG_LL_UART_EFM32
+ default 0x40081000 if DEBUG_LPC18XX_UART0
default 0x40090000 if ARCH_LPC32XX
default 0x40100000 if DEBUG_PXA_UART1
default 0x42000000 if ARCH_GEMINI
default 0xfd883000 if DEBUG_ALPINE_UART0
default 0xfe800000 if ARCH_IOP32X
default 0xff690000 if DEBUG_RK32_UART2
- default 0xffc02000 if DEBUG_SOCFPGA_UART
+ default 0xffc02000 if DEBUG_SOCFPGA_UART0
+ default 0xffc02100 if DEBUG_SOCFPGA_UART1
default 0xffd82340 if ARCH_IOP13XX
default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0
default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2
default 0xfffb0000 if DEBUG_OMAP1UART1 || DEBUG_OMAP7XXUART1
default 0xfffb0800 if DEBUG_OMAP1UART2 || DEBUG_OMAP7XXUART2
default 0xfffb9800 if DEBUG_OMAP1UART3 || DEBUG_OMAP7XXUART3
- default 0xfffe8600 if DEBUG_UART_BCM63XX
+ default 0xfffe8600 if DEBUG_BCM63XX_UART
default 0xfffff700 if ARCH_IOP33X
depends on ARCH_EP93XX || \
DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
- DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
- DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
+ DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
+ DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0 || \
+ DEBUG_AT91_UART
config DEBUG_UART_VIRT
hex "Virtual base address of debug UART"
default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
default 0xfc40ab00 if DEBUG_BRCMSTB_UART
- default 0xfcfe8600 if DEBUG_UART_BCM63XX
+ default 0xfc705000 if DEBUG_ZTE_ZX
+ default 0xfcfe8600 if DEBUG_BCM63XX_UART
default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
default 0xfd000000 if ARCH_SPEAR13XX
default 0xfd012000 if ARCH_MV78XX0
default 0xfeb26000 if DEBUG_RK3X_UART1
default 0xfeb30c00 if DEBUG_KEYSTONE_UART0
default 0xfeb31000 if DEBUG_KEYSTONE_UART1
- default 0xfec02000 if DEBUG_SOCFPGA_UART
+ default 0xfec02000 if DEBUG_SOCFPGA_UART0
+ default 0xfec02100 if DEBUG_SOCFPGA_UART1
default 0xfec12000 if DEBUG_MVEBU_UART0 || DEBUG_MVEBU_UART0_ALTERNATE
default 0xfec12100 if DEBUG_MVEBU_UART1_ALTERNATE
default 0xfec10000 if DEBUG_SIRFATLAS7_UART0
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
DEBUG_NETX_UART || \
DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
- DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART || \
+ DEBUG_BCM63XX_UART || DEBUG_ASM9260_UART || \
DEBUG_SIRFSOC_UART || DEBUG_DIGICOLOR_UA0
config DEBUG_UART_8250_SHIFT
bool "Use 32-bit accesses for 8250 UART"
depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
depends on DEBUG_UART_8250_SHIFT >= 2
- default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART || \
- ARCH_KEYSTONE || DEBUG_ALPINE_UART0 || \
+ default y if DEBUG_PICOXCELL_UART || DEBUG_SOCFPGA_UART0 || \
+ DEBUG_SOCFPGA_UART1 || ARCH_KEYSTONE || \
+ DEBUG_ALPINE_UART0 || \
DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
DEBUG_DAVINCI_DA8XX_UART2 || \
DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \
config DEBUG_UNCOMPRESS
bool
- depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG
+ depends on ARCH_MULTIPLATFORM || PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
(!DEBUG_TEGRA_UART || !ZBOOT_ROM)
help
config UNCOMPRESS_INCLUDE
string
default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
- PLAT_SAMSUNG || ARCH_EFM32 || \
- ARCH_SHMOBILE_LEGACY
+ PLAT_SAMSUNG || ARM_SINGLE_ARMV7M
default "mach/uncompress.h"
config EARLY_PRINTK
config DEBUG_SET_MODULE_RONX
bool "Set loadable kernel module data as NX and text as RO"
- depends on MODULES
+ depends on MODULES && MMU
---help---
This option helps catch unintended modifications to loadable
kernel module's text and read-only data. It also prevents execution
Code Review / kvmfornfv.git / blobdiff