These changes are the raw update to linux-4.4.6-rt14. Kernel sources

[kvmfornfv.git] / kernel / Documentation / hwmon / adm1275

diff --git a/kernel/Documentation/hwmon/adm1275 b/kernel/Documentation/hwmon/adm1275
index 15b4a20..d697229 100644 (file)
--- a/kernel/Documentation/hwmon/adm1275
+++ b/kernel/Documentation/hwmon/adm1275
@@ -14,6 +14,10 @@ Supported chips:
     Prefix: 'adm1276'
     Addresses scanned: -
     Datasheet: www.analog.com/static/imported-files/data_sheets/ADM1276.pdf
+  * Analog Devices ADM1293/ADM1294
+    Prefix: 'adm1293', 'adm1294'
+    Addresses scanned: -
+    Datasheet: http://www.analog.com/media/en/technical-documentation/data-sheets/ADM1293_1294.pdf
 
 Author: Guenter Roeck <linux@roeck-us.net>
 
@@ -22,12 +26,12 @@ Description
 -----------
 
 This driver supports hardware montoring for Analog Devices ADM1075, ADM1275,
-and ADM1276 Hot-Swap Controller and Digital Power Monitor.
+ADM1276, ADM1293, and ADM1294 Hot-Swap Controller and Digital Power Monitors.
 
-ADM1075, ADM1275, and ADM1276 are hot-swap controllers that allow a circuit
-board to be removed from or inserted into a live backplane. They also feature
-current and voltage readback via an integrated 12-bit analog-to-digital
-converter (ADC), accessed using a PMBus interface.
+ADM1075, ADM1275, ADM1276, ADM1293, and ADM1294 are hot-swap controllers that
+allow a circuit board to be removed from or inserted into a live backplane.
+They also feature current and voltage readback via an integrated 12
+bit analog-to-digital converter (ADC), accessed using a PMBus interface.
 
 The driver is a client driver to the core PMBus driver. Please see
 Documentation/hwmon/pmbus for details on PMBus client drivers.
@@ -58,16 +62,16 @@ Sysfs entries
 The following attributes are supported. Limits are read-write, history reset
 attributes are write-only, all other attributes are read-only.
 
-in1_label              "vin1" or "vout1" depending on chip variant and
-                       configuration. On ADM1075, vout1 reports the voltage on
-                       the VAUX pin.
-in1_input              Measured voltage.
-in1_min                        Minimum Voltage.
-in1_max                        Maximum voltage.
-in1_min_alarm          Voltage low alarm.
-in1_max_alarm          Voltage high alarm.
-in1_highest            Historical maximum voltage.
-in1_reset_history      Write any value to reset history.
+inX_label              "vin1" or "vout1" depending on chip variant and
+                       configuration. On ADM1075, ADM1293, and ADM1294,
+                       vout1 reports the voltage on the VAUX pin.
+inX_input              Measured voltage.
+inX_min                        Minimum Voltage.
+inX_max                        Maximum voltage.
+inX_min_alarm          Voltage low alarm.
+inX_max_alarm          Voltage high alarm.
+inX_highest            Historical maximum voltage.
+inX_reset_history      Write any value to reset history.
 
 curr1_label            "iout1"
 curr1_input            Measured current.
@@ -86,7 +90,9 @@ curr1_reset_history   Write any value to reset history.
 
 power1_label           "pin1"
 power1_input           Input power.
+power1_input_lowest    Lowest observed input power. ADM1293 and ADM1294 only.
+power1_input_highest   Highest observed input power.
 power1_reset_history   Write any value to reset history.
 
-                       Power attributes are supported on ADM1075 and ADM1276
-                       only.
+                       Power attributes are supported on ADM1075, ADM1276,
+                       ADM1293, and ADM1294.