These changes are the raw update to linux-4.4.6-rt14. Kernel sources

[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / regulator / da9211.txt

diff --git a/kernel/Documentation/devicetree/bindings/regulator/da9211.txt b/kernel/Documentation/devicetree/bindings/regulator/da9211.txt
index eb61890..c620493 100644 (file)
--- a/kernel/Documentation/devicetree/bindings/regulator/da9211.txt
+++ b/kernel/Documentation/devicetree/bindings/regulator/da9211.txt
@@ -1,7 +1,7 @@
-* Dialog Semiconductor DA9211/DA9213 Voltage Regulator
+* Dialog Semiconductor DA9211/DA9213/DA9215 Voltage Regulator
 
 Required properties:
-- compatible: "dlg,da9211" or "dlg,da9213".
+- compatible: "dlg,da9211" or "dlg,da9213" or "dlg,da9215"
 - reg: I2C slave address, usually 0x68.
 - interrupts: the interrupt outputs of the controller
 - regulators: A node that houses a sub-node for each regulator within the
@@ -66,3 +66,31 @@ Example 2) DA9213
                        };
                };
        };
+
+
+Example 3) DA9215
+       pmic: da9215@68 {
+               compatible = "dlg,da9215";
+               reg = <0x68>;
+               interrupts = <3 27>;
+
+               regulators {
+                       BUCKA {
+                               regulator-name = "VBUCKA";
+                               regulator-min-microvolt = < 300000>;
+                               regulator-max-microvolt = <1570000>;
+                               regulator-min-microamp  = <4000000>;
+                               regulator-max-microamp  = <7000000>;
+                               enable-gpios = <&gpio 27 0>;
+                       };
+                       BUCKB {
+                               regulator-name = "VBUCKB";
+                               regulator-min-microvolt = < 300000>;
+                               regulator-max-microvolt = <1570000>;
+                               regulator-min-microamp  = <4000000>;
+                               regulator-max-microamp  = <7000000>;
+                               enable-gpios = <&gpio 17 0>;
+                       };
+               };
+       };
+