These changes are the raw update to linux-4.4.6-rt14. Kernel sources

[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / mtd / partition.txt

diff --git a/kernel/Documentation/devicetree/bindings/mtd/partition.txt b/kernel/Documentation/devicetree/bindings/mtd/partition.txt
index 8e5557d..1c63e40 100644 (file)
--- a/kernel/Documentation/devicetree/bindings/mtd/partition.txt
+++ b/kernel/Documentation/devicetree/bindings/mtd/partition.txt
@@ -4,10 +4,19 @@ Partitions can be represented by sub-nodes of an mtd device. This can be used
 on platforms which have strong conventions about which portions of a flash are
 used for what purposes, but which don't use an on-flash partition table such
 as RedBoot.
-NOTE: if the sub-node has a compatible string, then it is not a partition.
 
-#address-cells & #size-cells must both be present in the mtd device. There are
-two valid values for both:
+The partition table should be a subnode of the mtd node and should be named
+'partitions'. This node should have the following property:
+- compatible : (required) must be "fixed-partitions"
+Partitions are then defined in subnodes of the partitions node.
+
+For backwards compatibility partitions as direct subnodes of the mtd device are
+supported. This use is discouraged.
+NOTE: also for backwards compatibility, direct subnodes that have a compatible
+string are not considered partitions, as they may be used for other bindings.
+
+#address-cells & #size-cells must both be present in the partitions subnode of the
+mtd device. There are two valid values for both:
 <1>: for partitions that require a single 32-bit cell to represent their
      size/address (aka the value is below 4 GiB)
 <2>: for partitions that require two 32-bit cells to represent their
@@ -28,44 +37,53 @@ Examples:
 
 
 flash@0 {
-       #address-cells = <1>;
-       #size-cells = <1>;
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <1>;
 
-       partition@0 {
-               label = "u-boot";
-               reg = <0x0000000 0x100000>;
-               read-only;
-       };
+               partition@0 {
+                       label = "u-boot";
+                       reg = <0x0000000 0x100000>;
+                       read-only;
+               };
 
-       uimage@100000 {
-               reg = <0x0100000 0x200000>;
+               uimage@100000 {
+                       reg = <0x0100000 0x200000>;
+               };
        };
 };
 
 flash@1 {
-       #address-cells = <1>;
-       #size-cells = <2>;
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <1>;
+               #size-cells = <2>;
 
-       /* a 4 GiB partition */
-       partition@0 {
-               label = "filesystem";
-               reg = <0x00000000 0x1 0x00000000>;
+               /* a 4 GiB partition */
+               partition@0 {
+                       label = "filesystem";
+                       reg = <0x00000000 0x1 0x00000000>;
+               };
        };
 };
 
 flash@2 {
-       #address-cells = <2>;
-       #size-cells = <2>;
+       partitions {
+               compatible = "fixed-partitions";
+               #address-cells = <2>;
+               #size-cells = <2>;
 
-       /* an 8 GiB partition */
-       partition@0 {
-               label = "filesystem #1";
-               reg = <0x0 0x00000000 0x2 0x00000000>;
-       };
+               /* an 8 GiB partition */
+               partition@0 {
+                       label = "filesystem #1";
+                       reg = <0x0 0x00000000 0x2 0x00000000>;
+               };
 
-       /* a 4 GiB partition */
-       partition@200000000 {
-               label = "filesystem #2";
-               reg = <0x2 0x00000000 0x1 0x00000000>;
+               /* a 4 GiB partition */
+               partition@200000000 {
+                       label = "filesystem #2";
+                       reg = <0x2 0x00000000 0x1 0x00000000>;
+               };
        };
 };