These changes are the raw update to linux-4.4.6-rt14. Kernel sources

[kvmfornfv.git] / kernel / Documentation / devicetree / bindings / arm / atmel-at91.txt

diff --git a/kernel/Documentation/devicetree/bindings/arm/atmel-at91.txt b/kernel/Documentation/devicetree/bindings/arm/atmel-at91.txt
index 2e99b5b..7fd64ec 100644 (file)
--- a/kernel/Documentation/devicetree/bindings/arm/atmel-at91.txt
+++ b/kernel/Documentation/devicetree/bindings/arm/atmel-at91.txt
@@ -27,6 +27,8 @@ compatible: must be one of:
     o "atmel,at91sam9xe"
  * "atmel,sama5" for SoCs using a Cortex-A5, shall be extended with the specific
    SoC family:
+    o "atmel,sama5d2" shall be extended with the specific SoC compatible:
+       - "atmel,sama5d27"
     o "atmel,sama5d3" shall be extended with the specific SoC compatible:
        - "atmel,sama5d31"
        - "atmel,sama5d33"
@@ -50,6 +52,7 @@ System Timer (ST) required properties:
 - reg: Should contain registers location and length
 - interrupts: Should contain interrupt for the ST which is the IRQ line
   shared across all System Controller members.
+- clocks: phandle to input clock.
 Its subnodes can be:
 - watchdog: compatible should be "atmel,at91rm9200-wdt"
 
@@ -61,7 +64,7 @@ TC/TCLIB Timer required properties:
   Note that you can specify several interrupt cells if the TC
   block has one interrupt per channel.
 - clock-names: tuple listing input clock names.
-       Required elements: "t0_clk"
+       Required elements: "t0_clk", "slow_clk"
        Optional elements: "t1_clk", "t2_clk"
 - clocks: phandles to input clocks.
 
@@ -87,18 +90,20 @@ One interrupt per TC channel in a TC block:
 
 RSTC Reset Controller required properties:
 - compatible: Should be "atmel,<chip>-rstc".
-  <chip> can be "at91sam9260" or "at91sam9g45"
+  <chip> can be "at91sam9260" or "at91sam9g45" or "sama5d3"
 - reg: Should contain registers location and length
+- clocks: phandle to input clock.
 
 Example:
 
        rstc@fffffd00 {
                compatible = "atmel,at91sam9260-rstc";
                reg = <0xfffffd00 0x10>;
+               clocks = <&clk32k>;
        };
 
 RAMC SDRAM/DDR Controller required properties:
-- compatible: Should be "atmel,at91rm9200-sdramc",
+- compatible: Should be "atmel,at91rm9200-sdramc", "syscon"
                        "atmel,at91sam9260-sdramc",
                        "atmel,at91sam9g45-ddramc",
                        "atmel,sama5d3-ddramc",
@@ -117,6 +122,7 @@ required properties:
 - compatible: Should be "atmel,<chip>-shdwc".
   <chip> can be "at91sam9260", "at91sam9rl" or "at91sam9x5".
 - reg: Should contain registers location and length
+- clocks: phandle to input clock.
 
 optional properties:
 - atmel,wakeup-mode: String, operation mode of the wakeup mode.
@@ -135,9 +141,10 @@ optional at91sam9x5 properties:
 
 Example:
 
-       rstc@fffffd00 {
-               compatible = "atmel,at91sam9260-rstc";
-               reg = <0xfffffd00 0x10>;
+       shdwc@fffffd10 {
+               compatible = "atmel,at91sam9260-shdwc";
+               reg = <0xfffffd10 0x10>;
+               clocks = <&clk32k>;
        };
 
 Special Function Registers (SFR)