--- /dev/null
+#!/bin/bash
+JOB_TYPE=$1
+QEMURPM_VERSION=$2
+HOME='/home/jenkins'
+VSPERF="${HOME}/vswitchperf"
+LOG_FILE_PREFIX="/tmp/vsperf_build"
+VSPERF_BIN='./vsperf'
+DATE=$(date -u +"%Y-%m-%d_%H-%M-%S")
+VSPERFENV_DIR="$HOME/vsperfenv"
+TEST_REPORT_LOG_DIR="/tmp/packet_fwd_logs"
+EXIT=0
+EXIT_TC_FAILED=1
+
+# DAILY - run selected TCs for defined packet sizes
+TESTCASES_DAILY='phy2phy_tput phy2phy_tput_mod_vlan pvp_tput'
+TESTPARAM_DAILY='--test-params TRAFFICGEN_PKT_SIZES=(64,128,512,1024,1518)'
+TESTCASES_SRIOV='pvp_tput'
+TESTPARAM_SRIOV='--test-params TRAFFICGEN_PKT_SIZES=(64,128,512,1024,1518)'
+
+#mounting shared directory for collecting ixia test results.
+shared_dir=$(sudo mount | grep ixia_results)
+if [ -z "$shared_dir" ]; then
+ echo "mounting shared directory for results"
+ sudo mount -t cifs //10.10.100.6/ixia_results/kvm4nfv_ci /mnt/ixia_results/kvm4nfv_ci -o password=kvm4nfv! -o username=kvm4nfv,file_mode=0777,dir_mode=0777,nounix
+else
+ echo "shared directory is already mounted for results"
+fi
+
+# check if user config file exists if not then we will use default settings
+if [ -f $HOME/vsperf.conf ] ; then
+ CONF_FILE="--conf-file ${HOME}/vsperf.conf"
+ else
+ echo "configuration file not found on the test node"
+ echo "Using configuration file available in kvmfornfv repo"
+ CONF_FILE="--conf-file /root/workspace/scripts/vsperf.conf"
+fi
+
+# check if sriov config file exists if not then we will use default settings
+if [ -f $HOME/vsperf.conf.sriov ] ; then
+ CONF_FILE_SRIOV="--conf-file ${HOME}/vsperf.conf.sriov"
+ else
+ echo "SRIOV configuration file not found on the node"
+ echo "Using SRIOV configuration file available in kvmfornfv repo"
+ CONF_FILE="--conf-file /root/workspace/scripts/vsperf.conf.sriov"
+fi
+
+function install_vsperf() {
+ echo "Installing vsperf....."
+ ( cd $VSPERF/systems ; ./build_base_machine.sh )
+}
+
+#Install kvmfornfv built qemu for launching guest vm.
+function install_qemu() {
+ echo "removing existing qemu packages and installing kvmfornfv built qemu"
+ ( cd /root/workspace/scripts ; ./host-install-qemu.sh )
+}
+
+function print_results() {
+ for i in $TESTCASES ; do
+ RES_FILE=`ls -1 $1 | egrep "result_${i}_[0-9a-zA-Z\-]+.csv"`
+
+ if [ "x$RES_FILE" != "x" -a -e "${1}/${RES_FILE}" ]; then
+ if grep ^FAILED "${1}/${RES_FILE}" &> /dev/null ; then
+ printf " %-70s %-6s\n" "result_${i}" "FAILED"
+ EXIT=$EXIT_TC_FAILED
+ else
+ echo "--------------------------------------------------------------"
+ printf " %-50s %-6s\n" "result_${i}" "OK"
+ echo "--------------------------------------------------------------"
+ fi
+ else
+ echo "------------------------------------------------------------------"
+ printf " %-50s %-6s\n" "result_${i}" "FAILED"
+ echo "------------------------------------------------------------------"
+ EXIT=$EXIT_TC_FAILED
+ fi
+ done
+}
+
+function execute_vsperf() {
+ # figure out list of TCs and execution parameters
+ case $2 in
+ "daily")
+ TESTPARAM=$TESTPARAM_DAILY
+ TESTCASES=$TESTCASES_DAILY
+ ;;
+ *)
+ echo "No vsperf test cases implemented for this job type"
+ ;;
+ esac
+
+ # execute testcases
+ echo -e "\nExecution of VSPERF for $1"
+ DATE_SUFFIX=$(date -u +"%Y-%m-%d_%H-%M-%S")
+ source "$VSPERFENV_DIR"/bin/activate
+ case $1 in
+ "SRIOV")
+ # use SRIOV specific TCs and configuration
+ TESTPARAM=$TESTPARAM_SRIOV
+ TESTCASES=$TESTCASES_SRIOV
+ # figure out log file name
+ LOG_SUBDIR="SRIOV"
+ LOG_FILE="${LOG_FILE_PREFIX}_${LOG_SUBDIR}_${DATE_SUFFIX}.log"
+ echo " $VSPERF_BIN --vswitch none --vnf QemuPciPassthrough $CONF_FILE_SRIOV $TESTPARAM $TESTCASES &> $LOG_FILE"
+ $VSPERF_BIN --vswitch none --vnf QemuPciPassthrough $CONF_FILE_SRIOV $TESTPARAM $TESTCASES &> $LOG_FILE
+ ;;
+ *)
+ # figure out log file name
+ LOG_SUBDIR="OvsDpdkVhost"
+ LOG_FILE="${LOG_FILE_PREFIX}_${LOG_SUBDIR}_${DATE_SUFFIX}.log"
+ echo " $VSPERF_BIN $OPNFVPOD --vswitch OvsDpdkVhost --vnf QemuDpdkVhostUser $CONF_FILE $TESTPARAM $TESTCASES > $LOG_FILE"
+ echo "daily test cases started"
+ cd $HOME/vswitchperf
+ $VSPERF_BIN --list
+ $VSPERF_BIN --vswitch OvsDpdkVhost --vnf QemuDpdkVhostUser $CONF_FILE $TESTPARAM $TESTCASES &>> $LOG_FILE
+ ;;
+ esac
+ # evaluation of results
+ echo -e "\nResults for $1"
+ RES_DIR="/$(grep "Creating result directory" $LOG_FILE | cut -d'/' -f2-)"
+ if [[ "/" == "${RES_DIR}" ]] ; then
+ echo "FAILURE: Results are not available."
+ echo "-------------------------------------------------------------------"
+ cat $LOG_FILE
+ echo "-------------------------------------------------------------------"
+ exit $EXIT_NO_RESULTS
+ else
+ print_results "${RES_DIR}"
+ if [ $(($EXIT & $EXIT_TC_FAILED)) -gt 0 ] ; then
+ echo "-------------------------------------------------------------------"
+ cat $LOG_FILE
+ echo "-------------------------------------------------------------------"
+ fi
+ fi
+ # show detailed result figures
+ for md_file in $(grep '\.md"$' $LOG_FILE | cut -d'"' -f2); do
+ # TC resut file header
+ echo -e "\n-------------------------------------------------------------------"
+ echo -e " $md_file"
+ echo -e "-------------------------------------------------------------------\n"
+ # TC details
+ sed -n '/^- Test ID/,/Bidirectional/{/Packet size/b;p;/Bidirectional/q};/Results\/Metrics Collected/,/Statistics collected/{/^$/p;/^|/p}' $md_file
+ # TC results
+ sed -n '/Results\/Metrics Collected/,/Statistics collected/{/^$/p;/^|/p}' $md_file | grep -v "Unknown" | cat -s
+ done
+
+ # copy logs into dedicated directory
+ mkdir -p ${TEST_REPORT_LOG_DIR}/${LOG_SUBDIR}
+ [ -f "$LOG_FILE" ] && cp -a "${LOG_FILE}" "${TEST_REPORT_LOG_DIR}/${LOG_SUBDIR}" &> /dev/null
+ [ -d "$RES_DIR" ] && cp -ar "$RES_DIR" "${TEST_REPORT_LOG_DIR}/${LOG_SUBDIR}" &> /dev/null
+}
+
+#Install vsperf and set up the environment
+install_vsperf
+
+#Install kvmfornfv built qemu rpm
+install_qemu
+
+# execute job based on passed parameter
+case $1 in
+ "daily")
+ echo "================"
+ echo "VSPERF daily job"
+ echo "================"
+ execute_vsperf OVS_with_DPDK_and_vHost_User $1
+ execute_vsperf SRIOV $1
+ exit $EXIT
+ ;;
+ *)
+ echo "test cases not implemented for this job type"
+esac
+
+exit $EXIT
+
Code Review / kvmfornfv.git / blobdiff