FILE_LICENCE ( GPL2_OR_LATER ) #define PXENV_UNDI_SHUTDOWN 0x0005 #define PXENV_UNDI_GET_NIC_TYPE 0x0012 #define PXENV_UNDI_GET_IFACE_INFO 0x0013 #define PXENV_STOP_UNDI 0x0015 #define PXENV_UNLOAD_STACK 0x0070 #define PXENV_GET_CACHED_INFO 0x0071 #define PXENV_PACKET_TYPE_DHCP_ACK 0x0002 #define PXENV_FILE_CMDLINE 0x00e8 #define PXE_HACK_EB54 0x0001 .text .arch i386 .org 0 .code16 #include #define STACK_MAGIC ( 'L' + ( 'R' << 8 ) + ( 'E' << 16 ) + ( 'T' << 24 ) ) #define EB_MAGIC_1 ( 'E' + ( 't' << 8 ) + ( 'h' << 16 ) + ( 'e' << 24 ) ) #define EB_MAGIC_2 ( 'r' + ( 'b' << 8 ) + ( 'o' << 16 ) + ( 'o' << 24 ) ) /* Prefix memory layout: * * iPXE binary image * Temporary stack * Temporary copy of DHCPACK packet * Temporary copy of command line */ #define PREFIX_STACK_SIZE 2048 #define PREFIX_TEMP_DHCPACK PREFIX_STACK_SIZE #define PREFIX_TEMP_DHCPACK_SIZE ( 1260 /* sizeof ( BOOTPLAYER_t ) */ ) #define PREFIX_TEMP_CMDLINE ( PREFIX_TEMP_DHCPACK + PREFIX_TEMP_DHCPACK_SIZE ) #define PREFIX_TEMP_CMDLINE_SIZE 4096 /***************************************************************************** * Entry point: set operating context, print welcome message ***************************************************************************** */ .section ".prefix", "ax", @progbits .globl _pxe_start _pxe_start: jmp $0x7c0, $1f 1: /* Preserve registers for possible return to PXE */ pushfl pushal pushw %gs pushw %fs pushw %es pushw %ds /* Store magic word on PXE stack and remember PXE %ss:esp */ pushl $STACK_MAGIC movw %ss, %cs:pxe_ss movl %esp, %cs:pxe_esp /* Set up segments */ movw %cs, %ax movw %ax, %ds movw $0x40, %ax /* BIOS data segment access */ movw %ax, %fs /* Set up temporary stack immediately after the iPXE image */ movw %cs, %ax addw image_size_pgh, %ax movw %ax, %ss movl $PREFIX_STACK_SIZE, %esp /* Clear direction flag, for the sake of sanity */ cld /* Print welcome message */ movw $10f, %si xorw %di, %di call print_message .section ".prefix.data", "aw", @progbits 10: .asciz "PXE->EB:" .previous /* Image size (for stack placement calculation) */ .section ".prefix.data", "aw", @progbits image_size_pgh: .word 0 .previous .section ".zinfo.fixup", "a", @progbits /* Compressor fixups */ .ascii "ADDW" .long image_size_pgh .long 16 .long 0 .previous /***************************************************************************** * Find us a usable !PXE or PXENV+ entry point ***************************************************************************** */ detect_pxe: /* Plan A: !PXE pointer from the stack */ lgsl pxe_esp, %ebp /* %gs:%bp -> original stack */ lesw %gs:52(%bp), %bx call is_valid_ppxe je have_ppxe /* Plan B: PXENV+ pointer from initial ES:BX */ movw %gs:32(%bp),%bx movw %gs:8(%bp),%es call is_valid_pxenv je have_pxenv /* Plan C: PXENV+ structure via INT 1Ah */ movw $0x5650, %ax int $0x1a jc 1f cmpw $0x564e, %ax jne 1f call is_valid_pxenv je have_pxenv 1: /* Plan D: scan base memory for !PXE */ call memory_scan_ppxe je have_ppxe /* Plan E: scan base memory for PXENV+ */ call memory_scan_pxenv jne stack_not_found have_pxenv: movw %bx, pxenv_offset movw %es, pxenv_segment cmpw $0x201, %es:6(%bx) /* API version >= 2.01 */ jb 1f cmpb $0x2c, %es:8(%bx) /* ... and structure long enough */ jb 2f lesw %es:0x28(%bx), %bx /* Find !PXE from PXENV+ */ call is_valid_ppxe je have_ppxe 2: call memory_scan_ppxe /* We are *supposed* to have !PXE... */ je have_ppxe 1: lesw pxenv_segoff, %bx /* Nope, we're stuck with PXENV+ */ /* Record entry point and UNDI segments */ pushl %es:0x0a(%bx) /* Entry point */ pushw %es:0x24(%bx) /* UNDI code segment */ pushw %es:0x26(%bx) /* UNDI code size */ pushw %es:0x20(%bx) /* UNDI data segment */ pushw %es:0x22(%bx) /* UNDI data size */ /* Print "PXENV+ at
" */ movw $10f, %si jmp check_have_stack .section ".prefix.data", "aw", @progbits 10: .asciz " PXENV+ at " .previous have_ppxe: movw %bx, ppxe_offset movw %es, ppxe_segment pushl %es:0x10(%bx) /* Entry point */ pushw %es:0x30(%bx) /* UNDI code segment */ pushw %es:0x36(%bx) /* UNDI code size */ pushw %es:0x28(%bx) /* UNDI data segment */ pushw %es:0x2e(%bx) /* UNDI data size */ /* Print "!PXE at
" */ movw $10f, %si jmp check_have_stack .section ".prefix.data", "aw", @progbits 10: .asciz " !PXE at " .previous is_valid_ppxe: cmpl $0x45585021, %es:(%bx) jne 1f movzbw %es:4(%bx), %cx cmpw $0x58, %cx jae is_valid_checksum 1: ret is_valid_pxenv: cmpl $0x4e455850, %es:(%bx) jne 1b cmpw $0x2b56, %es:4(%bx) jne 1b movzbw %es:8(%bx), %cx cmpw $0x28, %cx jb 1b is_valid_checksum: pushw %ax movw %bx, %si xorw %ax, %ax 2: es lodsb addb %al, %ah loopw 2b popw %ax ret memory_scan_ppxe: movw $is_valid_ppxe, %dx jmp memory_scan_common memory_scan_pxenv: movw $is_valid_pxenv, %dx memory_scan_common: movw %fs:(0x13), %ax shlw $6, %ax decw %ax 1: incw %ax cmpw $( 0xa000 - 1 ), %ax ja 2f movw %ax, %es xorw %bx, %bx call *%dx jne 1b 2: ret /***************************************************************************** * Sanity check: we must have an entry point ***************************************************************************** */ check_have_stack: /* Save common values pushed onto the stack */ popl undi_data_segoff popl undi_code_segoff popl entry_segoff /* Print have !PXE/PXENV+ message; structure pointer in %es:%bx */ call print_message call print_segoff movb $( ',' ), %al call print_character /* Check for entry point */ movl entry_segoff, %eax testl %eax, %eax jnz 99f /* No entry point: print message and skip everything else */ stack_not_found: movw $10f, %si call print_message jmp finished .section ".prefix.data", "aw", @progbits 10: .asciz " No PXE stack found!\n" .previous 99: /***************************************************************************** * Calculate base memory usage by UNDI ***************************************************************************** */ find_undi_basemem_usage: movw undi_code_segment, %ax movw undi_code_size, %bx movw undi_data_segment, %cx movw undi_data_size, %dx cmpw %ax, %cx ja 1f xchgw %ax, %cx xchgw %bx, %dx 1: /* %ax:%bx now describes the lower region, %cx:%dx the higher */ shrw $6, %ax /* Round down to nearest kB */ movw %ax, undi_fbms_start addw $0x0f, %dx /* Round up to next segment */ shrw $4, %dx addw %dx, %cx addw $((1024 / 16) - 1), %cx /* Round up to next kB */ shrw $6, %cx movw %cx, undi_fbms_end /***************************************************************************** * Print information about detected PXE stack ***************************************************************************** */ print_structure_information: /* Print entry point */ movw $10f, %si call print_message les entry_segoff, %bx call print_segoff .section ".prefix.data", "aw", @progbits 10: .asciz " entry point at " .previous /* Print UNDI code segment */ movw $10f, %si call print_message les undi_code_segoff, %bx call print_segoff .section ".prefix.data", "aw", @progbits 10: .asciz "\n UNDI code segment " .previous /* Print UNDI data segment */ movw $10f, %si call print_message les undi_data_segoff, %bx call print_segoff .section ".prefix.data", "aw", @progbits 10: .asciz ", data segment " .previous /* Print UNDI memory usage */ movw $10f, %si call print_message movw undi_fbms_start, %ax call print_word movb $( '-' ), %al call print_character movw undi_fbms_end, %ax call print_word movw $20f, %si call print_message .section ".prefix.data", "aw", @progbits 10: .asciz " (" 20: .asciz "kB)\n" .previous /***************************************************************************** * Determine physical device ***************************************************************************** */ get_physical_device: /* Issue PXENV_UNDI_GET_NIC_TYPE */ movw $PXENV_UNDI_GET_NIC_TYPE, %bx call pxe_call jnc 1f call print_pxe_error jmp no_physical_device 1: /* Determine physical device type */ movb ( pxe_parameter_structure + 0x02 ), %al cmpb $2, %al je pci_physical_device jmp no_physical_device pci_physical_device: /* Record PCI bus:dev.fn and vendor/device IDs */ movl ( pxe_parameter_structure + 0x03 ), %eax movl %eax, pci_vendor movw ( pxe_parameter_structure + 0x0b ), %ax movw %ax, pci_busdevfn movw $10f, %si call print_message call print_pci_busdevfn jmp 99f .section ".prefix.data", "aw", @progbits 10: .asciz " UNDI device is PCI " .previous no_physical_device: /* No device found, or device type not understood */ movw $10f, %si call print_message .section ".prefix.data", "aw", @progbits 10: .asciz " Unable to determine UNDI physical device" .previous 99: /***************************************************************************** * Determine interface type ***************************************************************************** */ get_iface_type: /* Issue PXENV_UNDI_GET_IFACE_INFO */ movw $PXENV_UNDI_GET_IFACE_INFO, %bx call pxe_call jnc 1f call print_pxe_error jmp 99f 1: /* Print interface type */ movw $10f, %si call print_message leaw ( pxe_parameter_structure + 0x02 ), %si call print_message .section ".prefix.data", "aw", @progbits 10: .asciz ", type " .previous /* Check for "Etherboot" interface type */ cmpl $EB_MAGIC_1, ( pxe_parameter_structure + 0x02 ) jne 99f cmpl $EB_MAGIC_2, ( pxe_parameter_structure + 0x06 ) jne 99f movw $10f, %si call print_message .section ".prefix.data", "aw", @progbits 10: .asciz " (workaround enabled)" .previous /* Flag Etherboot workarounds as required */ orw $PXE_HACK_EB54, pxe_hacks 99: movb $0x0a, %al call print_character /***************************************************************************** * Get cached DHCP_ACK packet ***************************************************************************** */ get_dhcpack: /* Issue PXENV_GET_CACHED_INFO */ xorl %esi, %esi movw %ss, %si movw %si, ( pxe_parameter_structure + 0x08 ) movw $PREFIX_TEMP_DHCPACK, ( pxe_parameter_structure + 0x06 ) movw $PREFIX_TEMP_DHCPACK_SIZE, ( pxe_parameter_structure +0x04 ) movw $PXENV_PACKET_TYPE_DHCP_ACK, ( pxe_parameter_structure + 0x02 ) movw $PXENV_GET_CACHED_INFO, %bx call pxe_call jnc 1f call print_pxe_error jmp 99f 1: /* Store physical address of packet */ shll $4, %esi addl $PREFIX_TEMP_DHCPACK, %esi movl %esi, pxe_cached_dhcpack 99: .section ".prefix.data", "aw", @progbits pxe_cached_dhcpack: .long 0 .previous /***************************************************************************** * Check for a command line ***************************************************************************** */ get_cmdline: /* Issue PXENV_FILE_CMDLINE */ xorl %esi, %esi movw %ss, %si movw %si, ( pxe_parameter_structure + 0x06 ) movw $PREFIX_TEMP_CMDLINE, ( pxe_parameter_structure + 0x04 ) movw $PREFIX_TEMP_CMDLINE_SIZE, ( pxe_parameter_structure + 0x02 ) movw $PXENV_FILE_CMDLINE, %bx call pxe_call jc 99f /* Suppress errors; this is an iPXE extension API call */ /* Check for non-NULL command line */ movw ( pxe_parameter_structure + 0x02 ), %ax testw %ax, %ax jz 99f /* Record command line */ shll $4, %esi addl $PREFIX_TEMP_CMDLINE, %esi movl %esi, pxe_cmdline 99: .section ".prefix.data", "aw", @progbits pxe_cmdline: .long 0 .previous /***************************************************************************** * Leave NIC in a safe state ***************************************************************************** */ #ifndef PXELOADER_KEEP_PXE shutdown_nic: /* Issue PXENV_UNDI_SHUTDOWN */ movw $PXENV_UNDI_SHUTDOWN, %bx call pxe_call jnc 1f call print_pxe_error 1: unload_base_code: /* Etherboot treats PXENV_UNLOAD_STACK as PXENV_STOP_UNDI, so * we must not issue this call if the underlying stack is * Etherboot and we were not intending to issue a PXENV_STOP_UNDI. */ #ifdef PXELOADER_KEEP_UNDI testw $PXE_HACK_EB54, pxe_hacks jnz 99f #endif /* PXELOADER_KEEP_UNDI */ /* Issue PXENV_UNLOAD_STACK */ movw $PXENV_UNLOAD_STACK, %bx call pxe_call jnc 1f call print_pxe_error jmp 99f 1: /* Free base memory used by PXE base code */ movw undi_fbms_start, %ax movw %fs:(0x13), %bx call free_basemem 99: andw $~( UNDI_FL_INITIALIZED | UNDI_FL_KEEP_ALL ), flags #endif /* PXELOADER_KEEP_PXE */ /***************************************************************************** * Unload UNDI driver ***************************************************************************** */ #ifndef PXELOADER_KEEP_UNDI unload_undi: /* Issue PXENV_STOP_UNDI */ movw $PXENV_STOP_UNDI, %bx call pxe_call jnc 1f call print_pxe_error jmp 99f 1: /* Free base memory used by UNDI */ movw undi_fbms_end, %ax movw undi_fbms_start, %bx call free_basemem /* Clear UNDI_FL_STARTED */ andw $~UNDI_FL_STARTED, flags 99: #endif /* PXELOADER_KEEP_UNDI */ /***************************************************************************** * Print remaining free base memory ***************************************************************************** */ print_free_basemem: movw $10f, %si call print_message movw %fs:(0x13), %ax call print_word movw $20f, %si call print_message .section ".prefix.data", "aw", @progbits 10: .asciz " " 20: .asciz "kB free base memory after PXE unload\n" .previous /***************************************************************************** * Exit point ***************************************************************************** */ finished: jmp run_ipxe /***************************************************************************** * Subroutine: print segment:offset address * * Parameters: * %es:%bx : segment:offset address to print * %ds:di : output buffer (or %di=0 to print to console) * Returns: * %ds:di : next character in output buffer (if applicable) ***************************************************************************** */ print_segoff: /* Preserve registers */ pushw %ax /* Print ":offset" */ movw %es, %ax call print_hex_word movb $( ':' ), %al call print_character movw %bx, %ax call print_hex_word /* Restore registers and return */ popw %ax ret /***************************************************************************** * Subroutine: print decimal word * * Parameters: * %ax : word to print * %ds:di : output buffer (or %di=0 to print to console) * Returns: * %ds:di : next character in output buffer (if applicable) ***************************************************************************** */ print_word: /* Preserve registers */ pushw %ax pushw %bx pushw %cx pushw %dx /* Build up digit sequence on stack */ movw $10, %bx xorw %cx, %cx 1: xorw %dx, %dx divw %bx, %ax pushw %dx incw %cx testw %ax, %ax jnz 1b /* Print digit sequence */ 1: popw %ax call print_hex_nibble loop 1b /* Restore registers and return */ popw %dx popw %cx popw %bx popw %ax ret /***************************************************************************** * Subroutine: zero 1kB block of base memory * * Parameters: * %bx : block to zero (in kB) * Returns: * Nothing ***************************************************************************** */ zero_kb: /* Preserve registers */ pushw %ax pushw %cx pushw %di pushw %es /* Zero block */ movw %bx, %ax shlw $6, %ax movw %ax, %es movw $0x400, %cx xorw %di, %di xorw %ax, %ax rep stosb /* Restore registers and return */ popw %es popw %di popw %cx popw %ax ret /***************************************************************************** * Subroutine: free and zero base memory * * Parameters: * %ax : Desired new free base memory counter (in kB) * %bx : Expected current free base memory counter (in kB) * %fs : BIOS data segment (0x40) * Returns: * None * * The base memory from %bx kB to %ax kB is unconditionally zeroed. * It will be freed if and only if the expected current free base * memory counter (%bx) matches the actual current free base memory * counter in 0x40:0x13; if this does not match then the memory will * be leaked. ***************************************************************************** */ free_basemem: /* Zero base memory */ pushw %bx 1: cmpw %bx, %ax je 2f call zero_kb incw %bx jmp 1b 2: popw %bx /* Free base memory */ cmpw %fs:(0x13), %bx /* Update FBMS only if "old" value */ jne 1f /* is correct */ 1: movw %ax, %fs:(0x13) ret /***************************************************************************** * Subroutine: make a PXE API call. Works with either !PXE or PXENV+ API. * * Parameters: * %bx : PXE API call number * %ds:pxe_parameter_structure : Parameters for PXE API call * Returns: * %ax : PXE status code (not exit code) * CF set if %ax is non-zero ***************************************************************************** */ pxe_call: /* Preserve registers */ pushw %di pushw %es /* Set up registers for PXENV+ API. %bx already set up */ pushw %ds popw %es movw $pxe_parameter_structure, %di /* Set up stack for !PXE API */ pushw %es pushw %di pushw %bx /* Make the API call */ lcall *entry_segoff /* Reset the stack */ addw $6, %sp movw pxe_parameter_structure, %ax clc testw %ax, %ax jz 1f stc 1: /* Clear direction flag, for the sake of sanity */ cld /* Restore registers and return */ popw %es popw %di ret /***************************************************************************** * Subroutine: print PXE API call error message * * Parameters: * %ax : PXE status code * %bx : PXE API call number * Returns: * Nothing ***************************************************************************** */ print_pxe_error: pushw %si movw $10f, %si call print_message xchgw %ax, %bx call print_hex_word movw $20f, %si call print_message xchgw %ax, %bx call print_hex_word movw $30f, %si call print_message popw %si ret .section ".prefix.data", "aw", @progbits 10: .asciz " UNDI API call " 20: .asciz " failed: status code " 30: .asciz "\n" .previous /***************************************************************************** * PXE data structures ***************************************************************************** */ .section ".prefix.data" pxe_esp: .long 0 pxe_ss: .word 0 pxe_parameter_structure: .fill 64 undi_code_segoff: undi_code_size: .word 0 undi_code_segment: .word 0 undi_data_segoff: undi_data_size: .word 0 undi_data_segment: .word 0 pxe_hacks: .word 0 /* The following fields are part of a struct undi_device */ undi_device: pxenv_segoff: pxenv_offset: .word 0 pxenv_segment: .word 0 ppxe_segoff: ppxe_offset: .word 0 ppxe_segment: .word 0 entry_segoff: entry_offset: .word 0 entry_segment: .word 0 undi_fbms_start: .word 0 undi_fbms_end: .word 0 pci_busdevfn: .word UNDI_NO_PCI_BUSDEVFN isapnp_csn: .word UNDI_NO_ISAPNP_CSN isapnp_read_port: .word UNDI_NO_ISAPNP_READ_PORT pci_vendor: .word 0 pci_device: .word 0 flags: .word ( UNDI_FL_INITIALIZED | UNDI_FL_STARTED | UNDI_FL_KEEP_ALL ) .equ undi_device_size, ( . - undi_device ) /***************************************************************************** * Run iPXE main code ***************************************************************************** */ .section ".prefix" run_ipxe: /* Install iPXE */ call install /* Set up real-mode stack */ movw %bx, %ss movw $_estack16, %sp #ifdef PXELOADER_KEEP_UNDI /* Copy our undi_device structure to the preloaded_undi variable */ movw %bx, %es movw $preloaded_undi, %di movw $undi_device, %si movw $undi_device_size, %cx rep movsb #endif /* Retrieve PXE %ss:esp */ movw pxe_ss, %di movl pxe_esp, %ebp /* Retrieve PXE command line, if any */ movl pxe_cmdline, %esi /* Retrieve cached DHCPACK, if any */ movl pxe_cached_dhcpack, %ecx /* Jump to .text16 segment with %ds pointing to .data16 */ movw %bx, %ds pushw %ax pushw $1f lret .section ".text16", "ax", @progbits 1: /* Update the exit hook */ movw %cs, ( pxe_exit_hook + 2 ) /* Store command-line pointer */ movl %esi, cmdline_phys /* Store cached DHCPACK pointer */ movl %ecx, cached_dhcpack_phys /* Run main program */ pushl $main pushw %cs call prot_call popl %ecx /* discard */ /* Uninstall iPXE */ call uninstall /* Restore PXE stack */ movw %di, %ss movl %ebp, %esp /* Jump to hook if applicable */ ljmpw *pxe_exit_hook .section ".data16", "aw", @progbits .globl pxe_exit_hook pxe_exit_hook: .word exit_ipxe, 0 .previous exit_ipxe: /* Check PXE stack magic */ popl %eax cmpl $STACK_MAGIC, %eax jne 1f /* PXE stack OK: return to caller */ popw %ds popw %es popw %fs popw %gs popal popfl xorw %ax, %ax /* Return success */ lret 1: /* PXE stack corrupt or removed: use INT 18 */ int $0x18 .previous