/* * Copyright (c) 2010 Broadcom Corporation * * Permission to use, copy, modify, and/or distribute this software for any * purpose with or without fee is hereby granted, provided that the above * copyright notice and this permission notice appear in all copies. * * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ #ifndef _BRCM_TYPES_H_ #define _BRCM_TYPES_H_ #include #include #define WL_CHAN_FREQ_RANGE_2G 0 #define WL_CHAN_FREQ_RANGE_5GL 1 #define WL_CHAN_FREQ_RANGE_5GM 2 #define WL_CHAN_FREQ_RANGE_5GH 3 /* boardflags */ /* Board has gpio 9 controlling the PA */ #define BFL_PACTRL 0x00000002 /* Not ok to power down the chip pll and oscillator */ #define BFL_NOPLLDOWN 0x00000020 /* Board supports the Front End Module */ #define BFL_FEM 0x00000800 /* Board has an external LNA in 2.4GHz band */ #define BFL_EXTLNA 0x00001000 /* Board has no PA */ #define BFL_NOPA 0x00010000 /* Power topology uses BUCKBOOST */ #define BFL_BUCKBOOST 0x00200000 /* Board has FEM and switch to share antenna w/ BT */ #define BFL_FEM_BT 0x00400000 /* Power topology doesn't use CBUCK */ #define BFL_NOCBUCK 0x00800000 /* Power topology uses PALDO */ #define BFL_PALDO 0x02000000 /* Board has an external LNA in 5GHz band */ #define BFL_EXTLNA_5GHz 0x10000000 /* boardflags2 */ /* Board has an external rxbb regulator */ #define BFL2_RXBB_INT_REG_DIS 0x00000001 /* Flag to implement alternative A-band PLL settings */ #define BFL2_APLL_WAR 0x00000002 /* Board permits enabling TX Power Control */ #define BFL2_TXPWRCTRL_EN 0x00000004 /* Board supports the 2X4 diversity switch */ #define BFL2_2X4_DIV 0x00000008 /* Board supports 5G band power gain */ #define BFL2_5G_PWRGAIN 0x00000010 /* Board overrides ASPM and Clkreq settings */ #define BFL2_PCIEWAR_OVR 0x00000020 #define BFL2_LEGACY 0x00000080 /* 4321mcm93 board uses Skyworks FEM */ #define BFL2_SKWRKFEM_BRD 0x00000100 /* Board has a WAR for clock-harmonic spurs */ #define BFL2_SPUR_WAR 0x00000200 /* Flag to narrow G-band PLL loop b/w */ #define BFL2_GPLL_WAR 0x00000400 /* Tx CCK pkts on Ant 0 only */ #define BFL2_SINGLEANT_CCK 0x00001000 /* WAR to reduce and avoid clock-harmonic spurs in 2G */ #define BFL2_2G_SPUR_WAR 0x00002000 /* Flag to widen G-band PLL loop b/w */ #define BFL2_GPLL_WAR2 0x00010000 #define BFL2_IPALVLSHIFT_3P3 0x00020000 /* Use internal envelope detector for TX IQCAL */ #define BFL2_INTERNDET_TXIQCAL 0x00040000 /* Keep the buffered Xtal output from radio "ON". Most drivers will turn it * off without this flag to save power. */ #define BFL2_XTALBUFOUTEN 0x00080000 /* * board specific GPIO assignment, gpio 0-3 are also customer-configurable * led */ /* bit 9 controls the PA on new 4306 boards */ #define BOARD_GPIO_PACTRL 0x200 #define BOARD_GPIO_12 0x1000 #define BOARD_GPIO_13 0x2000 /* **** Core type/rev defaults **** */ #define D11CONF 0x0fffffb0 /* Supported D11 revs: 4, 5, 7-27 * also need to update wlc.h MAXCOREREV */ #define NCONF 0x000001ff /* Supported nphy revs: * 0 4321a0 * 1 4321a1 * 2 4321b0/b1/c0/c1 * 3 4322a0 * 4 4322a1 * 5 4716a0 * 6 43222a0, 43224a0 * 7 43226a0 * 8 5357a0, 43236a0 */ #define LCNCONF 0x00000007 /* Supported lcnphy revs: * 0 4313a0, 4336a0, 4330a0 * 1 * 2 4330a0 */ #define SSLPNCONF 0x0000000f /* Supported sslpnphy revs: * 0 4329a0/k0 * 1 4329b0/4329C0 * 2 4319a0 * 3 5356a0 */ /******************************************************************** * Phy/Core Configuration. Defines macros to to check core phy/rev * * compile-time configuration. Defines default core support. * * ****************************************************************** */ /* Basic macros to check a configuration bitmask */ #define CONF_HAS(config, val) ((config) & (1 << (val))) #define CONF_MSK(config, mask) ((config) & (mask)) #define MSK_RANGE(low, hi) ((1 << ((hi)+1)) - (1 << (low))) #define CONF_RANGE(config, low, hi) (CONF_MSK(config, MSK_RANGE(low, high))) #define CONF_IS(config, val) ((config) == (1 << (val))) #define CONF_GE(config, val) ((config) & (0-(1 << (val)))) #define CONF_GT(config, val) ((config) & (0-2*(1 << (val)))) #define CONF_LT(config, val) ((config) & ((1 << (val))-1)) #define CONF_LE(config, val) ((config) & (2*(1 << (val))-1)) /* Wrappers for some of the above, specific to config constants */ #define NCONF_HAS(val) CONF_HAS(NCONF, val) #define NCONF_MSK(mask) CONF_MSK(NCONF, mask) #define NCONF_IS(val) CONF_IS(NCONF, val) #define NCONF_GE(val) CONF_GE(NCONF, val) #define NCONF_GT(val) CONF_GT(NCONF, val) #define NCONF_LT(val) CONF_LT(NCONF, val) #define NCONF_LE(val) CONF_LE(NCONF, val) #define LCNCONF_HAS(val) CONF_HAS(LCNCONF, val) #define LCNCONF_MSK(mask) CONF_MSK(LCNCONF, mask) #define LCNCONF_IS(val) CONF_IS(LCNCONF, val) #define LCNCONF_GE(val) CONF_GE(LCNCONF, val) #define LCNCONF_GT(val) CONF_GT(LCNCONF, val) #define LCNCONF_LT(val) CONF_LT(LCNCONF, val) #define LCNCONF_LE(val) CONF_LE(LCNCONF, val) #define D11CONF_HAS(val) CONF_HAS(D11CONF, val) #define D11CONF_MSK(mask) CONF_MSK(D11CONF, mask) #define D11CONF_IS(val) CONF_IS(D11CONF, val) #define D11CONF_GE(val) CONF_GE(D11CONF, val) #define D11CONF_GT(val) CONF_GT(D11CONF, val) #define D11CONF_LT(val) CONF_LT(D11CONF, val) #define D11CONF_LE(val) CONF_LE(D11CONF, val) #define PHYCONF_HAS(val) CONF_HAS(PHYTYPE, val) #define PHYCONF_IS(val) CONF_IS(PHYTYPE, val) #define NREV_IS(var, val) \ (NCONF_HAS(val) && (NCONF_IS(val) || ((var) == (val)))) #define NREV_GE(var, val) \ (NCONF_GE(val) && (!NCONF_LT(val) || ((var) >= (val)))) #define NREV_GT(var, val) \ (NCONF_GT(val) && (!NCONF_LE(val) || ((var) > (val)))) #define NREV_LT(var, val) \ (NCONF_LT(val) && (!NCONF_GE(val) || ((var) < (val)))) #define NREV_LE(var, val) \ (NCONF_LE(val) && (!NCONF_GT(val) || ((var) <= (val)))) #define LCNREV_IS(var, val) \ (LCNCONF_HAS(val) && (LCNCONF_IS(val) || ((var) == (val)))) #define LCNREV_GE(var, val) \ (LCNCONF_GE(val) && (!LCNCONF_LT(val) || ((var) >= (val)))) #define LCNREV_GT(var, val) \ (LCNCONF_GT(val) && (!LCNCONF_LE(val) || ((var) > (val)))) #define LCNREV_LT(var, val) \ (LCNCONF_LT(val) && (!LCNCONF_GE(val) || ((var) < (val)))) #define LCNREV_LE(var, val) \ (LCNCONF_LE(val) && (!LCNCONF_GT(val) || ((var) <= (val)))) #define D11REV_IS(var, val) \ (D11CONF_HAS(val) && (D11CONF_IS(val) || ((var) == (val)))) #define D11REV_GE(var, val) \ (D11CONF_GE(val) && (!D11CONF_LT(val) || ((var) >= (val)))) #define D11REV_GT(var, val) \ (D11CONF_GT(val) && (!D11CONF_LE(val) || ((var) > (val)))) #define D11REV_LT(var, val) \ (D11CONF_LT(val) && (!D11CONF_GE(val) || ((var) < (val)))) #define D11REV_LE(var, val) \ (D11CONF_LE(val) && (!D11CONF_GT(val) || ((var) <= (val)))) #define PHYTYPE_IS(var, val)\ (PHYCONF_HAS(val) && (PHYCONF_IS(val) || ((var) == (val)))) /* Set up PHYTYPE automatically: (depends on PHY_TYPE_X, from d11.h) */ #define _PHYCONF_N (1 << PHY_TYPE_N) #define _PHYCONF_LCN (1 << PHY_TYPE_LCN) #define _PHYCONF_SSLPN (1 << PHY_TYPE_SSN) #define PHYTYPE (_PHYCONF_N | _PHYCONF_LCN | _PHYCONF_SSLPN) /* Utility macro to identify 802.11n (HT) capable PHYs */ #define PHYTYPE_11N_CAP(phytype) \ (PHYTYPE_IS(phytype, PHY_TYPE_N) || \ PHYTYPE_IS(phytype, PHY_TYPE_LCN) || \ PHYTYPE_IS(phytype, PHY_TYPE_SSN)) /* Last but not least: shorter wlc-specific var checks */ #define BRCMS_ISNPHY(band) PHYTYPE_IS((band)->phytype, PHY_TYPE_N) #define BRCMS_ISLCNPHY(band) PHYTYPE_IS((band)->phytype, PHY_TYPE_LCN) #define BRCMS_ISSSLPNPHY(band) PHYTYPE_IS((band)->phytype, PHY_TYPE_SSN) #define BRCMS_PHY_11N_CAP(band) PHYTYPE_11N_CAP((band)->phytype) /********************************************************************** * ------------- End of Core phy/rev configuration. ----------------- * * ******************************************************************** */ #define BCMMSG(dev, fmt, args...) \ do { \ if (brcm_msg_level & BRCM_DL_INFO) \ wiphy_err(dev, "%s: " fmt, __func__, ##args); \ } while (0) #ifdef CONFIG_BCM47XX /* * bcm4716 (which includes 4717 & 4718), plus 4706 on PCIe can reorder * transactions. As a fix, a read after write is performed on certain places * in the code. Older chips and the newer 5357 family don't require this fix. */ #define bcma_wflush16(c, o, v) \ ({ bcma_write16(c, o, v); (void)bcma_read16(c, o); }) #else #define bcma_wflush16(c, o, v) bcma_write16(c, o, v) #endif /* CONFIG_BCM47XX */ /* multi-bool data type: set of bools, mbool is true if any is set */ /* set one bool */ #define mboolset(mb, bit) ((mb) |= (bit)) /* clear one bool */ #define mboolclr(mb, bit) ((mb) &= ~(bit)) /* true if one bool is set */ #define mboolisset(mb, bit) (((mb) & (bit)) != 0) #define mboolmaskset(mb, mask, val) ((mb) = (((mb) & ~(mask)) | (val))) #define CEIL(x, y) (((x) + ((y)-1)) / (y)) /* forward declarations */ struct wiphy; struct ieee80211_sta; struct ieee80211_tx_queue_params; struct brcms_info; struct brcms_c_info; struct brcms_hardware; struct brcms_band; struct dma_pub; struct si_pub; struct tx_status; struct d11rxhdr; struct txpwr_limits; /* iovar structure */ struct brcmu_iovar { const char *name; /* name for lookup and display */ u16 varid; /* id for switch */ u16 flags; /* driver-specific flag bits */ u16 type; /* base type of argument */ u16 minlen; /* min length for buffer vars */ }; /* brcm_msg_level is a bit vector with defs in defs.h */ extern u32 brcm_msg_level; #endif /* _BRCM_TYPES_H_ */