+++ /dev/null
-# This file defines the deployment for the MAAS environment which is to be
-# deployed and automated.
-demo-maas:
- maas:
- # Defines the general setup for the MAAS environment, including the
- # username and password for the host as well as the MAAS server.
- user: ubuntu
- password: ubuntu
-
- # Contains the virtual machine parameters for creating the MAAS virtual
- # server. Here you can configure the name of the virsh domain, the
- # parameters for how the network is attached.
- name: opnfv-maas-intel
- interfaces: ['bridge=brAdm,model=virtio', 'bridge=brData,model=virtio', 'bridge=brPublic,model=virtio', 'bridge=brExt,model=virtio']
- memory: 4096
- vcpus: 4
- arch: amd64
- pool: default
- disk_size: 160G
- release: trusty
-
- # Apt http proxy setting(s)
- apt_http_proxy:
-
- apt_sources:
- - ppa:maas/stable
- - ppa:juju/stable
-
- boot_source:
- url: http://maas.ubuntu.com/images/ephemeral-v2/daily/
- keyring_filename: /usr/share/keyrings/ubuntu-cloudimage-keyring.gpg
- exclusive: true
- selections:
- 1:
- release: trusty
- os: ubuntu
- arches: amd64
- subarches: "*"
- labels: daily
- 2:
- release: xenial
- os: ubuntu
- arches: amd64
- subarches: "*"
- labels: daily
-
- # Virsh power settings
- # Specifies the uri and keys to use for virsh power control of the
- # juju virtual machine. If the uri is omitted, the value for the
- # --remote is used. If no power settings are desired, then do not
- # supply the virsh block.
- virsh:
- rsa_priv_key: /home/ubuntu/.ssh/id_rsa
- rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub
- uri: qemu+ssh://jenkins@10.5.1.1/system
-
- # Defines the IP Address that the configuration script will use to
- # to access the MAAS controller via SSH.
- ip_address: 10.5.1.2
-
- # This section allows the user to set a series of options on the
- # MAAS server itself. The list of config options can be found in
- # the upstream MAAS documentation:
- # - http://maas.ubuntu.com/docs/api.html#maas-server
- settings:
- main_archive: http://us.archive.ubuntu.com/ubuntu
- upstream_dns: 8.8.8.8
- maas_name: intelpod5
- # kernel_opts: "console=tty0 console=ttyS1,115200n8"
- # ntp_server: ntp.ubuntu.com
-
- # This section is used to define the networking parameters for when
- # the node first comes up. It is fed into the meta-data cloud-init
- # configuration and is used to configure the networking piece of the
- # service. The contents of this section are written directly to the
- # /etc/network/interfaces file.
- #
- # Please note, this is slightly different than the
- # node-group-interfaces section below. This will configure the
- # machine's networking params, and the node-group-interfaces will
- # configure the maas node-group interfaces which is used for
- # controlling the dhcp, dns, etc.
- network_config: |
- auto lo
- iface lo inet loopback
-
- auto eth0
- iface eth0 inet static
- address 10.5.1.2
- netmask 255.255.255.0
- network 10.5.1.0
- broadcast 10.5.1.255
- gateway 10.5.1.1
- dns-nameservers 8.8.8.8 10.5.1.2 127.0.0.1
-
- auto eth1
- iface eth1 inet static
- address 10.5.12.2
- netmask 255.255.255.0
-
- auto eth2
- iface eth2 inet static
- address 10.5.15.2
- netmask 255.255.255.0
-
- auto eth3
- iface eth3 inet static
- address 10.2.117.92
- netmask 255.255.255.0
- #auto lo
- #iface lo inet loopback
-
- #auto eth0
- #iface eth0 inet static
- # address 192.168.122.2
- # netmask 255.255.248.0
- # network 192.168.122.0
- # broadcast 192.168.122.255
- # gateway 192.168.122.1
- # dns-nameservers 192.168.122.1 127.0.0.1
-
- # The node-group-interfaces section is used to configure the MAAS
- # network interfaces. Basic configuration is supported, such as which
- # device should be bound, the range of IP addresses, etc.
- # Note: this may contain the special identifiers:
- # ${maas_net} - the first 3 octets of the ipv4 address
- # ${maas_ip} - the ip address of the MAAS controller
- node_group_ifaces:
- - device: eth0
- ip: 10.5.1.2
- subnet_mask: 255.255.255.0
- broadcast_ip: 10.5.1.255
- router_ip: 10.5.1.1
- static_range:
- low: 10.5.1.50
- high: 10.5.1.80
- dynamic_range:
- low: 10.5.1.81
- high: 10.5.1.250
- - device: eth1
- ip: 10.5.12.2
- subnet_mask: 255.255.255.0
- broadcast_ip: 10.5.12.255
- management: 1
- static_range:
- low: 10.5.12.20
- high: 10.5.12.150
- dynamic_range:
- low: 10.5.12.151
- high: 10.5.12.200
- - device: eth2
- ip: 10.5.15.2
- subnet_mask: 255.255.255.0
- broadcast_ip: 10.5.15.255
- router_ip: 10.5.15.254
- management: 1
- static_range:
- low: 10.5.15.20
- high: 10.5.15.150
- dynamic_range:
- low: 10.5.15.151
- high: 10.5.15.200
-
- # Defines the physical nodes which are added to the MAAS cluster
- # controller upon startup of the node.
- nodes:
- - name: node1-control
- tags: control
- architecture: amd64/generic
- mac_addresses:
- - "00:1e:67:cf:bb:54"
- power:
- type: ipmi
- address: 10.2.117.81
- user: root
- pass: root
- driver: LAN_2_0
-# sticky_ip_address:
-# mac_address: "38:63:bb:43:b8:9c"
-# requested_address: 192.168.122.5
-#
- - name: node2-control
- tags: control
- architecture: amd64/generic
- mac_addresses:
- - "00:1e:67:cf:b8:93"
- power:
- type: ipmi
- address: 10.2.117.82
- user: root
- pass: root
- driver: LAN_2_0
-
- - name: node3-control
- tags: control
- architecture: amd64/generic
- mac_addresses:
- - "00:1e:67:e0:08:7f"
- power:
- type: ipmi
- address: 10.2.117.83
- user: root
- pass: root
- driver: LAN_2_0
-# sticky_ip_address:
-# mac_address: "38:63:bb:43:b8:9c"
-# requested_address: 192.168.122.5
-
- - name: node4-compute
- tags: compute
- architecture: amd64/generic
- mac_addresses:
- - "00:1e:67:e0:08:b1"
- power:
- type: ipmi
- address: 10.2.117.84
- user: root
- pass: root
- driver: LAN_2_0
-# sticky_ip_address:
-# mac_address: "38:63:bb:43:b8:9c"
-# requested_address: 192.168.122.5
-
- - name: node5-compute
- tags: compute
- architecture: amd64/generic
- mac_addresses:
- - "00:1e:67:e0:0a:4b"
- power:
- type: ipmi
- address: 10.2.117.85
- user: root
- pass: root
- driver: LAN_2_0
-# sticky_ip_address:
-# mac_address: "38:63:bb:43:b8:9c"
-# requested_address: 192.168.122.5
-
-# - name: jenkins-slave
-# tags: jenkins-slave
-# architecture: amd64/generic
-# mac_addresses:
-# - "52:54:00:f0:5c:53"
-# power:
-# type: virsh
-# address: qemu+ssh://ubuntu@10.4.1.1/system
-
- # Contains the virtual machine parameters for creating the Juju bootstrap
- # node virtual machine
- juju-bootstrap:
- name: bootstrap
- interfaces: ['bridge=brAdm,model=virtio', 'bridge=brPublic,model=virtio', 'bridge=brExt,model=virtio']
- memory: 4096
- vcpus: 4
- arch: amd64
- pool: default
- disk_size: 120G
Code Review / joid.git / blobdiff