From baa86cc250a0fcf44b6f4dea7c8aeb73f4f9f0fa Mon Sep 17 00:00:00 2001
From: Tim Rozet <trozet@redhat.com>
Date: Thu, 16 Apr 2015 09:46:38 -0400
Subject: [PATCH] Adds support for subnets other than /24 and fixes issue where
 default_gw was set in the wrong place PATCHSET2: Fixes improper spacing in
 network_type for .yaml settings

Correct subnet is now detected . This was needed for Intel Pod1, but can
be used in other environments.  Vagrantfile is now updated to add
this correct netmask, and variables are updated with correct netmask as
well.  default_gw was being set before the base_config was copied, so we
were losing the value of the variable.  Moved this statement to be after
base_config.

JIRA: BGS-31

Change-Id: I36c69abf5e687fe19a92a9659b2069e1f32275a8
Signed-off-by: Tim Rozet <trozet@redhat.com>
---
 foreman/ci/deploy.sh | 42 ++++++++++++++++++++++++++++++++++--------
 1 file changed, 34 insertions(+), 8 deletions(-)

diff --git a/foreman/ci/deploy.sh b/foreman/ci/deploy.sh
index d1bb24c..82fbef7 100755
--- a/foreman/ci/deploy.sh
+++ b/foreman/ci/deploy.sh
@@ -41,6 +41,28 @@ function find_ip {
   ip addr show $1 | grep -Eo '^\s+inet\s+[\.0-9]+' | awk '{print $2}'
 }
 
+##finds subnet of ip and netmask
+##params: ip, netmask
+function find_subnet {
+  IFS=. read -r i1 i2 i3 i4 <<< "$1"
+  IFS=. read -r m1 m2 m3 m4 <<< "$2"
+  printf "%d.%d.%d.%d\n" "$((i1 & m1))" "$((i2 & m2))" "$((i3 & m3))" "$((i4 & m4))"
+}
+
+##finds netmask of interface
+##params: interface
+##returns long format 255.255.x.x
+function find_netmask {
+  ifconfig $1 | grep -Eo 'netmask\s+[\.0-9]+' | awk '{print $2}'
+}
+
+##finds short netmask of interface
+##params: interface
+##returns short format, ex: /21
+function find_short_netmask {
+  echo "/$(ip addr show $1 | grep -Eo '^\s+inet\s+[\/\.0-9]+' | awk '{print $2}' | cut -d / -f2)"
+}
+
 ##increments next IP
 ##params: ip
 ##assumes a /24 subnet
@@ -253,7 +275,12 @@ for interface in ${output}; do
     continue
   fi
   interface_ip_arr[$if_counter]=$new_ip
-  sed -i 's/^.*eth_replace'"$if_counter"'.*$/  config.vm.network "public_network", ip: '\""$new_ip"\"', bridge: '\'"$interface"\''/' Vagrantfile
+  subnet_mask=$(find_netmask $interface)
+  if [ "$if_counter" -eq 1 ]; then
+    private_subnet_mask=$subnet_mask
+    private_short_subnet_mask=$(find_short_netmask $interface)
+  fi
+  sed -i 's/^.*eth_replace'"$if_counter"'.*$/  config.vm.network "public_network", ip: '\""$new_ip"\"', bridge: '\'"$interface"\'', netmask: '\""$subnet_mask"\"'/' Vagrantfile
   ((if_counter++))
 done
 
@@ -291,8 +318,6 @@ else
   sed -i 's/^.*default_gw =.*$/  default_gw = '\""$defaultgw"\"'/' Vagrantfile
 fi
 
-sed -i 's/^.*default_gw:.*$/default_gw:'" $defaultgw"'/' opnfv_ksgen_settings.yml
-
 if [ $base_config ]; then
   if ! cp -f $base_config opnfv_ksgen_settings.yml; then
     echo "{red}ERROR: Unable to copy $base_config to opnfv_ksgen_settings.yml${reset}"
@@ -311,6 +336,8 @@ echo "${blue}Gathering network parameters for Target System...this may take a fe
 ##if single node deployment all the variables will have the same ip
 ##interface names will be enp0s3, enp0s8, enp0s9 in chef/centos7
 
+sed -i 's/^.*default_gw:.*$/default_gw:'" $defaultgw"'/' opnfv_ksgen_settings.yml
+
 ##replace private interface parameter
 ##private interface will be of hosts, so we need to know the provisioned host interface name
 ##we add biosdevname=0, net.ifnames=0 to the kickstart to use regular interface naming convention on hosts
@@ -328,7 +355,7 @@ elif [[ "$deployment_type" == "multi_network" || "$deployment_type" == "three_ne
 
   if [ "$deployment_type" == "three_network" ]; then
     sed -i 's/^.*storage_iface:.*$/  storage_iface: eth1/' opnfv_ksgen_settings.yml
-    sed -i 's/^.*network_type:.*$/  network_type: three_network/' opnfv_ksgen_settings.yml
+    sed -i 's/^.*network_type:.*$/network_type: three_network/' opnfv_ksgen_settings.yml
   else
     sed -i 's/^.*storage_iface:.*$/  storage_iface: eth3/' opnfv_ksgen_settings.yml
   fi
@@ -378,10 +405,9 @@ elif [[ "$deployment_type" == "multi_network" || "$deployment_type" == "three_ne
   done
 
   ##replace private_subnet param
-  network=.0
-  baseaddr="$(echo $next_private_ip | cut -d. -f1-3)"
-  private_subnet=$baseaddr$network
-  sed -i 's/^.*private_subnet:.*$/  private_subnet:'" $private_subnet"''"\/24"'/' opnfv_ksgen_settings.yml
+  private_subnet=$(find_subnet $next_private_ip $private_subnet_mask)
+  private_subnet=$private_subnet'\'$private_short_subnet_mask
+  sed -i 's/^.*private_subnet:.*$/  private_subnet:'" $private_subnet"'/' opnfv_ksgen_settings.yml
 else
   printf '%s\n' 'deploy.sh: Unknown network type: $deployment_type' >&2
   exit 1
-- 
2.16.6