Abstract
========
-This document describes how to install the Arno SR1 release of OPNFV when using Foreman/Quickstack as a
+This document describes how to install the Arno SR1 release of OPNFV when using Foreman/Quickstack as
+a
deployment tool covering it's limitations, dependencies and required system resources.
License
| 2015-09-10 | 0.2.0 | Tim Rozet | Update to SR1 |
| | | (Red Hat) | |
+--------------------+--------------------+--------------------+--------------------+
+| 2015-09-25 | 0.2.1 | Randy Levensalor | Added CLI |
+| | | (CableLabs) | verification |
++--------------------+--------------------+--------------------+--------------------+
+
Introduction
============
Foreman/QuickStack. These tools consist of the Foreman/QuickStack bootable ISO
(``arno.2015.2.0.foreman.iso``), and the automatic deployment script (``deploy.sh``).
-An OPNFV install requires a "Jumphost" in order to operate. The bootable ISO will allow you to install
+An OPNFV install requires a "Jumphost" in order to operate. The bootable ISO will allow you to
+install
a customized CentOS 7 release to the Jumphost, which then gives you the required packages needed to
run ``deploy.sh``. If you already have a Jumphost with CentOS 7 installed, you may choose to ignore
the ISO step and instead move directly to cloning the git repository and running ``deploy.sh``. In
5. Internet access for downloading packages, with a default gateway configured.
-6. 4 GB of RAM for a bare metal deployment, 18 GB (HA) or 8 GB (non-HA) of RAM for a VM deployment.
+6. 4 GB of RAM for a bare metal deployment, 18 GB (HA) or 8 GB (non-HA) of RAM for a VM
+deployment.
Network Requirements
--------------------
1 VLAN network used for baremetal, then all of the previously listed logical networks will be
consolidated to that single network.
-3. Lights out OOB network access from Jumphost with IPMI node enabled (bare metal deployment only).
+3. Lights out OOB network access from Jumphost with IPMI node enabled (bare metal deployment
+only).
4. Admin or public network has Internet access, meaning a gateway and DNS availability.
``deploy.sh`` brings up a CentOS 7 Vagrant VM, provided by VirtualBox. The VM then executes an
Ansible project called Khaleesi in order to install Foreman and QuickStack. Once the
Foreman/QuickStack VM is up, Foreman will be configured with the nodes' information. This includes
-MAC address, IPMI, OpenStack type (controller, compute, OpenDaylight controller) and other information.
+MAC address, IPMI, OpenStack type (controller, compute, OpenDaylight controller) and other
+information.
At this point Khaleesi makes a REST API call to Foreman to instruct it to provision the hardware.
-Foreman will then reboot the nodes via IPMI. The nodes should already be set to PXE boot first off the
+Foreman will then reboot the nodes via IPMI. The nodes should already be set to PXE boot first off
+the
admin interface. Foreman will then allow the nodes to PXE and install CentOS 7 as well as Puppet.
Foreman/QuickStack VM server runs a Puppet Master and the nodes query this master to get their
appropriate OPNFV configuration. The nodes will then reboot one more time and once back up, will DHCP
--------------------------
You now need to take the MAC address/IPMI info gathered in section
-`Execution Requirements (Bare Metal Only)`_ and create the YAML inventory (also known as configuration)
+`Execution Requirements (Bare Metal Only)`_ and create the YAML inventory (also known as
+configuration)
file for ``deploy.sh``.
1. Copy the ``opnfv_ksgen_settings.yml`` file (for HA) or ``opnfv_ksgen_settings_no_HA.yml`` from
Now that the installer has finished it is a good idea to check and make sure things are working
correctly. To access your Foreman/QuickStack VM:
-1. ``cd /var/opt/opnfv/foreman_vm/``
+1. As root: ``cd /var/opt/opnfv/foreman_vm/``
-2. ``vagrant ssh`` (password is "vagrant")
+2. ``vagrant ssh`` (no password is required)
3. You are now in the VM and can check the status of Foreman service, etc. For example:
``systemctl status foreman``
**Note: You can find out more about how to use Foreman by going to http://www.theforeman.org/ or
by watching a walkthrough video here: https://bluejeans.com/s/89gb/**
-7. Now go to your web browser and insert the Horizon public VIP. The login will be "admin"/"octopus".
+7. Now go to your web browser and insert the Horizon public VIP. The login will be
+"admin"/"octopus".
8. You are now able to follow the `OpenStack Verification`_ section.
Congratulations you have successfully installed OPNFV!
+OpenStack CLI Verification
+--------------------------
+
+This section is for users who do not have web access or prefer to use command line rather
+than a web browser to validate the OpenStack installation. Do not run this if you have
+already completed the OpenStack verification, since this uses the same names.
+
+1. Install the OpenStack CLI tools or log-in to one of the compute or control servers.
+
+2. Find the IP of keystone public VIP. As root:
+
+::
+
+ cat /var/opt/opnfv/foreman_vm/opnfv_ksgen_settings.yml | \
+ grep keystone_public_vip
+
+3. Set the environment variables. Substitute the keystone public VIP for <VIP> below.
+
+::
+
+ export OS_AUTH_URL=http://<VIP>:5000/v2.0
+ export OS_TENANT_NAME="admin"
+ export OS_USERNAME="admin"
+ export OS_PASSWORD="octopus"
+
+4. Load the CirrOS image into glance.
+
+::
+
+ glance image-create --copy-from \
+ http://download.cirros-cloud.net/0.3.4/cirros-0.3.4-x86_64-disk.img \
+ --disk-format qcow2 --container-format bare --name 'CirrOS'
+
+5. Verify the image is downloaded. The status will be "active" when the download completes.
+
+ ``glance image-show CirrOS``
+
+6. Create a private tenant network.
+
+ ``neutron net-create test_network``
+
+7. Verify the network has been created by running the command below.
+
+ ``neutron net-show test_network``
+
+8. Crate a subnet for the tenant network.
+
+ ``neutron subnet-create test_network --name test_subnet --dns-nameserver 8.8.8.8 10.0.0.0/24``
+
+9. Verify the subnet was created.
+
+ ``neutron subnet-show test_subnet``
+
+10. Add an interface from the test_subnet to the provider router.
+
+ ``neutron router-interface-add provider_router test_subnet``
+
+11. Verify the interface was added.
+
+ ``neutron router-port-list``
+
+12. Deploy a VM.
+
+ ``nova boot --flavor 1 --image CirrOS cirros1``
+
+13. Wait for the VM to complete booting. This can be completed by viewing the console log until a
+login prompt appears.
+
+ ``nova console-log cirros1``
+
+14. Get the local ip from the VM.
+
+ ``nova show cirros1 | grep test_network``
+
+15. Get the port ID for the ip from the previous command. Replace <IP> with the IP from the previous
+command. The port id is the first series of numbers and letters.
+
+ ``neutron port-list | grep 10.0.0.2 | awk ' { print $2 } '``
+
+16. Assign a floating ip to the VM. Substitue the port-id from the previous command for <PORT_ID>
+
+ ``neutron floatingip-create --port-id <PORT_ID> provider_network``
+
+17. Log into the vm. Substitute FLOATING_IP for the floating_ip_address displayed in the output in
+the above command.
+
+ ``ssh cirros@<FLOATING_IP>``
+
+18. Logout and create a second VM.
+
+ ``nova boot --flavor 1 --image CirrOS cirros2``
+
+19. Get the ip for cirros2.
+
+ ``nova show cirros2 | grep test_network``
+
+20. Redo step 17 to log back into cirros1 and ping cirros2. Replace <CIRROS2> with the ip from the
+previous step.
+
+ ``ping <CIRROS2>``
+
Installation Guide - VM Deployment
==================================
- ``/var/opt/opnfv/controller2``
- ``/var/opt/opnfv/controller3``
-Each VM will be brought up and bridged to your Jumphost NIC for the public network. ``deploy.sh`` will
+Each VM will be brought up and bridged to your Jumphost NIC for the public network. ``deploy.sh``
+will
first bring up your Foreman/QuickStack Vagrant VM and afterwards it will bring up each of the nodes
listed above, in order of controllers first.
20 IP addresses (non-HA you need only 5) that are useable on your public subnet.
``Ex: -static_ip_range 192.168.1.101,192.168.1.120``
-**Note: You may also wish to use other options like manually selecting the NIC to be used on your host,
+**Note: You may also wish to use other options like manually selecting the NIC to be used on your
+host,
etc. Please use ``deploy.sh -h`` to see a full list of options available.**
3. It will take about 20-25 minutes to install Foreman/QuickStack VM. If something goes wrong during
5. The speed at which nodes are provisioned is totally dependent on your Jumphost server specs. When
complete you will see "All VMs are UP!"
-6. The deploy will then print out the URL for your foreman server as well as the URL to access horizon.
+6. The deploy will then print out the URL for your foreman server as well as the URL to access
+horizon.
Verifying the Setup - VMs
-------------------------
Currently, OPNFV Foreman uses `OpenDaylight's Puppet module
<https://github.com/dfarrell07/puppet-opendaylight>`_, which in turn depends on `OpenDaylight's RPM
-<https://github.com/opendaylight/integration-packaging/tree/master/rpm>`_ hosted on the `CentOS Community
+<https://github.com/opendaylight/integration-packaging/tree/master/rpm>`_ hosted on the `CentOS
+Community
Build System <http://cbs.centos.org/repos/nfv7-opendaylight-2-candidate/x86_64/os/Packages/>`_.
Foreman
Revision: _sha1_
Build date: _date_
-
Code Review / genesis.git / commitdiff