green=`tput setaf 2`
declare -A interface_arr
+declare -A controllers_ip_arr
+declare -A admin_ip_arr
+declare -A public_ip_arr
+
+vagrant_box_dir=~/.vagrant.d/boxes/opnfv-VAGRANTSLASH-centos-7.0/1.0.0/virtualbox/
+vagrant_box_vmdk=box-disk1.vmdk
+vm_dir=/var/opt/opnfv
+script=`realpath $0`
##END VARS
##FUNCTIONS
echo -e "\n -no_parse : No variable parsing into config. Flag. \n"
echo -e "\n -base_config : Full path of settings file to parse. Optional. Will provide a new base settings file rather than the default. Example: -base_config /opt/myinventory.yml \n"
echo -e "\n -virtual : Node virtualization instead of baremetal. Flag. \n"
+ echo -e "\n -enable_virtual_dhcp : Run dhcp server instead of using static IPs. Use this with -virtual only. \n"
+ echo -e "\n -static_ip_range : static IP range to define when using virtual and when dhcp is not being used (default), must at least a 20 IP block. Format: '192.168.1.1,192.168.1.20' \n"
+ echo -e "\n -ping_site : site to use to verify IP connectivity from the VM when -virtual is used. Format: -ping_site www.blah.com \n"
+ echo -e "\n -floating_ip_count : number of IP address from the public range to be used for floating IP. Default is 20.\n"
+ echo -e "\n -admin_nic : Baremetal NIC for the admin network. Required if other "nic" arguments are used. \
+Not applicable with -virtual. Example: -admin_nic em1"
+ echo -e "\n -private_nic : Baremetal NIC for the private network. Required if other "nic" arguments are used. \
+Not applicable with -virtual. Example: -private_nic em2"
+ echo -e "\n -public_nic : Baremetal NIC for the public network. Required if other "nic" arguments are used. \
+Can also be used with -virtual. Example: -public_nic em3"
+ echo -e "\n -storage_nic : Baremetal NIC for the storage network. Optional. Not applicable with -virtual. \
+Private NIC will be used for storage if not specified. Example: -storage_nic em4"
+ echo -e "\n -single_baremetal_nic : Baremetal NIC for the all in one network. Optional. Not applicable with -virtual. \
+Example: -single_baremetal_nic em1"
+}
+
+##verify vm dir exists
+##params: none
+function verify_vm_dir {
+ if [ -d "$vm_dir" ]; then
+ echo -e "\n\n${red}ERROR: VM Directory: $vm_dir already exists. Environment not clean. Please use clean.sh. Exiting${reset}\n\n"
+ exit 1
+ else
+ mkdir -p $vm_dir
+ fi
+
+ chmod 700 $vm_dir
+
+ if [ ! -d $vm_dir ]; then
+ echo -e "\n\n${red}ERROR: Unable to create VM Directory: $vm_dir Exiting${reset}\n\n"
+ exit -1
+ fi
}
##find ip of interface
printf "%d.%d.%d.%d\n" "$((i1 & m1))" "$((i2 & m2))" "$((i3 & m3))" "$((i4 & m4))"
}
+##verify subnet has at least n IPs
+##params: subnet mask, n IPs
+function verify_subnet_size {
+ IFS=. read -r i1 i2 i3 i4 <<< "$1"
+ num_ips_required=$2
+
+ ##this function assumes you would never need more than 254
+ ##we check here to make sure
+ if [ "$num_ips_required" -ge 254 ]; then
+ echo -e "\n\n${red}ERROR: allocating more than 254 IPs is unsupported...Exiting${reset}\n\n"
+ return 1
+ fi
+
+ ##we just return if 3rd octet is not 255
+ ##because we know the subnet is big enough
+ if [ "$i3" -ne 255 ]; then
+ return 0
+ elif [ $((254-$i4)) -ge "$num_ips_required" ]; then
+ return 0
+ else
+ echo -e "\n\n${red}ERROR: Subnet is too small${reset}\n\n"
+ return 1
+ fi
+}
+
+##finds last usable ip (broadcast minus 1) of a subnet from an IP and netmask
+## Warning: This function only works for IPv4 at the moment.
+##params: ip, netmask
+function find_last_ip_subnet {
+ IFS=. read -r i1 i2 i3 i4 <<< "$1"
+ IFS=. read -r m1 m2 m3 m4 <<< "$2"
+ IFS=. read -r s1 s2 s3 s4 <<< "$((i1 & m1)).$((i2 & m2)).$((i3 & m3)).$((i4 & m4))"
+ printf "%d.%d.%d.%d\n" "$((255 - $m1 + $s1))" "$((255 - $m2 + $s2))" "$((255 - $m3 + $s3))" "$((255 - $m4 + $s4 - 1))"
+}
+
##increments subnet by a value
##params: ip, value
##assumes low value
echo $baseaddr.$lsv
}
+##subtracts a value from an IP address
+##params: last ip, ip_count
+##assumes ip_count is less than the last octect of the address
+subtract_ip() {
+ IFS=. read -r i1 i2 i3 i4 <<< "$1"
+ ip_count=$2
+ if [ $i4 -lt $ip_count ]; then
+ echo -e "\n\n${red}ERROR: Can't subtract $ip_count from IP address $1 Exiting${reset}\n\n"
+ exit 1
+ fi
+ printf "%d.%d.%d.%d\n" "$i1" "$i2" "$i3" "$((i4 - $ip_count ))"
+}
+
##removes the network interface config from Vagrantfile
##params: interface
##assumes you are in the directory of Vagrantfile
virtual="TRUE"
shift 1
;;
+ -enable_virtual_dhcp)
+ enable_virtual_dhcp="TRUE"
+ shift 1
+ ;;
+ -static_ip_range)
+ static_ip_range=$2
+ shift 2
+ ;;
+ -ping_site)
+ ping_site=$2
+ shift 2
+ ;;
+ -floating_ip_count)
+ floating_ip_count=$2
+ shift 2
+ ;;
+ -admin_nic)
+ admin_nic=$2
+ shift 2
+ nic_arg_flag=1
+ ;;
+ -private_nic)
+ private_nic=$2
+ shift 2
+ nic_arg_flag=1
+ ;;
+ -public_nic)
+ public_nic=$2
+ shift 2
+ nic_arg_flag=1
+ ;;
+ -storage_nic)
+ storage_nic=$2
+ shift 2
+ nic_arg_flag=1
+ ;;
+ -single_baremetal_nic)
+ single_baremetal_nic=$2
+ shift 2
+ ;;
*)
display_usage
exit 1
;;
esac
done
+
+ if [ ! -z "$enable_virtual_dhcp" ] && [ ! -z "$static_ip_range" ]; then
+ echo -e "\n\n${red}ERROR: Incorrect Usage. Static IP range cannot be set when using DHCP!. Exiting${reset}\n\n"
+ exit 1
+ fi
+
+ if [ -z "$virtual" ]; then
+ if [ ! -z "$enable_virtual_dhcp" ]; then
+ echo -e "\n\n${red}ERROR: Incorrect Usage. enable_virtual_dhcp can only be set when using -virtual!. Exiting${reset}\n\n"
+ exit 1
+ elif [ ! -z "$static_ip_range" ]; then
+ echo -e "\n\n${red}ERROR: Incorrect Usage. static_ip_range can only be set when using -virtual!. Exiting${reset}\n\n"
+ exit 1
+ fi
+ fi
+
+ if [ -z "$floating_ip_count" ]; then
+ floating_ip_count=20
+ fi
+
+ ##Validate nic args
+ if [[ $nic_arg_flag -eq 1 ]]; then
+ if [ ! -z "$single_baremetal_nic" ]; then
+ echo "${red}Please do not specify other nic types along with single_baremetal_nic!${reset}"
+ exit 1
+ fi
+
+ if [ -z "$virtual" ]; then
+ for nic_type in admin_nic private_nic public_nic; do
+ eval "nic_value=\$$nic_type"
+ if [ -z "$nic_value" ]; then
+ echo "${red}$nic_type is empty or not defined. Required when other nic args are given!${reset}"
+ exit 1
+ fi
+ interface_ip=$(find_ip $nic_value)
+ if [ ! "$interface_ip" ]; then
+ echo "${red}$nic_value does not have an IP address! Exiting... ${reset}"
+ exit 1
+ fi
+ done
+ else
+ ##if virtual only public_nic should be specified
+ for nic_type in admin_nic private_nic storage_nic single_baremetal_nic; do
+ eval "nic_value=\$$nic_type"
+ if [ ! -z "$nic_value" ]; then
+ echo "${red}$nic_type is not a valid argument using -virtual. Please only specify public_nic!${reset}"
+ exit 1
+ fi
+ done
+
+ interface_ip=$(find_ip $public_nic)
+ if [ ! "$interface_ip" ]; then
+ echo "${red}Public NIC: $public_nic does not have an IP address! Exiting... ${reset}"
+ exit 1
+ fi
+ fi
+ elif [ ! -z "$single_baremetal_nic" ]; then
+ interface_ip=$(find_ip $single_baremetal_nic)
+ if [ ! "$interface_ip" ]; then
+ echo "${red}Single Baremetal NIC: $single_baremetal_nic does not have an IP address! Exiting... ${reset}"
+ exit 1
+ fi
+ fi
}
##disable selinux
##install Ansible using yum
##params: none
-##usage: install_anible()
+##usage: install_ansible()
install_ansible() {
if ! yum list installed | grep -i ansible; then
if ! yum -y install ansible-1*; then
fi
##add centos 7 box to vagrant
- if ! vagrant box list | grep chef/centos-7.0; then
- if ! vagrant box add chef/centos-7.0 --provider virtualbox; then
+ if ! vagrant box list | grep opnfv/centos-7.0; then
+ if ! vagrant box add opnfv/centos-7.0 --provider virtualbox; then
printf '%s\n' 'deploy.sh: Unable to download centos7 box for Vagrant' >&2
exit 1
fi
##params: none
##usage: clean_tmp()
clean_tmp() {
- rm -rf /tmp/bgs_vagrant
+ rm -rf $vm_dir/foreman_vm
}
-##clone bgs vagrant version 1.0 using git
-##params: none
-##usage: clone_bgs
+##clone genesis and move to node vm dir
+##params: destination directory
+##usage: clone_bgs /tmp/myvm/
clone_bgs() {
- cd /tmp/
-
- ##will change this to be opnfv repo when commit is done
- if ! git clone -b v1.0 https://github.com/trozet/bgs_vagrant.git; then
- printf '%s\n' 'deploy.sh: Unable to clone vagrant repo' >&2
- exit 1
- fi
+ script_dir="`dirname "$script"`"
+ cp -fr $script_dir/ $1
+ cp -fr $script_dir/../../common/puppet-opnfv $1
}
-##validates the netork settings and update VagrantFile with network settings
+##validates the network settings and update VagrantFile with network settings
##params: none
##usage: configure_network()
configure_network() {
- cd /tmp/bgs_vagrant
-
- echo "${blue}Detecting network configuration...${reset}"
- ##detect host 1 or 3 interface configuration
- #output=`ip link show | grep -E "^[0-9]" | grep -Ev ": lo|tun|virbr|vboxnet" | awk '{print $2}' | sed 's/://'`
- output=`ifconfig | grep -E "^[a-zA-Z0-9]+:"| grep -Ev "lo|tun|virbr|vboxnet" | awk '{print $1}' | sed 's/://'`
+ cd $vm_dir/foreman_vm
+
+ ##if nic_arg_flag is set, then we don't figure out
+ ##NICs dynamically
+ if [[ $nic_arg_flag -eq 1 ]]; then
+ echo "${blue}Static Network Interfaces Defined. Updating Vagrantfile...${reset}"
+ if [ $virtual ]; then
+ nic_list="$public_nic"
+ elif [ -z "$storage_nic" ]; then
+ echo "${blue}storage_nic not defined, will combine storage into private VLAN ${reset}"
+ nic_list="$admin_nic $private_nic $public_nic"
+ else
+ nic_list="$admin_nic $private_nic $public_nic $storage_nic"
+ fi
+ nic_array=( $nic_list )
+ output=$nic_list
+ elif [ ! -z "$single_baremetal_nic" ]; then
+ output=$single_baremetal_nic
+ else
+ echo "${blue}Detecting network configuration...${reset}"
+ ##detect host 1 or 3 interface configuration
+ #output=`ip link show | grep -E "^[0-9]" | grep -Ev ": lo|tun|virbr|vboxnet" | awk '{print $2}' | sed 's/://'`
+ #output=`/bin/ls -l /sys/class/net | tail -n +2 | grep -v virtual | cut -d " " -f10`
+ output=`/bin/ls -l /sys/class/net | tail -n +2 | grep -v virtual | awk {'print $9'}`
+ fi
if [ ! "$output" ]; then
printf '%s\n' 'deploy.sh: Unable to detect interfaces to bridge to' >&2
exit 1
fi
- ##find number of interfaces with ip and substitute in VagrantFile
- if_counter=0
- for interface in ${output}; do
-
- if [ "$if_counter" -ge 4 ]; then
- break
+ ##virtual we only find 1 interface
+ if [ $virtual ]; then
+ if [ ! -z "${nic_array[0]}" ]; then
+ echo "${blue}Public Interface specified: ${nic_array[0]}${reset}"
+ this_default_gw_interface=${nic_array[0]}
+ else
+ ##find interface with default gateway
+ this_default_gw=$(ip route | grep default | awk '{print $3}')
+ echo "${blue}Default Gateway: $this_default_gw ${reset}"
+ this_default_gw_interface=$(ip route get $this_default_gw | awk '{print $3}')
fi
- interface_ip=$(find_ip $interface)
+
+ ##find interface IP, make sure its valid
+ interface_ip=$(find_ip $this_default_gw_interface)
if [ ! "$interface_ip" ]; then
- continue
+ echo "${red}Interface ${this_default_gw_interface} does not have an IP: $interface_ip ! Exiting ${reset}"
+ exit 1
fi
- new_ip=$(next_usable_ip $interface_ip)
- if [ ! "$new_ip" ]; then
- continue
+
+ ##set variable info
+ if [ ! -z "$static_ip_range" ]; then
+ new_ip=$(echo $static_ip_range | cut -d , -f1)
+ subnet_mask=$(find_netmask $this_default_gw_interface)
+ host_subnet=$(find_subnet $interface_ip $subnet_mask)
+ ip_range_subnet=$(find_subnet $new_ip $subnet_mask)
+ if [ "$ip_range_subnet" != "$host_subnet" ]; then
+ echo "${red}static_ip_range: ${static_ip_range} is not in the same subnet as your default gateway interface: ${host_subnet}. Please use a correct range!${reset}"
+ exit 1
+ fi
+ else
+ new_ip=$(next_usable_ip $interface_ip)
+ if [ ! "$new_ip" ]; then
+ echo "${red} Cannot find next IP on interface ${this_default_gw_interface} new_ip: $new_ip ! Exiting ${reset}"
+ exit 1
+ fi
fi
- interface_arr[$interface]=$if_counter
- interface_ip_arr[$if_counter]=$new_ip
+ interface=$this_default_gw_interface
+ public_interface=$interface
+ interface_arr[$interface]=2
+ interface_ip_arr[2]=$new_ip
subnet_mask=$(find_netmask $interface)
- if [ "$if_counter" -eq 1 ]; then
- private_subnet_mask=$subnet_mask
- private_short_subnet_mask=$(find_short_netmask $interface)
+ public_subnet_mask=$subnet_mask
+ public_short_subnet_mask=$(find_short_netmask $interface)
+
+ if ! verify_subnet_size $public_subnet_mask 25; then
+ echo "${red} Not enough IPs in public subnet: $interface_ip_arr[2] ${public_subnet_mask}. Need at least 25 IPs. Please resize subnet! Exiting ${reset}"
+ exit 1
fi
- if [ "$if_counter" -eq 2 ]; then
+
+ ##set that interface to be public
+ sed -i 's/^.*eth_replace2.*$/ config.vm.network "public_network", ip: '\""$new_ip"\"', bridge: '\'"$interface"\'', netmask: '\""$subnet_mask"\"'/' Vagrantfile
+ if_counter=1
+ else
+ if [ ! -z $single_baremetal_nic ]; then
+ interface_ip=$(find_ip $single_baremetal_nic)
+ if [ ! "$interface_ip" ]; then
+ echo "${red}Unable to determine IP address of $single_baremetal_nic. Exiting...${reset}"
+ exit 1
+ fi
+ subnet_mask=$(find_netmask $single_baremetal_nic)
public_subnet_mask=$subnet_mask
- public_short_subnet_mask=$(find_short_netmask $interface)
- fi
- if [ "$if_counter" -eq 3 ]; then
- storage_subnet_mask=$subnet_mask
+ if ! verify_subnet_size $public_subnet_mask 50; then
+ echo "${red} Not enough IPs in subnet: $interface_ip $subnet_mask. Need at least 50 IPs. Please resize subnet! Exiting ${reset}"
+ exit 1
+ fi
+
+ new_ip=$(next_usable_ip $interface_ip)
+ if [ ! "$new_ip" ]; then
+ echo "${red}Unable to allocate new IP address: $interface_ip $subnet_mask Exiting...${reset}"
+ exit 1
+ fi
+
+ this_default_gw=$(ip route | grep default | awk '{print $3}')
+ echo "${blue}Default Gateway: $this_default_gw ${reset}"
+ this_default_gw_interface=$(ip route get $this_default_gw | awk '{print $3}')
+ if [ "$this_default_gw_interface" != "$single_baremetal_nic" ]; then
+ echo "${red}Error: Your default gateway interface: $this_default_gw_interface does not \
+match the baremetal nic you provided: ${single_baremetal_nic}. Exiting...${reset}"
+ exit 1
+ fi
+ sed -i 's/^.*eth_replace0.*$/ config.vm.network "public_network", ip: '\""$new_ip"\"', bridge: '\'"$single_baremetal_nic"\'', netmask: '\""$subnet_mask"\"'/' Vagrantfile
+ interface_ip_arr[0]=$new_ip
+ interface_arr[$single_baremetal_nic]=0
+ admin_ip=$new_ip
+ admin_subnet_mask=$subnet_mask
+ public_short_subnet_mask=$(find_short_netmask $single_baremetal_nic)
+ if_counter=1
+ else
+ ##find number of interfaces with ip and substitute in VagrantFile
+ if_counter=0
+ for interface in ${output}; do
+
+ if [ "$if_counter" -ge 4 ]; then
+ break
+ fi
+ interface_ip=$(find_ip $interface)
+ if [ ! "$interface_ip" ]; then
+ continue
+ fi
+ new_ip=$(next_usable_ip $interface_ip)
+ if [ ! "$new_ip" ]; then
+ continue
+ fi
+ interface_arr[$interface]=$if_counter
+ interface_ip_arr[$if_counter]=$new_ip
+ subnet_mask=$(find_netmask $interface)
+ if [ "$if_counter" -eq 0 ]; then
+ admin_subnet_mask=$subnet_mask
+ admin_ip=$new_ip
+ if ! verify_subnet_size $admin_subnet_mask 5; then
+ echo "${red} Not enough IPs in admin subnet: ${interface_ip_arr[$if_counter]} ${admin_subnet_mask}. Need at least 5 IPs. Please resize subnet! Exiting ${reset}"
+ exit 1
+ fi
+
+ elif [ "$if_counter" -eq 1 ]; then
+ private_subnet_mask=$subnet_mask
+ private_short_subnet_mask=$(find_short_netmask $interface)
+
+ if ! verify_subnet_size $private_subnet_mask 15; then
+ echo "${red} Not enough IPs in private subnet: ${interface_ip_arr[$if_counter]} ${private_subnet_mask}. Need at least 15 IPs. Please resize subnet! Exiting ${reset}"
+ exit 1
+ fi
+ elif [ "$if_counter" -eq 2 ]; then
+ public_subnet_mask=$subnet_mask
+ public_short_subnet_mask=$(find_short_netmask $interface)
+
+ if ! verify_subnet_size $public_subnet_mask 25; then
+ echo "${red} Not enough IPs in public subnet: ${interface_ip_arr[$if_counter]} ${public_subnet_mask}. Need at least 25 IPs. Please resize subnet! Exiting ${reset}"
+ exit 1
+ fi
+ elif [ "$if_counter" -eq 3 ]; then
+ storage_subnet_mask=$subnet_mask
+
+ if ! verify_subnet_size $storage_subnet_mask 10; then
+ echo "${red} Not enough IPs in storage subnet: ${interface_ip_arr[$if_counter]} ${storage_subnet_mask}. Need at least 10 IPs. Please resize subnet! Exiting ${reset}"
+ exit 1
+ fi
+ else
+ echo "${red}ERROR: interface counter outside valid range of 0 to 3: $if_counter ! ${reset}"
+ exit 1
+ fi
+ sed -i 's/^.*eth_replace'"$if_counter"'.*$/ config.vm.network "public_network", ip: '\""$new_ip"\"', bridge: '\'"$interface"\'', netmask: '\""$subnet_mask"\"'/' Vagrantfile
+ ((if_counter++))
+ done
fi
- sed -i 's/^.*eth_replace'"$if_counter"'.*$/ config.vm.network "public_network", ip: '\""$new_ip"\"', bridge: '\'"$interface"\'', netmask: '\""$subnet_mask"\"'/' Vagrantfile
- ((if_counter++))
- done
+ fi
##now remove interface config in Vagrantfile for 1 node
##if 1, 3, or 4 interfaces set deployment type
##if 2 interfaces remove 2nd interface and set deployment type
- if [ "$if_counter" == 1 ]; then
- deployment_type="single_network"
- remove_vagrant_network eth_replace1
- remove_vagrant_network eth_replace2
- remove_vagrant_network eth_replace3
- elif [ "$if_counter" == 2 ]; then
- deployment_type="single_network"
- second_interface=`echo $output | awk '{print $2}'`
- remove_vagrant_network $second_interface
- remove_vagrant_network eth_replace2
+ if [[ "$if_counter" == 1 || "$if_counter" == 2 ]]; then
+ if [ $virtual ]; then
+ deployment_type="single_network"
+ echo "${blue}Single network detected for Virtual deployment...converting to three_network with internal networks! ${reset}"
+ private_internal_ip=155.1.2.2
+ admin_internal_ip=156.1.2.2
+ private_subnet_mask=255.255.255.0
+ private_short_subnet_mask=/24
+ interface_ip_arr[1]=$private_internal_ip
+ interface_ip_arr[0]=$admin_internal_ip
+ admin_subnet_mask=255.255.255.0
+ admin_short_subnet_mask=/24
+ sed -i 's/^.*eth_replace1.*$/ config.vm.network "private_network", virtualbox__intnet: "my_private_network", ip: '\""$private_internal_ip"\"', netmask: '\""$private_subnet_mask"\"'/' Vagrantfile
+ sed -i 's/^.*eth_replace0.*$/ config.vm.network "private_network", virtualbox__intnet: "my_admin_network", ip: '\""$admin_internal_ip"\"', netmask: '\""$private_subnet_mask"\"'/' Vagrantfile
+ remove_vagrant_network eth_replace3
+ deployment_type=three_network
+ elif [[ "$if_counter" == 1 ]]; then
+ echo "${blue}Single network detected for Baremetal deployment! ${reset}"
+ remove_vagrant_network eth_replace1
+ remove_vagrant_network eth_replace2
+ remove_vagrant_network eth_replace3
+ deployment_type="single_network"
+ else
+ echo "${blue}Single network or 2 network detected for baremetal deployment. This is unsupported! Exiting. ${reset}"
+ exit 1
+ fi
elif [ "$if_counter" == 3 ]; then
deployment_type="three_network"
remove_vagrant_network eth_replace3
echo "${blue}Network detected: ${deployment_type}! ${reset}"
+ if [ $virtual ]; then
+ if [ -z "$enable_virtual_dhcp" ]; then
+ sed -i 's/^.*disable_dhcp_flag =.*$/ disable_dhcp_flag = true/' Vagrantfile
+ if [ $static_ip_range ]; then
+ ##verify static range is at least 20 IPs
+ static_ip_range_begin=$(echo $static_ip_range | cut -d , -f1)
+ static_ip_range_end=$(echo $static_ip_range | cut -d , -f2)
+ ##verify range is at least 20 ips
+ ##assumes less than 255 range pool
+ begin_octet=$(echo $static_ip_range_begin | cut -d . -f4)
+ end_octet=$(echo $static_ip_range_end | cut -d . -f4)
+ ip_count=$((end_octet-begin_octet+1))
+ if [ "$ip_count" -lt 20 ]; then
+ echo "${red}Static range is less than 20 ips: ${ip_count}, exiting ${reset}"
+ exit 1
+ else
+ echo "${blue}Static IP range is size $ip_count ${reset}"
+ fi
+ fi
+ fi
+ fi
+
if route | grep default; then
echo "${blue}Default Gateway Detected ${reset}"
host_default_gw=$(ip route | grep default | awk '{print $3}')
sed -i 's/^.*nat_flag =.*$/ nat_flag = true/' Vagrantfile
echo "${blue}Setting node gateway to be VM Admin IP${reset}"
node_default_gw=${interface_ip_arr[0]}
- public_gateway=$default_gw
+ public_gateway=$host_default_gw
;;
3)
echo "${red}Default Gateway Detected on Storage Interface!${reset}"
fi
fi
+ nodes=`sed -nr '/nodes:/{:start /workaround/!{N;b start};//p}' opnfv_ksgen_settings.yml | sed -n '/^ [A-Za-z0-9]\+:$/p' | sed 's/\s*//g' | sed 's/://g'`
+ controller_nodes=`echo $nodes | tr " " "\n" | grep controller | tr "\n" " "`
+ echo "${blue}Controller nodes found in settings: ${controller_nodes}${reset}"
+ my_controller_array=( $controller_nodes )
+ num_control_nodes=${#my_controller_array[@]}
+ if [ "$num_control_nodes" -ne 3 ]; then
+ if cat opnfv_ksgen_settings.yml | grep ha_flag | grep true; then
+ echo "${red}Error: You must define exactly 3 control nodes when HA flag is true!${reset}"
+ exit 1
+ fi
+ else
+ echo "${blue}Number of Controller nodes detected: ${num_control_nodes}${reset}"
+ fi
+
if [ $no_parse ]; then
echo "${blue}Skipping parsing variables into settings file as no_parse flag is set${reset}"
##private interface will be of hosts, so we need to know the provisioned host interface name
##we add biosdevname=0, net.ifnames=0 to the kickstart to use regular interface naming convention on hosts
##replace IP for parameters with next IP that will be given to controller
- if [ "$deployment_type" == "single_network" ]; then
- ##we also need to assign IP addresses to nodes
- ##for single node, foreman is managing the single network, so we can't reserve them
- ##not supporting single network anymore for now
- echo "{blue}Single Network type is unsupported right now. Please check your interface configuration. Exiting. ${reset}"
- exit 0
- elif [[ "$deployment_type" == "multi_network" || "$deployment_type" == "three_network" ]]; then
+ if [[ "$deployment_type" == "single_network" || "$deployment_type" == "multi_network" || "$deployment_type" == "three_network" ]]; then
if [ "$deployment_type" == "three_network" ]; then
sed -i 's/^.*network_type:.*$/network_type: three_network/' opnfv_ksgen_settings.yml
+ elif [ "$deployment_type" == "single_network" ]; then
+ sed -i 's/^.*network_type:.*$/network_type: single_network/' opnfv_ksgen_settings.yml
+ next_single_ip=${interface_ip_arr[0]}
+ foreman_ip=$next_single_ip
+ next_single_ip=$(next_usable_ip $next_single_ip)
fi
sed -i 's/^.*deployment_type:.*$/ deployment_type: '"$deployment_type"'/' opnfv_ksgen_settings.yml
##get ip addresses for private network on controllers to make dhcp entries
##required for controllers_ip_array global param
- next_private_ip=${interface_ip_arr[1]}
- type=_private
- for node in controller1 controller2 controller3; do
- next_private_ip=$(next_usable_ip $next_private_ip)
- if [ ! "$next_private_ip" ]; then
- printf '%s\n' 'deploy.sh: Unable to find next ip for private network for control nodes' >&2
- exit 1
- fi
- sed -i 's/'"$node$type"'/'"$next_private_ip"'/g' opnfv_ksgen_settings.yml
- controller_ip_array=$controller_ip_array$next_private_ip,
- done
+ if [ "$deployment_type" == "single_network" ]; then
+ next_private_ip=$next_single_ip
+ sed -i 's/^.*no_dhcp:.*$/no_dhcp: true/' opnfv_ksgen_settings.yml
+ nodes=`sed -nr '/nodes:/{:start /workaround/!{N;b start};//p}' opnfv_ksgen_settings.yml | sed -n '/^ [A-Za-z0-9]\+:$/p' | sed 's/\s*//g' | sed 's/://g'`
+ compute_nodes=`echo $nodes | tr " " "\n" | grep -v controller | tr "\n" " "`
+ controller_nodes=`echo $nodes | tr " " "\n" | grep controller | tr "\n" " "`
+ nodes=${controller_nodes}${compute_nodes}
+ next_admin_ip=${interface_ip_arr[0]}
+ type1=_admin
+ type2=_private
+ control_count=0
+ for node in ${controller_nodes}; do
+ next_private_ip=$(next_usable_ip $next_private_ip)
+ if [ ! "$next_private_ip" ]; then
+ echo "${red} Unable to find an unused IP for $node ! ${reset}"
+ exit 1
+ else
+ sed -i 's/'"$node$type1"'/'"$next_private_ip"'/g' opnfv_ksgen_settings.yml
+ sed -i 's/'"$node$type2"'/'"$next_private_ip"'/g' opnfv_ksgen_settings.yml
+ controller_ip_array=$controller_ip_array$next_private_ip,
+ controllers_ip_arr[$control_count]=$next_private_ip
+ ((control_count++))
+ fi
+ done
+
+ for node in ${compute_nodes}; do
+ next_private_ip=$(next_usable_ip $next_private_ip)
+ if [ ! "$next_private_ip" ]; then
+ echo "${red} Unable to find an unused IP for $node ! ${reset}"
+ exit 1
+ else
+ sed -i 's/'"$node$type1"'/'"$next_private_ip"'/g' opnfv_ksgen_settings.yml
+ fi
+ done
+
+ else
+ next_private_ip=${interface_ip_arr[1]}
+
+ type=_private
+ control_count=0
+ for node in controller1 controller2 controller3; do
+ next_private_ip=$(next_usable_ip $next_private_ip)
+ if [ ! "$next_private_ip" ]; then
+ printf '%s\n' 'deploy.sh: Unable to find next ip for private network for control nodes' >&2
+ exit 1
+ fi
+ sed -i 's/'"$node$type"'/'"$next_private_ip"'/g' opnfv_ksgen_settings.yml
+ controller_ip_array=$controller_ip_array$next_private_ip,
+ controllers_ip_arr[$control_count]=$next_private_ip
+ ((control_count++))
+ done
+ fi
+
+ if [[ "$deployment_type" != "single_network" ]]; then
+ next_public_ip=${interface_ip_arr[2]}
+ foreman_ip=$next_public_ip
+ fi
+
+ ##if no dhcp, find all the Admin IPs for nodes in advance
+ if [ $virtual ]; then
+ if [ -z "$enable_virtual_dhcp" ]; then
+ sed -i 's/^.*no_dhcp:.*$/no_dhcp: true/' opnfv_ksgen_settings.yml
+ nodes=`sed -nr '/nodes:/{:start /workaround/!{N;b start};//p}' opnfv_ksgen_settings.yml | sed -n '/^ [A-Za-z0-9]\+:$/p' | sed 's/\s*//g' | sed 's/://g'`
+ compute_nodes=`echo $nodes | tr " " "\n" | grep -v controller | tr "\n" " "`
+ controller_nodes=`echo $nodes | tr " " "\n" | grep controller | tr "\n" " "`
+ nodes=${controller_nodes}${compute_nodes}
+ next_admin_ip=${interface_ip_arr[0]}
+ type=_admin
+ for node in ${nodes}; do
+ next_admin_ip=$(next_ip $next_admin_ip)
+ if [ ! "$next_admin_ip" ]; then
+ echo "${red} Unable to find an unused IP in admin_network for $node ! ${reset}"
+ exit 1
+ else
+ admin_ip_arr[$node]=$next_admin_ip
+ sed -i 's/'"$node$type"'/'"$next_admin_ip"'/g' opnfv_ksgen_settings.yml
+ fi
+ done
- ##replace global param for contollers_ip_array
+ ##allocate node public IPs
+ for node in ${nodes}; do
+ next_public_ip=$(next_usable_ip $next_public_ip)
+ if [ ! "$next_public_ip" ]; then
+ echo "${red} Unable to find an unused IP in admin_network for $node ! ${reset}"
+ exit 1
+ else
+ public_ip_arr[$node]=$next_public_ip
+ fi
+ done
+ fi
+ fi
+ ##replace global param for controllers_ip_array
controller_ip_array=${controller_ip_array%?}
sed -i 's/^.*controllers_ip_array:.*$/ controllers_ip_array: '"$controller_ip_array"'/' opnfv_ksgen_settings.yml
##therefore we increment the ip by 10 to make sure we have a safe buffer
next_private_ip=$(increment_ip $next_private_ip 10)
- grep -E '*private_vip|loadbalancer_vip|db_vip|amqp_vip|*admin_vip' opnfv_ksgen_settings.yml | while read -r line ; do
- sed -i 's/^.*'"$line"'.*$/ '"$line $next_private_ip"'/' opnfv_ksgen_settings.yml
- next_private_ip=$(next_usable_ip $next_private_ip)
- if [ ! "$next_private_ip" ]; then
- printf '%s\n' 'deploy.sh: Unable to find next ip for private network for vip replacement' >&2
- exit 1
+ private_output=$(grep -E '*private_vip|loadbalancer_vip|db_vip|amqp_vip|*admin_vip' opnfv_ksgen_settings.yml)
+ if [ ! -z "$private_output" ]; then
+ while read -r line; do
+ sed -i 's/^.*'"$line"'.*$/ '"$line $next_private_ip"'/' opnfv_ksgen_settings.yml
+ next_private_ip=$(next_usable_ip $next_private_ip)
+ if [ ! "$next_private_ip" ]; then
+ printf '%s\n' 'deploy.sh: Unable to find next ip for private network for vip replacement' >&2
+ exit 1
fi
- done
+ done <<< "$private_output"
+ fi
+
+ ##replace odl_control_ip (non-HA only)
+ odl_control_ip=${controllers_ip_arr[0]}
+ sed -i 's/^.*odl_control_ip:.*$/ odl_control_ip: '"$odl_control_ip"'/' opnfv_ksgen_settings.yml
+
+ ##replace controller_ip (non-HA only)
+ sed -i 's/^.*controller_ip:.*$/ controller_ip: '"$odl_control_ip"'/' opnfv_ksgen_settings.yml
##replace foreman site
- next_public_ip=${interface_ip_arr[2]}
- sed -i 's/^.*foreman_url:.*$/ foreman_url:'" https:\/\/$next_public_ip"'\/api\/v2\//' opnfv_ksgen_settings.yml
+ sed -i 's/^.*foreman_url:.*$/ foreman_url:'" https:\/\/$foreman_ip"'\/api\/v2\//' opnfv_ksgen_settings.yml
##replace public vips
- next_public_ip=$(increment_ip $next_public_ip 10)
- grep -E '*public_vip' opnfv_ksgen_settings.yml | while read -r line ; do
- sed -i 's/^.*'"$line"'.*$/ '"$line $next_public_ip"'/' opnfv_ksgen_settings.yml
- next_public_ip=$(next_usable_ip $next_public_ip)
- if [ ! "$next_public_ip" ]; then
- printf '%s\n' 'deploy.sh: Unable to find next ip for public network for vip replcement' >&2
- exit 1
+
+ ##if single_network deployment we continue next_public_ip from next_private_ip
+ if [[ "$deployment_type" == "single_network" ]]; then
+ next_public_ip=$(next_usable_ip $next_private_ip)
+ else
+ ##no need to do this if no dhcp
+ if [[ -z "$enable_virtual_dhcp" && ! -z "$virtual" ]]; then
+ next_public_ip=$(next_usable_ip $next_public_ip)
+ else
+ next_public_ip=$(increment_ip $next_public_ip 10)
fi
- done
+ fi
+
+ public_output=$(grep -E '*public_vip' opnfv_ksgen_settings.yml)
+ if [ ! -z "$public_output" ]; then
+ while read -r line; do
+ if echo $line | grep horizon_public_vip; then
+ horizon_public_vip=$next_public_ip
+ fi
+ sed -i 's/^.*'"$line"'.*$/ '"$line $next_public_ip"'/' opnfv_ksgen_settings.yml
+ next_public_ip=$(next_usable_ip $next_public_ip)
+ if [ ! "$next_public_ip" ]; then
+ printf '%s\n' 'deploy.sh: Unable to find next ip for public network for vip replcement' >&2
+ exit 1
+ fi
+ done <<< "$public_output"
+ fi
+ ##replace admin_network param for bare metal deployments
+ if [[ -z "$virtual" && -z "$single_network" ]]; then
+ admin_subnet=$(find_subnet $admin_ip $admin_subnet_mask)
+ sed -i 's/^.*admin_network:.*$/ admin_network:'" $admin_subnet"'/' opnfv_ksgen_settings.yml
+ else
+ sed -i 's/^.*admin_network:.*$/ admin_network:'" \"false\""'/' opnfv_ksgen_settings.yml
+ fi
##replace public_network param
public_subnet=$(find_subnet $next_public_ip $public_subnet_mask)
sed -i 's/^.*public_network:.*$/ public_network:'" $public_subnet"'/' opnfv_ksgen_settings.yml
- ##replace private_network param
- private_subnet=$(find_subnet $next_private_ip $private_subnet_mask)
- sed -i 's/^.*private_network:.*$/ private_network:'" $private_subnet"'/' opnfv_ksgen_settings.yml
+ if [ "$deployment_type" == "single_network" ]; then
+ sed -i 's/^.*private_network:.*$/ private_network:'" $public_subnet"'/' opnfv_ksgen_settings.yml
+ else
+ ##replace private_network param
+ private_subnet=$(find_subnet $next_private_ip $private_subnet_mask)
+ sed -i 's/^.*private_network:.*$/ private_network:'" $private_subnet"'/' opnfv_ksgen_settings.yml
+ fi
+
##replace storage_network
- if [ "$deployment_type" == "three_network" ]; then
+ if [ "$deployment_type" == "single_network" ]; then
+ sed -i 's/^.*storage_network:.*$/ storage_network:'" $public_subnet"'/' opnfv_ksgen_settings.yml
+ elif [ "$deployment_type" == "three_network" ]; then
sed -i 's/^.*storage_network:.*$/ storage_network:'" $private_subnet"'/' opnfv_ksgen_settings.yml
else
next_storage_ip=${interface_ip_arr[3]}
##replace public_subnet param
public_subnet=$public_subnet'\'$public_short_subnet_mask
sed -i 's/^.*public_subnet:.*$/ public_subnet:'" $public_subnet"'/' opnfv_ksgen_settings.yml
- ##replace private_subnet param
- private_subnet=$private_subnet'\'$private_short_subnet_mask
- sed -i 's/^.*private_subnet:.*$/ private_subnet:'" $private_subnet"'/' opnfv_ksgen_settings.yml
+ if [ "$deployment_type" == "single_network" ]; then
+ sed -i 's/^.*private_subnet:.*$/ private_subnet:'" $public_subnet"'/' opnfv_ksgen_settings.yml
+ else
+ ##replace private_subnet param
+ private_subnet=$private_subnet'\'$private_short_subnet_mask
+ sed -i 's/^.*private_subnet:.*$/ private_subnet:'" $private_subnet"'/' opnfv_ksgen_settings.yml
+ fi
##replace public_dns param to be foreman server
- sed -i 's/^.*public_dns:.*$/ public_dns: '${interface_ip_arr[2]}'/' opnfv_ksgen_settings.yml
+ if [ "$deployment_type" == "single_network" ]; then
+ sed -i 's/^.*public_dns:.*$/ public_dns: '${interface_ip_arr[0]}'/' opnfv_ksgen_settings.yml
+ else
+ sed -i 's/^.*public_dns:.*$/ public_dns: '${interface_ip_arr[2]}'/' opnfv_ksgen_settings.yml
+ fi
##replace public_gateway
if [ -z "$public_gateway" ]; then
- ##if unset then we assume its the first IP in the public subnet
- public_subnet=$(find_subnet $next_public_ip $public_subnet_mask)
- public_gateway=$(increment_subnet $public_subnet 1)
+ if [ "$deployment_type" == "single_network" ]; then
+ public_gateway=$node_default_gw
+ else
+ ##if unset then we assume its the first IP in the public subnet
+ public_subnet=$(find_subnet $next_public_ip $public_subnet_mask)
+ public_gateway=$(increment_subnet $public_subnet 1)
+ fi
fi
sed -i 's/^.*public_gateway:.*$/ public_gateway:'" $public_gateway"'/' opnfv_ksgen_settings.yml
##we have to define an allocation range of the public subnet to give
##to neutron to use as floating IPs
- ##we should control this subnet, so this range should work .150-200
- ##but generally this is a bad idea and we are assuming at least a /24 subnet here
+ ##if static ip range, then we take the difference of the end range and current ip
+ ## to be the allocation pool
+ ##if not static ip, we will use the last 20 IP from the subnet
+ ## note that this is not a really good idea because the subnet must be at least a /27 for this to work...
public_subnet=$(find_subnet $next_public_ip $public_subnet_mask)
- public_allocation_start=$(increment_subnet $public_subnet 150)
- public_allocation_end=$(increment_subnet $public_subnet 200)
+ if [ ! -z "$static_ip_range" ]; then
+ begin_octet=$(echo $next_public_ip | cut -d . -f4)
+ end_octet=$(echo $static_ip_range_end | cut -d . -f4)
+ ip_diff=$((end_octet-begin_octet))
+ if [ $ip_diff -le 0 ]; then
+ echo "${red}ip range left for floating range is less than or equal to 0! $ipdiff ${reset}"
+ exit 1
+ else
+ public_allocation_start=$(next_ip $next_public_ip)
+ public_allocation_end=$static_ip_range_end
+ fi
+ else
+ last_ip_subnet=$(find_last_ip_subnet $next_public_ip $public_subnet_mask)
+ public_allocation_start=$(subtract_ip $last_ip_subnet $floating_ip_count )
+ public_allocation_end=${last_ip_subnet}
+ fi
+ echo "${blue}Neutron Floating IP range: $public_allocation_start to $public_allocation_end ${reset}"
sed -i 's/^.*public_allocation_start:.*$/ public_allocation_start:'" $public_allocation_start"'/' opnfv_ksgen_settings.yml
sed -i 's/^.*public_allocation_end:.*$/ public_allocation_end:'" $public_allocation_end"'/' opnfv_ksgen_settings.yml
fi
}
-##Starts for forement VM with Vagrant
+##Starts Foreman VM with Vagrant
##params: none
##usage: start_vagrant()
start_foreman() {
##stand up vagrant
if ! vagrant up; then
- printf '%s\n' 'deploy.sh: Unable to start vagrant' >&2
+ printf '%s\n' 'deploy.sh: Unable to complete Foreman VM install' >&2
exit 1
else
echo "${blue}Foreman VM is up! ${reset}"
fi
}
-##start the VM if this is a virtual installaion
+##start the VM if this is a virtual installation
##this function does nothing if baremetal servers are being used
##params: none
##usage: start_virtual_nodes()
-start_virutal_nodes() {
+start_virtual_nodes() {
if [ $virtual ]; then
##Bring up VM nodes
compute_nodes=`echo $nodes | tr " " "\n" | grep -v controller | tr "\n" " "`
controller_nodes=`echo $nodes | tr " " "\n" | grep controller | tr "\n" " "`
nodes=${controller_nodes}${compute_nodes}
+ controller_count=0
+ compute_wait_completed=false
for node in ${nodes}; do
- cd /tmp
##remove VM nodes incase it wasn't cleaned up
- rm -rf /tmp/$node
+ rm -rf $vm_dir/$node
+ rm -rf /tmp/genesis/
- ##clone bgs vagrant
- ##will change this to be opnfv repo when commit is done
- if ! git clone -b v1.0 https://github.com/trozet/bgs_vagrant.git $node; then
- printf '%s\n' 'deploy.sh: Unable to clone vagrant repo' >&2
- exit 1
- fi
+ ##clone genesis and move into node folder
+ clone_bgs $vm_dir/$node
- cd $node
+ cd $vm_dir/$node
if [ $base_config ]; then
if ! cp -f $base_config opnfv_ksgen_settings.yml; then
- echo "{red}ERROR: Unable to copy $base_config to opnfv_ksgen_settings.yml${reset}"
+ echo "${red}ERROR: Unable to copy $base_config to opnfv_ksgen_settings.yml${reset}"
exit 1
fi
fi
node_type=config_nodes_${node}_type
node_type=$(eval echo \$$node_type)
- ##find number of interfaces with ip and substitute in VagrantFile
- output=`ifconfig | grep -E "^[a-zA-Z0-9]+:"| grep -Ev "lo|tun|virbr|vboxnet" | awk '{print $1}' | sed 's/://'`
+ ##modify memory and cpu
+ node_memory=$(eval echo \${config_nodes_${node}_memory})
+ node_vcpus=$(eval echo \${config_nodes_${node}_cpus})
+ node_storage=$(eval echo \${config_nodes_${node}_disk})
- if [ ! "$output" ]; then
- printf '%s\n' 'deploy.sh: Unable to detect interfaces to bridge to' >&2
+ sed -i 's/^.*vb.memory =.*$/ vb.memory = '"$node_memory"'/' Vagrantfile
+ sed -i 's/^.*vb.cpus =.*$/ vb.cpus = '"$node_vcpus"'/' Vagrantfile
+
+ if ! resize_vagrant_disk $node_storage; then
+ echo "${red}Error while resizing vagrant box to size $node_storage for $node! ${reset}"
exit 1
fi
+ ##trozet test make compute nodes wait 20 minutes
+ if [ "$compute_wait_completed" = false ] && [ "$node_type" != "controller" ]; then
+ echo "${blue}Waiting 20 minutes for Control nodes to install before continuing with Compute nodes..."
+ compute_wait_completed=true
+ sleep 1400
+ fi
- if_counter=0
- for interface in ${output}; do
-
- if [ "$if_counter" -ge 4 ]; then
- break
+ ## Add Admin interface
+ mac_string=config_nodes_${node}_mac_address
+ mac_addr=$(eval echo \$$mac_string)
+ mac_addr=$(echo $mac_addr | sed 's/:\|-//g')
+ if [ $mac_addr == "" ]; then
+ echo "${red} Unable to find mac_address for $node! ${reset}"
+ exit 1
+ fi
+ this_admin_ip=${admin_ip_arr[$node]}
+ sed -i 's/^.*eth_replace0.*$/ config.vm.network "private_network", virtualbox__intnet: "my_admin_network", ip: '\""$this_admin_ip"\"', netmask: '\""$admin_subnet_mask"\"', :mac => '\""$mac_addr"\"'/' Vagrantfile
+
+ ## Add private interface
+ if [ "$node_type" == "controller" ]; then
+ mac_string=config_nodes_${node}_private_mac
+ mac_addr=$(eval echo \$$mac_string)
+ if [ $mac_addr == "" ]; then
+ echo "${red} Unable to find private_mac for $node! ${reset}"
+ exit 1
+ fi
+ else
+ ##generate random mac
+ mac_addr=$(echo -n 00-60-2F; dd bs=1 count=3 if=/dev/random 2>/dev/null |hexdump -v -e '/1 "-%02X"')
+ fi
+ mac_addr=$(echo $mac_addr | sed 's/:\|-//g')
+ if [ "$node_type" == "controller" ]; then
+ new_node_ip=${controllers_ip_arr[$controller_count]}
+ if [ ! "$new_node_ip" ]; then
+ echo "{red}ERROR: Empty node ip for controller $controller_count ${reset}"
+ exit 1
fi
- interface_ip=$(find_ip $interface)
- if [ ! "$interface_ip" ]; then
- continue
+ ((controller_count++))
+ else
+ next_private_ip=$(next_ip $next_private_ip)
+ if [ ! "$next_private_ip" ]; then
+ echo "{red}ERROR: Could not find private ip for $node ${reset}"
+ exit 1
fi
- case "${if_counter}" in
- 0)
- mac_string=config_nodes_${node}_mac_address
- mac_addr=$(eval echo \$$mac_string)
- mac_addr=$(echo $mac_addr | sed 's/:\|-//g')
- if [ $mac_addr == "" ]; then
- echo "${red} Unable to find mac_address for $node! ${reset}"
- exit 1
- fi
- ;;
- 1)
- if [ "$node_type" == "controller" ]; then
- mac_string=config_nodes_${node}_private_mac
- mac_addr=$(eval echo \$$mac_string)
- if [ $mac_addr == "" ]; then
- echo "${red} Unable to find private_mac for $node! ${reset}"
- exit 1
- fi
- else
- ##generate random mac
- mac_addr=$(echo -n 00-60-2F; dd bs=1 count=3 if=/dev/random 2>/dev/null |hexdump -v -e '/1 "-%02X"')
- fi
- mac_addr=$(echo $mac_addr | sed 's/:\|-//g')
- ;;
- *)
- mac_addr=$(echo -n 00-60-2F; dd bs=1 count=3 if=/dev/random 2>/dev/null |hexdump -v -e '/1 "-%02X"')
- mac_addr=$(echo $mac_addr | sed 's/:\|-//g')
- ;;
- esac
- sed -i 's/^.*eth_replace'"$if_counter"'.*$/ config.vm.network "public_network", bridge: '\'"$interface"\'', :mac => '\""$mac_addr"\"'/' Vagrantfile
- ((if_counter++))
- done
+ new_node_ip=$next_private_ip
+ fi
+ sed -i 's/^.*eth_replace1.*$/ config.vm.network "private_network", virtualbox__intnet: "my_private_network", :mac => '\""$mac_addr"\"', ip: '\""$new_node_ip"\"', netmask: '\""$private_subnet_mask"\"'/' Vagrantfile
+ ##replace host_ip in vm_nodes_provision with private ip
+ sed -i 's/^host_ip=REPLACE/host_ip='$new_node_ip'/' vm_nodes_provision.sh
+ ##replace ping site
+ if [ ! -z "$ping_site" ]; then
+ sed -i 's/www.google.com/'$ping_site'/' vm_nodes_provision.sh
+ fi
+
+ ##find public ip info and add public interface
+ mac_addr=$(echo -n 00-60-2F; dd bs=1 count=3 if=/dev/random 2>/dev/null |hexdump -v -e '/1 "-%02X"')
+ mac_addr=$(echo $mac_addr | sed 's/:\|-//g')
+ this_public_ip=${public_ip_arr[$node]}
- ##now remove interface config in Vagrantfile for 1 node
- ##if 1, 3, or 4 interfaces set deployment type
- ##if 2 interfaces remove 2nd interface and set deployment type
- if [ "$if_counter" == 1 ]; then
- deployment_type="single_network"
- remove_vagrant_network eth_replace1
- remove_vagrant_network eth_replace2
- remove_vagrant_network eth_replace3
- elif [ "$if_counter" == 2 ]; then
- deployment_type="single_network"
- second_interface=`echo $output | awk '{print $2}'`
- remove_vagrant_network $second_interface
- remove_vagrant_network eth_replace2
- elif [ "$if_counter" == 3 ]; then
- deployment_type="three_network"
- remove_vagrant_network eth_replace3
+ if [ -z "$enable_virtual_dhcp" ]; then
+ sed -i 's/^.*eth_replace2.*$/ config.vm.network "public_network", bridge: '\'"$public_interface"\'', :mac => '\""$mac_addr"\"', ip: '\""$this_public_ip"\"', netmask: '\""$public_subnet_mask"\"'/' Vagrantfile
else
- deployment_type="multi_network"
+ sed -i 's/^.*eth_replace2.*$/ config.vm.network "public_network", bridge: '\'"$public_interface"\'', :mac => '\""$mac_addr"\"'/' Vagrantfile
fi
+ remove_vagrant_network eth_replace3
##modify provisioning to do puppet install, config, and foreman check-in
##substitute host_name and dns_server in the provisioning script
- host_string=config_nodes_${node}_hostname
- host_name=$(eval echo \$$host_string)
+ host_string=config_nodes_${node}_short_name
+ short_host_name=$(eval echo \$$host_string)
+ ##substitute domain_name
+ domain_name=$config_domain_name
+ sed -i 's/^domain_name=REPLACE/domain_name='$domain_name'/' vm_nodes_provision.sh
+ host_name=${short_host_name}.${domain_name}
sed -i 's/^host_name=REPLACE/host_name='$host_name'/' vm_nodes_provision.sh
##dns server should be the foreman server
sed -i 's/^dns_server=REPLACE/dns_server='${interface_ip_arr[0]}'/' vm_nodes_provision.sh
-
## remove bootstrap and NAT provisioning
sed -i '/nat_setup.sh/d' Vagrantfile
sed -i 's/bootstrap.sh/vm_nodes_provision.sh/' Vagrantfile
-
## modify default_gw to be node_default_gw
sed -i 's/^.*default_gw =.*$/ default_gw = '\""$node_default_gw"\"'/' Vagrantfile
-
- ## modify VM memory to be 4gig
- sed -i 's/^.*vb.memory =.*$/ vb.memory = 4096/' Vagrantfile
-
echo "${blue}Starting Vagrant Node $node! ${reset}"
-
##stand up vagrant
if ! vagrant up; then
echo "${red} Unable to start $node ${reset}"
else
echo "${blue} $node VM is up! ${reset}"
fi
-
done
-
echo "${blue} All VMs are UP! ${reset}"
+ echo "${blue} Waiting for puppet to complete on the nodes... ${reset}"
+ ##check puppet is complete
+ ##ssh into foreman server, run check to verify puppet is complete
+ pushd $vm_dir/foreman_vm
+ if ! vagrant ssh -c "/opt/khaleesi/run.sh --no-logs --use /vagrant/opnfv_ksgen_settings.yml /opt/khaleesi/playbooks/validate_opnfv-vm.yml"; then
+ echo "${red} Failed to validate puppet completion on nodes ${reset}"
+ exit 1
+ else
+ echo "{$blue} Puppet complete on all nodes! ${reset}"
+ fi
+ popd
+ ##add routes back to nodes
+ for node in ${nodes}; do
+ pushd $vm_dir/$node
+ if ! vagrant ssh -c "route | grep default | grep $this_default_gw"; then
+ echo "${blue} Adding public route back to $node! ${reset}"
+ vagrant ssh -c "route add default gw $this_default_gw"
+ vagrant ssh -c "route delete default gw 10.0.2.2"
+ fi
+ popd
+ done
+ if [ ! -z "$horizon_public_vip" ]; then
+ echo "${blue} Virtual deployment SUCCESS!! Foreman URL: http://${foreman_ip}, Horizon URL: http://${horizon_public_vip} ${reset}"
+ else
+ ##Find public IP of controller
+ for node in ${nodes}; do
+ node_type=config_nodes_${node}_type
+ node_type=$(eval echo \$$node_type)
+ if [ "$node_type" == "controller" ]; then
+ pushd $vm_dir/$node
+ horizon_ip=`vagrant ssh -c "ifconfig enp0s10" | grep -Eo "inet [0-9\.]+" | awk {'print $2'}`
+ popd
+ break
+ fi
+ done
+ if [ -z "$horizon_ip" ]; then
+ echo "${red}Warn: Unable to determine horizon IP, please login to your controller node to find it${reset}"
+ fi
+ echo "${blue} Virtual deployment SUCCESS!! Foreman URL: http://${foreman_ip}, Horizon URL: http://${horizon_ip} ${reset}"
+ fi
+ fi
+}
+
+##check to make sure nodes are powered off
+##this function does nothing if virtual
+##params: none
+##usage: check_baremetal_nodes()
+check_baremetal_nodes() {
+ if [ $virtual ]; then
+ echo "${blue}Skipping Baremetal node power status check as deployment is virtual ${reset}"
+ else
+ echo "${blue}Checking Baremetal nodes power state... ${reset}"
+ if [ ! -z "$base_config" ]; then
+ # Install ipmitool
+ # Major version is pinned to force some consistency for Arno
+ if ! yum list installed | grep -i ipmitool; then
+ echo "${blue}Installing ipmitool...${reset}"
+ if ! yum -y install ipmitool-1*; then
+ echo "${red}Failed to install ipmitool!${reset}"
+ exit 1
+ fi
+ fi
+
+ ###find all the bmc IPs and number of nodes
+ node_counter=0
+ output=`grep bmc_ip $base_config | grep -Eo '[0-9]+.[0-9]+.[0-9]+.[0-9]+'`
+ for line in ${output} ; do
+ bmc_ip[$node_counter]=$line
+ ((node_counter++))
+ done
+
+ max_nodes=$((node_counter-1))
+
+ ###find bmc_users per node
+ node_counter=0
+ output=`grep bmc_user $base_config | sed 's/\s*bmc_user:\s*//'`
+ for line in ${output} ; do
+ bmc_user[$node_counter]=$line
+ ((node_counter++))
+ done
+
+ ###find bmc_pass per node
+ node_counter=0
+ output=`grep bmc_pass $base_config | sed 's/\s*bmc_pass:\s*//'`
+ for line in ${output} ; do
+ bmc_pass[$node_counter]=$line
+ ((node_counter++))
+ done
+
+ for mynode in `seq 0 $max_nodes`; do
+ echo "${blue}Node: ${bmc_ip[$mynode]} ${bmc_user[$mynode]} ${bmc_pass[$mynode]} ${reset}"
+ ipmi_output=`ipmitool -I lanplus -P ${bmc_pass[$mynode]} -U ${bmc_user[$mynode]} -H ${bmc_ip[$mynode]} chassis status \
+ | grep "System Power" | cut -d ':' -f2 | tr -d [:blank:]`
+ if [ "$ipmi_output" == "on" ]; then
+ echo "${red}Error: Node is powered on: ${bmc_ip[$mynode]} ${reset}"
+ echo "${red}Please run clean.sh before running deploy! ${reset}"
+ exit 1
+ elif [ "$ipmi_output" == "off" ]; then
+ echo "${blue}Node: ${bmc_ip[$mynode]} is powered off${reset}"
+ else
+ echo "${red}Warning: Unable to detect node power state: ${bmc_ip[$mynode]} ${reset}"
+ fi
+ done
+ else
+ echo "${red}base_config was not provided for a baremetal install! Exiting${reset}"
+ exit 1
+ fi
+ fi
+}
+
+##resizes vagrant disk (cannot shrink)
+##params: size in GB
+##usage: resize_vagrant_disk 100
+resize_vagrant_disk() {
+ if [[ "$1" < 40 ]]; then
+ echo "${blue}Warn: Requested disk size cannot be less than 40, using 40 as new size${reset}"
+ new_size_gb=40
+ else
+ new_size_gb=$1
+ fi
+
+ if ! vagrant box list | grep opnfv; then
+ vagrant box remove -f opnfv/centos-7.0
+ if ! vagrant box add opnfv/centos-7.0 --provider virtualbox; then
+ echo "${red}Unable to reclone vagrant box! Exiting...${reset}"
+ exit 1
+ fi
+ fi
+ pushd $vagrant_box_dir
+
+ # Close medium to make sure we can modify it
+ vboxmanage closemedium disk $vagrant_box_vmdk
+
+ cur_size=$(vboxmanage showhdinfo $vagrant_box_vmdk | grep -i capacity | grep -Eo [0-9]+)
+ cur_size_gb=$((cur_size / 1024))
+
+ if [ "$cur_size_gb" -eq "$new_size_gb" ]; then
+ echo "${blue}Info: Disk size already ${cur_size_gb} ${reset}"
+ popd
+ return
+ elif [[ "$new_size_gb" < "$cur_size_gb" ]] ; then
+ echo "${blue}Info: Requested disk is less than ${cur_size_gb} ${reset}"
+ echo "${blue}Re-adding vagrant box${reset}"
+ if vagrant box list | grep opnfv; then
+ popd
+ vagrant box remove -f opnfv/centos-7.0
+ if ! vagrant box add opnfv/centos-7.0 --provider virtualbox; then
+ echo "${red}Unable to reclone vagrant box! Exiting...${reset}"
+ exit 1
+ fi
+ pushd $vagrant_box_dir
+ fi
fi
+
+ new_size=$((new_size_gb * 1024))
+ if ! vboxmanage clonehd $vagrant_box_vmdk tmp-disk.vdi --format vdi; then
+ echo "${red}Error: Unable to clone ${vagrant_box_vmdk}${reset}"
+ popd
+ return 1
+ fi
+
+ if ! vboxmanage modifyhd tmp-disk.vdi --resize $new_size; then
+ echo "${red}Error: Unable modify tmp-disk.vdi to ${new_size}${reset}"
+ popd
+ return 1
+ fi
+
+ if ! vboxmanage clonehd tmp-disk.vdi resized-disk.vmdk --format vmdk; then
+ echo "${red}Error: Unable clone tmp-disk.vdi to vmdk${reset}"
+ popd
+ return 1
+ fi
+
+ vboxmanage closemedium disk tmp-disk.vdi --delete
+ rm -f tmp-disk.vdi $vagrant_box_vmdk
+ cp -f resized-disk.vmdk $vagrant_box_vmdk
+ vboxmanage closemedium disk resized-disk.vmdk --delete
+ popd
}
##END FUNCTIONS
main() {
parse_cmdline "$@"
disable_selinux
+ check_baremetal_nodes
install_EPEL
install_vbox
install_ansible
install_vagrant
clean_tmp
- clone_bgs
+ verify_vm_dir
+ clone_bgs $vm_dir/foreman_vm
configure_network
configure_virtual
start_foreman
- start_virutal_nodes
+ start_virtual_nodes
}
main "$@"
Code Review / genesis.git / blobdiff