From 6da365c5898a3a20638dc18b21cb1c307b61f711 Mon Sep 17 00:00:00 2001
From: ChristopherPrice <christopher.price@ericsson.com>
Date: Tue, 26 Jul 2016 12:05:00 +0200
Subject: [PATCH] Updating the scenario installation template based on
 comments.

Commets from https://gerrit.opnfv.org/gerrit/#/c/16837 adressed.

Change-Id: I83a58c5ec6088805a8670bc7801351d33c6e5fa8
Signed-off-by: ChristopherPrice <christopher.price@ericsson.com>
---
 .../template-os-nosdn-nofeature-ha/deployment.rst  |   4 +-
 .../hardware.requirements.rst                      |  88 +--
 .../installation-instruction.rst                   | 608 ---------------------
 .../installation.rst                               |  10 +-
 .../template-os-nosdn-nofeature-ha/preparation.rst |  18 +-
 5 files changed, 33 insertions(+), 695 deletions(-)
 delete mode 100644 docs/installationprocedure/template-os-nosdn-nofeature-ha/installation-instruction.rst

diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/deployment.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/deployment.rst
index 4889d8380..4a8852ee6 100644
--- a/docs/installationprocedure/template-os-nosdn-nofeature-ha/deployment.rst
+++ b/docs/installationprocedure/template-os-nosdn-nofeature-ha/deployment.rst
@@ -10,7 +10,7 @@ It is important that the Verify Networks action is performed as it will verify
 that communicate works for the networks you have setup, as well as check that
 packages needed for a successful deployment can be fetched.
 
-#. From the FUEL UI in your Environment, Select the Networks Tab and select "Connectivity check" on the left pane
+From the FUEL UI in your Environment, Select the Networks Tab and select "Connectivity check" on the left pane
 
    - Select <Verify Networks>
 
@@ -19,7 +19,7 @@ packages needed for a successful deployment can be fetched.
 Deploy Your Environment
 -----------------------
 
-38. Deploy the environment.
+Deploy the environment.
 
     - In the Fuel GUI, click on the "Dashboard" Tab.
 
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/hardware.requirements.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/hardware.requirements.rst
index 082d4e96b..328f92199 100644
--- a/docs/installationprocedure/template-os-nosdn-nofeature-ha/hardware.requirements.rst
+++ b/docs/installationprocedure/template-os-nosdn-nofeature-ha/hardware.requirements.rst
@@ -5,81 +5,23 @@
 Hardware requirements
 =====================
 
-The following minimum hardware requirements must be met for the
-installation of <template> scenario:
+The Pharos Lab
+--------------
 
-+--------------------+------------------------------------------------------+
-| **HW Aspect**      | **Requirement**                                      |
-|                    |                                                      |
-+====================+======================================================+
-| **# of nodes**     | Minimum 5 (3 for non redundant deployment):          |
-|                    |                                                      |
-|                    | - 1 Fuel deployment master (may be virtualized)      |
-|                    |                                                      |
-|                    | - 3(1) Controllers (1 colocated mongo/ceilometer     |
-|                    |   role, 2 Ceph-OSD roles)                            |
-|                    |                                                      |
-|                    | - 1 Compute (1 co-located Ceph-OSD role)             |
-|                    |                                                      |
-+--------------------+------------------------------------------------------+
-| **CPU**            | Minimum 1 socket x86_AMD64 with Virtualization       |
-|                    | support                                              |
-+--------------------+------------------------------------------------------+
-| **RAM**            | Minimum 16GB/server (Depending on VNF work load)     |
-|                    |                                                      |
-+--------------------+------------------------------------------------------+
-| **Disk**           | Minimum 256GB 10kRPM spinning disks                  |
-|                    |                                                      |
-+--------------------+------------------------------------------------------+
-| **Networks**       | 4 Tagged VLANs (PUBLIC, MGMT, STORAGE, PRIVATE)      |
-|                    |                                                      |
-|                    | 1 Un-Tagged VLAN for PXE Boot - ADMIN Network        |
-|                    |                                                      |
-|                    | Note: These can be allocated to a single NIC -       |
-|                    | or spread out over multiple NICs as your hardware    |
-|                    | supports.                                            |
-+--------------------+------------------------------------------------------+
+Hardware requirements for OPNFV infrastuctures are specified by the Pharos project.
+The Pharos project provides an OPNFV hardware specification for configuring your hardware
+at: http://artifacts.opnfv.org/pharos/docs/pharos-spec.html .
 
-Help with Hardware Requirements
-===============================
+Virtual deployment hardware requirements
+----------------------------------------
 
-Calculate hardware requirements:
+To perform a virtual deployment of an OPNFV scenario establised different hardware requirements.
+The server requirements for this type of deployment are outlined in the <missing spec>.
 
-For information on compatible hardware types available for use, please see *Reference: 11*.
-
-When choosing the hardware on which you will deploy your OpenStack
-environment, you should think about:
-
-- CPU -- Consider the number of virtual machines that you plan to deploy in your cloud environment and the CPU per virtual machine.
-
-- Memory -- Depends on the amount of RAM assigned per virtual machine and the controller node.
-
-- Storage -- Depends on the local drive space per virtual machine, remote volumes that can be attached to a virtual machine, and object storage.
-
-- Networking -- Depends on the Choose Network Topology, the network bandwidth per virtual machine, and network storage.
-
-
-Top of the rack (TOR) Configuration requirements
-================================================
-
-The switching infrastructure provides connectivity for the OPNFV
-infrastructure operations, tenant networks (East/West) and provider
-connectivity (North/South); it also provides needed connectivity for
-the Storage Area Network (SAN).
-To avoid traffic congestion, it is strongly suggested that three
-physically separated networks are used, that is: 1 physical network
-for administration and control, one physical network for tenant private
-and public networks, and one physical network for SAN.
-The switching connectivity can (but does not need to) be fully redundant,
-in such case it comprises a redundant 10GE switch pair for each of the
-three physically separated networks.
-
-The physical TOR switches are **not** automatically configured from
-the Fuel OPNFV reference platform. All the networks involved in the OPNFV
-infrastructure as well as the provider networks and the private tenant
-VLANs needs to be manually configured.
-
-Manual configuration of the Brahmaputra hardware platform should
-be carried out according to the OPNFV Pharos specification:
-<https://wiki.opnfv.org/pharos/pharos_specification>
+.. Additional Hardware requirements
+.. --------------------------------
+..
+.. Your scenario may require specific capabilities that are not explicitly stated in
+.. the Pharos spec.  If this is the case add your specific hardware requirements to this
+.. section of the document under sub-headings.
 
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/installation-instruction.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/installation-instruction.rst
deleted file mode 100644
index b5383327b..000000000
--- a/docs/installationprocedure/template-os-nosdn-nofeature-ha/installation-instruction.rst
+++ /dev/null
@@ -1,608 +0,0 @@
-========================================================================================================
-OPNFV Installation instruction for the Brahmaputra release of OPNFV when using Fuel as a deployment tool
-========================================================================================================
-
-License
-=======
-
-This work is licensed under a Creative Commons Attribution 4.0 International
-License. .. http://creativecommons.org/licenses/by/4.0 ..
-(c) Jonas Bjurel (Ericsson AB) and others
-
-Abstract
-========
-
-This document describes how to install the Brahmaputra release of
-OPNFV when using Fuel as a deployment tool, covering  it's usage,
-limitations, dependencies and required system resources.
-
-Introduction
-============
-
-This document provides guidelines on how to install and
-configure the Brahmaputra release of OPNFV when using Fuel as a
-deployment tool, including required software and hardware configurations.
-
-Although the available installation options give a high degree of
-freedom in how the system is set-up, including architecture, services
-and features, etc., said permutations may not provide an OPNFV
-compliant reference architecture. This instruction provides a
-step-by-step guide that results in an OPNFV Brahmaputra compliant
-deployment.
-
-The audience of this document is assumed to have good knowledge in
-networking and Unix/Linux administration.
-
-Hardware requirements
-=====================
-
-The following minimum hardware requirements must be met for the
-installation of Brahmaputra using Fuel:
-
-+--------------------+------------------------------------------------------+
-| **HW Aspect**      | **Requirement**                                      |
-|                    |                                                      |
-+====================+======================================================+
-| **# of nodes**     | Minimum 5 (3 for non redundant deployment):          |
-|                    |                                                      |
-|                    | - 1 Fuel deployment master (may be virtualized)      |
-|                    |                                                      |
-|                    | - 3(1) Controllers (1 colocated mongo/ceilometer     |
-|                    |   role, 2 Ceph-OSD roles)                            |
-|                    |                                                      |
-|                    | - 1 Compute (1 co-located Ceph-OSD role)             |
-|                    |                                                      |
-+--------------------+------------------------------------------------------+
-| **CPU**            | Minimum 1 socket x86_AMD64 with Virtualization       |
-|                    | support                                              |
-+--------------------+------------------------------------------------------+
-| **RAM**            | Minimum 16GB/server (Depending on VNF work load)     |
-|                    |                                                      |
-+--------------------+------------------------------------------------------+
-| **Disk**           | Minimum 256GB 10kRPM spinning disks                  |
-|                    |                                                      |
-+--------------------+------------------------------------------------------+
-| **Networks**       | 4 Tagged VLANs (PUBLIC, MGMT, STORAGE, PRIVATE)      |
-|                    |                                                      |
-|                    | 1 Un-Tagged VLAN for PXE Boot - ADMIN Network        |
-|                    |                                                      |
-|                    | Note: These can be allocated to a single NIC -       |
-|                    | or spread out over multiple NICs as your hardware    |
-|                    | supports.                                            |
-+--------------------+------------------------------------------------------+
-
-Help with Hardware Requirements
-===============================
-
-Calculate hardware requirements:
-
-For information on compatible hardware types available for use, please see *Reference: 11*.
-
-When choosing the hardware on which you will deploy your OpenStack
-environment, you should think about:
-
-- CPU -- Consider the number of virtual machines that you plan to deploy in your cloud environment and the CPU per virtual machine.
-
-- Memory -- Depends on the amount of RAM assigned per virtual machine and the controller node.
-
-- Storage -- Depends on the local drive space per virtual machine, remote volumes that can be attached to a virtual machine, and object storage.
-
-- Networking -- Depends on the Choose Network Topology, the network bandwidth per virtual machine, and network storage.
-
-
-Top of the rack (TOR) Configuration requirements
-================================================
-
-The switching infrastructure provides connectivity for the OPNFV
-infrastructure operations, tenant networks (East/West) and provider
-connectivity (North/South); it also provides needed connectivity for
-the Storage Area Network (SAN).
-To avoid traffic congestion, it is strongly suggested that three
-physically separated networks are used, that is: 1 physical network
-for administration and control, one physical network for tenant private
-and public networks, and one physical network for SAN.
-The switching connectivity can (but does not need to) be fully redundant,
-in such case it comprises a redundant 10GE switch pair for each of the
-three physically separated networks.
-
-The physical TOR switches are **not** automatically configured from
-the Fuel OPNFV reference platform. All the networks involved in the OPNFV
-infrastructure as well as the provider networks and the private tenant
-VLANs needs to be manually configured.
-
-Manual configuration of the Brahmaputra hardware platform should
-be carried out according to the OPNFV Pharos specification:
-<https://wiki.opnfv.org/pharos/pharos_specification>
-
-OPNFV Software installation and deployment
-==========================================
-
-This section describes the installation of the OPNFV installation
-server (Fuel master) as well as the deployment of the full OPNFV
-reference platform stack across a server cluster.
-
-Install Fuel master
--------------------
-#. Mount the Brahmaputra Fuel ISO file/media as a boot device to the jump host server.
-
-#. Reboot the jump host to establish the Fuel server.
-
-   - The system now boots from the ISO image.
-
-   - Select "Fuel Install (Static IP)" (See figure below)
-
-   - Press [Enter].
-
-   .. figure:: img/grub-1.png
-
-#. Wait until screen Fuel setup is shown (Note: This can take up to 30 minutes).
-
-#. In the "Fuel User" section - Confirm/change the default password (See figure below)
-
-   - Enter "admin" in the Fuel password input
-
-   - Enter "admin" in the Confirm password input
-
-   - Select "Check" and press [Enter]
-
-   .. figure:: img/fuelmenu1.png
-
-#. In the "Network Setup" section - Configure DHCP/Static IP information for your FUEL node - For example, ETH0 is 10.20.0.2/24 for FUEL booting and ETH1 is DHCP in your corporate/lab network (see figure below).
-
-   - Configure eth1 or other network interfaces here as well (if you have them present on your FUEL server).
-
-   .. figure:: img/fuelmenu2.png
-
-#. In the "PXE Setup" section (see figure below) - Change the following fields to appropriate values (example below):
-
-   - DHCP Pool Start 10.20.0.3
-
-   - DHCP Pool End 10.20.0.254
-
-   - DHCP Pool Gateway  10.20.0.2 (IP address of Fuel node)
-
-   .. figure:: img/fuelmenu3.png
-
-#. In the "DNS & Hostname" section (see figure below) - Change the following fields to appropriate values:
-
-   - Hostname
-
-   - Domain
-
-   - Search Domain
-
-   - External DNS
-
-   - Hostname to test DNS
-
-   - Select <Check> and press [Enter]
-
-   .. figure:: img/fuelmenu4.png
-
-
-#. OPTION TO ENABLE PROXY SUPPORT - In the "Bootstrap Image" section (see figure below), edit the following fields to define a proxy. (**NOTE:** cannot be used in tandem with local repository support)
-
-   - Navigate to "HTTP proxy" and enter your http proxy address
-
-   - Select <Check> and press [Enter]
-
-   .. figure:: img/fuelmenu5.png
-
-#. In the "Time Sync" section (see figure below) - Change the following fields to appropriate values:
-
-   - NTP Server 1 <Customer NTP server 1>
-
-   - NTP Server 2 <Customer NTP server 2>
-
-   - NTP Server 3 <Customer NTP server 3>
-
-   .. figure:: img/fuelmenu6.png
-
-#. Start the installation.
-
-   - Select Quit Setup and press Save and Quit.
-
-   - Installation starts, wait until the login screen is shown.
-
-
-Boot the Node Servers
----------------------
-
-After the Fuel Master node has rebooted from the above steps and is at
-the login prompt, you should boot the Node Servers (Your
-Compute/Control/Storage blades (nested or real) with a PXE booting
-scheme so that the FUEL Master can pick them up for control.
-
-#. Enable PXE booting
-
-   - For every controller and compute server: enable PXE Booting as the first boot device in the BIOS boot order menu and hard disk as the second boot device in the same menu.
-
-#. Reboot all the control and compute blades.
-
-#. Wait for the availability of nodes showing up in the Fuel GUI.
-
-   - Connect to the FUEL UI via the URL provided in the Console (default: https://10.20.0.2:8443)
-
-   - Wait until all nodes are displayed in top right corner of the Fuel GUI: Total nodes and Unallocated nodes (see figure below).
-
-   .. figure:: img/nodes.png
-
-
-Install additional Plugins/Features on the FUEL node
-----------------------------------------------------
-
-#. SSH to your FUEL node (e.g. root@10.20.0.2  pwd: r00tme)
-
-#. Select wanted plugins/features from the /opt/opnfv/ directory.
-
-#. Install the wanted plugin with the command "fuel plugins --install /opt/opnfv/<plugin-name>-<version>.<arch>.rpm"
-   Expected output: "Plugin ....... was successfully installed." (see figure below)
-
-   .. figure:: img/plugin_install.png
-
-Create an OpenStack Environment
--------------------------------
-
-#. Connect to Fuel WEB UI with a browser (default: https://10.20.0.2:8443) (login admin/admin)
-
-#. Create and name a new OpenStack environment, to be installed.
-
-   .. figure:: img/newenv.png
-
-#. Select "<Liberty on Ubuntu 14.04>" and press <Next>
-
-#. Select "compute virtulization method".
-
-   - Select "QEMU-KVM as hypervisor" and press <Next>
-
-#. Select "network mode".
-
-   - Select "Neutron with ML2 plugin"
-
-   - Select "Neutron with tunneling segmentation" (Required when using the ODL or ONOS plugins)
-
-   - Press <Next>
-
-#. Select "Storage Back-ends".
-
-   - Select "Ceph for block storage" and press <Next>
-
-#. Select "additional services" you wish to install.
-
-   - Check option "Install Ceilometer (OpenStack Telemetry)" and press <Next>
-
-#. Create the new environment.
-
-   - Click <Create> Button
-
-Configure the network environment
----------------------------------
-
-#. Open the environment you previously created.
-
-#. Open the networks tab and select the "default Node Networks group to" on the left pane (see figure below).
-
-   .. figure:: img/network.png
-
-#. Update the Public network configuration and change the following fields to appropriate values:
-
-   - CIDR to <CIDR for Public IP Addresses>
-
-   - IP Range Start to <Public IP Address start>
-
-   - IP Range End to <Public IP Address end>
-
-   - Gateway to <Gateway for Public IP Addresses>
-
-   - Check <VLAN tagging>.
-
-   - Set appropriate VLAN id.
-
-#. Update the Storage Network Configuration
-
-   - Set CIDR to appropriate value  (default 192.168.1.0/24)
-
-   - Set IP Range Start to appropriate value (default 192.168.1.1)
-
-   - Set IP Range End to appropriate value (default 192.168.1.254)
-
-   - Set vlan to appropriate value  (default 102)
-
-#. Update the Management network configuration.
-
-   - Set CIDR to appropriate value (default 192.168.0.0/24)
-
-   - Set IP Range Start to appropriate value (default 192.168.0.1)
-
-   - Set IP Range End to appropriate value (default 192.168.0.254)
-
-   - Check <VLAN tagging>.
-
-   - Set appropriate VLAN id. (default 101)
-
-#. Update the Private Network Information
-
-   - Set CIDR to appropriate value (default 192.168.2.0/24
-
-   - Set IP Range Start to appropriate value (default 192.168.2.1)
-
-   - Set IP Range End to appropriate value (default 192.168.2.254)
-
-   - Check <VLAN tagging>.
-
-   - Set appropriate VLAN tag (default 103)
-
-#. Select the "Neutron L3 Node Networks group" on the left pane.
-
-   .. figure:: img/neutronl3.png
-
-#. Update the Floating Network configuration.
-
-   - Set the Floating IP range start (default 172.16.0.130)
-
-   - Set the Floating IP range end (default 172.16.0.254)
-
-   - Set the Floating network name (default admin_floating_net)
-
-#. Update the Internal Network configuration.
-
-   - Set Internal network CIDR to an appropriate value (default 192.168.111.0/24)
-
-   - Set Internal network gateway to an appropriate value
-
-   - Set the Internal network name (default admin_internal_net)
-
-#. Update the Guest OS DNS servers.
-
-   - Set Guest OS DNS Server values appropriately
-
-#. Save Settings.
-
-#. Select the "Other Node Networks group" on the left pane(see figure below).
-
-   .. figure:: img/other.png
-
-#. Update the Public network assignment.
-
-   - Check the box for "Assign public network to all nodes" (Required by OpenDaylight)
-
-#. Update Host OS DNS Servers.
-
-   - Provide the DNS server settings
-
-#. Update Host OS NTP Servers.
-
-   - Provide the NTP server settings
-
-Select Hypervisor type
-----------------------
-
-#. In the FUEL UI of your Environment, click the "Settings" Tab
-
-#. Select Compute on the left side pane (see figure below)
-
-   - Check the KVM box and press "Save settings"
-
-   .. figure:: img/compute.png
-
-Enable Plugins
---------------
-
-#. In the FUEL UI of your Environment, click the "Settings" Tab
-
-#. Select Other on the left side pane (see figure below)
-
-   - Enable and configure the plugins of your choice
-
-   .. figure:: img/plugins.png
-
-Allocate nodes to environment and assign functional roles
----------------------------------------------------------
-
-#. Click on the "Nodes" Tab in the FUEL WEB UI (see figure below).
-
-    .. figure:: img/addnodes.png
-
-#. Assign roles (see figure below).
-
-    - Click on the <+Add Nodes> button
-
-    - Check <Controller>, <Telemetry - MongoDB>  and optionally an SDN Controller role (OpenDaylight controller/ONOS) in the Assign Roles Section.
-
-    - Check one node which you want to act as a Controller from the bottom half of the screen
-
-    - Click <Apply Changes>.
-
-    - Click on the <+Add Nodes> button
-
-    - Check the <Controller> and <Storage - Ceph OSD> roles.
-
-    - Check the two next nodes you want to act as Controllers from the bottom half of the screen
-
-    - Click <Apply Changes>
-
-    - Click on <+Add Nodes> button
-
-    - Check the <Compute> and <Storage - Ceph OSD> roles.
-
-    - Check the Nodes you want to act as Computes from the bottom half of the screen
-
-    - Click <Apply Changes>.
-
-    .. figure:: img/computelist.png
-
-#. Configure interfaces (see figure below).
-
-    - Check Select <All> to select all allocated nodes
-
-    - Click <Configure Interfaces>
-
-    - Assign interfaces (bonded) for mgmt-, admin-, private-, public-
-      and storage networks
-
-    - Click <Apply>
-
-    .. figure:: img/interfaceconf.png
-
-
-OPTIONAL - Set Local Mirror Repos
----------------------------------
-
-The following steps can be executed if you are in an environment with
-no connection to the Internet. The Fuel server delivers a local repo
-that can be used for installation / deployment of openstack.
-
-#. In the Fuel UI of your Environment, click the Settings Tab and select General from the left pane.
-
-   - Replace the URI values for the "Name" values outlined below:
-
-   - "ubuntu" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ trusty main"
-
-   - "ubuntu-security" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ trusty-security main"
-
-   - "ubuntu-updates" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ trusty-updates main"
-
-   - "mos" URI="deb http://<ip-of-fuel-server>::8080/liberty-8.0/ubuntu/x86_64 mos8.0 main restricted"
-
-   - "Auxiliary" URI="deb http://<ip-of-fuel-server>:8080/liberty-8.0/ubuntu/auxiliary auxiliary main restricted"
-
-   - Click <Save Settings> at the bottom to Save your changes
-
-Target specific configuration
------------------------------
-
-#. Set up targets for provisioning with non-default "Offloading Modes"
-
-   Some target nodes may require additional configuration after they are
-   PXE booted (bootstrapped); the most frequent changes are in defaults
-   for ethernet devices' "Offloading Modes" settings (e.g. some targets'
-   ethernet drivers may strip VLAN traffic by default).
-
-   If your target ethernet drivers have wrong "Offloading Modes" defaults,
-   in "Configure interfaces" page (described above), expand affected
-   interface's "Offloading Modes" and [un]check the relevant settings
-   (see figure below):
-
-   .. figure:: img/offloadingmodes.png
-
-#. Set up targets for "Verify Networks" with non-default "Offloading Modes"
-
-   **NOTE**: Check *Reference 15* for an updated and comprehensive list of
-   known issues and/or limitations, including "Offloading Modes" not being
-   applied during "Verify Networks" step.
-
-   Setting custom "Offloading Modes" in Fuel GUI will only apply those settings
-   during provisiong and **not** during "Verify Networks", so if your targets
-   need this change, you have to apply "Offloading Modes" settings by hand
-   to bootstrapped nodes.
-
-   **E.g.**: Our driver has "rx-vlan-filter" default "on" (expected "off") on
-   the Openstack interface(s) "eth1", preventing VLAN traffic from passing
-   during "Verify Networks".
-
-   - From Fuel master console identify target nodes admin IPs (see figure below):
-
-     .. code-block:: bash
-
-         $ fuel nodes
-
-     .. figure:: img/fuelconsole1.png
-
-   - SSH into each of the target nodes and disable "rx-vlan-filter" on the
-     affected physical interface(s) allocated for OpenStack traffic (eth1):
-
-     .. code-block:: bash
-
-         $ ssh root@10.20.0.6 ethtool -K eth1 rx-vlan-filter off
-
-   - Repeat the step above for all affected nodes/interfaces in the POD.
-
-Verify Networks
----------------
-
-It is important that the Verify Networks action is performed as it will verify
-that communicate works for the networks you have setup, as well as check that
-packages needed for a successful deployment can be fetched.
-
-#. From the FUEL UI in your Environment, Select the Networks Tab and select "Connectivity check" on the left pane (see figure below)
-
-   - Select <Verify Networks>
-
-   - Continue to fix your topology (physical switch, etc) until the "Verification Succeeded" and "Your network is configured correctly" message is shown
-
-   .. figure:: img/verifynet.png
-
-
-Deploy Your Environment
------------------------
-
-38. Deploy the environment.
-
-    - In the Fuel GUI, click on the "Dashboard" Tab.
-
-    - Click on <Deploy Changes> in the "Ready to Deploy?" section
-
-    - Examine any information notice that pops up and click <Deploy>
-
-    Wait for your deployment to complete, you can view the "Dashboard"
-    Tab to see the progress and status of your deployment.
-
-Installation health-check
-=========================
-
-#. Perform system health-check (see figure below)
-
-    - Click the "Health Check" tab inside your Environment in the FUEL Web UI
-
-    - Check <Select All> and Click <Run Tests>
-
-    - Allow tests to run and investigate results where appropriate
-
-    .. figure:: img/health.png
-
-References
-==========
-
-OPNFV
------
-
-1) `OPNFV Home Page <http://www.opnfv.org>`_
-
-2) `OPNFV documentation- and software downloads <https://www.opnfv.org/software/download>`_
-
-OpenStack
----------
-
-3) `OpenStack Liberty Release artifacts <http://www.openstack.org/software/liberty>`_
-
-4) `OpenStack documentation <http://docs.openstack.org>`_
-
-OpenDaylight
-------------
-
-5) `OpenDaylight artifacts <http://www.opendaylight.org/software/downloads>`_
-
-Fuel
-----
-6) `The Fuel OpenStack project <https://wiki.openstack.org/wiki/Fuel>`_
-
-7) `Fuel documentation overview <https://docs.fuel-infra.org/openstack/fuel/fuel-8.0/>`_
-
-8) `Fuel planning guide <https://docs.fuel-infra.org/openstack/fuel/fuel-8.0/mos-planning-guide.html>`_
-
-9) `Fuel quick start guide <https://docs.mirantis.com/openstack/fuel/fuel-8.0/quickstart-guide.html>`_
-
-10) `Fuel operations guide <https://docs.mirantis.com/openstack/fuel/fuel-8.0/operations.html>`_
-
-11) `Fuel Plugin Developers Guide <https://wiki.openstack.org/wiki/Fuel/Plugins>`_
-
-12) `Fuel OpenStack Hardware Compatibility List <https://www.mirantis.com/products/openstack-drivers-and-plugins/hardware-compatibility-list>`_
-
-Fuel in OPNFV
--------------
-
-13) `OPNFV Installation instruction for the Brahmaputra release of OPNFV when using Fuel as a deployment tool <http://artifacts.opnfv.org/fuel/brahmaputra/docs/installation-instruction.html>`_
-
-14) `OPNFV Build instruction for the Brahmaputra release of OPNFV when using Fuel as a deployment tool <http://artifacts.opnfv.org/fuel/brahmaputra/docs/build-instruction.html>`_
-
-15) `OPNFV Release Note for the Brahmaputra release of OPNFV when using Fuel as a deployment tool <http://artifacts.opnfv.org/fuel/brahmaputra/docs/release-notes.html>`_
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst
index 3387eacc3..bcfb6d5de 100644
--- a/docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst
+++ b/docs/installationprocedure/template-os-nosdn-nofeature-ha/installation.rst
@@ -2,11 +2,15 @@
 .. License. .. http://creativecommons.org/licenses/by/4.0 ..
 .. (c) Christopher Price (Ericsson AB) and others
 
-<template> software installation and deployment
+<scenario> software installation and deployment
 ===============================================
 
+.. Let's figure out how to structure this to highlight both virtual and
+.. bare metal deployments.  I need some help from the scenrio  owners to get
+.. that right.
+
 This section describes the installation of the OPNFV installation
-server (jumphost) as well as the deployment of the <template> OPNFV
+server (jumphost) as well as the deployment of the <scenario> OPNFV
 reference platform stack across a server cluster.
 
 Install jumphost
@@ -15,7 +19,7 @@ Install jumphost
 If you have not already done so, prepare your jumphost according the instructions in _#ref_Preparation
 this can be done using an ISO image with the following commands
 
-#. Mount the <template> ISO file/media as a boot device to the jump host server.
+#. Mount the <scenario> ISO file/media as a boot device to the jump host server.
 
 #. Reboot the jump host to establish the jumphost server.
 
diff --git a/docs/installationprocedure/template-os-nosdn-nofeature-ha/preparation.rst b/docs/installationprocedure/template-os-nosdn-nofeature-ha/preparation.rst
index c546a35f3..450c8bf5e 100644
--- a/docs/installationprocedure/template-os-nosdn-nofeature-ha/preparation.rst
+++ b/docs/installationprocedure/template-os-nosdn-nofeature-ha/preparation.rst
@@ -7,14 +7,14 @@ Preparation
 .. Not all of these options are relevant for all scenario's.  I advise following the
 .. instructions applicable to the deploy tool used in the scenario.
 
-Before starting the installation of the <template> scenario some preparation must
-be done.  You may choose to install the <template> scenario using an ISO image, or
+Before starting the installation of the <scenario> scenario some preparation must
+be done.  You may choose to install the <scenario> scenario using an ISO image, or
 executing the installation from a prepared jumphost.
 
 Preparing your jumphost to install by script
 --------------------------------------------
 
-To deploy the <template> scenario from a script you will need to prepare the jumphost
+To deploy the <scenario> scenario from a script you will need to prepare the jumphost
 with a compatible operating system.  Prepare your jumphost running CentOS 7 with libvirt
 running on it.  You may then install the RDO Release RPM:
 
@@ -27,13 +27,13 @@ the OpenVSwitch RPM from the RDO Project repositories and install it with the op
 Preparing your jumphost using an ISO image
 ------------------------------------------
 
-An alternative to preparing your own jumphost id to use a <template> ISO image as a boot image.
+An alternative to preparing your own jumphost id to use a <scenario> ISO image as a boot image.
 Download or build the ISO image according to the following instructions.
 
 Retrieving the ISO image
 ^^^^^^^^^^^^^^^^^^^^^^^^
 
-If you choose to install the <template> scenario from an ISO image you must first
+If you choose to install the <scenario> scenario from an ISO image you must first
 retrieve the <template-containing>.iso image of the Colorado release.  This can be
 found  can be found at <hyperlink required>.
 
@@ -41,12 +41,12 @@ Building the ISO image
 ^^^^^^^^^^^^^^^^^^^^^^
 
 Alternatively, you may choose to build the Fuel .iso from source by cloning the
-opnfv/fuel git repository.  To retrieve the repository for the Brahmaputra release use the following command:
+opnfv/fuel git repository.  To retrieve the repository for the Colorado release use the following command:
 
 $ git clone https://gerrit.opnfv.org/gerrit/fuel
 
-Check-out the Brahmaputra release tag to set the HEAD to the
-baseline required to replicate the Brahmaputra release:
+Check-out the Colorado release tag to set the HEAD to the
+baseline required to replicate the Colorado release:
 
 $ git checkout colorado.1.0
 
@@ -59,7 +59,7 @@ For more information on how to build, please see *Reference: 14*
 Booting from the ISO image
 ^^^^^^^^^^^^^^^^^^^^^^^^^^
 
-Mount the <template> ISO file/media as a boot device on the jump host server.  If all your hardware
+Mount the <scenario> ISO file/media as a boot device on the jump host server.  If all your hardware
 preparation is complete at this time you should reboot the jumphost to establish the deployment server.
 
 
-- 
2.16.6