From e9876bd337af54883fe46e49343abc22cfd0404f Mon Sep 17 00:00:00 2001 From: Morgan Richomme Date: Thu, 25 Aug 2016 18:00:55 +0200 Subject: [PATCH] configuration guide review JIRA: FUNCTEST-435 Change-Id: I5b18f1223a5892d084c761f174ac5f713ceed476 Signed-off-by: Morgan Richomme --- docs/configguide/configguide.rst | 58 ++++++++++++++++++++-------------------- docs/configguide/index.rst | 32 +++++++++++++--------- 2 files changed, 48 insertions(+), 42 deletions(-) diff --git a/docs/configguide/configguide.rst b/docs/configguide/configguide.rst index 6448d2c9..4d0d35b7 100644 --- a/docs/configguide/configguide.rst +++ b/docs/configguide/configguide.rst @@ -18,8 +18,10 @@ release installed in your environment. All available tagged images can be seen from location [FunctestDockerTags_]. For example, when running on the first official release of the OPNFV Colorado system platform, tag "colorado.1.0" is needed. Pulling other tags might cause some -problems while running the tests. If you need to specifically pull the -latest Functest docker image, then omit the tag argument:: +problems while running the tests. +Docker images pulled without a tag specifier bear the implicitly +assigned label "latest". If you need to specifically pull the latest +Functest docker image, then omit the tag argument:: docker pull opnfv/functest @@ -32,9 +34,6 @@ following docker command:: opnfv/functest brahmaputra.3.0 94b78faa94f7 4 weeks ago 874.9 MB hello-world latest 94df4f0ce8a4 7 weeks ago 967 B -Docker images pulled without a tag specifier bear the implicitly -assigned label "latest", as seen above. - The Functest docker container environment can -in principle- be also used with non-OPNFV official installers (e.g. 'devstack'), with the **disclaimer** that support for such environments is outside of the @@ -121,8 +120,9 @@ recommended parameters for invoking docker container under the path: '/home/opnfv/functest/conf/openstack.creds'. WARNING: If you are using the Joid installer, you must pass the - credentials using the **-v** option. See the section - `Accessing the Openstack credentials`_ above. + credentials using the **-v** option: + -v /var/lib/jenkins/admin-openrc:/home/opnfv/functest/conf/openstack.creds. + See the section `Accessing the Openstack credentials`_ above. #. Passing deployment scenario When running Functest against any of the supported OPNFV scenarios, @@ -133,7 +133,7 @@ recommended parameters for invoking docker container -e "DEPLOY_SCENARIO=os---" where: os = OpenStack (No other VIM choices currently available) - controller is one of ( nosdn | odl_l2 | odl_l3 | onos ) + controller is one of ( nosdn | odl_l2 | odl_l3 | onos | ocl) nfv_feature is one or more of ( ovs | kvm | sfc | bgpvpn | nofeature ) If several features are pertinent then use the underscore character '_' to separate each feature (e.g. ovs_kvm) @@ -143,7 +143,7 @@ recommended parameters for invoking docker container **NOTE:** Not all possible combinations of "DEPLOY_SCENARIO" are supported. The name passed in to the Functest Docker container must match the scenario used when the actual OPNFV platform was - deployed. + deployed. See release note to see the list of supported scenarios. Putting all above together, when using installer 'fuel' and an invented INSTALLER_IP of '10.20.0.2', the recommended command to create the @@ -243,19 +243,20 @@ illustration purposes:: Compass installer local development env usage Tips -------------------------------------------------- -In the compass-functest local test case check and development environment, in order -to get openstack service inside the functest container, some parameters should be -configured during container creation, which are hard to guess for freshman. This -section will provide the guideline, the parameters values are defaults here, which should -be adjusted according to the settings, the complete steps are given here so as -not to appear too abruptly. +In the compass-functest local test case check and development environment, +in order to get openstack service inside the functest container, some +parameters should be configured during container creation, which are +hard to guess for freshman. This section will provide the guideline, the +parameters values are defaults here, which should be adjusted according +to the settings, the complete steps are given here so as not to appear +too abruptly. 1, Pull Functest docker image from public dockerhub:: docker pull opnfv/functest: - here can be "brahmaputra.1.0", "colorado.1.0", etc. Tag omitted means the -latest docker image:: + here can be "brahmaputra.1.0", "colorado.1.0", etc. +Tag omitted means the latest docker image:: docker pull opnfv/functest @@ -273,8 +274,8 @@ To make a file used for the environment, such as 'functest-docker-env':: INSTALLER_IP=192.168.200.2 EXTERNAL_NETWORK=ext-net -Note: please adjust the content according to the environment, such as 'TENANT_ID' -maybe used for some special cases. +Note: please adjust the content according to the environment, such as +'TENANT_ID' maybe used for some special cases. Then to create the Functest docker:: @@ -283,8 +284,6 @@ Then to create the Functest docker:: --name \ opnfv/functest: /bin/bash -Note: it is recommended to be run on jumpserver. - 3, To attach Functest container Before trying to attach the Functest container, the status can be checked by:: @@ -345,6 +344,7 @@ follows:: | |-- __init__.py | |-- check_os.sh | |-- config_functest.yaml + | |-- generate_report.py | |-- exec_test.sh | |-- prepare_env.py | |-- run_tests.py @@ -374,12 +374,12 @@ follows:: | |-- results | `--userguide |-- testcases + | |-- __init__.py | |-- Controllers | |-- OpenStack - | |-- __init__.py | |-- features | |-- security_scan - | `-- vIMS + | `-- vnf `-- utils |-- __init__.py |-- functest_logger.py @@ -694,22 +694,22 @@ docker container. For example, try to use the **nc** command from inside the functest docker container:: - nc -v google.com 80 - Connection to google.com 80 port [tcp/http] succeeded! + nc -v opnfv.org 80 + Connection to opnfv.org 80 port [tcp/http] succeeded! - nc -v google.com 443 - Connection to google.com 443 port [tcp/https] succeeded! + nc -v opnfv.org 443 + Connection to opnfv.org 443 port [tcp/https] succeeded! Note: In a Jumphost node based on the CentOS family OS, the **nc** commands might not work. You can use the **curl** command instead. - curl http://www.google.com:80 + curl http://www.opnfv.org:80 - curl https://www.google.com:443 + curl https://www.opnfv.org:443