states/maas: rm Ubuntu boot entry on EFI systems

MaaS relies on IPMI to set boot order to PXE first; however
on systems with buggy firmware or without full IPMI support,
that fails, leading to booting Ubuntu from hard disk instead.

Work around this by clearing any previous Ubuntu boot entry
from board flash via `efibootmgr`.

Change-Id: I531d4bcb9f8d45740764f0dbab8fda49fbffac7e
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

salt-master: Increase command timeout to 15s

Change-Id: I85221e65823780063b127298264a0087b59ac8a4
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: ci/deploy.sh, states: bash debug, no err

Change-Id: Ie860aace8cab1a48dea7a567dc941cf80305d181
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: MaaS: commissioning/deployment retry

Change-Id: Ic4aa514e773d2963ad4a45b5be475e17b22885b4
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

Fix cmp reclass model: remove external_nic

Change-Id: I098fc04a6d87b163033618a18c58f7ae246c68d6
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: Rebase after authorized_keys fix upstream

Change-Id: Id53c2513b52d05a44dffda0fda40f8df259e226b
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: states: maas: Remove retries for salt.virt

salt.virt always returns a non-zero status due to pillar parsing
issues. Until we fix this, drop retries which cause an infinite loop.

Change-Id: I451e0d4d054a19ac912ac29e1c37f49fcd96c17d
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: states: maas: mcp.rsa.pub authorized key

Change-Id: Ifc1fafa0075d7032ee7d7e1e1d84759ab5baea76
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com:w
Signed-off-by: Guillermo Herrero <Guillermo.Herrero@enea.com>

p/fuel: Re-parametrize Openstack public net

Instead of passing public net via local_env, deduce its range
based on compute external IPs.

Change-Id: Ib736921c1d0f4002ea33677e7d794fd3e22001ba
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: Rebase: openstack_ha upstream sync

Change-Id: I87a2259ddcbc3ab69cde7a3f3e78a79dc907a5d9
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: states: maas: Retry linux state on VCP VMs

Change-Id: I9577383b743730cc821eb68a1f159b426b29f6b4
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

baremetal: HA: Standalone openstack_ha state

TODO:
- re-check states;
- investigate tenant telemetry support;
- re-check prx node config;

Change-Id: Iff53537b9e78696dd16c2339996f2bd3771074aa
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

reclass: baremetal: openstack: Fix eth assignment

Change-Id: I3a4ce93f36c5a01481601a1f38b562c7ca0a6650
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

salt: virt: seedng: Add AArch64 support

Change-Id: I8642701586296ae171d702bb4b6ad0f9bef36c9e
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: Upstream: MaaS: break infinite loops

Change-Id: I4acde80c82de4b53b15157a096911296a55997fe
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

salt: virt: Extend libvirt_domain

Extend salt virt modelling capabilities with support for:
- hw_firmware_type;
- virt_machine_model;
- cpu_model;

This requires extending/patching:
- libvirt_domain.jinja template (part of salt package, handled via
  armband.libvirt_domain_template new state);
- _modules/virtng.py custom module;
- salt/control/virt.sls;

The new support is leveraged via our reclass model with AArch64
specific values.

Change-Id: I34bdb235cb7765ecdde365761dbd2c942f699039
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: Use "libvirt" unix_sock_group

Change-Id: I75819b90751ce3189c360f1d1478670c07b64144
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

maas: Refactor boot resources infinite loops

Change-Id: I4c1322e2ddd96ec5a1f4b11ece60b635f7e043c5
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: Rebase for MaaS dynamic fabric support

Change-Id: Ia5bab57d6081790ac431eab9c9b5abfb2b9cd853
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: Rebase after MaaS API port added upstream

Change-Id: I1371d3a0ee2aeb0a620a1c087ec34990accaae16
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: Rebase after salt control image update

Change-Id: I362ae48d576b14c87188e88599e0a0542028dcb2
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

salt.sh: Add "arm64" to bootstrap arch condition

Upstream commit [1] broke Salt bootstrap on AArch64, by
introducing an architecture condition that is too strict to allow
Debian package installation (even if we provide our own repo).

Add "arm64" to the list of supported architectures. This needs
to be done on the fly, as the bootstrap script is fetched using
`curl` from <salt-master-setup.sh>, which is also fetched
dynamically using `svn export`.

[1] https://github.com/saltstack/salt-bootstrap/commit/caa6d7d

Change-Id: I2ff5d56e4d3072a1afe31ab0a400b0b83e2b34a8
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

ci/deploy.sh: Fix opt parse for local_env sourcing

Previously, we only accounted for the arguments we were interested in
(l:lab, p:pod), which failed in case other (valid) arguments were
passed first.

Accept all arguments Fuel's <ci/deploy.sh> accepts, so lab/pod are
read no matter where they are placed in the command string.

Change-Id: I9125a5e70d19b7e1ca905b2572f3c8ceda13025b
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

Baremetal support for MCP on AArch64

NOTE: Armband moves MaaS IPs to x.y.z.2 (from x.y.z.3) due to address
overlap with IPMI static IPs residing in the same range.

Change-Id: I2fc9539afe921d2704e7f5ff615ccd86d0914b7b
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: Rebase after lib.sh VGA patch got upstream

Change-Id: Ibf6f633873e7dce9c38f6952710b7937b1290ac3
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: Fix eth name for enp2s0 (was enp2s2)

Previous rebase introduced a regression in VM eth naming on AArch64.
enp2s2 should have been enp2s0, so fix that up.

Change-Id: If831dffce472750516dfa6b69cdc3a7952a3427d
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: Rebase after non-root deploys got upstream

While at it, refresh "AArch64 virtio NIC names sync" to include
changes for ODL-L3 scenario recently added in Fuel@OPNFV.

Change-Id: Ic221b330d9968204b7d4da16a26454b2cf8b88eb
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: ci/deploy.sh: Fix vgabios missing link

Creating vgabios's missing link in /usr/share/qemu requires sudo.

Change-Id: I34dbd55facbccf361d94fa8341e99b76d5bf6276
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: ci/deploy.sh: Fix deploy without sudo

Previous rebase left out the "sudo" invocation for apt-get/yum calls.

Change-Id: I97c9785dae88afae6c1aa8a2faf2e5a10f9451a6
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: Rebase, drop upstream clone

Now that Fuel@OPNFV supports submodule patching again, bring back
`make fuel-patches-import`.

Change-Id: Ic6f9870d94b6d302f1ebcdc21d54a83f62910af9
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: armband formula: Fixup security_driver

Previous changes set security_driver to none (without quotes),
which conflicts with libvirt 3.x.
Fix it by adding required quotes.

Change-Id: I699da4c9cb5d77fe6e959e476d3279f3d679edc6
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: Rebase after Fuel@OPNFV salt repo pinning

Change-Id: Iba6bc9f6588a9ad528de70a0f3bd200a5fe1ab1a
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: mcp: salt-formulas: ODL: AArch64 leveldb

Install <armband-odl-leveldb-fix> as part of the existing Opendaylight
salt-formula (and not as part of Armband's separate salt-formula, like
previous fixups); only applicable for AArch64.

JIRA: https://jira.opnfv.org/browse/ARMBAND-283

Change-Id: I9df5919e98c3a826ab5d3fddb43dc85c12968bd0
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: reclass: opendaylight: Use UCA repos

Current opendaylight pillar enforces a full apt repository cleanup,
removing Ubuntu Cloud Archive (UCA) repos in favor of adding
pre-hardcoded Ubuntu archive repos.

Mitigate this by ommiting "system.linux.system.repo.ubuntu" from the
opendaylight pillar, leaving the default UCA repos in place.

Change-Id: Ia2511e8028c8e28ec505c9a35b5dd2e76f4bcd0a
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: network: public: Use arm-virtual2 POD cfg

FIXME: This should be converted into a dynamic configuration read
from the universal POD descriptor in securedlab, once that is ready.

Until then, just align the public network configuration used by the
virtual POD with the Enea lab configuration specific to arm-virtual2
(i.e. public network on 10.0.9.0/24).

NOTE: Replace the gateway at 10.16.0.1 (now 10.0.9.1) with the same
IP address as our lab's gateway (10.0.9.254), to keep both possible
network layouts in sync (using all virtual networks created via
virsh, respectively our lab's static config).
This will ensure deploys continue to work in both enviroments.

Also, since our gateway resides at 10.0.9.254, trim the DHCP pool
range for the public network to not include that address.

To pass bridge information from CI, Fuel@OPNFV deploy scripts need
some small adjustments as well.

While at it, rebase our patches on top of latest Fuel@OPNFV changes.

Change-Id: I92f01dd819ebf41b1da68d3b934fb10a23257e33
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: salt-formulas: Enable Armband formula

FIXME: Re-enable apparmor.
FIXME: Detect baremetal and re-enable acceleration.

Based on old Armband Fuel patches:
- install qemu-efi;
- install vgabios;
- disable apparmor as security driver for libvirt (temporary);
- fix missing link for vgabios binary blob;
- nova: virt_type=qemu (temporary, until we support baremetal too);
- nova: pointer_model=ps2mouse since AArch64 has no USB tablet;
- nova: cpu_model=cortex-a57;
- nova: libvirt driver: Add ttyAMA0 by default on AArch64;
- nova: libvirt driver: Use VGA video type by default on AArch64;

Change-Id: I6aa87ac8d1c2f9fe3919b80fd29ab84ccfaa7c38
Signed-off-by: Guillermo Herrero <Guillermo.Herrero@enea.com>
Signed-off-by: Charalampos Kominos <Charalampos.Kominos@enea.com>
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: virtio: min libvirt 3.x and Qemu 2.6

Expect host virtualization tools (libvirt, qemu) to be recent enough
to support modern virtio-net-pci out of box as a default.

This allows us to drop some changes and a hack - see [1]:
- "model=virtio" implies "model=virtio-net-pci" on libvirt 3.x;
- "model=virtio" puts each NIC on a seperate bus, all work now;
- modern virtio is automatically used when NIC is on PCIe bus;

Revert "p/fuel: lib.sh: Revert to virtio-mmio for PXE net"

This reverts commit 4f72e6be436badd2ded546424ec4a304cd6ce5d3.

[1] https://lists.gnu.org/archive/html/qemu-devel/2017-07/msg07594.html

Change-Id: Iaa7af63846c9d9dca5b7a9be5efa54f8cd56242e
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: lib.sh: Use host-passthrough CPU model

Fix libvirt 3.x compatibility issues by explicitly setting the CPU
model to host-passthrough via virt-install.

Change-Id: I0e52cbabb0bf42b36dd2b9b5045dc18878e21884
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

Revert "p/fuel: network: public: Use arm-virtual2 POD cfg"

This reverts commit 779c0cc56646da234019577e17f4af378a205e08.

Change-Id: Ia5261da363579e7bec442ada58ca16635025f872

p/fuel: network: public: Use arm-virtual2 POD cfg

FIXME: This should be converted into a dynamic configuration read
from the universal POD descriptor in securedlab, once that is ready.

Until then, just align the public network configuration used by the
virtual POD with the Enea lab configuration specific to arm-virtual2
(i.e. public network on 10.0.9.0/24).

NOTE: Instead of replacing the gateway 10.16.0.1 (now 10.0.9.1) with
our lab's gateway (10.0.9.254), keep it as an extra hop, in order not
to break deploys in different enviroments.

Also, since our gateway resides at 10.0.9.254, trim the DHCP pool
range for the public network to not include that address.

Change-Id: If45ca3140f770f758f0d02c1049084f67f83264e
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: Rebase after --noautoconsole got upstream

Change-Id: I99b6052a26169888c137f874889872107c7df931
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

ci/deploy.sh: Do not pass SSH_KEY to Fuel deploy

OPNFV Jenkins jobs for Fuel and Armband define the variable SSH_KEY,
which gets passed down to Fuel's ci/deploy.sh, leading to a conflict
between the original key and the destination key paths, which in
the default case overlap, leading to a deploy-breaking fault.

Fuel@OPNFV is not affected by this behavior due to a "sudo" call
that does not pass down enviroment variables (i.e. without `-E`).

Change-Id: I291966ee177d828bf1e59c213c9da40eae13ab6b
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: deploy: Allow non-root deploys

Fuel@OPNFV's ci/deploy.sh script imposes a hard requirement on
running as the root user, which can be refactored into a series of
smaller requirements.

Instead, relax the check to the ability to run sudo commands
inside the script, and explicitly add sudo for the package
installation commands.

This also adds a requirement for the Jenkins user running the
deploy to be part of the "kvm" and "libvirtd" groups, so
libvirt/virsh can manage VMs on the jump server / Jenkins slave.

See related change in OPNFV Releng repository [1].

[1] https://gerrit.opnfv.org/gerrit/#/c/37655

Change-Id: I29b90d285c99f85462493c2a3890264365fca9f0
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: lib.sh: Revert to virtio-mmio for PXE net

virtio-pci-net seems to have issues with more than three (3)
interfaces attached to the same guest, even on separate PCI buses.

To bypass this limitation, for now, we will use virtio-mmio for
PXE, and virtio-pci-net for the rest.

This keeps the guest eth order consistent and predictable, and
allows udev to assign predictable interface names for 3 out of 4
guest network interfaces (enp2sX), thus ensuring PXE will always
get the "eth0" designator.

Change-Id: I0d0cb8148cd87313e67f8f27793eb2414c1e90e3
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

reclass: system: AArch64: Remove mcelog

Change-Id: I7cc5162359347ac9472127a8d27730c96050915e
Signed-off-by: Guillermo Herrero <Guillermo.Herrero@enea.com>
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: Rebase after upstream vCPU count rework

Change-Id: Ic4066acc2716e5f3f497fba9799691e0258d3011
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

p/fuel: Rebase, drop --depth=1 when cloning Fuel

`git clone --depth=1` does not preserve git history, so 3-way merge
is not possible.

There are 2 ways to fix this:
- (recurrent) rebase patches by adjusting patch context;
- (one-time, with a recurrent very small performance hit) preserve git
  history when cloning Fuel@OPNFV in salt.sh;

So, let's drop "--depth=1" and ensure `git am -3` will continue to work
on future patch context changes (where possbile).
While we're at it, also rebase our current patches.

Change-Id: Iacfb4daf90a170174405410ff9c988c4fcac79ca
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

MCP: patches: AArch64: Add initial support

- p/fuel: classes: AArch64: virtio-pci-net sync
- p/reclass-system-salt-model: Add Armband repos

- mcp/config: AArch64: Use UEFI arm64 image
  Also, allow removal of VMs booted via guest UEFI (OVMF or AAVMF).
  While at it, bump default vCPU number from 2 to 6.

- lib.sh: AArch64: Use VGA video mode for guests
  On AArch64, there is no Cirrus video, so use VGA mode instead.
  For now, we install vgabios package no matter the arch, although
  it is only used on AArch64.
  On Debian systems, also fix a missing link for vgabios-stdvga.bin.
  Based on previous Armband work from [1].

- lib.sh: AArch64: virt-install: Use virtio-net-pci
  AArch64 virt tools (i.e. libvirt) default to "virtio-mmio", instead of
  "virtio-net-pci", at least before libvirt 3.x (see [2]).
  Without PCI bus info, we can't really enforce a specific order for
  the guest ethernet devices.
  Moreover, predictable network interface naming is out of the question
  with virtio-mmio, as there is no bus information to rely on.
  Therefore we will enforce "virtio-net-pci" on AArch64, instead of
  the default "virtio" (which translates into "virtio-mmio" currently).

- salt.sh, user-data: Add Saltstack arm64 repo

- salt.sh: Clone armband repo, apply patches from it

- classes: virtual: AArch64: virtio-pci-net sync
  Since AArch64 will be using virtio-net-pci NIC model for guests,
  predictable interface naming yields a slightly different scheme.
  Update all configuration to reflect this.

FIXME:
- Use https for fetching Armband GPG keys!
- Revise the patching mechanism, make things more dynamic.

[1] https://github.com/opnfv/armband/blob/danube.2.0/patches/fuel-library/
    arm64-bug-fixes/0002-Install-vgabios-and-link-for-aarch64.patch
[2] https://www.redhat.com/archives/libvir-list/2016-August/msg00931.html

Change-Id: If5aae22066f75732652201a78357c4931438d58d
Signed-off-by: Guillermo Herrero <Guillermo.Herrero@enea.com>
Signed-off-by: Charalampos Kominos <Charalampos.Kominos@enea.com>
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

MCP: Obsolete `fuel-patches-*` functionality

We no longer require patching submodules in the Fuel@OPNFV
submodule, so remove all obsolete code.

Change-Id: I872ac7da2cd020b6882f8bc8304c03a8e528313f
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

MCP: Remove all Fuel patches and plugins

Chances are none of the old patches / plugins can be reused as-is,
so remove all of them and prepare for the switch to MCP.

Change-Id: I999927a43b438d9bda9ff118731e2af4b1fa8caa
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

docs: Update release date

Change-Id: I659946aef133af3b99120903d57527daccf67f53
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

Update armband documentation for 3.0 release

Change-Id: I2a71637b67b91cf828bbcf5f6abfbd9c2d6da2eb
Signed-off-by: Cristina Pauna <cristina.pauna@enea.com>

fuel-main: Backport ntpd autostart enablement

Upstream-bug: https://bugs.launchpad.net/fuel/+bug/1688631

Change-Id: I7bc2dac4442c1b02b21fef82a9b9c008f4dab9ac
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

Fuel-OSTF: Arch dependent Cirros ssh password

For arm64 "gocubsgo" will be used
For x86 it will use "cubswin:)"

JIRA: ARMBAND-250

Change-Id: Id580168cee1dd7c52876f2781b7cbbf733169ef3
Signed-off-by: Alexandru Nemes <alexandru.nemes@enea.com>

Merge "nailgun: Add NIC vendorid and device id for Cavium NIC"

nailgun: Add NIC vendorid and device id for Cavium NIC

Added Cavium NIC to the list of DPDK supported NICs so that fuel will
enable the DPDK checkbox.

Change-Id: If05539ece8c97a70bffaa94ea6629b7d2c568905
Signed-off-by: Andrei Varvara <andrei.varvara@enea.com>

docs: Update reference for Danube 2.0

Change-Id: Id958da0d8b951b240812bdf794ecf0be79091af6
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

Read or add default mtu values for each interface

Change-Id: If3cbd4eee8121b697d2ab0603939b9a4aa188230
Signed-off-by: Catalina Focsa <catalina.focsa@enea.com>

Cleanup: Remove patches that landed upstream

Change-Id: Ib2f96ec70d0b589741484f7e3f3b537a269785fe
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

fuel, docs: fuel-menu: Align defaults with OPNFV

Since Armband alters the bootstrap package list and/or kernel version,
hanlded previously by fuel_bootstrap_cli.yaml, we need to refactor our
patches a bit.

NOTE: deploy-cache: We no longer include bootstrap package list in the
bootstrap fingerprint; we only rely on the repo mirrors fingerprints,
since bootstrap package list is mostly static across release cycles.

Upstream-bug: https://bugs.launchpad.net/fuel/+bug/1679636

JIRA: FUEL-266
JIRA: ARMBAND-225

Change-Id: I6c1b090df6eff69d60fa7ca779b3dde527e77879
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

cleanup: Fuel: docker: remove obsolete ffi patch

This patch is no longer needed, since upstream package repos have
fixed meanwhile.

Change-Id: Ic73d7e60cce6a1a0c152885caeb30f49d68e7441
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

Update Host OS NTP Servers to pool.ntp.org

Change-Id: If13c2448ca89f3a016e604c8cc1bf36813b7d90d
Signed-off-by: Catalina Focsa <catalina.focsa@enea.com>

Merge "docs: Experimental features note about ceilometer"

docs: Experimental features note about ceilometer

Starting with Danube.1.0, Ceilometer and MongoDB are experimental
in upstream Fuel@Openstack, so the appropiate feature group needs
to be enabled during master node installation to use them.

Change-Id: Ib522c7e81cc73625128296873b4f9eef7cf1e99d
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

docs: cleanup: amend kernel section

Change-Id: I4a0a062d2ea8157bb16b724b09acda8724f29960
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

docs: Refresh Makefile related instructions

While at it, add instructions for selecting the custom kernel
from Armband DEB repos.

JIRA: ARMBAND-243

Change-Id: Ie8828241dc3a83d7268dfbd3526303dc674aef10
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

Remove BGPVPN plugin from docs

Update the docs to reflect that BGPVPN is not
participating to the D1 release

Change-Id: I67600370c63373b4efc1020e03977a83d3833857
Signed-off-by: Cristina Pauna <cristina.pauna@enea.com>

Minor corrections and updates to docs

Change-Id: I22ae7de7f13b6347b164c318a93aae4fa2209271
Signed-off-by: Cristina Pauna <cristina.pauna@enea.com>

Merge "Update armband documentation for Danube"

FIXME: f-l: compute.pp: Temp disable apparmor

Apparmor profiles need to be refreshed for Armband specific
version of libvirt/qemu/etc.; until updated profiles land,
disable libvirt qemu security driver.

JIRA: ARMBAND-235

Change-Id: I65d8bbb00e390d34c0c36fef37666e70d06fd31a
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

bootstrap, dea_base, nailgun: Pin 4.8.0-9944 krn

New kernel includes:
- ABI bump;
- GICv3-ITS live migration support;

TODO: build meta package so we don't have to bump it manually.

JIRA: ARMBAND-171

Change-Id: I4aaa5ca496e535abed948d2e51a6caf7e03393a8
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

deploy-cache: Use `mco` to set up authorized_keys

JIRA: ARMBAND-242

Change-Id: I1e8335289a253f5fa2ebb4fb2620b25f10e1b1e9
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

f-l: Refresh after upstream reverted cobbler rm

Remove our revert patches since upstream applied the same changes.
Update patch context where needed.

JIRA: ARMBAND-237

Change-Id: I6007484ad23f0fceabd8f8ec7625e598aee280c7
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

f-l: Temporary: Revert upstream patches

In order for our patches to still apply, revert latest changes from
upstream Fuel@Openstack.

Change-Id: Icca323a71669b413d9777df889b2e2b8b884e261
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

bootstrap, dea_base, nailgun: Pin 4.8.0-43 kernel

Since newer kernels have issues with AAVMF + vhost_net,
we need to also temporarily blacklist vhost_net.

NOTE: This change also adds linux-image-extra packages to both x86_64
      and AArch64 target image(s).

TODO: Remove vhost_net blacklist (later).

JIRA: ARMBAND-161
JIRA: ARMBAND-171
JIRA: ARMBAND-227
JIRA: ARMBAND-230
JIRA: ARMBAND-239
JIRA: ARMBAND-244

Change-Id: I456f4235d04375905df9d6f776b84f2e0eee22d6
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

Update armband documentation for Danube

JIRA: ARMBAND-243

Change-Id: If44f1a9f820793c9b04610fd4db7c05a6675f065
Signed-off-by: Cristina Pauna <cristina.pauna@enea.com>

f-a: bootstrap: /etc/rc.local: force mco start

Temporary workaround for upstream bug:
"Mcollective fails to start in bootstrap of baremetal servers" [1]

This should be reverted as soon as upstream merges a fix.

While at it, add some missing license headers to patches.

[1] https://bugs.launchpad.net/fuel/newton/+bug/1656150

Change-Id: I6d03819bd2df5b8fd9451faedcfd2783847838fa
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

network-check: Typo fix for unknown eth state

Change-Id: If6f9cd6a78e712f53e69b9bbc31002983c7162b1
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

fuel-library: Revert cobbler removal

While at it, remove unrelated patch that was merged upstream.

JIRA: ARMBAND-237

Change-Id: I01889d100e2f8adab34a60389e602d7d48f5b973
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

Merge "docs: Copy OPNFV docs dir as documentation base"

docs: Copy OPNFV docs dir as documentation base

Copy the files from fuel as base documentation. A subsequent commit
will adapt it with aarch64 specifics.

JIRA: ARMBAND-243

Change-Id: I085d3cfab3a65d8ab7954dcdc876f2b922889ee2
Signed-off-by: Cristina Pauna <cristina.pauna@enea.com>

Merge "Add copyright header to patch files"

Merge "deploy-cache: Master id_rsa.pub as authkey for env"

Merge "Revert "docs: Release Notes: Add Label""

deploy-cache: Master id_rsa.pub as authkey for env

JIRA: ARMBAND-242

Change-Id: Ice1091ce701139995418c5899181b09b630c41a9
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

Add copyright header to patch files

JIRA: ARMBAND-236

Change-Id: I91c4956b5baa479995bff2f569a321b8a0b421c0
Signed-off-by: Catalina Focsa <catalina.focsa@enea.com>

f-l: Backport: Increase reboot task timeout

Temporarily fix deploys until this patch gets merged upstream.

Change-Id: I6004fc5d6d178a0405ee7a9819264bad317578e7
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

f-l: build_image: Extract cluster_arch from / URI

JIRA: ARMBAND-240

Change-Id: If5e7ceb67b6597a2791b352596e52dd63bf32eab
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

Makefile: patches-import: Explicit patch format

While at it, add a sample license header, checking whether patch
license addition won't break build/deploy procedures.

JIRA: ARMBAND-236

Change-Id: Ica2792b606051b8bdd23832fec48925e238325a2
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

Revert "docs: Release Notes: Add Label"

This reverts commit 1509022c3c290dc799af12fa405f704f16203fc7.

Change-Id: Ia68d13194ed6e68577093c795722a187f7382683

OPNFV bootstrap: Pin kernel to 4.4.0-45

Newer kernels have link training issues on ThunderX boards.
Since all other AArch64 boards work fine with this version,
make it the default.

JIRA: ARMBAND-239

Change-Id: I9d51591547a645dc9ea91088e6033435f6fb71fe
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

Merge "fuel-plugin-odl: Fix deploy on x64 due to leveldb"

docs: Adding Labels

Labels serve as anchors/ refs when referenced from other documents
This patch adds labels to docs/*/*/index.rst

Change-Id: I3210dc1a21d9f523075db58c0976b913f2e49d81
Signed-off-by: ShubhamRathi <shubhamiiitbackup@gmail.com>

docs: Release Notes: Add Label

Label added to Release Notes.
This label shall function as an anchor to Release Notes
when referencing from OPNFVDocs composite document.

Change-Id: Icf80a73a85b0e510b27c57139dd697893e8a6e4d
Signed-off-by: ShubhamRathi <shubhamiiitbackup@gmail.com>

fuel-plugin-odl: Fix deploy on x64 due to leveldb

leveldbjni class is used to patch odl for aarch64
When run on x64, the class is not declared (it is filtered out).
Nevertheless, the puppet dependecy required the now undeclared class.

Fix consists in always using leveldbjni class, but on x64 it does
nothing. The architecture dependent logic is thus contained in leveldbjni.

JIRA: ARMBAND-229

Change-Id: If61f4fe3dcca0b2cff38ffcfc2321ed4b43bc2b4
Signed-off-by: Dan Andresan <dan.andresan@enea.com>

patch-packages: Disabled upstream in Fuel@OPNFV

Drop obsolete patch after Fuel@OPNFV disabled patch-packages.

JIRA: ARMBAND-200

Change-Id: I3a96f34bc8bdc180a1ab18ce89b230c36fe272ef
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

fuel-web: Fixup AAVMF props patch context

Sync patch context after upstream changes.

Change-Id: Id179543f0f3732f6609b66527a617e08135d7aef
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

fuel-plugin-odl: install_quagga: Parallel build

Change-Id: I6b0de1cb7bff9d79d804795c428fe7d5ca2a070a
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

fuel-nailgun-agent: Fixup SR-IOV filtering patch

Our previous SR-IOV filtering adjustment in fuel-nailgun-agent
broke detection for real SR-IOV capable interfaces, omitting
them from the inteface list.

For ThunderX systems, where interfaces are VFs, the "physfn"
dir exists, but has no "physfn/net" subdir.

Change-Id: Iaea937f360f81ac59212b8c380fecf72e9985844
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

Migrate docs to the new Danube dir structure

Change-Id: I6f15bcf5ea66fbdd1c3e4621e7f339dafcea9a7e
Signed-off-by: Cristina Pauna <cristina.pauna@enea.com>