Synchronize down all of the dynamic modules

Sync all of the salt dynamic modules to make sure custom
modules, states, grains & etc. are on the target nodes.

Change-Id: I04f2ac0465d5381c4c07623e9383619d9b9731de
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Switch distrib revision to testing

In order to avoid bleeding edge issues with nightly version of
salt formulas, switch to "safe" testing repo source.

Change-Id: I9d12f337c3952711cb8843943c23315795064016
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Merge "ci/deploy.sh: Allow non-root deploys"

Merge "Set ntp servers list"

Merge "reclass: opendaylight: Use UCA default repos"

Merge "mcp/config: Move scenario defs to separate dir"

Set ntp servers list

* set ntp sweden servers list for virtuals
* wrap common cluster init options

Change-Id: I044802998d5498fed969e62bf1ea8c814652f34f
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

[odl-router] Bring up public network on computes

* apply provider mappings on compute nodes as well
* set default route of computes to gateway node

Change-Id: I5715e34fd8ecbed87bd7f1b1ed488766af711bae
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

mcp/config: Move scenario defs to separate dir

Prepare for adding baremetal scenarios by moving existing scenario
definitions (intended for deploys on virtual PODs) to their own
subdirectory.

Change-Id: Iaa75e0b0a9876e4f263fc6bbae796d97848ef99b
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

ci/deploy.sh: Allow non-root deploys

Currently, deploying Fuel@OPNFV requires the `ci/deploy.sh` to be ran
as root user, for:
- hypervisor access (virsh);
- installing prerequisite packages;

We can support non-root deploys if we relax above restriction into:
- current user should have hypervisor access beforehand
  (new check added);
- current user has passwordless sudo rights, for installing packages;

Later, we should move the package installation out of the deploy
script (`ci/deploy.sh`), making the whole deploy possible without
sudo, only hypervisor access.

After this change, the old way (sudo ci/deploy.sh) should work just
like it used to before, so no regression/behavior change should be
introduced with this.

Change-Id: Ib2ea96aa7b6d67ba0606318407a8adeb51e6969d
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

reclass: opendaylight: Use UCA default repos

Current opendaylight pillar enforces a full apt repository cleanup,
removing Ubuntu Cloud Archive (UCA) repos in favor of adding
pre-hardcoded Ubuntu archive repos.

Unlike UCA, main Ubuntu archive is split based on target arch, the
main archive.ubuntu.com holding only x86 packages, while the other
archs are hosted on ports.ubuntu.com.

This leads to adding (only) x86-specific repositories to our AArch64
UCA image.

Mitigate this by ommiting "system.linux.system.repo.ubuntu" from the
opendaylight pillar, leaving the default UCA repos in place.

Change-Id: Ia7033bcb544d8752d5557bbabc92c92c5008b00c
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

ci/deploy.sh: Fix "notify" on dumb terminals

Dumb terminals (which do not support colors), like "vt220",
make `tput setaf` return with an error code, hence bypassing the
actual print.

Change-Id: Id838583beb30a810aec478ed80d452c6f3203e0f
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

salt.sh: Drop upstream clone in favor of local git

salt.sh currently clones the full Fuel@OPNFV git repo from upstream
public mirror, preventing us from testing locally edited or new
patches.

Instead, bring back git submodule handling from old f_repos, clone
and patch each submodule locally, then copy the whole parent repo
over to cfg01.

This is also a first step towards implementing offline deploy support.

NOTE: This adds new deploy prerequisite packages:
- git (for submodule clone/update);
- make (for submodule patching);
- rsync (for parent repo replication to cfg01);

NOTE: Parent repository is expected to be a git repo, in order to
work with git submodules.

While at it, perform some minor related changes:
- add deploy artifacts (ISOs, qcow2 files) to .gitignore, also used
  to filter-out such files during rsync to cfg01;
- remove obsolete Fuel patches (old f_repos mechanism);
- rename "reclass-system-salt-model" submodule;

Change-Id: I6210d80d41010b2802e4f1b31acf249a18db7963
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

mcp/scripts: shellcheck cleanup

Change-Id: I280d540b461341e14de654186016248eba4d3521
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

ci/deploy.sh: MCP cleanup, sanity checks

- disable false-positive shellcheck errors;
- fix obsolete backtick usage;
- move obsolete arguments to separate section;
- add color-enabled "notify" macro for warn/err messages;
- remove obsolete code intended for old Fuel;
- fix quoting and double-quoting shellcheck warnings;
- minor code changes for better readability;
- remove "no healthcheck" flag (obsolete);
- add mandantory arguments validation;

Change-Id: I991836adc8d76466f2b83b1e472bb9ef6989fff3
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

ci/deploy.sh: Rework bridge arguments for MCP

Change-Id: I20d6dedeaa31f7986eaa35be49c5388c3fdb4b83
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

lib.sh: Use host-passthrough when spawning VMs

virsh defaults to using "host-model" instead of "host-passthrough",
which not only might lead to a small performance hit on x86, it is
also causing compatibility issues with libvirt 3.x.

Address this by explicitly requesting "host-passthrough" as the
CPU model for virt-install.

Change-Id: Ia7c5e8ff906c02fed2193c268cbb3594c5607bc6
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

[odl-router] Add missing nodes config

Change-Id: Id7603aa581e4ccdddad1cf93f9434fe95c047800
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Set key owner to original user in case of sudo

Change-Id: If964d36ad4f0cb6f1b2caf8544d4e35487f59c6c
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Bring in opendaylight L3/router scenario

Change-Id: I8a3be1764de136e2ecf81f964233483be5d6655a
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

mcp/user-data: Pin saltstack repo to 2016.11

Latest saltstack repository recently pushed a new version of
"salt-api" which breaks compatibility with current Fuel@OPNFV code.

For now, let's pin saltstack repo to the most recent stable version.

Change-Id: I2a7e11d4fb50a8c62220f3f29ded5955fa69aef0
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

lib.sh: cleanup_vms: Also remove VMs that use UEFI

Pass `--nvram` to `virsh undefine`, so guest VMs booted using
UEFI (OVMF on x86 or AAVMF on AArch64) can be destroyed.
This does not affect VMs without UEFI.

While at it, fix logical error in previous commit adding support
for cleaning up stopped VMs.

Change-Id: I44c20566469f29a8683d81e3641c69da572ccd4e
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

lib.sh: cleanup_vms: Also remove stopped MCP VMs

In case the cfg01 & co. VMs are in "shut off" state, `virsh --name`
will ommit them, which leads to `cleanup_vms` leaving behind stale
VMs. Add `--all` arg to list all VMs, including stopped ones.

Change-Id: Ia550a10eb0b40138f87ade709336c2871a8b1cd8
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

[bugfix]invalid user ‘jenkins’

See https://build.opnfv.org/ci/job/fuel-deploy-zte-pod1-daily-master/456/console
In lib.sh, generate_ssh_key() assumes that "jenkins" is
the current user name. But on zte-pod1, the ci user name
isn't jenkins. It is better to use $USER replaced "jenkins".

JIRA:FUEL-273

Change-Id: I6ec6847eccd055b8b4062dd202f8f0a24ba6dd73
Signed-off-by: zhihui wu <wu.zhihui1@zte.com.cn>

Merge "mcp: openstack: Install & configure horizon"

mcp: openstack: Install & configure horizon

Change-Id: I2f6b136efebfee95a9a192c40afb88d20bbacef0
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

mcp: lib.sh: virt-install --noautoconsole

When X server is available, virt-install tries opening virt-viewer
automatically (for each newly created VM), which blocks the
deployment until the user closes the virt-viewer window.

Without X, virt-install just throws a warning and moves on.

Fix both of the above by passing the "--noautoconsole" argument to
virt-install.

Change-Id: I7df839aa902f7629dec11d24905fc05d1070f9db
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

Tune network sysctl options

* tune net/tcp opts
* handle vcpus setting for vms
* fix tempest issue with public subnets visible
* set reclass data source to local to avoid git clone

Change-Id: Ibac9eba8234ebb20854c03b399405968cb2069e8
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Apply reclass patches before salt master init

Change-Id: I7bb984880e98b7bdec9aa0b3895a3be9fd75cac0
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Apply upstream patches

For opendaylight support:
  * neutron formula
  * reclass system model

Plus missing apply of haproxy state.

Change-Id: Ic9e3672b51d5331656d636c44c3f891e49437e23
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Set public endpoints to external interface

In order to pass functest/api_check, configure public endpoints of
openstack core services with external ip address.

Change-Id: I519865df5700acbcf542ea71efd87780e9f1d9d5
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Align reclass cluster model of dpdk scenario

Change-Id: I4fc0c0e040c97e91c79aae2f0142fb6f025081f2
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Enable cinder volume service

Change-Id: I29ad8fc0e504779184fdf3795dc82ce1b031dbf8
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Turn on opendaylight scenario

* fix formula & reclass cluster model
* bring in running states

Change-Id: I8e66e69045f5c745f9aa6f59f7ce6d66b5bf1c95
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Rewrite infra deployment scripts

* bring in scenario files
* shift infra code into functions

Change-Id: I650a26d03d842c3afcc7fcb97b84ef4826827a38
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Bring in opendaylight support

Change-Id: I2eed0cf19907f257be1cb4aee96528cc41f4843a
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Set salt bootstrap distrib revision

Change-Id: Id278afd05fd8793f573fce0d4ca1ff7420fc9127
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Get latest salt-formulas code

Change-Id: I6284589343bfcdc4f35734d5c291ad0a2bf02d74
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Remove redundant services from noha scenario

Change-Id: I445f6ac802fbf1b382b18bcb4306eb5538cb1867
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Make virtual cluster as noha w/ one controller

* remove glusterfs from cluster
* increase amount of ram on controller
* bring in one more compute node

Change-Id: I04ccd4cdaf65bb860d6d3b9c012e035f598e44d5
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Correct ssh key copy options

Change-Id: Iea7a28fcd2ae59bc3ba76bffb42675dfc4bc917d
Signed-off-by: Volodymyr Blokhin <vladrulez@gmail.com>

[mcp] Mend networks config

* create openstack/neutron external network
* set default gateway for mgmt network

Change-Id: I71c22ab6d1b8c589c1cf147aa37874600ab1cbd7
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

[mcp] Set default address for salt master

Change-Id: Iaa9cd3d5734fbf81a224d00ee006b63a66a915f0
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

[mcp] Copy ssh key to tmp dir

Copy ssh key to tmp dir to be able to retrieve
OS credentials by releng/utils/fetch_os_creds.sh

Also adds 'set -x' to ci/deploy.sh

Change-Id: I056c626288862f84f47c947461894730ce0483ac
Signed-off-by: Andrii Ostapenko <aostapenko@mirantis.com>

[mcp] Mend dpdk scenario

Make a reboot of the compute nodes to activate hugepages support
and re-apply required states then. Also align ovs lcore & pmd
masks with two cpu nodes.

Change-Id: I4a5defe6f08e912aba2d939ba5ba057af768a40c
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

[mcp] Bring in dpdk scenario support

Change-Id: Ifd6d61026a0e98e8faf59c7d218333122d70ffe9
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

[mcp] Mend installation scripts

* add/unify ssh options
* get base image to temporary directory
* specify os type for virt install
* fix symbolic link to reclass
* remove outdated fuel submodules

Change-Id: I6833ce78c8fff97e1b89f4e92e6e6b470e9ce99f
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

[mcp] Replace reclass system models with submodule

Change-Id: Id693f7b0f3542d605b0f71601f3bd21eb882c7ba
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

[mcp] Bring in deployment scripts

Change-Id: I7d2af958e447a5892f7cd1f6c6fb8616951e2ff3
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

[mcp] Bring in reclass system salt models

Change-Id: I1a865b7524f3a5242544e60e6b36b1092721c58b
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Adding mpolenchuk@mirantis.com to committers list

Change-Id: I973810e55ea24ba879fd91ac47388d52d43867e2
Signed-off-by: agardner <agardner@linuxfoundation.org>

f_kvmpluginbuild: Allow overrides in config.mk

Change-Id: I2e124e09b884a06ab84864fbf3f2173224a99fc6
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

docs: Refresh reference for Danube 2.0

Change-Id: If786099581cf8bf685cc2076c21d4c3041610bf7
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

Merge "Revert "Revert "Select the fastest mirror of repos"""

Revert "Revert "Select the fastest mirror of repos""

This reverts commit 7785a18f592ecd6eeb307b7bc2f5b134e8e07221.
https://bugs.launchpad.net/fuel/+bug/1669751 has been resolved.

Change-Id: I009cf6cba8aaa7ff2ae625c5067aa4d1570e4793
JIRA: FUEL-261
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Update kvm4nfv commit id

This kvm4nfv commit includes changes for the config file which disable
vt-d by default and has the x2apic enabled.

Change-Id: I2e8085792fb8222dfc59d4ece0ac58ec9a16c1bd
Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com>

Merge "Update the kvm4nfv git commit"

Fix for reap.py giving negative id's for nodes

Sort node id's as integer values instead of strings
in order to return the actual minimum value
by which the new list of nodes is generated

JIRA: https://jira.opnfv.org/browse/FUEL-208

Change-Id: If59d0d0ff9823076b337b042bceb4a736f1f9153
Signed-off-by: Catalina Focsa <catalina.focsa@enea.com>

Update the kvm4nfv git commit

Update the kvm4nfv git commit_id to latest kernel, so that it includes
the patch for the bxn driver changes.

Change-Id: I63e58de24d5f993868b6046eb1b93c9e61c9668f
Signed-off-by: Yunhong Jiang <yunhong.jiang@linux.intel.com>

Merge "[tacker] Adjust tackerc to v3 of identity api"

[tacker] Adjust tackerc to v3 of identity api

JIRA: FUEL-267
Change-Id: Ia0e9ed3298681319c870132628d930175e084bc0
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

f_repobuild: Add remaining packages explicitly

Packetary automatically solves for Fuel@OPNFV:
- base pkgs and their deps;
- bootstrap/target image additional pkgs;
- explicit reqs;

However, corner cases like "pcs", which is not in any of the
above categories - being installed via puppet only, need to be
added to the explicit list.

NOTE: This enables full offline deploys for simple scenarios
(i.e. without any plugins). Each plugin might need additional
packages, which will be handled in further patches.
See the bug report for more information.

JIRA: FUEL-250

Change-Id: Id1d31c98308cdee6cb935627984188561b560ff4
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

Merge "fuel-menu: Align defaults w/ OPNFV bootstrap cfg"

[kvm-plugin]Modifying kernel modules

Omitted the ovs kernel modules from kvmfornfv kernel modules for
the plugin.

Change-Id: Id907b829c843587c7fbd7914e19a243b77e7d5aa
Signed-off-by: Navya Bathula <navyax.bathula@intel.com>

fuel-menu: Align defaults w/ OPNFV bootstrap cfg

Instead of overwriting fuel_bootstrap_cli.yaml during post-install,
with a static config which we need to manually sync in OPNFV after
each upstream change, make the whole thing dynamic by syncing (via
patch) fuel-menu's default settings with OPNFV bootstrap.

This allows us to drop the static fuel_bootstrap_cli.yaml.

JIRA: FUEL-266

Change-Id: I132f2a272c764ad0fc84b3e0e0e1222b1fab1cd2
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

Merge "build/install: Add USB boot option"

Merge "Double allocated memory of fuel master node"

build/install: Add USB boot option

Use isohybrid to add MBR for booting via BIOS
from USB flash drives

Also, Makefile "$(wildcard ubuntu-builder/*)" does not expand
to what is expected (does not include ubuntu-builder/Dockerfile),
as it uses a previous cached value.
Check this link for an explanation:
http://stackoverflow.com/questions/41470676/makefile-variable-expansion-with-wildcard-when-rule-creates-new-file

JIRA: FUEL-236

Change-Id: I9c6521a382917822ce930ddf76391c5f3c3a9cb7
Signed-off-by: Matei Valeanu <Matei.Valeanu@enea.com>

Double allocated memory of fuel master node

Rise up allocated memory of fuel master node for virtual envs in order
to avoid swapping and improve performance of overall deployment process.

Change-Id: I04b020b628a9c84f934a9d17e8be98d34fe2a085
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Update Host OS NTP Servers to pool.ntp.org

Old *.fuel.pool.ntp.org values are no longer accessible

Change-Id: I0879dbd6a262491b4dc9f24d77fb87a007cbaec8
Signed-off-by: Catalina Focsa <catalina.focsa@enea.com>

Revert "Revert: Blueprint "bp/distributed-serialization""

This reverts commit 8b28c44a4be6beef8a71e672f543001bcc0a080f.
The issue has been fixed in upstream.

Change-Id: Id4ad8fb7b1ec887f8d8d1d5b18a9b33a73bda10c
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Revert: Blueprint "bp/distributed-serialization"

Until upstream fixes bug [1], partially revert blueprint
implementation [2]:
- fuel-agent: no-op, we overwrite fuel_bootstrap_cli.yaml anyway;
- fuel-library: no-op, keep newly added port config in place;
- fuel-web: revert all blueprint related changes;

NOTE: When this blueprint becomes part of Fuel@OPNFV, we need to
      update our "fuel_bootstrap_cli.yaml".

[1] https://bugs.launchpad.net/fuel/+bug/1676197
[2] https://review.openstack.org/#/q/topic:bp/
    distributed-serialization+status:merged+branch:stable/newton

JIRA: FUEL-265

Change-Id: Icf392a3446e5c89c2592d1733bc1f3401b7d69ad
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

Log delete environment issue

Log delete environment issue instead of fail with it since
it ain't severe operation to break down whole deployment process.

Change-Id: Ibbdf41a1323970068c09efcd1355f95f030ef1e6
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

[kvm-plugin] Update the kernel version

Change-Id: Ieeb773e4801073caf50e5b795054aab64d3c7009
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Extend error messages list

Start redeploy if errors for the following bugs are caught:
https://bugs.launchpad.net/fuel/+bug/1673797
https://bugs.launchpad.net/fuel/+bug/1672683

Change-Id: I41bc10d983f193e4206f0913358f5710f034070a
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Merge "Update for fuel10 onos plugin"

Merge "[kvm-plugin] Rename node_reboot task"

Revert "[kvm/dpdk] Switch vlan mode to vxlan"

This reverts commit b8584eeb13c75d7f20a4582d287ab7ac1d52f0af.
vxlan mode has broken in upstream:
https://bugs.launchpad.net/fuel/+bug/1673767

Change-Id: I71fabf1c74f419ab1f6d5d04a294be98fa927ef3
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

[kvm-plugin] Rename node_reboot task

Change-Id: I5251f209c74613d8b4683f1923166513762cd526
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Update for fuel10 onos plugin

Change-Id: Ie7e9b5c16505223616bc6d796ce8de60236d098c
Signed-off-by: rssaravana <saravanakumar.somaskandan@huawei.com>

Merge "f_repos: Set git patch format explicitly"

f_tacker-pluginbuild: Force cache ID change

This will force a rebuild of Tacker plugin, to bypass poisoned
cache.

Change-Id: I77a028d56cc6202f799c7c0af3b688674256106c
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

Revert "Increase tcp_retries2 value"

This reverts commit 0b313e2c089d296232a9a7ca43e9f37d514400a0.
This patch has been merged into upstream.

Change-Id: I15ba6f161547b7fd928c4ed54f8a9eef58046e48
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Catch nodes flapping issue

Wait for nodes to become online to row down the bug
https://bugs.launchpad.net/fuel/+bug/1672969

Change-Id: Ic0621a415461c1552ebfc9cd7d1ab2061ea7a8cb
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

f_repos: Set git patch format explicitly

Skip patch format auto-detection, by setting it explicitly to "mbox".
This allows adding license headers to patch files.

JIRA: ARMBAND-236

Change-Id: I2b19ced80984ea98e220935c9d36836e62203bb7
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

Merge "Rebase yardstick to stable/danube"

Merge "Rebase vsperf to stable/danube"

Rebase yardstick to stable/danube

Change-Id: I8d284e92608d3fa89cbbe97ccb32536f3a9fae37
Signed-off-by: Guo Ruijing <ruijing.guo@intel.com>

Rebase vsperf to stable/danube

Change-Id: I621d45c2db74ca3a030f15e29e167a890560ee2d
Signed-off-by: Guo Ruijing <ruijing.guo@intel.com>

Merge "Rebase barometer to stable/danube"

Rebase barometer to stable/danube

Change-Id: I5c550d8919a9b2147745caa0c7302f55291ca437
Signed-off-by: Guo Ruijing <ruijing.guo@intel.com>

Rebase to fuel ovs plugin stable/10.0

Change-Id: Ib1cce4ca265ec8716272597aeff97d8195276e61
Signed-off-by: Guo Ruijing <ruijing.guo@intel.com>

Merge "docs: Adding Labels"

docs: Adding Labels

Labels serve as anchors/ refs when referenced from other documents
This patch adds labels to docs/*/*/index.rst

Change-Id: I50572f9300e4be91e5fd35b96383d9075b229be2
Signed-off-by: ShubhamRathi <shubhamiiitbackup@gmail.com>

Update to get the latest bug fix in ODL plugin

https://review.openstack.org/#/q/32b7edbde866b6a4c1c61e674ddf01a93dd010a2

Change-Id: I9b943bd1fd47f98d9bab9eef23faf6f01650f929
Signed-off-by: “Manuel Buil” <mbuil@suse.com>

Enable experimental features by default

JIRA: FUEL-260
Change-Id: I2235a876ffd8a403548b380fe28b62c67b0b43ea
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Revert "Select the fastest mirror of repos"

This reverts commit fc94d23c7780bab8d14ecf7f04603c2c1d4aa7d3.
Since connectivity_tests doesn't support "mirror" method.

Change-Id: I1fa0a8fafbce0dec271fed67b3599efd40d5cac0
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Select the fastest mirror of repos

apt-get supports a "mirror" method that will automatically
select a closest mirror based on geographical location.

Change-Id: I15d345de759e616a705abcdec3588ea4b9409d0a
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>

Update documentation for Danube

Change-Id: I535eb87bfa980cffc8e091b896b505884ed12d32
Signed-off-by: Serg Melikyan <smelikyan@mirantis.com>

patch-packages: Disable mechanism once again

Now that cirros-testvm DEB patching is no longer needed, disable
patch-pacakges mechanism. This saves a few minutes from each build.

Change-Id: I2e0c8f86a5fda55cb57a3d08a3f585cb535eb2f4
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>