apex-tripleo-heat-templates.git
7 years agoMerge "Update metric processing delay default"
Jenkins [Tue, 6 Jun 2017 12:57:48 +0000 (12:57 +0000)]
Merge "Update metric processing delay default"

7 years agoMerge "Fix the constraints for THT params NeutronDpdkCoreList and HostCpusList"
Jenkins [Mon, 5 Jun 2017 19:26:22 +0000 (19:26 +0000)]
Merge "Fix the constraints for THT params NeutronDpdkCoreList and HostCpusList"

7 years agoMerge "Example environment file to use Neutron BGPVPN driver with ODL"
Jenkins [Mon, 5 Jun 2017 15:28:06 +0000 (15:28 +0000)]
Merge "Example environment file to use Neutron BGPVPN driver with ODL"

7 years agoMerge "Remove nova placement config for compute service node on upgrade"
Jenkins [Mon, 5 Jun 2017 12:59:44 +0000 (12:59 +0000)]
Merge "Remove nova placement config for compute service node on upgrade"

7 years agoMerge "Release 7.0.0.0b2"
Jenkins [Mon, 5 Jun 2017 10:19:13 +0000 (10:19 +0000)]
Merge "Release 7.0.0.0b2"

7 years agoRelease 7.0.0.0b2
Emilien Macchi [Mon, 5 Jun 2017 08:16:05 +0000 (10:16 +0200)]
Release 7.0.0.0b2

Change-Id: Ie8010969443324dc76be8ade8edc1390b073345b

7 years agoUpdate metric processing delay default
Pradeep Kilambi [Tue, 30 May 2017 18:48:21 +0000 (14:48 -0400)]
Update metric processing delay default

This helps with processing the backlog, so lets update
the default out of the box.

Change-Id: I06d4ca95f4a1da2864f4845ef3e7a74a1bce9e41

7 years agoMerge "Containerize Redis for HA"
Jenkins [Sun, 4 Jun 2017 11:57:35 +0000 (11:57 +0000)]
Merge "Containerize Redis for HA"

7 years agoContainerize Redis for HA
Damien [Tue, 9 May 2017 09:11:21 +0000 (05:11 -0400)]
Containerize Redis for HA

This service allows configuring and deploying Redis containers
in a HA overcloud managed by pacemaker.

The containers are managed and run by pacemaker. Inside there is
pacemaker_remote which will invoke the resource agent managing galera.
The resources themselves are created via puppet-pacemaker inside a
short-lived container used for this purpose (mysql_init_bundle).
This container needs to use the 'docker_config' section to invoke
puppet (as opposed to 'docker_puppet_tasks'), because due to the HA
composability each resource creation needs to happen on the bootstrap
node of that service and 'docker_puppet_tasks' will only run on the
controller/primary role.

Co-Authored-By: Michele Baldessari <michele@acksyn.org>
Closes-Bug: #1692924

Depends-On: Ia1131611d15670190b7b6654f72e6290bf7f8b9e

Change-Id: Ie045954fcc86ef2b3e4562b6f012853177f03948

7 years agoMerge "Containerize clustercheck galera monitor for HA deployments"
Jenkins [Sat, 3 Jun 2017 19:55:10 +0000 (19:55 +0000)]
Merge "Containerize clustercheck galera monitor for HA deployments"

7 years agoMerge "Containerize HAProxy for HA"
Jenkins [Sat, 3 Jun 2017 18:17:45 +0000 (18:17 +0000)]
Merge "Containerize HAProxy for HA"

7 years agoMerge "Containerize RabbitMQ for HA"
Jenkins [Sat, 3 Jun 2017 18:17:38 +0000 (18:17 +0000)]
Merge "Containerize RabbitMQ for HA"

7 years agoMerge "Containerize MySQL for HA"
Jenkins [Sat, 3 Jun 2017 18:17:31 +0000 (18:17 +0000)]
Merge "Containerize MySQL for HA"

7 years agoMerge "Modify vhost user socket directory's default value in environment file"
Jenkins [Sat, 3 Jun 2017 09:10:02 +0000 (09:10 +0000)]
Merge "Modify vhost user socket directory's default value in environment file"

7 years agoMerge "Add support for linuxbridge agent"
Jenkins [Sat, 3 Jun 2017 01:48:27 +0000 (01:48 +0000)]
Merge "Add support for linuxbridge agent"

7 years agoMerge "Server blacklist support"
Jenkins [Fri, 2 Jun 2017 23:12:08 +0000 (23:12 +0000)]
Merge "Server blacklist support"

7 years agoMerge "Add sshd service to containerized compute role"
Jenkins [Fri, 2 Jun 2017 23:12:00 +0000 (23:12 +0000)]
Merge "Add sshd service to containerized compute role"

7 years agoMerge "Upgrade gnocchi without skip-storage"
Jenkins [Fri, 2 Jun 2017 22:17:51 +0000 (22:17 +0000)]
Merge "Upgrade gnocchi without skip-storage"

7 years agoMerge "Handle upgrading cinder-volume under pacemaker"
Jenkins [Fri, 2 Jun 2017 15:33:42 +0000 (15:33 +0000)]
Merge "Handle upgrading cinder-volume under pacemaker"

7 years agoIncrease default for NovaReservedHostMemory to 4096
Sven Anderson [Tue, 16 May 2017 15:44:55 +0000 (17:44 +0200)]
Increase default for NovaReservedHostMemory to 4096

Idle compute nodes are found to already consume ~1.5GB of memory, so
2GB is a bit tight.  Increasing to 4GB to be on the safe side.  Also
see https://bugzilla.redhat.com/show_bug.cgi?id=1341178

Change-Id: Ic95984b62a748593992446271b197439fa12b376

7 years agoServer blacklist support
James Slagle [Fri, 12 May 2017 19:04:23 +0000 (15:04 -0400)]
Server blacklist support

Adds the ability to blacklist servers from all SoftwareDeployment
resources. The servers are specified in a new list parameter,
DeploymentServerBlacklist by the Heat assigned name
(overcloud-compute-0, etc).

implements blueprint disable-deployments

Change-Id: I46941e54a476c7cc8645cd1aff391c9c6c5434de

7 years agoFix the constraints for THT params NeutronDpdkCoreList and HostCpusList
Karthik S [Wed, 31 May 2017 12:31:59 +0000 (08:31 -0400)]
Fix the constraints for THT params NeutronDpdkCoreList and HostCpusList

This fix needs to be backported to ocata.

Change-Id: I5938761efa4f56e576f41929e0bc12df246ac81a
Signed-off-by: Karthik S <ksundara@redhat.com>
Closes-Bug: #1694703

7 years agoUpgrade gnocchi without skip-storage
Pradeep Kilambi [Thu, 25 May 2017 21:13:17 +0000 (17:13 -0400)]
Upgrade gnocchi without skip-storage

When gnocchi-upgrade run, we need to ensure storage is upgraded so we
initialize the necessary storage sacks.

Closes-bug: #1693621

Change-Id: I84e4fc3b6ad7fd966c4097a29678a0fd5b7a20a5

7 years agoMerge "Containerized nova-compute working with Deployed Server"
Jenkins [Wed, 31 May 2017 10:05:58 +0000 (10:05 +0000)]
Merge "Containerized nova-compute working with Deployed Server"

7 years agoMerge "Enable arp_accept for all interfaces"
Jenkins [Tue, 30 May 2017 16:15:56 +0000 (16:15 +0000)]
Merge "Enable arp_accept for all interfaces"

7 years agoMerge "Change database sync timeout from 300 to 900 in low-memory-usage environment...
Jenkins [Tue, 30 May 2017 14:51:48 +0000 (14:51 +0000)]
Merge "Change database sync timeout from 300 to 900 in low-memory-usage environment file."

7 years agoMerge "docker bootstrap service commands"
Jenkins [Tue, 30 May 2017 13:52:28 +0000 (13:52 +0000)]
Merge "docker bootstrap service commands"

7 years agoceilometer-expirer: remove the crontab during upgrade
Emilien Macchi [Thu, 18 May 2017 20:17:41 +0000 (16:17 -0400)]
ceilometer-expirer: remove the crontab during upgrade

When running disabled/ceilometer-expirer.yaml, we want to remove the
crontab that used to run ceilometer-expirer binary in periodic way.
Let's use Puppet to remove this crontab.

We can't easily use Ansible tasks this time, because the Ansible cron
module can only remove Crontabs previously managed by Ansible:
https://docs.ansible.com/ansible/cron_module.html#examples

In this case, Puppet will erase the crontab in Pike. In Queens, we'll be
able to remove these environments files since we wouldn't need it
anymore.

Change-Id: Idb050c3b281d258aea52d6a3ef40441bb9c8bcbe

7 years agoContainerized nova-compute working with Deployed Server
Jiri Stransky [Fri, 26 May 2017 11:53:30 +0000 (13:53 +0200)]
Containerized nova-compute working with Deployed Server

When using the Deployed Server feature, we rely on Puppet to install
packages. But nova-compute/libvirt puppet is running in a container, so
it cannot install anything on the host. We rely on virtlogd on the host,
so we need to install it there some way. This patch uses host_prep_tasks
for that, conditionally based on the EnablePackageInstall stack
parameter value.

Also multinode-container-upgrade.yaml env is copied as
multinode-containers.yaml, to remove the naming confusion, as the
environment file can be used for more than just upgrades. The old env
file will be removed once we make the upgrade job use the new one (catch
22 type of issue).

Change-Id: Ia9b3071daa15bc30792110e5f34cd859cc205fb8

7 years agoMerge "Add RoleNetHostnameMap output"
Jenkins [Fri, 26 May 2017 16:56:32 +0000 (16:56 +0000)]
Merge "Add RoleNetHostnameMap output"

7 years agoAdd sshd service to containerized compute role
Oliver Walsh [Fri, 26 May 2017 15:53:10 +0000 (16:53 +0100)]
Add sshd service to containerized compute role

This adds the sshd puppet service to the containerized compute role

All other roles already include this service from the defaults roles data,
it is only missing from the compute role.

As the sshd service runs on the docker host, this must remain as a
traditional puppet service. NB the sshd puppet service does not enable
sshd, it just enables the management of the sshd config via t-h-t/puppet.

Closes-bug: #1693837
Change-Id: I86ff749245ac791e870528ad4b410f3c1fd812e0

7 years agoMerge "Store role_data in an OS::Heat::Value resource"
Jenkins [Fri, 26 May 2017 15:41:51 +0000 (15:41 +0000)]
Merge "Store role_data in an OS::Heat::Value resource"

7 years agoMerge "Add heat environment for disabling all telemetry services"
Jenkins [Fri, 26 May 2017 15:32:46 +0000 (15:32 +0000)]
Merge "Add heat environment for disabling all telemetry services"

7 years agoMerge "Add ignore_projects to filter gnocchi events"
Jenkins [Fri, 26 May 2017 14:08:26 +0000 (14:08 +0000)]
Merge "Add ignore_projects to filter gnocchi events"

7 years agoHandle upgrading cinder-volume under pacemaker
Alan Bishop [Tue, 23 May 2017 14:42:24 +0000 (10:42 -0400)]
Handle upgrading cinder-volume under pacemaker

Add upgrade tasks for cinder-volume when it's controlled by pacemaker:

o Stop the service before the entire pacemaker cluster is stopped.
  This ensures the service is stopped before infrastructure services
  (e.g. rabbitmq) go away.
o Migrate the cinder DB prior to restarting the service. This covers
  the situation when puppet-cinder (who otherwise would handle the db
  sync) isn't managing the service.
o Start the service after the rest of the pacemaker cluster has been
  started.

Closes-Bug: #1691851
Change-Id: I5874ab862964fadb68320d5c4de39b20f53dc25c

7 years agoMerge "Align optional services with optional services-docker"
Jenkins [Fri, 26 May 2017 08:49:02 +0000 (08:49 +0000)]
Merge "Align optional services with optional services-docker"

7 years agoAdd heat environment for disabling all telemetry services
John Trowbridge [Thu, 25 May 2017 13:24:57 +0000 (09:24 -0400)]
Add heat environment for disabling all telemetry services

This will be used in our HA OVB CI job where we currently are
failing due to running out of memory. Telemetry will still be
tested via scenarios, but this will free up a large chunk of
memory in the most memory intensive job.

Closes-Bug: 1693174
Change-Id: Idefe9f0de47c5b0f29b7326642d697ed179e2eb8

7 years agoEnable arp_accept for all interfaces
Ihar Hrachyshka [Wed, 24 May 2017 01:13:28 +0000 (18:13 -0700)]
Enable arp_accept for all interfaces

OpenStack heavily relies on gratuitous ARP updates when moving floating
IP addresses between devices. When a floating IP moves, Neutron L3 agent
issues a burst of gratuitous ARP packets that should update any existing
ARP table entries on all nodes that belong to the same network segment.

Due to locktime kernel behavior, some gratuitous ARP packets may be
ignored [1], rendering ARP table entries broken for some time. Due to a
kernel bug [2], the time may be as long as hours, depending on other
traffic flowing to the node.

With the current EL7 kernel, the only way to make sure that nodes honor
all sent gratuitous ARP updates is to set arp_accept to 1; this will
disable locktime mechanism for the packets sent by Neutron L3 agent, and
will make sure ARP tables are always updated.

[1] https://patchwork.ozlabs.org/patch/762732/
[2] https://bugzilla.redhat.com/show_bug.cgi?id=1450203

Related-Bug: #1690165
Change-Id: I863b240e0ab4c4d5bb844f91b607fd0937d5cedf

7 years agoAdd ignore_projects to filter gnocchi events
Pradeep Kilambi [Tue, 23 May 2017 14:41:22 +0000 (10:41 -0400)]
Add ignore_projects to filter gnocchi events

Without this, ceilometer db gets hammered with gnocchi swift events.
Keystone creds are required so middleware can query for id.

Related change:  I5c0f4f1a2c7fe7eb39ea6441970e9ac0946a4ec1

Change-Id: I9a7a80252703e470a69dc10352e7ece45ab23150

7 years agoAlign optional services with optional services-docker
Bogdan Dobrelya [Thu, 25 May 2017 16:24:11 +0000 (18:24 +0200)]
Align optional services with optional services-docker

Add missing optional services for docker, if present in
non-docker optional services, and vice versa.

Fix issues with non containerized Mongo resources are
missing when deploying optional containerized zaqar service.

Add non containerized Ironix-Pxe resources to the optional
Ironic services, as it is done for the containerized Ironic.

Change-Id: I56675e015fa4bbd6d9809dbf7c21453939321410
Signed-off-by: Bogdan Dobrelya <bdobreli@redhat.com>
7 years agoMerge "Include mongodb in scenario002 job"
Jenkins [Thu, 25 May 2017 16:19:22 +0000 (16:19 +0000)]
Merge "Include mongodb in scenario002 job"

7 years agoMerge "Remove duplicate PreConfig definition"
Jenkins [Thu, 25 May 2017 15:06:35 +0000 (15:06 +0000)]
Merge "Remove duplicate PreConfig definition"

7 years agoAdd support for linuxbridge agent
Bartosz Stopa [Wed, 19 Apr 2017 07:38:11 +0000 (09:38 +0200)]
Add support for linuxbridge agent

Currently TripleO does not support LinuxBridge driver, setting
NeutronMechanismDrivers to linuxbridge will not force ml2 plugin
to use linuxbridge.

This commit adds new environment file which replaces default ovs
agent with linuxbridge on Compute and Controller nodes.

Change-Id: I433b60a551c1eeb9d956df4d0ffb6eeffe980071
Closes-Bug: #1652211
Depends-On: Iae87dc7811bc28fe86db0c422c363eaed5e5285b
Depends-On: Ie3ac03052f341c26735b423701e1decf7233d935

7 years agoInclude mongodb in scenario002 job
Pradeep Kilambi [Tue, 23 May 2017 18:19:44 +0000 (14:19 -0400)]
Include mongodb in scenario002 job

Since we disable mongodb by default, zaqar needs it in sceanio002 job.
Lets explicitly include it so it doesnt fail with:

Error while evaluating a Function Call, Could not find data item mongodb_node_ips
in any Hiera data file and no default supplied at
 /etc/puppet/modules/tripleo/manifests/profile/base/zaqar.pp

Change-Id: I8f66def467d0c0175ad76f2ba5256b6a431934a8

7 years agoMerge "Enable mistral to run under mod_wsgi"
Jenkins [Thu, 25 May 2017 10:38:49 +0000 (10:38 +0000)]
Merge "Enable mistral to run under mod_wsgi"

7 years agoContainerize RabbitMQ for HA
Dan Prince [Mon, 3 Apr 2017 18:12:36 +0000 (14:12 -0400)]
Containerize RabbitMQ for HA

This service allows configuring and deploying RabbitMQ containers
in a HA overcloud managed by pacemaker.

The containers are managed and run by pacemaker. Inside there is
pacemaker_remote which will invoke the resource agent managing galera.
The resources themselves are created via puppet-pacemaker inside a
short-lived container used for this purpose (mysql_init_bundle).
This container needs to use the 'docker_config' section to invoke
puppet (as opposed to 'docker_puppet_tasks'), because due to the HA
composability each resource creation needs to happen on the bootstrap
node of that service and 'docker_puppet_tasks' will only run on the
controller/primary role.

Co-Authored-By: Michele Baldessari <michele@acksyn.org>
Co-Authored-By: John Eckersberg <jeckersb@redhat.com>
Closes-Bug: #1692909

Depends-On: I0722e4a4d4716f477e8304cfa1aadd3eef7c2f31

Change-Id: I942737134385af775cade40c2d69516d4fe31a99

7 years agoContainerize MySQL for HA
Damien Ciabrini [Mon, 10 Apr 2017 14:43:09 +0000 (14:43 +0000)]
Containerize MySQL for HA

This service allows configuring and deploying MySQL/galera containers
in a HA overcloud managed by pacemaker.

The containers are managed and run by pacemaker. Inside there is
pacemaker_remote which will invoke the resource agent managing galera.
The resources themselves are created via puppet-pacemaker inside a
short-lived container used for this purpose (mysql_init_bundle).
This container needs to use the 'docker_config' section to invoke
puppet (as opposed to 'docker_puppet_tasks'), because due to the HA
composability each resource creation needs to happen on the bootstrap
node of that service and 'docker_puppet_tasks' will only run on the
controller/primary role.

Co-Authored-By: Michele Baldessari <michele@acksyn.org>
Closes-Bug: #1692842

Depends-On: I3b4d8ad2eec70080419882d5d822f78ebd3721ae

Change-Id: I790dbc30b3de1c1a3fe76d3d8f060e4d7f95e2e7

7 years agoContainerize HAProxy for HA
Damien Ciabrini [Tue, 25 Apr 2017 08:59:31 +0000 (10:59 +0200)]
Containerize HAProxy for HA

This service allows configuring and deploying HAProxy containers
in a HA overcloud managed by pacemaker.

The containers are managed and run by pacemaker. Pacemaker runs the
standard Kolla image but overrides the initial command so that
it explicitely calls HAProxy. This way, we shield ourselves from any
unexpected future change in Kolla.
This container needs to use the 'docker_config' section to invoke
puppet (as opposed to 'docker_puppet_tasks'), because due to the HA
composability each resource creation needs to happen on the bootstrap
node of that service and 'docker_puppet_tasks' will only run on the
controller/primary role.

Co-Authored-By: Michele Baldessari <michele@acksyn.org>
Closes-Bug: #1692908

Depends-On: Ifcf890a88ef003d3ab754cb677cbf34ba8db9312

Change-Id: I2f679bfe195733f4507e9b9e920b678e1370bb82

7 years agoRemove duplicate PreConfig definition
Jiri Stransky [Wed, 24 May 2017 13:00:22 +0000 (15:00 +0200)]
Remove duplicate PreConfig definition

We had two exactly the same definitions of PreConfig in
docker_steps.j2.yaml. We should remove one of them.

I chose to remove the first definition, as the 2nd definition is amended
by change I674a4d9d2c77d1f6fbdb0996f6c9321848e32662, so we'll avoid a
conflict.

Change-Id: If65e30daefcf6552e085c7648c6691b7068834d4

7 years agoFix race condition between docker-puppet and container steps
Jiri Stransky [Wed, 24 May 2017 10:21:47 +0000 (12:21 +0200)]
Fix race condition between docker-puppet and container steps

GenerateConfigDeployment wasn't anchored with dependencies anywhere. If
it took too long to complete and step 1 of containers creation already
started executing, problems happened. This is now fixed by adding the
required dependency relationship.

Change-Id: Ie7dfd2a965e704ba278d4c2fad67f14a3a62799e
Closes-Bug: #1692503

7 years agoMerge "Role Specific paramaeter support for neutron-ovs-dpdk-agent service"
Jenkins [Wed, 24 May 2017 09:33:17 +0000 (09:33 +0000)]
Merge "Role Specific paramaeter support for neutron-ovs-dpdk-agent service"

7 years agoContainerize clustercheck galera monitor for HA deployments
Damien Ciabrini [Tue, 18 Apr 2017 21:00:58 +0000 (21:00 +0000)]
Containerize clustercheck galera monitor for HA deployments

In HA overcloud deployments, HAProxy makes use of a helper service called
"clustercheck", to check whether galera nodes are available for serving
traffic.

This change implements a dedicated service for clustercheck, which was
originally part of the pacemaker mysql service.  The service is
configured by tripleo and the container's lifecycle is managed by docker,
like other containerized services.

Closes-Bug: #1692969
Change-Id: I8a5b30429f8ec3e484256a62a29ab7dee33ab291
Co-Authored-By: Michele Baldessari <michele@acksyn.org>
Depends-on: I1aabe34fa6a9c8c705a4405f275b66502c313cf2

7 years agoMerge "Remove osd_pool_default_min_size to allow Ceph cluster to do the right thing...
Jenkins [Tue, 23 May 2017 15:58:48 +0000 (15:58 +0000)]
Merge "Remove osd_pool_default_min_size to allow Ceph cluster to do the right thing by default"

7 years agoMerge "docker/TLS-everywhere: Add metadata_settings output to templates"
Jenkins [Tue, 23 May 2017 14:31:09 +0000 (14:31 +0000)]
Merge "docker/TLS-everywhere: Add metadata_settings output to templates"

7 years agoExample environment file to use Neutron BGPVPN driver with ODL
Ricardo Noriega [Tue, 23 May 2017 10:49:28 +0000 (12:49 +0200)]
Example environment file to use Neutron BGPVPN driver with ODL

  Service_provider is configured to point to networking-odl

Change-Id: Icdb1c1414b237a9409e8e7dc55bb3c01da41841c
Signed-off-by: Ricardo Noriega <rnoriega@redhat.com>
7 years agoMerge "Example environment file to use L2GW Neutron Driver with ODL"
Jenkins [Tue, 23 May 2017 10:21:23 +0000 (10:21 +0000)]
Merge "Example environment file to use L2GW Neutron Driver with ODL"

7 years agoMerge "Disable mongodb by default"
Jenkins [Tue, 23 May 2017 10:01:47 +0000 (10:01 +0000)]
Merge "Disable mongodb by default"

7 years agoMerge "Updated from global requirements"
Jenkins [Tue, 23 May 2017 00:09:56 +0000 (00:09 +0000)]
Merge "Updated from global requirements"

7 years agoMerge "Use disabled suffix for disabled service names"
Jenkins [Tue, 23 May 2017 00:08:28 +0000 (00:08 +0000)]
Merge "Use disabled suffix for disabled service names"

7 years agoRemove osd_pool_default_min_size to allow Ceph cluster to do the right thing by default
Keith Schincke [Fri, 12 May 2017 12:12:56 +0000 (08:12 -0400)]
Remove osd_pool_default_min_size to allow Ceph cluster to do the right thing by default

The default value is 0 which has the minimum number be caluclated based on the replica count
from osd_pool_defaut_size. The default replica count is 3 and the calculated min_size is 2.
If the replica count is 1 then the min_size is 1. ie: min_size = replica - (replica/2)
Add CephPoolDefaultSize parameter to ceph-mon.yaml. This parameter defaults to 3 but can
be overriden. See puppet-ceph-devel.yaml for an example

Change-Id: Ie9bdd9b16bcb9f11107ece614b010e87d3ae98a9

7 years agodocker bootstrap service commands
Dan Prince [Wed, 17 May 2017 12:58:57 +0000 (08:58 -0400)]
docker bootstrap service commands

This patch guards db syncs and initialization code from executing
on multiple nodes at the same time by using the new
bootstrap_host_exec script. This helper script checks to make
sure the container is executing on the "bootstrap host" for the
specified service (arg 0) and then if it matches runs the
specified command.

Depends-On: If25f217bbb592edab4e1dde53ca99ed93c0e146c
Depends-On: Ic1585bae27c318bd6bafc287e905f2ed250cce0f

Change-Id: I0c864ca093ea476248b619d8c88477ef0b64e2eb
Closes-Bug: 1688380

7 years agoUpdated from global requirements
OpenStack Proposal Bot [Mon, 22 May 2017 15:58:04 +0000 (15:58 +0000)]
Updated from global requirements

Change-Id: I468f654fa75b22aef398e2cba9c3625eb8f0767c

7 years agodocker/TLS-everywhere: Add metadata_settings output to templates
Juan Antonio Osorio Robles [Mon, 22 May 2017 14:35:56 +0000 (17:35 +0300)]
docker/TLS-everywhere: Add metadata_settings output to templates

This is needed since it's what writes the service metadata to the nova
server in order to create the kerberos principals. It worked in a base
controller since the keystone template does have this. But if we would
deploy these services on a separate role, it would break. So this output
is needed.

bp tls-via-certmonger-containers

Change-Id: I3ee8c65d356dcd092a3fbf79041e5c69ef23b721

7 years agoExample environment file to use L2GW Neutron Driver with ODL
Ricardo Noriega [Mon, 22 May 2017 14:38:09 +0000 (16:38 +0200)]
Example environment file to use L2GW Neutron Driver with ODL

  Agent service is disabled and service_provider is configured
  to point to networking-odl

Change-Id: I570d15a092cff66666a74e95dee69f6531a58b22
Signed-off-by: Ricardo Noriega <rnoriega@redhat.com>
7 years agoMerge "Re-Add ceilometer expirer to roles_data"
Jenkins [Mon, 22 May 2017 13:22:05 +0000 (13:22 +0000)]
Merge "Re-Add ceilometer expirer to roles_data"

7 years agoMerge "Add Neutron L2 Gateway service to scenario 004"
Jenkins [Mon, 22 May 2017 12:15:30 +0000 (12:15 +0000)]
Merge "Add Neutron L2 Gateway service to scenario 004"

7 years agoDisable mongodb by default
Juan Antonio Osorio Robles [Fri, 19 May 2017 11:35:39 +0000 (14:35 +0300)]
Disable mongodb by default

It's not used by any service that we enable by default. So instead, I
added it to the environment that enables the services that use it.

Change-Id: Id2e6550fb7c319fc52469644ea022cf35757e0ce

7 years agoUse disabled suffix for disabled service names
Juan Antonio Osorio Robles [Mon, 22 May 2017 08:32:05 +0000 (11:32 +0300)]
Use disabled suffix for disabled service names

This changes both the service names and the file names for disabled
services, adding the 'disabled' suffix to them.

This comes with the reasoning that, if a service requires a disabled
service, and checks for the name in the "service_names" hiera entry, it
will appear as if the service was enabled, when it's actually not. So
changing the name and using this convention prevents that issue.

Change-Id: I308d6680a4d9b526f22ba0d7d20e5db638aadb9a

7 years agoModify vhost user socket directory's default value in environment file
Saravanan KR [Wed, 3 May 2017 14:19:57 +0000 (10:19 -0400)]
Modify vhost user socket directory's default value in environment file

From ocata, the vhost socket directory requires a different set of
permissions from the default directory (/var/run/openvswitch). Modifying
the directory to a new agreed directory which will be created in puppet.
Closes-Bug: #1687993
Depends-On: I255f98c40869e7508ed01a03a96294284ecdc6a8

Change-Id: I77250ca84c9da2fb5a8381e6f60234f8a05cbf12

7 years agoMerge "TLS everywhere: configure mongodb's TLS settings"
Jenkins [Mon, 22 May 2017 07:56:00 +0000 (07:56 +0000)]
Merge "TLS everywhere: configure mongodb's TLS settings"

7 years agoRe-Add ceilometer expirer to roles_data
Juan Antonio Osorio Robles [Mon, 22 May 2017 07:13:53 +0000 (10:13 +0300)]
Re-Add ceilometer expirer to roles_data

Even though this service was disabled by default in Pike[1], we still
want the entry in roles_data since it will actually disable the service
on upgrade.

A comment was added so we remember to remove it in Queens.

[1] Icffb7d1bb2cf7bd61026be7d2dcfbd70cd3bcbda

Change-Id: I2012d7494207bf3239f589bf80b8048abf72428f

7 years agoAdd Neutron L2 Gateway service to scenario 004
Carlos Camacho [Fri, 12 May 2017 07:59:48 +0000 (09:59 +0200)]
Add Neutron L2 Gateway service to scenario 004

This submission installs the Neutron L2 Gateway service
in the scenario 004.

This is only to check that the service is installed correctly
no sanity check is running yet.

Change-Id: I421802e9aa1a9f192860a6d72b4bb7c729666c3a

7 years agoChange database sync timeout from 300 to 900 in low-memory-usage environment file.
Or Idgar [Tue, 9 May 2017 08:46:46 +0000 (08:46 +0000)]
Change database sync timeout from 300 to 900 in low-memory-usage environment file.

During a deployment on lower spec systems, the "db sync" can take longer than five minutes.
The solution is to increase the default value of DatabaseSyncTimeout from 300 to 900
by using the environment file "low-memory-usage.yaml".

Change-Id: I6463dbdd4dfe1d6f2dd283211cc496fe3a628fb0
Closes-bug: #1689318

7 years agoMerge "Open ports 443 and 80 on haproxy's firewall when horizon is standalone"
Jenkins [Sat, 20 May 2017 02:57:49 +0000 (02:57 +0000)]
Merge "Open ports 443 and 80 on haproxy's firewall when horizon is standalone"

7 years agoMerge "Comment parameters for registry in docker.yaml"
Jenkins [Sat, 20 May 2017 01:15:08 +0000 (01:15 +0000)]
Merge "Comment parameters for registry in docker.yaml"

7 years agoMerge "Support Redfish hardware in the overcloud Ironic"
Jenkins [Sat, 20 May 2017 00:20:29 +0000 (00:20 +0000)]
Merge "Support Redfish hardware in the overcloud Ironic"

7 years agoMerge "Add IronicInspector settings to the network map"
Jenkins [Sat, 20 May 2017 00:18:51 +0000 (00:18 +0000)]
Merge "Add IronicInspector settings to the network map"

7 years agoMerge "Dell SC: Add secondary DSM support"
Jenkins [Sat, 20 May 2017 00:18:44 +0000 (00:18 +0000)]
Merge "Dell SC: Add secondary DSM support"

7 years agoMerge "Consolidate writing json configs with HostPrepTasks"
Jenkins [Sat, 20 May 2017 00:08:35 +0000 (00:08 +0000)]
Merge "Consolidate writing json configs with HostPrepTasks"

7 years agoMerge "Add missing release note for cadf environment"
Jenkins [Sat, 20 May 2017 00:08:24 +0000 (00:08 +0000)]
Merge "Add missing release note for cadf environment"

7 years agoMerge "Update the template_version alias for all the templates to pike."
Jenkins [Sat, 20 May 2017 00:07:38 +0000 (00:07 +0000)]
Merge "Update the template_version alias for all the templates to pike."

7 years agoMerge "Make sure that manila share is created after share type"
Jenkins [Fri, 19 May 2017 19:40:14 +0000 (19:40 +0000)]
Merge "Make sure that manila share is created after share type"

7 years agoMerge "Add containerized neutron-metadata agent"
Jenkins [Fri, 19 May 2017 10:33:00 +0000 (10:33 +0000)]
Merge "Add containerized neutron-metadata agent"

7 years agoAdd RoleNetHostnameMap output
Steven Hardy [Wed, 17 May 2017 13:34:06 +0000 (14:34 +0100)]
Add RoleNetHostnameMap output

This exposes a list of hostnames similar to the RoleNetIpMap, this
will be consumed by the dynamic inventory ref
https://review.openstack.org/465558

Change-Id: I61efac5634e9b6fbb820e693c71a0adae5fa8b6a

7 years agoRole Specific paramaeter support for neutron-ovs-dpdk-agent service
Saravanan KR [Wed, 15 Mar 2017 17:59:41 +0000 (23:29 +0530)]
Role Specific paramaeter support for neutron-ovs-dpdk-agent service

Merge the role specific parmaeter with the default parameter with the
higher precendece given to role specific parameters. Use the merged
settings to the hiera config settings.
Change-Id: I500558dfbf4ac4ddcf850064e654c4fab03d141b

7 years agoUpdate the template_version alias for all the templates to pike.
Carlos Camacho [Fri, 17 Feb 2017 10:12:36 +0000 (11:12 +0100)]
Update the template_version alias for all the templates to pike.

Master is now the development branch for pike
changing the release alias name.

Change-Id: I938e4a983e361aefcaa0bd9a4226c296c5823127

7 years agoMake sure that manila share is created after share type
Jan Provaznik [Fri, 19 May 2017 07:28:00 +0000 (09:28 +0200)]
Make sure that manila share is created after share type

The pingtest template creates both default share type and
a share which should use this type. Explicit reference of
the share type should assure that the share is always created
when share type exists.

Change-Id: I756e6a8e477de8d0e46302dda26265ae482dd2e5
Closes-Bug: #1691853

7 years agoMerge "Add l2gw neutron agent support"
Jenkins [Fri, 19 May 2017 06:52:31 +0000 (06:52 +0000)]
Merge "Add l2gw neutron agent support"

7 years agoMerge "neutron: set enable_dvr = False if NeutronEnableDVR is false"
Jenkins [Thu, 18 May 2017 23:14:45 +0000 (23:14 +0000)]
Merge "neutron: set enable_dvr = False if NeutronEnableDVR is false"

7 years agoMerge "Enable splay for os-collect-config"
Jenkins [Thu, 18 May 2017 18:34:35 +0000 (18:34 +0000)]
Merge "Enable splay for os-collect-config"

7 years agoneutron: set enable_dvr = False if NeutronEnableDVR is false
Ihar Hrachyshka [Mon, 15 May 2017 20:20:25 +0000 (13:20 -0700)]
neutron: set enable_dvr = False if NeutronEnableDVR is false

This will make neutron-server stop advertising dvr extension if the
cloud is not configured to support this flavor of Neutron routers.

Change-Id: I38c8208edff07f7887887918729beb7710068078
Related-Bug: #1450067

7 years agoAdd containerized neutron-metadata agent
Brent Eagles [Tue, 16 May 2017 18:25:46 +0000 (15:55 -0230)]
Add containerized neutron-metadata agent

This patch adds support for running the neutron metadata agent in a
container.

Change-Id: I53c62516c95d62f5ced70818d4eb4c2c341df0d7
Partial-Bug: #1668922

7 years agoMerge "TLS-everywhere: Configure CA for apache"
Jenkins [Thu, 18 May 2017 13:19:27 +0000 (13:19 +0000)]
Merge "TLS-everywhere: Configure CA for apache"

7 years agoMerge "Default snmp to less verbose logging"
Jenkins [Thu, 18 May 2017 11:15:32 +0000 (11:15 +0000)]
Merge "Default snmp to less verbose logging"

7 years agoComment parameters for registry in docker.yaml
Steven Hardy [Thu, 18 May 2017 09:53:10 +0000 (10:53 +0100)]
Comment parameters for registry in docker.yaml

These duplicate the defaults in puppet/services/docker.yaml and
break things if you include an environment file (e.g that generated
by quickstart containers-default-parameters.yaml) before the
docker.yaml.

Instead it's probably more helpful to include the commented lines
showing how to enable use of a local docker registry.

Change-Id: I3896fa2ea7caa603186f0af04f6d8382d50dd97a
Closes-Bug: #1691524

7 years agoAdd l2gw neutron agent support
Peng Liu [Tue, 14 Mar 2017 06:39:35 +0000 (14:39 +0800)]
Add l2gw neutron agent support

L2 Gateway (L2GW) is an API framework for OpenStack that offers bridging
two or more networks together to make them look at a single broadcast
domain. This patch implements the l2gw agent which is one of the backend
of the l2 gateway service plugin.

Change-Id: I1ae8132ceff9410be7bd82caddf0d14251e720bf
Depends-On: If1501c153b1b170b9550cb7e5a23be463fba1fe9
Partially-Implements: blueprint l2gw-service-integration
Signed-off-by: Peng Liu <pliu@redhat.com>
7 years agoMerge "Use upper-constraints for tox"
Jenkins [Thu, 18 May 2017 00:05:13 +0000 (00:05 +0000)]
Merge "Use upper-constraints for tox"

7 years agoMerge "docker/internal TLS: spawn extra container for neutron server's TLS proxy"
Jenkins [Wed, 17 May 2017 17:39:30 +0000 (17:39 +0000)]
Merge "docker/internal TLS: spawn extra container for neutron server's TLS proxy"

7 years agoMerge "Don't delete failed docker-puppet containers"
Jenkins [Wed, 17 May 2017 17:13:22 +0000 (17:13 +0000)]
Merge "Don't delete failed docker-puppet containers"

7 years agoUse upper-constraints for tox
Alex Schultz [Wed, 17 May 2017 17:01:07 +0000 (11:01 -0600)]
Use upper-constraints for tox

Use the openstack upper-constraints when running tox.

Change-Id: I9eef36eec749beec0effdb2309fe2ceb9bc557f8
Related-Bug: #1691511