Tim Rozet [Mon, 25 Jun 2018 13:36:45 +0000 (09:36 -0400)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Apex: update 3rd party netvirt CI
Intel slave no longer exists. Moves the Apex netvirt snapshots to run on
Apex slaves.
Change-Id: I3d9d32455e5a24cb64070677a32c5908cc331326
Signed-off-by: Tim Rozet <trozet@redhat.com>
Rodolfo Alonso Hernandez [Thu, 12 Apr 2018 14:08:58 +0000 (15:08 +0100)]
Update git submodules
* Update docs/submodules/yardstick from branch 'stable/fraser'
- Improve IXIA IxNetwork library and traffic profile (4)
This patch implements an active wait for the traffic injection. Once the
traffic is started, the traffic generator class will poll periodically the
IXIA traffic generator chassis to retrieve the status of the traffic
("started", "stopped").
Now the latency statistics are retrieved and reported for each injection
period.
JIRA: YARDSTICK-1116
Change-Id: I4422e2c88b4fc97b7cac3de8a82b2d75467c4117
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
Signed-off-by: Emma Foley <emma.l.foley@intel.com>
(cherry picked from commit
a3399d07b83ce0e50d9c0144d00a7ba83a73390f)
- Improve IXIA IxNetwork library and traffic profile (3)
This patch modifies IP packet parameters.
"IxNextgen.update_ip_packet" modifies the L3 packet according to the
test case and setup the IP addresses.
JIRA: YARDSTICK-1116
Change-Id: I46ff75ab1989d0e6f5cc876418a015386717e06f
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
Signed-off-by: Emma Foley <emma.l.foley@intel.com>
(cherry picked from commit
e5c78ae3ec1bcf0cb44646c6031fb9c04dd63e4a)
- Improve IXIA IxNetwork library and traffic profile (2)
This patch modifies the way the packet frame and the flow is configured
before the injection.
"IxNextgen.update_frame" modifies the L2 frame according to the
test case and setup the frame rate, frame size, traffic injection
duration and MAC addresses.
JIRA: YARDSTICK-1116
Change-Id: Ife08f15a4eda24d7835c92c4172b450854d112ee
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
Signed-off-by: Emma Foley <emma.l.foley@intel.com>
(cherry picked from commit
8d10a6a8447fc2798491a6f3856e21b85fa309ba)
Rodolfo Alonso Hernandez [Tue, 10 Apr 2018 07:39:16 +0000 (08:39 +0100)]
Update git submodules
* Update docs/submodules/yardstick from branch 'stable/fraser'
- Improve IXIA IxNetwork library and traffic profile (1)
This patch introduces a new way to configure the TCL IxNetwork server.
All the configuration is done using the TCL API, removing the need of
using the pre-saved configuration file.
"IxNextgen.assign_ports" creates and assigns the virtual ports for each
physical port defined in the test case.
"IxNextgen.create_traffic_item" creates one traffic item and two flow
groups per pair of ports, in both directions.
"IxNextgen.gt_statistics" retrieves only the required statistics to
generate the samples blob in the traffic generator.
JIRA: YARDSTICK-1116
Change-Id: I8f1c0c55e99c274b2ed8276ed9a385c502e16d93
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
Signed-off-by: Emma Foley <emma.l.foley@intel.com>
(cherry picked from commit
ee721fd3e8b77ccfe4252a107a9af8dc41ccc389)
Ryota Mibu [Mon, 25 Jun 2018 10:14:31 +0000 (10:14 +0000)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Merge "Update the repo script to only list repos once"
- Update the repo script to only list repos once
When projects have multiple releases (ex 6.0, 6.1) the repos would be
listed multiple times when only wanting repo names. This change still
supports listing the repos when they have multiple versions.
Change-Id: I7b0c96649b5486d91b177f95cf175bebcb53815b
Signed-off-by: Trevor Bramwell <tbramwell@linuxfoundation.org>
Rodolfo Alonso Hernandez [Mon, 25 Jun 2018 09:20:44 +0000 (09:20 +0000)]
Update git submodules
* Update docs/submodules/yardstick from branch 'stable/fraser'
- Merge "Add active wait function" into stable/fraser
- Add active wait function
Added function "wait_until_true". This function will make an active
wait until the predicate passed as an argument returns True.
If the timeout expires, the function will raise a generic exception
or a user defined one passed as an argument.
This function will be used in YARDSTICK-1127.
JIRA: YARDSTICK-1128
Change-Id: I9854e465ac6b586bf4be39ab4b266d5625b39e30
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
(cherry picked from
099108aab37d1fae1b27f4e2e20136c234df1a52)
Rodolfo Alonso Hernandez [Mon, 25 Jun 2018 09:20:39 +0000 (09:20 +0000)]
Update git submodules
* Update docs/submodules/yardstick from branch 'stable/fraser'
- Merge "Add IxNetwork API Python Binding package" into stable/fraser
- Add IxNetwork API Python Binding package
Add IxNetwork python package to the requirements list.
This module is needed for the "NSPerf" scenarios using IXIA as traffic
generator, when IxNetwork is the program used to handle the IXIA
generator.
The latest version of this module is 8.40.1124.9 [1]. The license type
is MIT.
[1] https://pypi.python.org/pypi/ixnetwork
JIRA: YARDSTICK-1106
Change-Id: I279933c95994f5120930256a104c4192a0b9900d
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
Rodolfo Alonso Hernandez [Mon, 25 Jun 2018 07:48:11 +0000 (07:48 +0000)]
Update git submodules
* Update docs/submodules/yardstick from branch 'stable/fraser'
- Merge "Use TRex release v2.41 to support both x86 and aarch64" into stable/fraser
- Use TRex release v2.41 to support both x86 and aarch64
Currently Yardstick uses Cisco's TRex release v2.28 which
can only support x86, for the consideration of
multi-arch support of Yardstick, the trex release v2.41
is now available and it can support multi-arch(both x86
and aarch64) now.
For the external lib of v2.41, for x86_64, it looks like:
external_libs/pyzmq-14.5.0/python2/intel/ucs4/64bit/zmq
for arm64, it looks like:
external_libs/pyzmq-14.5.0/python2/arm/ucs4/64bit/zmq
So replace the trex release v2.28 with v2.41.
JIRA: YARDSTICK-1191
Change-Id: I22dc3499283d48a89da1145cc480fd7d2a93a1cc
Signed-off-by: trevortao <trevor.tao@arm.com>
(cherry picked from commit
13f19d35a04ffb46ca673e81385779bc46c48781)
Tomi Juvonen [Mon, 25 Jun 2018 04:36:53 +0000 (07:36 +0300)]
Update git submodules
* Update docs/submodules/doctor from branch 'stable/fraser'
- Doctor releasenotes Fraser 6.2
Change-Id: I18625dc03f050e2d424cfcd1bd10534647db5525
Signed-off-by: Tomi Juvonen <tomi.juvonen@nokia.com>
Delia Popescu [Fri, 22 Jun 2018 10:37:17 +0000 (13:37 +0300)]
Update git submodules
* Update docs/submodules/armband from branch 'stable/fraser'
- [patch] Rebase latest changes
Change-Id: I2ada30db2d076dab8895c77075255c1bac062fe2
Signed-off-by: Delia Popescu <delia.popescu@enea.com>
Emma Foley [Fri, 22 Jun 2018 16:45:56 +0000 (16:45 +0000)]
Update git submodules
* Update docs/submodules/yardstick from branch 'stable/fraser'
- Merge "Configure ACL via static file" into stable/fraser
- Configure ACL via static file
This patch allows user to configure ACL/vFW SampleVNF ACL
via configuration file provided in TC definition. The
Yardstick applies the rules to SampleVNF from specified config
file + rules generated by Yardstick (default rules).
The example of SampleVNF ACL CLI commands generated/applied
by Yardstick can be found at (using default ACL config file):
ACL VNF ACL CLI commands:
acl/tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex.yaml
http://paste.openstack.org/show/723303/
vFW VNF ACL CLI commands:
vfw/tc_heat_rfc2544_ipv4_1rule_1flow_64B_trex.yaml
http://paste.openstack.org/show/723304/
Change-Id: I76a630261a982083b628e3985fc3bec14ca495db
Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
(cherry picked from commit
3fdca97ff5053770161059a34a95fd39463eaecd)
Emma Foley [Fri, 22 Jun 2018 16:39:35 +0000 (16:39 +0000)]
Update git submodules
* Update docs/submodules/yardstick from branch 'stable/fraser'
- Merge "Move tests: unit/network_services/traffic_profile" into stable/fraser
- Move tests: unit/network_services/traffic_profile
* Fix pylint errors
* Add TODOs
Some errors are ignored locally, as they were a symptom of other problems.
These issues have been flagged with a TODO, and should be fixed later.
JIRA: YARDSTICK-837
Signed-off-by: Emma Foley <emma.l.foley@intel.com>
Change-Id: Id983a2e415d66633331e7fea96a377e2a7589980
(cherry-picked from commit
cfc40ad1bb36889e54bc99cb779cfcfa1f3b04dd)
Emma Foley [Fri, 22 Jun 2018 16:37:53 +0000 (16:37 +0000)]
Update git submodules
* Update docs/submodules/yardstick from branch 'stable/fraser'
- Merge "Cleanup BaseMonitor unit tests" into stable/fraser
- Cleanup BaseMonitor unit tests
Stop multiprocessing queues to avoid BrokenPipe exception.
Assert correctly the raise of exceptions.
JIRA: YARDSTICK-1229
Change-Id: I1a1c92c49a439283a35c9a69b59d6866f35ec09a
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
(cherry picked from commit
94d56c9f7cd99baea08629eaf3e580d020494383)
Abhijit Sinha [Fri, 22 Jun 2018 15:46:31 +0000 (15:46 +0000)]
Update git submodules
* Update docs/submodules/yardstick from branch 'stable/fraser'
- Merge "MQ startup process refactor" into stable/fraser
- MQ startup process refactor
JIRA: YARDSTICK-1112
Change-Id: Id30236e190bae9fb0f5b5ebd4c5e04798e4fd443
Signed-off-by: Chornyi, TarasX <tarasx.chornyi@intel.com>
(cherry picked from commit
d38bd854fb2c3eb6c0c4dd34ace2a52af7cf892d)
Emma Foley [Fri, 22 Jun 2018 15:21:59 +0000 (15:21 +0000)]
Update git submodules
* Update docs/submodules/yardstick from branch 'stable/fraser'
- Merge "Add "host_name_separator" variable to Context class" into stable/fraser
- Add "host_name_separator" variable to Context class
This feature will provide Kubernetes context the ability to handle the
context name inside the class itself, providing to the developer an
abstraction of the possible naming limitations in Kubernetes. E.g.:
"dot" character in Pod names is no allowed [1].
[1] https://github.com/fabric8io/fluent-plugin-kubernetes_metadata_filter/issues/58
JIRA: YARDSTICK-1188
Change-Id: I82121f970b550170357a443b6340be7900602a57
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
(cherry picked from commit
a2ee61016721386b40caa4e2d72f61be8adec94a)
Emma Foley [Fri, 22 Jun 2018 15:13:32 +0000 (15:13 +0000)]
Update git submodules
* Update docs/submodules/yardstick from branch 'stable/fraser'
- Merge "Move IncorrectConfig, IncorrectSetup and IncorrectNodeSetup to exceptions" into stable/fraser
- Move IncorrectConfig, IncorrectSetup and IncorrectNodeSetup to exceptions
JIRA: YARDSTICK-1218
Change-Id: I804065e9bce3e728f5bf9e756a78df8fd28f74ac
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
(cherry picked from commit
dc0e675f47f4dbf1b54ce9c22878e2e876bc26e8)
Rodolfo Alonso Hernandez [Fri, 22 Jun 2018 11:43:07 +0000 (11:43 +0000)]
Update git submodules
* Update docs/submodules/yardstick from branch 'stable/fraser'
- Merge "Do not start collectd twice when SampleVNF is running on Baremetal" into stable/fraser
- Do not start collectd twice when SampleVNF is running on Baremetal
JIRA: YARDSTICK-1167
Change-Id: I7591bbb2a84ee4039a20c5da2914f1e374299015
Signed-off-by: Chornyi, TarasX <tarasx.chornyi@intel.com>
(cherry picked from commit
ba2ca2819a8b0312627742d126030c3dac15052f)
Mytnyk, Volodymyr [Wed, 4 Apr 2018 15:30:08 +0000 (16:30 +0100)]
Update git submodules
* Update docs/submodules/yardstick from branch 'stable/fraser'
- Add scale out TCs with availability zone support
Add PROX and vFW scale out TCs with availability zone
configuration. To be able to specify the availability
zone for specific VNF or TG the following example of
command line option shoud be used:
yardstick -d task start --task-args='{
"num_vnfs": 2, "availability_zone":
{
"vnf_0": "az_0", "tg_0": "az_0",
"vnf_1": "az_1", "tg_1": "az_1",
... }}' <SCALE-OUT-TC-FILE>
The steps to run new scale-out TCs is documented in the
userguide.
JIRA: YARDSTICK-1203
Change-Id: Ib3878485c5483981fe9b48ab02995712bcc31ae5
Signed-off-by: Mytnyk, Volodymyr <volodymyrx.mytnyk@intel.com>
(cherry picked from commit
0156b5c37e08f91a37dda08edb854758bbba7413)
Rodolfo Alonso Hernandez [Fri, 22 Jun 2018 07:23:19 +0000 (07:23 +0000)]
Update git submodules
* Update docs/submodules/yardstick from branch 'stable/fraser'
- Merge "Add --hwlb options as a command line argument for SampleVNF" into stable/fraser
- Add --hwlb options as a command line argument for SampleVNF
To enable HWLB queues in samplevnf on supported hardware
(e.g Intel Fortville) --hwlb option needs to be passed
as a VNF command line argument.
JIRA: YARDSTICK-1159
Change-Id: I6e5c098dc71a711252b545c7622ee52085fa81f0
Signed-off-by: Chornyi, TarasX <tarasx.chornyi@intel.com>
(cherry picked from commit
1c8bfeb11a620c63ffd9fcd7f8735ded4521e077)
Ryota Mibu [Fri, 22 Jun 2018 03:25:19 +0000 (03:25 +0000)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Merge "Add RTD Verify and Merge jobs for Releng"
- Add RTD Verify and Merge jobs for Releng
These jobs come from global-jjb[1]. On verify, 'tox -e docs' is ran
against releng, and on merge at webhook it curl-ed on RTD to build the
docs.
The merge job additionally requires jq installed to verify the build was
triggered.
[1] https://docs.releng.linuxfoundation.org/projects/global-jjb/en/latest/jjb/lf-rtd-jobs.html
Change-Id: Ib0d752a904a9fdda2ab13016509a0b82d34ec3ee
Signed-off-by: Trevor Bramwell <tbramwell@linuxfoundation.org>
Tim Rozet [Fri, 22 Jun 2018 00:15:16 +0000 (20:15 -0400)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Apex: more snapshot fixes
Changes-Include:
- Rename jobs to have 'os' in them to distinguish openstack branch
- Fix uploading snapshots to upload from the create directory (where
the artifacts are built and stored)
- Fix the properties file so that it is created if one does not exist
already upstream in the artifacts repo
Change-Id: I0d75fd41585538cbe860274a082cb4051d8b05c5
Signed-off-by: Tim Rozet <trozet@redhat.com>
Tim Rozet [Thu, 21 Jun 2018 17:56:02 +0000 (13:56 -0400)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Apex: Fix usage of gpg key import
Removes using source to call the gpg import script. source will execute
the script in the current shell, which will exit the artifact upload.
Adds checking to make sure we ignore any failure with running the
script.
Change-Id: I587cf9584f9fa8c4d315b7b2328a6c7c55ae3b88
Signed-off-by: Tim Rozet <trozet@redhat.com>
Rodolfo Alonso Hernandez [Fri, 1 Jun 2018 12:49:38 +0000 (13:49 +0100)]
Update git submodules
* Update docs/submodules/yardstick from branch 'stable/fraser'
- Move ErrorClass definition to exceptions module
JIRA: YARDSTICK-1216
Change-Id: I82556e1d1b0c723221a58e188067cbce560b8338
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
(cherry picked from commit
2bdda85878ed1507d1a91f69c3489bb9ba9d447d)
Tim Rozet [Thu, 21 Jun 2018 14:17:58 +0000 (10:17 -0400)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Fix gpg import error when node has no key
For some servers like lf-virtual3 there is no key locally or one
remotely. In that case we do not want the import script to fail the job,
like in:
https://build.opnfv.org/ci/job/apex-upload-snapshot/1/console
Change-Id: I13ddfdb45cd2d60bd911fa590bf9bf54bd288ba8
Signed-off-by: Tim Rozet <trozet@redhat.com>
Yang (Gabriel) Yu [Thu, 21 Jun 2018 09:23:11 +0000 (17:23 +0800)]
Update git submodules
* Update docs/submodules/bottlenecks from branch 'stable/fraser'
- Add sudo to docker
It seems sudo is not included in Bottlenecks docker.
This patch is to fix it.
Change-Id: Icb3c09acb877acfc4817b2aa67689045846c716d
Signed-off-by: Yang (Gabriel) Yu <Gabriel.yuyang@huawei.com>
(cherry picked from commit
76619a3824f213715e012fdb23df64b079a4ff48)
Rodolfo Alonso Hernandez [Thu, 21 Jun 2018 13:28:03 +0000 (13:28 +0000)]
Update git submodules
* Update docs/submodules/yardstick from branch 'stable/fraser'
- Merge "Convert SSH custom exceptions to Yardstick exceptions" into stable/fraser
- Convert SSH custom exceptions to Yardstick exceptions
JIRA: YARDSTICK-1215
Change-Id: I5ecfd3dccd91b07cd8de5309dfa1a372eff16ed0
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
(cherry picked from commit
dde8fa628483deec352e176cea8decdbf6bed7e8)
Rodolfo Alonso Hernandez [Thu, 21 Jun 2018 13:08:42 +0000 (13:08 +0000)]
Update git submodules
* Update docs/submodules/yardstick from branch 'stable/fraser'
- Merge "Remove AnsibleCommon class method mock" into stable/fraser
- Remove AnsibleCommon class method mock
In [1], several methods in "AnsibleCommon" class are mocked, but those
mocks are not removed after the test execution. Depending on the test
execution order, this affects other results.
[1] https://github.com/opnfv/yardstick/blob/stable/fraser/yardstick/tests/unit/service/test_environment.py#L20
JIRA: YARDSTICK-1214
Change-Id: I85ef702b3b5b2fda5cf453a21b9f0bec61b155f0
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
(cherry picked from commit
e204c5063ab86d4ed2bff296959afae43866890f)
Rodolfo Alonso Hernandez [Thu, 21 Jun 2018 13:04:55 +0000 (13:04 +0000)]
Update git submodules
* Update docs/submodules/yardstick from branch 'stable/fraser'
- Merge "Error when adding SR-IOV interfaces in SR-IOV context" into stable/fraser
- Error when adding SR-IOV interfaces in SR-IOV context
Method "add_sriov_interfaces" in Libvirt class throws an error when trying
to add SR-IOV interfaces in the XML file.
Function "setup_sriov_context" in SriovContext if passing to
"_enable_interfaces" method the XML file name instead of passing the XML
string.
JIRA: YARDSTICK-1189
Change-Id: If021c102311ecb98cb26934f78067dfc720e4291
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
(cherry picked from commit
72df0eaac4a2a1f23439af7f249c2b5d18d1b819)
Rodolfo Alonso Hernandez [Thu, 21 Jun 2018 13:04:50 +0000 (13:04 +0000)]
Update git submodules
* Update docs/submodules/yardstick from branch 'stable/fraser'
- Merge "Remove __init__ method overriding in HeatContextTestCase" into stable/fraser
- Remove __init__ method overriding in HeatContextTestCase
Unit test case clases should implement setUp() method instead of overriding
__init__() method.
JIRA: YARDSTICK-1210
Change-Id: I0f9a10575f9aeebf76dfa84619e59589b3ea83f6
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
(cherry picked from commit
619bed631f064a94ab20ac296802d467ebe32318)
Rodolfo Alonso Hernandez [Thu, 21 Jun 2018 13:04:21 +0000 (13:04 +0000)]
Update git submodules
* Update docs/submodules/yardstick from branch 'stable/fraser'
- Merge "Bump oslo.messaging version to 5.36.0" into stable/fraser
- Bump oslo.messaging version to 5.36.0
A decoding error was introduced in the AMQP libraries installed by
oslo.messaging version 5.30.2.
Error example:
File "/home/jenkins/opnfv/slave_root/workspace/yardstick-verify-master/
.tox/functional/local/lib/python2.7/site-packages/amqp/utils.py",
line 89, in str_to_bytes
return s.encode('utf-8')
UnicodeDecodeError: 'ascii' codec can't decode byte 0xd2 in position 3: ordinal not in range(128)
This problem is fixed in the library versions installed in version 5.36.0.
JIRA: YARDSTICK-1204
Change-Id: I4719d8e0a0891ebbb3b87c31d593d15f897ef53a
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
(cherry-picked from commit
bcc841699c8072a74378774593729931e81b4398)
Rodolfo Alonso Hernandez [Thu, 21 Jun 2018 13:04:08 +0000 (13:04 +0000)]
Update git submodules
* Update docs/submodules/yardstick from branch 'stable/fraser'
- Merge "Set "cmd2" library to version 0.8.6" into stable/fraser
- Set "cmd2" library to version 0.8.6
Last "cmd2" version, 0.9.0, removed Python 2+ support [1]. In order to
support Python 2.7, version 0.8.6 (or earlier) must be installed.
[1] https://github.com/python-cmd2/cmd2/commit/
e54e5a5b891548df4df0acb04b6e607ad8f871b1
JIRA: YARDSTICK-1205
Change-Id: Ic2fe57438720de5b21c75f9456e653c6facf3ae9
Signed-off-by: Rodolfo Alonso Hernandez <rodolfo.alonso.hernandez@intel.com>
(cherry picked from commit
c4d821c58858418ce8dfec95426f06ae11b25c7b)
John O Loughlin [Wed, 2 May 2018 07:50:53 +0000 (08:50 +0100)]
Update git submodules
* Update docs/submodules/yardstick from branch 'stable/fraser'
- Correctly set PYTHONPATH in Dockerfile
JIRA: YARDSTICK-1144
Change-Id: I8c0fe229ed620417a85356e017b171260373c43f
Signed-off-by: John O Loughlin <john.oloughlin@intel.com>
(cherry picked from commit
a114dc39f003beb1bb1ed12ed17fd3a6d0e7deaa)
Tim Rozet [Wed, 20 Jun 2018 22:39:07 +0000 (18:39 -0400)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Apex: fix parameter passing to snapshot jobs
GS_URL is required for the builders with the snapshot related jobs.
Change-Id: I4b194bbf5646361c527b522a25b71d4c268d9b6c
Signed-off-by: Tim Rozet <trozet@redhat.com>
Tim Rozet [Wed, 20 Jun 2018 17:52:03 +0000 (13:52 -0400)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Apex: Fix OS credentials fetch
Now that keystone V3 Identity is only one supported, OOO 'overcloudrc'
should be used in Queens and later as that contains V3 creds.
'overcloudrc.v3' will eventually be removed in OOO.
Note, this was causing tempest_smoke_serial to fail in Apex with Swift
test cases. This is due to the fact that in Apex we were only setting
the OS_REGION_NAME in overcloudrc, and functest was using
overcloudrc.v3. When Tempest does not have the region set it will simply
look for the first endpoint it can find for that service type, and was
not using the right keystone endpoint for Apex.
Change-Id: I154c9e762dfc5ba035f6e108606ecedcfb0d60d2
Signed-off-by: Tim Rozet <trozet@redhat.com>
Fatih Degirmenci [Wed, 20 Jun 2018 14:24:33 +0000 (14:24 +0000)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Merge "Update default DEPLOY_SCENARIO"
- Update default DEPLOY_SCENARIO
Change default deploy scenario
to os-nosdn-nofeature-noha
JIRA: FUNCTEST-972
Change-Id: Iea609c055436dd59c9de90a767069fc484090db5
Signed-off-by: Delia Popescu <delia.popescu@enea.com>
Tim Rozet [Wed, 20 Jun 2018 00:11:18 +0000 (20:11 -0400)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Apex: Removes workaround route for ODL with CSIT
This route was used as a hack for JIRA: APEX-112
Change-Id: Ia7afc95389ed4e3c7a4128318868bfe562b34b62
Signed-off-by: Tim Rozet <trozet@redhat.com>
Emma Foley [Fri, 27 Apr 2018 10:29:27 +0000 (10:29 +0000)]
Update git submodules
* Update docs/submodules/yardstick from branch 'stable/fraser'
- Move tests: unit/network_services/{lib/,collector/,*.py}
* Fix pylint errors
* Add TODOs
Some errors are ignored locally, as they were a symptom of other problems.
These issues have been flagged with a TODO, and should be fixed later.
JIRA: YARDSTICK-837
Signed-off-by: Emma Foley <emma.l.foley@intel.com>
Change-Id: Idc2e70291b6d9b4cf7e7249a10c4a290b999206c
(cherry picked from commit
2e75e6d27240945ec985998bbe9ec6241d11626a)
wutianwei [Tue, 19 Jun 2018 02:52:26 +0000 (10:52 +0800)]
Update git submodules
* Update docs/submodules/compass4nfv from branch 'stable/fraser'
- check ip_forward and set to 1
JIRA: COMPASS-600
Change-Id: I21ace213060d9d0dde7f7f4b5cf1f79d567ebeb0
Signed-off-by: wutianwei <wutianwei1@huawei.com>
(cherry picked from commit
1a1ed339b96458c483976a820e30b3a1bbb0b5d8)
Periyasamy Palanisamy [Tue, 19 Jun 2018 13:10:26 +0000 (13:10 +0000)]
Update git submodules
* Update docs/submodules/sdnvpn from branch 'stable/fraser'
- Merge "Create and pass references of flavor and image to tempest" into stable/fraser
- Create and pass references of flavor and image to tempest
When invoked from SDNVPN, Tempest scenario functest test cases
try to use flavor and image references from the tempest.conf file
which are currently empty.
This patch uses the default flavor that is created by the test
suite and the creates an image using the availabe cirros image,
which is deleted at the end.
JIRA: SDNVPN-209
Change-Id: I6a6fd636fec2c0fa7d35981ca51d59f06a4d9d69
Signed-off-by: nikoskarandreas <nick@intracom-telecom.com>
(cherry picked from commit
c6fbfb9651f5293c544351d3c9c549dfa24fafc6)
Stepan Andrushko [Mon, 18 Jun 2018 11:23:16 +0000 (14:23 +0300)]
Update git submodules
* Update docs/submodules/yardstick from branch 'stable/fraser'
- Update pmd/lcore mask for OVS-DPDK context
Added default values for pmd/lcore mask to the SampleVNF test case for
Trex TG.
lcore mask - specifies the CPU cores used for non-datapath OVS-DPDK
threads.
pmd mask - specifies the CPU cores used for data path packet processing.
Updated documentation for Standalone OVS-DPDK context.
JIRA: YARDSTICK-1246
Change-Id: I8d008a185c94d2047ffa4769d7974bc4d283fd7f
Signed-off-by: Stepan Andrushko <stepanx.andrushko@intel.com>
(cherry picked from commit
779a868348c3361f2a3054f06002807fd69a6549)
mei mei [Tue, 19 Jun 2018 07:29:11 +0000 (07:29 +0000)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Merge "[Dovetail] Increase frequency of Dovetail runs on Compass"
- [Dovetail] Increase frequency of Dovetail runs on Compass
Run Dovetail tests on every deployment of os-nosdn-nofeature and
os-odl_l3-nofeature-ha to improve testing turn-around time as we are
approaching the next release of Dovetail.
Change-Id: Idb5580871c47651eb1c01e917d9d93be73b9cd17
Signed-off-by: xudan <xudan16@huawei.com>
mei mei [Tue, 19 Jun 2018 07:29:02 +0000 (07:29 +0000)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Merge "[Dovetail] Bugfix a typo"
- [Dovetail] Bugfix a typo
Change-Id: I919e2510aea75dc530c5769a09d3c678f2246ea4
Signed-off-by: xudan <xudan16@huawei.com>
mei mei [Tue, 19 Jun 2018 07:28:50 +0000 (07:28 +0000)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Merge "Use Ipmi info provided with PDF"
- Use Ipmi info provided with PDF
For one HA test case, it needs the ipmi info to shutdown controller node.
Use PDF to get the impi info.
1. For Apex, it runs on lf-pod1, currently there is no PDF about this pod.
2. For Compass, it runs on huawei-pod2, also there is no PDF about this pod.
3. For Fuel, it runs on ericsson-pod1 and lf-pod2, use their PDFs.
Change-Id: I7d3d0b4ed6b16840ca25093d3ea877da203f58f8
Signed-off-by: xudan <xudan16@huawei.com>
Harry Huang [Fri, 15 Jun 2018 06:18:50 +0000 (14:18 +0800)]
Update git submodules
* Update docs/submodules/compass4nfv from branch 'stable/fraser'
- Specify netmask for install NIC
JIRA: COMPASS-599
Interface that be used as install NIC may
have uncertain netmask which may cause
network issue.
Change-Id: Ic10709ca82a0d16af614ac327160f97a654d2294
Signed-off-by: Harry Huang <huangxiangyu5@huawei.com>
(cherry picked from commit
da8ccfe3c89726673ff6c3d2a967fd670d40b6fd)
Cédric Ollivier [Mon, 18 Jun 2018 17:48:29 +0000 (19:48 +0200)]
Update git submodules
* Update docs/submodules/functest from branch 'stable/fraser'
- Add minimal docstings in clearwater_ims_base.py
It will allow forcing 10/10 in any new patchset.
Change-Id: I4cc52a9fb66fdd2c0dcbf9915be262acedac8672
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
(cherry picked from commit
f1353fff60344b01c588d9724b3b1de819cbe661)
Cédric Ollivier [Sun, 17 Jun 2018 09:41:08 +0000 (11:41 +0200)]
Update git submodules
* Update docs/submodules/functest from branch 'stable/fraser'
- Mock os.makedirs() in test_odl.py
os.makedirs() is called before calling robot.run.
Change-Id: Id651428343510683cd616d8101d22a73ccbf3dad
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
(cherry picked from commit
383ed86699816f633f007c515338d0fa022bf4fc)
Cédric Ollivier [Fri, 15 Jun 2018 15:55:23 +0000 (17:55 +0200)]
Update git submodules
* Update docs/submodules/functest from branch 'stable/fraser'
- Fix pylint warnings in clearwater_ims_base
Change-Id: I663bd2826e43ce888990b012df27ca94e2d49a8d
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
(cherry picked from commit
020ac360117ad3dffceef7286b2a4888664f5cf4)
Cédric Ollivier [Sun, 17 Jun 2018 11:36:12 +0000 (13:36 +0200)]
Update git submodules
* Update docs/submodules/functest from branch 'stable/fraser'
- Fix invalid method names in vnfs
Change-Id: Icff1a53ffd7b59d46543b79571b45872a9f243c3
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
Tim Rozet [Mon, 18 Jun 2018 14:47:10 +0000 (10:47 -0400)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Apex: Enable OS master clients with Tempest
We want to use OS master clients when testing with master OpenStack
(scenarios without any branch in the name).
Change-Id: I6b2814dcb6fd7e8a650782e13c1a765320e8cf98
Signed-off-by: Tim Rozet <trozet@redhat.com>
Trevor Bramwell [Mon, 18 Jun 2018 14:23:07 +0000 (14:23 +0000)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Merge "Update tox jjb command to use jjb 2.0.3"
- Update tox jjb command to use jjb 2.0.3
2.0.3 is the current JJB version being used by OPNFV.
This removes 'jjb/global' from the positional arguments as overriding
with '-- jjb' will throw errors files are included twice.
Change-Id: If9014fd8a5b92ade89d97994ea1b58f0b227c65a
Signed-off-by: Trevor Bramwell <tbramwell@linuxfoundation.org>
Cédric Ollivier [Sun, 17 Jun 2018 12:58:36 +0000 (14:58 +0200)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Add functest-tempest jjbs
Change-Id: I235be16a5f6818801cc1ba2ba2f67ec27e43a90c
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
Cédric Ollivier [Sun, 17 Jun 2018 12:54:48 +0000 (14:54 +0200)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Update FUNCTEST suite and tier names
Change-Id: I0bef73cf17e845faf3e1da42a07c5ada767fd731
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
- Update Functest testcase list
Change-Id: I1f9d2d594d1bd0e09edf4dd51cae2355623de7c2
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
- Run opnfv/functest-parser in Fraser daily jobs
Change-Id: I0a114482bdcb09beb634afd747b7c32f29d356cf
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
Cédric Ollivier [Sat, 16 Jun 2018 05:40:58 +0000 (07:40 +0200)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Stop running containers in privileged mode
It should be useless in case of Functest.
Change-Id: Iac214dc484079bf17bbbfc08c28554835fac3f69
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
Tim Rozet [Sat, 16 Jun 2018 03:00:48 +0000 (23:00 -0400)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Apex: Adds missing nosdn scenarios to daily
Change-Id: Ib1f508461c22e01ea2e9a7d855f79ed7aa25f68a
Signed-off-by: Tim Rozet <trozet@redhat.com>
Tim Rozet [Fri, 15 Jun 2018 19:34:07 +0000 (19:34 +0000)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Merge "[Dovetail] Increase frequency of Dovetail runs on Apex"
- [Dovetail] Increase frequency of Dovetail runs on Apex
Run Dovetail tests on every deployment of os-nosdn-nofeature to improve
testing turn-around time as we are approaching the next release of
Dovetail.
Change-Id: Ie4baf3c2f607aaf09135c4021258e9afb0aec826
Signed-off-by: Georg Kunz <georg.kunz@ericsson.com>
Yang (Gabriel) Yu [Wed, 13 Jun 2018 09:23:12 +0000 (17:23 +0800)]
Update git submodules
* Update docs/submodules/bottlenecks from branch 'stable/fraser'
- Update Dockerfile
1. Openstack command lines keep poping up warnings which
cause reading comand results wrongly.
2. Update the ubuntu version and packages to remove redundance
which is a historical debt.
Change-Id: I3cdb7a9ec3f0bc41ecfe5b8bf9d44878485de40f
Signed-off-by: Yang (Gabriel) Yu <Gabriel.yuyang@huawei.com>
(cherry picked from commit
0ea5233caabae215afb0769194a87f32a430fa2d)
Dimitrios Markou [Wed, 6 Jun 2018 11:14:15 +0000 (14:14 +0300)]
Update git submodules
* Update docs/submodules/sdnvpn from branch 'stable/fraser'
- [Bug Fix] Determine the BGP entity owner in ODL Cluster
In HA deployments is essential to determine which is the ODL
BGP entity owner and transform that ODL to BGP speaker.
This is necessary because of this bug [0] in netvirt. So
we can consider this as a workaround for the testcase_3.
Note: This patch is dependent on this task resolution [1]
for master branch.
Note: This patch works fine in stable/fraser branch.
[0] https://jira.opendaylight.org/browse/NETVIRT-1308
[1] https://jira.opnfv.org/browse/SDNVPN-217
Jira: SDNVPN-214
Change-Id: I383987e650da45400a3a6437dbdaaea904db9265
Signed-off-by: Dimitrios Markou <mardim@intracom-telecom.com>
Morgan Richomme [Fri, 15 Jun 2018 10:08:45 +0000 (10:08 +0000)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Merge "Remove functest-parser"
- Remove functest-parser
Parser should be fixed and then added to functest-smoke.
Change-Id: I4f9e6fa736589b1ed01feae580df18c93de168cd
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
Alexandru Avadanii [Thu, 14 Jun 2018 13:41:13 +0000 (15:41 +0200)]
Update git submodules
* Update docs/submodules/fuel from branch 'stable/fraser'
- [patch] Rebase keyserver proxy support (3)
Rebased on top of [1].
[1] https://github.com/salt-formulas/salt-formula-linux/commit/
9f30456
Change-Id: Iad5aef674c47d622a94d1c21cae3f46fbb3c52d8
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
(cherry picked from commit
fd1f3fa1c8c83b2e5f8cacc6a6caf1a14e40b1a5)
Abhijit Sinha [Thu, 14 Jun 2018 13:32:40 +0000 (13:32 +0000)]
Update git submodules
* Update docs/submodules/yardstick from branch 'stable/fraser'
- Merge "Bugfix: openrc api dump should be safe_dump" into stable/fraser
- Bugfix: openrc api dump should be safe_dump
1. fix safe_dump
2. fix pep8 problem, use flask_restapi custom error handling [1]
[1] https://flask-restful.readthedocs.io/en/latest/extending.html#custom-error-handlers
JIRA: YARDSTICK-1165
RestApi openrc dump clouds.yaml error
it now use yarml.dump, should be yaml.safe_dump.
dump would gererate !!python/unicode and cause error when upload openrc file in gui
Change-Id: Id3e85f7ba7d4967277ef79109b07d7552179e5db
Signed-off-by: rexlee8776 <limingjiang@huawei.com>
(cherry picked from commit
f1a71b2889da3b49358b10b9a12ea5a512dd2743)
Trevor Bramwell [Wed, 13 Jun 2018 20:13:34 +0000 (20:13 +0000)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Merge "Update repo archive script to handle empty repos"
- Update repo archive script to handle empty repos
After an empty repo is cloned, and we attempt to pull in changes, git
fails due to not know which branch to pull from. Explicitily pulling
from origin into master should resolve this.
Change-Id: I6bed85779c1bb571559c263800e8ea55ece3aa62
Signed-off-by: Trevor Bramwell <tbramwell@linuxfoundation.org>
Trevor Bramwell [Wed, 13 Jun 2018 20:13:24 +0000 (20:13 +0000)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Merge "Remove jjb-sandbox as we now have jjb-deploy"
- Remove jjb-sandbox as we now have jjb-deploy
Now that the sandbox is available and we can easily deploy jobs using
'jjb-deploy' or upload them through the cli, this outdated directory can
be removed.
Change-Id: I680dbc84eeba140adac7b69ea0af4ed26d160362
Signed-off-by: Trevor Bramwell <tbramwell@linuxfoundation.org>
Paul Vaduva [Wed, 13 Jun 2018 17:26:26 +0000 (19:26 +0200)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Remove quotes from PROJECT env
Change-Id: I0e169b8ea3135a49ccfed9fe9fe3550017faab95
Signed-off-by: Paul Vaduva <Paul.Vaduva@enea.com>
Alexandru Avadanii [Wed, 13 Jun 2018 16:22:57 +0000 (18:22 +0200)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- [auto] Fix missing yaml block marker
Change-Id: Ia1e95dce8f272cb53186314025fdd81419fc9d4d
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
Cédric Ollivier [Wed, 13 Jun 2018 12:56:23 +0000 (14:56 +0200)]
Update git submodules
* Update docs/submodules/functest from branch 'stable/fraser'
- Fix result parsing in cloudify_ims
The previous regex failed when errors are listed [1].
[1] https://build.opnfv.org/ci/view/functest/job/functest-apex-baremetal-daily-fraser/194/console
Change-Id: I57c8bfb8968555c3d43267a06f2bb9a2b95a3268
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
(cherry picked from commit
da3c805f8829f67d4d4154cd24f322ccf516b450)
Alexandru Avadanii [Mon, 11 Jun 2018 13:52:32 +0000 (15:52 +0200)]
Update git submodules
* Update docs/submodules/fuel from branch 'stable/fraser'
- [patch] Rebase keyserver proxy support
Rebase on top of [1].
[1] https://github.com/salt-formulas/salt-formula-linux/commit/
6f5e69e
Change-Id: Ic34bb9c1fad8778262f2e876c91667e903d143bf
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
(cherry picked from commit
79e32c8cc5631204d2e5b0b328c954a2a2197037)
mei mei [Wed, 13 Jun 2018 11:22:35 +0000 (11:22 +0000)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Merge "jjb/releng: fix compass-container $DOCKERFILE"
- jjb/releng: fix compass-container $DOCKERFILE
Use default $DOCKERFILE setting from downstream projects.
Change-Id: I0bfee5dcaef9a9eb7601548a1e5da5a5f8d51bb5
Signed-off-by: Yibo Cai <yibo.cai@arm.com>
wutianwei [Thu, 7 Jun 2018 08:55:44 +0000 (16:55 +0800)]
Update git submodules
* Update docs/submodules/compass4nfv from branch 'stable/fraser'
- set spice-html5 git repository URL
Change-Id: Ie2d473d3cdc804f698244f163c62bed30a5dd33d
Signed-off-by: wutianwei <wutianwei1@huawei.com>
(cherry picked from commit
3e8cc46ac37c5b89b606bd2ee1e3b389c84fd7fa)
Fatih Degirmenci [Wed, 13 Jun 2018 07:36:11 +0000 (09:36 +0200)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- xci: Disable Centos jobs until Intel lab is back
Due to Intel lab maintenance, the number of slaves will go down so we need
to have fewer jobs running. Centos is known to be problematic upstream and
it is better to disable them until the lab is back online to ensure the jobs
for other distros are impacted less.
Change-Id: Ifd8624e45282d68bd7acdf283ef7a499e81990e9
Signed-off-by: Fatih Degirmenci <fdegir@gmail.com>
Trevor Bramwell [Tue, 12 Jun 2018 22:28:06 +0000 (22:28 +0000)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Merge "[yardstick] update yardstick email list"
- [yardstick] update yardstick email list
remove Ross as he is no longer PTL.
Change-Id: I2661cf09cae4be5c16d06a237d2dbe1c7c591cfc
Signed-off-by: Ross Brattain <ross.b.brattain@intel.com>
Trevor Bramwell [Tue, 12 Jun 2018 22:24:13 +0000 (22:24 +0000)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Merge "Remove obsolete iptable rules"
- Remove obsolete iptable rules
It simply breaks parallel testing and seems useless/deprecated.
Change-Id: I7dafa65f4acfdabb089cf0e10c66d5eb632500c6
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
Trevor Bramwell [Tue, 12 Jun 2018 22:19:18 +0000 (22:19 +0000)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Merge "Add separate fraser jobs to Barometer container builds"
- Add separate fraser jobs to Barometer container builds
In order to support additonal features that have been added to
collectd since the 5.8 release, there needs to be a separate
stable and master container so we can support the new features
as well as the stable release.
This change will allow us to increment the version of collectd
as we add functest support, config guides and documentation,
while keeping the stable version container intact and available
for users to download.
JIRA: BAROMETER-102
Change-Id: I06ca84581a2e0f1a994cedf53aebc8f5cc3e7535
Signed-off-by: Emma Foley <emma.l.foley@intel.com>
Trevor Bramwell [Tue, 12 Jun 2018 22:17:25 +0000 (22:17 +0000)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Merge "Auto: Project Modification in armband jobs"
- Auto: Project Modification in armband jobs
In order for us to run a job template from
armband project and to override the project
parameter that defaults to auto we need to
modify the template for the deploy job from
armband.
Change-Id: Idf465107eb571d632dc09dbcce8e4c796648dc4b
Signed-off-by: Paul Vaduva <Paul.Vaduva@enea.com>
Tim Rozet [Tue, 12 Jun 2018 21:38:28 +0000 (21:38 +0000)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Merge "Apex: disable functest for k8s deployment in gate job"
- Apex: disable functest for k8s deployment in gate job
Change-Id: I554dd364dbcbef03c4bc54bc026af22f8d95d34f
mei mei [Tue, 12 Jun 2018 03:39:38 +0000 (03:39 +0000)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Merge "[Dovetail] Setting correct process name for rabbitmq on Apex"
- [Dovetail] Setting correct process name for rabbitmq on Apex
Customizing the pod.yaml for running the dovetail.ha.rabbitmq test on
Apex.
Change-Id: I945d281bb8aac2799dd0ff0aa4a750cbf44803de
Signed-off-by: Georg Kunz <georg.kunz@ericsson.com>
Cédric Ollivier [Sun, 10 Jun 2018 12:00:22 +0000 (14:00 +0200)]
Update git submodules
* Update docs/submodules/functest from branch 'stable/fraser'
- Update cloudify-rest-client to 4.3.2
Change-Id: I8ac0becb57897233c2a12781dc022d9fdfd32f85
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
(cherry picked from commit
776eccccedbd560e8be332504bfa3cdfcbdc66e3)
Cédric Ollivier [Sat, 9 Jun 2018 12:47:51 +0000 (14:47 +0200)]
Update git submodules
* Update docs/submodules/functest from branch 'stable/fraser'
- Select the right quaff repo
Change-Id: I0aa090bf1f8c6220918ebc1b041bab4a43d444b5
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
(cherry picked from commit
759cd4bb92e171b16af5c6c1206352b92096d596)
- Force unf_ext 0.0.7.4
Else it cannot compile vs arm [1][2]
[1] https://build.opnfv.org/ci/job/functest-vnf-docker-build-arm64-master/231/console
[2] https://github.com/sile/unf/pull/2/commits/
74ed3e3b1ec31474cf9b8d8a90aee535607fdfe8
Change-Id: I8b0890c3b7a2a148975635c0f4eafbcc5568fc00
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
(cherry picked from commit
e9b5f08ddbdfefd6cbdf226a10b79b2349c4c86b)
- Stop using a forked obsolete repo
It leverages on the official clearwater live test instead.
It now parses the output directly.
Conflicts:
docker/vnf/Dockerfile
Change-Id: Ia7746c13362323daf72b3536d294401f0b7ae42f
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
(cherry picked from commit
0c55898253147b8fb6e5ef1afbf6f462a5b343b5)
spisarski [Mon, 4 Jun 2018 15:23:53 +0000 (09:23 -0600)]
Update git submodules
* Update docs/submodules/snaps from branch 'stable/fraser'
- Fix to a router's internal subnet resoulution.
Ensures that any subnet added to the router is available to that project.
Change-Id: Iddfad14a093551bc0f4a05c52b20f02db2474d78
Signed-off-by: spisarski <s.pisarski@cablelabs.com>
Tim Rozet [Fri, 8 Jun 2018 12:13:55 +0000 (12:13 +0000)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Merge "Stop hardcoding Docker repository"
- Stop hardcoding Docker repository
Change-Id: I7c8a131b4f80b58ee136e63c547c4fe55822a134
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
wutianwei [Wed, 6 Jun 2018 10:50:33 +0000 (06:50 -0400)]
Update git submodules
* Update docs/submodules/container4nfv from branch 'stable/fraser'
- fix istio deploy fialure
Some files don't exist in istio 0.8.0 version.
So it failed to deploy istio in CI.
what this patch do:
1. using istio-demo.yml instead of istio.yml to deploy istio
2. define the ingress gateway when running bookinfo sample
3. rename ingress to ingressgateway
Change-Id: I39ec39320d61e5af8282c6f50bad90240444bc79
Signed-off-by: wutianwei <wutianwei1@huawei.com>
(cherry picked from commit
f5e9d072a9d4d896a9da40dbfef8a5ca9abd7924)
Alexandru Avadanii [Thu, 7 Jun 2018 11:59:59 +0000 (13:59 +0200)]
Update git submodules
* Update docs/submodules/fuel from branch 'stable/fraser'
- [patch] Rebase APT keyserver proxy support patch
Sync our patch with upstream PR [1].
[1] https://github.com/salt-formulas/salt-formula-linux/pull/138
Change-Id: If3a51d3aef51accee0901c59e1342b42dbe4be4b
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
(cherry picked from commit
78d368731c9582361cc291d5618e01702982f2b9)
Periyasamy Palanisamy [Thu, 7 Jun 2018 14:34:00 +0000 (14:34 +0000)]
Update git submodules
* Update docs/submodules/sdnvpn from branch 'stable/fraser'
- Merge "Re-enabling execution of tempest tests" into stable/fraser
- Re-enabling execution of tempest tests
My previous patch broke the execution of tempest tests, causing tempest
to complain about a missing .testr.conf file. This fix adds the explicit
use of the --config-file CLI flag back to the tempest test framework.
Change-Id: If65c65a227f0058180e0d5bca47cce502948c4c9
Signed-off-by: Georg Kunz <georg.kunz@ericsson.com>
(cherry picked from commit
1fc59dc868766cc845ecf2a2b7f1fef853d2d7e5)
Periyasamy Palanisamy [Thu, 7 Jun 2018 08:35:48 +0000 (10:35 +0200)]
Update git submodules
* Update docs/submodules/sdnvpn from branch 'stable/fraser'
- Add own logger for SdnvpnFuncTest class
The functest xtesting Testcase class removed the logger instance
variable, so let SdnvpnFuncTest use its own logger.
JIRA: SDNVPN-215
Change-Id: I8b611273e44204d5051fad1140e6ecaddc2a4334
Signed-off-by: Periyasamy Palanisamy <periyasamy.palanisamy@ericsson.com>
(cherry picked from commit
6491326ffadcc143a64723169038cad58620f117)
Trevor Bramwell [Thu, 7 Jun 2018 14:03:08 +0000 (14:03 +0000)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Merge "Use armband project for deploy in auto"
- Use armband project for deploy in auto
Change-Id: I76dabebfd696c9b307399e1906740df823b4d91c
Signed-off-by: Paul Vaduva <Paul.Vaduva@enea.com>
Alexandru Avadanii [Thu, 7 Jun 2018 13:45:41 +0000 (15:45 +0200)]
Update git submodules
* Update docs/submodules/armband from branch 'stable/fraser'
- u/fuel: Bump & rebase for keyserver prx refresh
Change-Id: If00a793dccfa6f779a6e2481b41ebec6bbdda39c
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
(cherry picked from commit
d5748bc0dd2fe4241a3924192d6beac860238551)
Ryota Mibu [Thu, 7 Jun 2018 11:11:22 +0000 (11:11 +0000)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Merge "Clean up CI Node Listing for pushing test logs"
- Clean up CI Node Listing for pushing test logs
These machines have been removed from Jenkins for quite some time and
no longer need to be listed here.
Change-Id: I43943865eb83eccdf26effe916d6c2ac010f402f
Signed-off-by: Trevor Bramwell <tbramwell@linuxfoundation.org>
Aric Gardner [Wed, 6 Jun 2018 19:58:18 +0000 (19:58 +0000)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Merge "Deploy job needs armband project for deploy"
- Deploy job needs armband project for deploy
Change-Id: Iae34d2b9249614b5a4b27173eff3b64779a96c49
Signed-off-by: pava <Paul.Vaduva@enea.com>
Aric Gardner [Wed, 6 Jun 2018 19:48:41 +0000 (19:48 +0000)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Merge "Remove INFO file as we've migrated to INFO.yaml"
- Remove INFO file as we've migrated to INFO.yaml
Change-Id: I69fc68e101db5b83a56e392924d6e1e656fa1b5e
Signed-off-by: Trevor Bramwell <tbramwell@linuxfoundation.org>
Michael Polenchuk [Wed, 6 Jun 2018 10:26:36 +0000 (14:26 +0400)]
Update git submodules
* Update docs/submodules/fuel from branch 'stable/fraser'
- Pin OVN packages
Make a pinning of OVN packages as well to meet an openvswitch dependency.
Change-Id: I96ac7e052c710b65fc1f74bc4f406bba435d433f
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
Ryota MIBU [Wed, 6 Jun 2018 14:58:10 +0000 (23:58 +0900)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- [doctor] pass inspector value to parameter
Change-Id: I56e4e8e00840e46efe5fe52812fd949ee08f984a
Cédric Ollivier [Wed, 6 Jun 2018 07:28:38 +0000 (09:28 +0200)]
Update git submodules
* Update docs/submodules/functest from branch 'stable/fraser'
- Switch to Python3 divide in cloudify_ims
The code simply asks for python3 divide else only live_test = 100% is
considered as successful [1].
[1] https://build.opnfv.org/ci/view/functest/job/functest-apex-baremetal-daily-fraser/169/console
Change-Id: I84690d20791cd3d6a68823eec40f0e4b0f876b72
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
(cherry picked from commit
f7b6a9a8d69313bbb8203eaf25b2d78d86ae799c)
- Switch from OS_ENDPOINT_TYPE to OS_INTERFACE
It also set endpoint_type to public in tempest.conf if unset.
JIRA: FUNCTEST-975
Change-Id: I91bd1d7171b4bcf58dbe818696d5b864d5036619
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
(cherry picked from commit
4f9789cfab845d7209f5a2fc2209cad8941d02d6)
Cédric Ollivier [Tue, 5 Jun 2018 18:29:04 +0000 (20:29 +0200)]
Update git submodules
* Update docs/submodules/functest from branch 'stable/fraser'
- Return true if at least one passed test
JIRA: FUNCTEST-974
Change-Id: I9915dbb91516baf5307a577c41ede5dca51a2f07
Signed-off-by: Cédric Ollivier <cedric.ollivier@orange.com>
(cherry picked from commit
d77a8c4158562dea02500a7b6240b4934ab4fc7c)
Tim Rozet [Tue, 5 Jun 2018 16:54:49 +0000 (12:54 -0400)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Apex: Fix missed updating nosdn verify scenario
Change-Id: If9e612b24fca868c3b330a03053accc7debf9420
Signed-off-by: Tim Rozet <trozet@redhat.com>
Panagiotis Karalis [Fri, 25 May 2018 08:53:57 +0000 (11:53 +0300)]
Update git submodules
* Update docs/submodules/sfc from branch 'stable/fraser'
- Fix the logging to be compatible with functest
In order to collect logs from SFC test scenarios running through
functest framework (mainly for troubleshooting purposes),
the logging mechanism has been updated accordingly.
JIRA: SFC-125
Change-Id: Ide7c32519afa6ece299d0ac1dcb168609a2e3945
Signed-off-by: Panagiotis Karalis <pkaralis@intracom-telecom.com>
Tim Rozet [Tue, 5 Jun 2018 13:40:50 +0000 (09:40 -0400)]
Update git submodules
* Update docs/submodules/releng from branch 'master'
- Apex: Change verify job to use tempest
Tempest is maintained for different versions of openstack which we need
to be able to test master and queens in Apex for XCI.
Change-Id: I1ab6500964a93b74f1800e9bdfea9ddfb1157f70
Signed-off-by: Tim Rozet <trozet@redhat.com>
Dimitrios Markou [Fri, 1 Jun 2018 13:09:47 +0000 (16:09 +0300)]
Update git submodules
* Update docs/submodules/sdnvpn from branch 'stable/fraser'
- [Bug Fix] Use correct image for the Quagga instance
In testcase_3 the Quagga image is downloaded from the
opnfv.artifacts repository to the /home/opnfv/functest/data
directory.
But the testcase_3 after that tries to find the image in the
/home/opnfv/functest/images directory.
This results in using a wrong image
Jira: SDNVPN-213
Change-Id: I99539fc9a7a2d016a97ed51fca0cde81f82b3911
Signed-off-by: Dimitrios Markou <mardim@intracom-telecom.com>
Michael Polenchuk [Tue, 5 Jun 2018 12:54:02 +0000 (16:54 +0400)]
Update git submodules
* Update docs/submodules/fuel from branch 'stable/fraser'
- Clean out merged upstream patch
Change-Id: I0c8f87bad0fbe55684bd43547674ed91a31f39f8
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
(cherry picked from commit
5ab2540591ad029b5b6cf23eab88959fbd14712b)
Alexandru Avadanii [Mon, 4 Jun 2018 15:57:06 +0000 (15:57 +0000)]
Update git submodules
* Update docs/submodules/fuel from branch 'stable/fraser'
- Merge "[patch] Drop upstream reclass formula patches" into stable/fraser
- [patch] Drop upstream reclass formula patches
Change-Id: Iad2a27d059b43ed14fb70bdee01b3db29613615b
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
(cherry picked from commit
28ccbe4f37cf8b2e38681d4a732f80112888ce84)
Alexandru Avadanii [Mon, 4 Jun 2018 14:02:21 +0000 (16:02 +0200)]
Update git submodules
* Update docs/submodules/fuel from branch 'stable/fraser'
- [submodule] Bump Pharos for ericsson-pod1 updates
This bump also brings in:
- arm-pod{8,9} config;
- UNH lab config;
- NTP config in IDFs for existing PODs;
- basic vPDF support;
Change-Id: Ifc16616bc8a13de2bdf048971448d4853e93880e
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
(cherry picked from commit
4ee7da0aa1128569bc97e5a28ce10a3ce1aac142)
Alexandru Avadanii [Mon, 4 Jun 2018 13:46:04 +0000 (15:46 +0200)]
Update git submodules
* Update docs/submodules/armband from branch 'stable/fraser'
- u/fuel: Bump & rebase for upstream patches
Change-Id: Ie25c098273b929e9a31adfcfd3eb95dcf856611a
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
(cherry picked from commit
baa15e4501d47adb80b1648d059881bdf57b2a9d)
Alexandru Avadanii [Mon, 4 Jun 2018 12:13:14 +0000 (12:13 +0000)]
Update git submodules
* Update docs/submodules/fuel from branch 'stable/fraser'
- Merge "Pin openvswitch packages from UCA" into stable/fraser
- Pin openvswitch packages from UCA
Make a pinning of openvswitch packages to get 2.8.1 version.
Change-Id: I2bb78050cebd671ef1dddbac02705e0782fc34c8
Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>