From: Samantha Jian-Pielak Date: Mon, 1 Feb 2016 19:38:06 +0000 (-0800) Subject: Modify install guide and add the post install guide. X-Git-Tag: brahmaputra.1.0~4 X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=commitdiff_plain;h=refs%2Fchanges%2F55%2F10655%2F1;p=joid.git Modify install guide and add the post install guide. Change-Id: If5fd6cec8d974855f397c76acb1bb4c97955fba7 (cherry picked from commit c900d005ff0fafd4e35afce238f20214782fbb01) --- diff --git a/docs/configguide/installerconfig.rst b/docs/configguide/installerconfig.rst index e1b9ac33..36ae63db 100644 --- a/docs/configguide/installerconfig.rst +++ b/docs/configguide/installerconfig.rst @@ -2,13 +2,15 @@ Deploy JOID in your LAB ======================= + + Bare Metal Installations: ^^^^^^^^^^^^^^^^^^^^^^^^^ Requirements as per Pharos: ^^^^^^^^^^^^^^^^^^^^^^^^^^^ Networking: ^^^^^^^^^^^ -**minimum 2 networks** +**Minimum 2 networks** | ``1. First for Admin network with gateway to access external network`` | ``2. Second for public network to consume by tenants for floating ips`` @@ -16,10 +18,9 @@ Networking: **NOTE: JOID support multiple isolated networks for data as well as storage. Based on your network options for Openstack.** -Minimum 6 physical servers. -~~~~~~~~~~~~~~~~~~~~~~~~~~~ -1. Jump Host server: -~~~~~~~~~~~~~~~~~~~~ +**Minimum 6 physical servers** + +1. Jump host server: | ``  Minimum H/W Spec needed`` | ``  CPU cores: 16`` @@ -27,8 +28,7 @@ Minimum 6 physical servers. | ``  Hard Disk: 1(250 GB)`` | ``  NIC: eth0(Admin, Management), eth1 (external network)`` -2. Control Node Servers (minimum 3): -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +2. Control node servers (minimum 3): | ``  Minimum H/W Spec`` | ``  CPU cores: 16`` @@ -36,8 +36,7 @@ Minimum 6 physical servers. | ``  Hard Disk: 1(500 GB)`` | ``  NIC: eth0(Admin, Management), eth1 (external network)`` -3. Compute Node Servers (minimum 2): -~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +3. Compute node servers (minimum 2): | ``  Minimum H/W Spec`` | ``  CPU cores: 16`` @@ -50,7 +49,7 @@ the Openstack please consider higher spec for each nodes.** Make sure all servers are connected to top of rack switch and configured accordingly. No DHCP server should be up and configured. Only gateway at eth0 and eth1 network should be configure to access the network outside your lab. -Jump Node configuration: +Jump node configuration: ~~~~~~~~~~~~~~~~~~~~~~~~ 1. Install Ubuntu 14.04 LTS server version of OS on the nodes. @@ -112,6 +111,11 @@ deployment.yaml file Prerequisite: ~~~~~~~~~~~~~ +1. Make sure Jump host node has been configured with bridges on each interface, +so that appropriate MAAS and JUJU bootstrap VM can be created. For example if +you have three network admin, data and public then I would suggest to give names +like brAdm, brData and brPublic. +2. You have information about the node MAC address and power management details (IPMI IP, username, password) of the nodes used for control and compute node. modify deployment.yaml ^^^^^^^^^^^^^^^^^^^^^^ @@ -165,11 +169,6 @@ used as separate data network for tenants in openstack with network | ``       enableautomodebyname eth2 AUTO "10.4.9.0/24" control || true`` | ``       ;;`` -Deployment of OPNFV using JOID: -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -Once you have done the change in above section then run the following -commands to do the automatic deployments. MAAS Install ~~~~~~~~~~~~ @@ -180,52 +179,111 @@ commands to start the MAAS deployment. ``   ./02-maasdeploy.sh intelpod7`` +This will take approximately 40 minutes to couple hours depending on your +environment. This script will do the following: + +1. Create 2 VMs (KVM). +2. Install MAAS in one of the VMs. +3. Configure the MAAS to enlist and commission a VM for Juju bootstrap node. +4. Configure the MAAS to enlist and commission bare metal servers. + +When it's done, you should be able to view MAAS webpage (http:///MAAS) and see 1 bootstrap node and bare metal servers in the 'Ready' state on the nodes page. + +Virtual deployment +~~~~~~~~~~~~~~~~~~ +By default, just running the script ./02-maasdeploy.sh will automatically create the KVM VMs on a single machine and configure everything for you. + OPNFV Install -~~~~~~~~~~~~~ +------------- +JOID allows you to deploy different combinations of OpenStack release and SDN solution in HA or non-HA mode. + +For OpenStack, it supports Juno and Liberty. For SDN, it supports Openvswitch, OpenContrail, OpenDayLight and ONOS. + +In addition to HA or non-HA mode, it also supports to deploy the latest from the development tree (tip). + + +The deploy.sh in the joid/ci directoy will do all the work for you. For example, the following deploy OpenStack Libery with OpenDayLight in a HA mode in the Intelpod7. + | ``   ./deploy.sh -o liberty -s odl -t ha -l intelpod7 -f none`` | ``   `` -NOTE: Possible options are as follows: - -| ``   choose which sdn controller to use.`` -| ``     [-s ``\ \ ``]`` -| ``     nosdn: openvswitch only and no other SDN.`` -| ``     odl: OpenDayLight Lithium version.`` -| ``     opencontrail: OpenContrail SDN can be installed with Juno Openstack today.`` -| ``     onos: ONOS framework as SDN.`` -| ``     `` -| ``     [-t ``\ \ ``] `` -| ``     nonha: NO HA mode of Openstack`` -| ``     ha: HA mode of openstack.`` -| ``     [-o ``\ \ ``]`` -| ``     juno: Juno Openstack`` -| ``     liberty: Liberty version of openstack.`` -| ``     [-l ``\ \ ``] etc...`` -| ``     default: For virtual deployment where installation will be done on KVM created using ./02-maasdeploy.sh`` -| ``     intelpod5: Install on bare metal OPNFV pod5 of Intel lab.`` -| ``     intelpod6`` -| ``     orangepod2`` -| ``     ..`` -| ``     ..`` -| ``     ``\ \ ``: if you make changes as per your pod above then please use that.`` -| ``     [-f ``\ \ ``]`` -| ``     none: no special feature will be enabled.`` -| ``     ipv6: ipv6 will be enabled for tenant in openstack.`` -| ``     `` +By default, the SDN is Openvswitch, non-HA, Liberty, Intelpod5, OPNFV Brahmaputra release and ODL_L2 for the OPNFV feature. + +Possible options for each choice are as follows: + +| ``   [-s ``\ \ ``]`` +| ``   nosdn: openvswitch only and no other SDN.`` +| ``   odl: OpenDayLight Lithium version.`` +| ``   opencontrail: OpenContrail SDN.`` +| ``   onos: ONOS framework as SDN.`` +| ``   `` +| ``   [-t ``\ \ ``] `` +| ``   nonha: NO HA mode of Openstack.`` +| ``   ha: HA mode of openstack.`` +| ``    tip: the tip of the development.`` +| ``   `` +| ``   [-o ``\ \ ``]`` +| ``   juno: OpenStack Juno version.`` +| ``   liberty: OpenStack Liberty version.`` +| ``   `` +| ``   [-l ``\ \ ``] etc...`` +| ``   default: For virtual deployment where installation will be done on KVM created using ./02-maasdeploy.sh`` +| ``   intelpod5: Install on bare metal OPNFV pod5 of Intel lab.`` +| ``   intelpod6`` +| ``   orangepod2`` +| ``   ..`` +| ``   (other pods)`` +| ``   Note: if you make changes as per your pod above then please use your pod.`` +| ``   `` +| ``   [-f ``\ \ ``]`` +| ``   none: no special feature will be enabled.`` +| ``   ipv6: ipv6 will be enabled for tenant in openstack.`` +| ``   `` -Troubleshoot -~~~~~~~~~~~~ By default debug is enabled in script and error messages will be printed -on ssh terminal where you are running the scripts. +on the SSH terminal where you are running the scripts. +It could take an hour to couple hours (max) to complete. + +Is the deployment done successfully? +------------------------------------ +Once juju-deployer is complete, use juju status to verify that all deployed unit are in the ready state. + +| ``   juju status --format tabular`` + +Find the Openstack-dashboard IP address from the *juju status* output, and see if you can log in via browser. The username and password is admin/openstack. + +Optionall, see if you can log in Juju GUI. Juju GUI is on the Juju bootstrap node which is the second VM you define in the 02-maasdeploy.sh. The username and password is admin/admin. -To access of any control or compute nodes. juju ssh for example to login -into openstack-dashboard container. +If you deploy ODL, OpenContrail or ONOS, find the IP address of the web UI and login. Please refer to each SDN bundle.yaml for username/password. + +Troubleshoot +~~~~~~~~~~~~ +To access to any deployed units, juju ssh for example to login into nova-compute unit and look for /var/log/juju/unit- for more info. -| ``   juju ssh openstack-dashboard/0 `` | ``   juju ssh nova-compute/0`` -| ``   juju ssh neutron-gateway/0`` -By default juju will add the Ubuntu user keys for authentication into -the deployed server and only ssh access will be available. +Example: + +| ``   ubuntu@R4N4B1:~$ juju ssh nova-compute/0`` +| ``   Warning: Permanently added '172.16.50.60' (ECDSA) to the list of known hosts.`` +| ``   Warning: Permanently added '3-r4n3b1-compute.maas' (ECDSA) to the list of known hosts.`` +| ``   Welcome to Ubuntu 14.04.1 LTS (GNU/Linux 3.13.0-77-generic x86_64)`` +| ``   `` +| ``    * Documentation: https://help.ubuntu.com/`` +| ``   `` +| ``   Last login: Tue Feb 2 21:23:56 2016 from bootstrap.maas`` +| ``   ubuntu@3-R4N3B1-compute:~$ sudo -i`` +| ``   root@3-R4N3B1-compute:~# cd /var/log/juju/`` +| ``   root@3-R4N3B1-compute:/var/log/juju# ls`` +| ``   machine-2.log unit-ceilometer-agent-0.log unit-ceph-osd-0.log unit-neutron-contrail-0.log unit-nodes-compute-0.log unit-nova-compute-0.log unit-ntp-0.log`` +| ``   root@3-R4N3B1-compute:/var/log/juju#`` + +**By default juju will add the Ubuntu user keys for authentication into +the deployed server and only ssh access will be available.** + +Once you resolve the error, go back to the jump host to rerun the charm hook with: + +| ``   juju resolved --retry `` + diff --git a/docs/configguide/postinstall.rst b/docs/configguide/postinstall.rst index 1702cea5..7d7c753b 100644 --- a/docs/configguide/postinstall.rst +++ b/docs/configguide/postinstall.rst @@ -1,26 +1,23 @@ - post installation procedures -====================================== -Add a brief introduction to the methods of validating the installation -according to this specific installer or feature. +JOID post installation procedures +================================= -Automated post installation activities --------------------------------------- -Describe specific post installation activities performed by the OPNFV -deployment pipeline including testing activities and reports. Refer to -the relevant testing guides, results, and release notes. +Configure OpenStack +------------------- +In each SDN directory, for example joid/ci/opencontrail, there is a folder +for Juju deployer where you can find the charm bundle yaml files that the +deploy.sh uses to deploy. -note: this section should be singular and derived from the test projects -once we have one test suite to run for all deploy tools. This is not the -case yet so each deploy tool will need to provide (hopefully very simillar) -documentation of this. +In the same directory, there is **scripts** folder where you can find shell +scripts to help you configure the OpenStack cloud that you just deployed. These +scripts are created to help you configure a basic OpenStack Cloud to verify +the cloud. For more info on OpenStack Cloud configuration, please refer to the +OpenStack Cloud Administrator Guide on docs.openstack.org. Similarly, for +complete SDN configuration, please refer to the respective SDN adminstrator guide. + +Each SDN solution requires slightly different setup, please refer to the **README** +in each SDN folder. Most likely you will need to modify the **openstack.sh** +and **cloud-setup.sh** scripts for the floating IP range, private IP network, +and SSH keys. Please go through **openstack.sh**, **glance.sh** and +**cloud-setup.sh** and make changes as you see fit. - post configuration procedures --------------------------------------- -Describe any deploy tool or feature specific scripts, tests or procedures -that should be carried out on the deployment post install and configuration -in this section. -Platform components validation ---------------------------------- -Describe any component specific validation procedures necessary for your -deployment tool in this section. diff --git a/docs/installation-instructions.rst b/docs/installation-instructions.rst deleted file mode 100644 index e69de29b..00000000