From: Stefan K. Berg <stefan.k.berg@ericsson.com>
Date: Tue, 12 May 2015 16:16:46 +0000 (+0200)
Subject: DHA hardware config for LF pod1
X-Git-Tag: arno.2015.1.0~49
X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=commitdiff_plain;h=refs%2Fchanges%2F27%2F527%2F1;p=genesis.git

DHA hardware config for LF pod1

Adding the dha.yaml for the lab setup.

JIRA

Change-Id: Ie9cb582dcd35256acd72ffed55f4a4db36662725
Signed-off-by: Stefan K. Berg <stefan.k.berg@ericsson.com>
---

diff --git a/fuel/prototypes/auto-deploy/configs/lf_pod1/dha.yaml b/fuel/prototypes/auto-deploy/configs/lf_pod1/dha.yaml
new file mode 100644
index 0000000..9d02f5c
--- /dev/null
+++ b/fuel/prototypes/auto-deploy/configs/lf_pod1/dha.yaml
@@ -0,0 +1,66 @@
+title: Deployment Hardware Adapter (DHA)
+# DHA API version supported
+version: 1.1
+created: Fri May  8 08:03:49 UTC 2015
+comment: Config for LF Pod1
+
+# Adapter to use for this definition
+adapter: ipmi
+
+# Node list.
+# Mandatory properties are id and role.
+# The MAC address of the PXE boot interface for Fuel is not
+# mandatory to be defined.
+# All other properties are adapter specific.
+
+nodes:
+- id: 1
+  pxeMac: 00:25:b5:b0:00:ef
+  ipmiIp: 172.30.8.69
+  ipmiUser: admin
+  ipmiPass: octopus
+- id: 2
+  pxeMac: 00:25:b5:b0:00:cf
+  ipmiIp: 172.30.8.78
+  ipmiUser: admin
+  ipmiPass: octopus
+- id: 3
+  pxeMac: 00:25:b5:b0:00:8f
+  ipmiIp: 172.30.8.68
+  ipmiUser: admin
+  ipmiPass: octopus
+- id: 4
+  pxeMac: 00:25:b5:b0:00:6f
+  ipmiIp: 172.30.8.77
+  ipmiUser: admin
+  ipmiPass: octopus
+- id: 5
+  pxeMac: 00:25:b5:b0:00:4f
+  ipmiIp: 172.30.8.67
+  ipmiUser: admin
+  ipmiPass: octopus
+# Adding the Fuel node as node id 6 which may not be correct - please
+# adjust as needed.
+- id: 6
+  pxeMac: 52:54:00:dd:9c:43
+  libvirtName: fuel-opnfv
+  isFuel: yes
+
+# Deployment power on strategy
+# all:      Turn on all nodes at once. There will be no correlation
+#           between the DHA and DEA node numbering. MAC addresses
+#           will be used to select the node roles though.
+# sequence: Turn on the nodes in sequence starting with the lowest order
+#           node and wait for the node to be detected by Fuel. Not until
+#           the node has been detected and assigned a role will the next
+#           node be turned on.
+powerOnStrategy: sequence
+
+# If fuelCustomInstall is set to true, Fuel is assumed to be installed by
+# calling the DHA adapter function "dha_fuelCustomInstall()"  with two
+# arguments: node ID and the ISO file name to deploy. The custom install
+# function is then to handle all necessary logic to boot the Fuel master
+# from the ISO and then return.
+# Allowed values: true, false
+
+fuelCustomInstall: true