# Use Case Description: A single-node simple python web server, connected to
# two internal networks (private and admin), and accessible via a floating IP.
# Based upon the OpenStack Tacker project's "tosca-vnfd-hello-world" blueprint,
-# as extended for testing of more Tacker-supported features as of OpenStack
+# as extended for testing of more Tacker-supported features as of OpenStack
# Newton.
#
-# Prerequisites:
-# This test can be run in either an OPNFV environment, or a plain OpenStack
-# environment (e.g. Devstack).
-# For Devstack running in a VM on the host, you must first enable the host to
-# access the VMs running under Devstack:
-# 1) In devstack VM:
+# Prerequisites:
+# This test can be run in either an OPNFV environment or a plain OpenStack
+# environment (e.g. DevStack).
+# For Devstack running in a VM on the host, you must first enable the host to
+# access the VMs running under DevStack:
+# 1) In Devstack VM:
# $ sudo iptables -t nat -A POSTROUTING -o ens3 -j MASQUERADE
# Sub the primary interface of your devstack VM for ens3, as needed.
-# 2) On the host (e.g linux):
+# 2) On the host (e.g linux):
# $ sudo route add -net 172.24.0.0/16 gw 192.168.122.112
-# Sub your devstack Public network subnet for 172.24.0.0/16, and
-# your devstack VM IP address on the host for 192.168.122.112
-# Also you may need to ensure that nested virtualization is enabled, e.g. in
-# virt-manager, enable "Copy host CPU confguraton" for the devstack VM.
+# Sub your devstack Public network subnet for 172.24.0.0/16, and
+# your Devstack VM IP address on the host for 192.168.122.112
+# Also you may need to ensure that nested virtualization is enabled, e.g. in
+# virt-manager, enable "Copy host CPU confguraton" for the Devstack VM.
#
# For OPNFV-based tests, prerequisites are
# 1) models-joid-001 | models-apex-001 (installation of OPNFV system)
# 4) bash vHello_Tacker.sh clean
# TODO: add assertions
#
-# Post-State:
-# After step 1, Tacker is installed and active in a docker container, and the
+# Post-State:
+# After step 1, Tacker is installed and active in a docker container, and the
# test blueprint etc are prepared in a shared virtual folder /opt/tacker.
# After step 2, the VNF is running and verified.
# After step 3, the VNF is deleted and the system returned to step 1 post-state.
assert() {
if [[ $2 == true ]]; then echo "$0 test assertion passed: $1"
- else
+ else
echo "$0 test assertion failed: $1"
fail
fi
get_floating_net () {
network_ids=($(neutron net-list|grep -v "+"|grep -v name|awk '{print $2}'))
- for id in ${network_ids[@]}; do
+ for id in "${network_ids[@]}"; do
[[ $(neutron net-show ${id}|grep 'router:external'|grep -i "true") != "" ]] && FLOATING_NETWORK_ID=${id}
done
if [[ $FLOATING_NETWORK_ID ]]; then
try () {
count=$1
$3
- while [[ $? == 1 && $count > 0 ]]; do
+ while [[ $? == 1 && $count -gt 0 ]]; do
sleep $2
let count=$count-1
$3
trap 'fail' ERR
echo "$0: $(date) Setup shared test folder /opt/tacker"
- if [ -d /opt/tacker ]; then sudo rm -rf /opt/tacker; fi
+ if [ -d /opt/tacker ]; then sudo rm -rf /opt/tacker; fi
sudo mkdir -p /opt/tacker
sudo chown $USER /opt/tacker
chmod 777 /opt/tacker/
# For devstack, set in local.conf per http://docs.openstack.org/developer/devstack/guides/neutron.html
# Q_ML2_PLUGIN_EXT_DRIVERS=port_security
+
dist=`grep DISTRIB_ID /etc/*-release | awk -F '=' '{print $2}'`
if [ "$dist" == "Ubuntu" ]; then
- dpkg -l juju
- if [[ $? -eq 0 ]]; then
- echo "$0: $(date) JOID workaround for Colorado - enable ML2 port security"
- juju set neutron-api enable-ml2-port-security=true
- fi
-
echo "$0: $(date) Execute tacker-setup.sh in the container"
sudo docker exec -it tacker /bin/bash /opt/tacker/tacker-setup.sh setup $2
if [ $? -eq 1 ]; then fail; fi
if [ $? -eq 1 ]; then fail; fi
fi
- assert "models-tacker-001 (Tacker installation in a docker container on the jumphost)" true
+ assert "models-tacker-001 (Tacker installation in a docker container on the jumphost)" true
}
copy_blueprint() {
ssh-keygen -t rsa -N "" -f /opt/tacker/vHello -C ubuntu@vHello
chmod 600 /opt/tacker/vHello
openstack keypair create --public-key /opt/tacker/vHello.pub vHello
- assert "models-nova-001 (Keypair creation)" true
+ assert "models-nova-001 (Keypair creation)" true
echo "$0: $(date) Inject public key into blueprint"
pubkey=$(cat /opt/tacker/vHello.pub)
cd /opt/tacker/blueprints/tosca-vnfd-hello-world-tacker
# newton: NAME (was "--name") is now a positional parameter
tacker vnfd-create --vnfd-file blueprint.yaml hello-world-tacker
- if [[ $? -eq 0 ]]; then
+ if [[ $? -eq 0 ]]; then
assert "models-tacker-002 (VNFD creation)" true
else
assert "models-tacker-002 (VNFD creation)" false
while [[ -z $active && $count -gt 0 ]]
do
active=$(tacker vnf-show hello-world-tacker | grep ACTIVE)
- if [[ $(tacker vnf-show hello-world-tacker | grep -c ERROR) > 0 ]]; then
+ if [[ $(tacker vnf-show hello-world-tacker | grep -c ERROR) -gt 0 ]]; then
echo "$0: $(date) hello-world-tacker VNF creation failed with state ERROR"
assert "models-tacker-002 (VNF creation)" false
fi
sleep 30
echo "$0: $(date) wait for hello-world-tacker to go ACTIVE"
done
- if [[ $count == 0 ]]; then
+ if [[ $count == 0 ]]; then
echo "$0: $(date) hello-world-tacker VNF creation failed - timed out"
assert "models-tacker-002 (VNF creation)" false
fi
- assert "models-tacker-002 (VNF creation)" true
+ assert "models-tacker-002 (VNF creation)" true
# Setup for workarounds
echo "$0: $(date) directly set port security on ports (unsupported in Mitaka Tacker)"
# SERVER_ID=$(openstack stack resource list $HEAT_ID | awk "/VDU1 / { print \$4 }")
SERVER_ID=$(openstack server list | awk "/VDU1/ { print \$2 }")
id=($(neutron port-list|grep -v "+"|grep -v name|awk '{print $2}'))
- for id in ${id[@]}; do
+ for id in "${id[@]}"; do
if [[ $(neutron port-show $id|grep $SERVER_ID) ]]; then neutron port-update ${id} --port-security-enabled=True; fi
done
echo "$0: $(date) verify vHello server is running"
apt-get install -y curl
count=12
- while [[ $(curl $SERVER_URL | grep -c "Hello World") == 0 ]]
- do
+ while [[ $(curl $SERVER_URL | grep -c "Hello World") == 0 ]]
+ do
sleep 10
let count=$count-1
done
try 12 10 "tacker vnf-delete hello-world-tacker"
# It can take some time to delete a VNF - thus wait 2 minutes
count=12
- while [[ $count > 0 && "$(tacker vnf-list|grep hello-world-tacker|awk '{print $2}')" != '' ]]; do
+ while [[ $count -gt 0 && "$(tacker vnf-list|grep hello-world-tacker|awk '{print $2}')" != '' ]]; do
echo "$0: $(date) waiting for hello-world-tacker VNF delete to complete"
sleep 10
let count=$count-1
- done
+ done
if [[ "$(tacker vnf-list|grep hello-world-tacker|awk '{print $2}')" == '' ]]; then
assert "models-tacker-004 (VNF deletion)" true
else
# fi
# Cleanup for workarounds
- fip=($(neutron floatingip-list|grep -v "+"|grep -v id|awk '{print $2}')); for id in ${fip[@]}; do neutron floatingip-delete ${id}; done
+ fip=($(neutron floatingip-list|grep -v "+"|grep -v id|awk '{print $2}')); for id in "${fip[@]}"; do neutron floatingip-delete ${id}; done
sg=($(openstack security group list|grep vHello|awk '{print $2}'))
- for id in ${sg[@]}; do try 5 5 "openstack security group delete ${id}"; done
- kid=($(openstack keypair list|grep vHello|awk '{print $2}')); for id in ${kid[@]}; do openstack keypair delete ${id}; done
+ for id in "${sg[@]}"; do try 5 5 "openstack security group delete ${id}"; done
+ kid=($(openstack keypair list|grep vHello|awk '{print $2}')); for id in "${kid[@]}"; do openstack keypair delete ${id}; done
}
forward_to_container () {
Code Review / models.git / commitdiff