-#!/bin/bash\r
-# Copyright 2016 AT&T Intellectual Property, Inc\r
-#\r
-# Licensed under the Apache License, Version 2.0 (the "License");\r
-# you may not use this file except in compliance with the License.\r
-# You may obtain a copy of the License at\r
-#\r
-# http://www.apache.org/licenses/LICENSE-2.0\r
-#\r
-# Unless required by applicable law or agreed to in writing, software\r
-# distributed under the License is distributed on an "AS IS" BASIS,\r
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
-# See the License for the specific language governing permissions and\r
-# limitations under the License.\r
-#\r
-# What this is: Deployment test for the Tacker Hello World blueprint. \r
-#\r
-# Status: this is a work in progress, under test.\r
-#\r
-# How to use:\r
-# $ git clone https://gerrit.opnfv.org/gerrit/models\r
-# $ cd models/tests\r
-# $ bash vHello_Tacker.sh [tacker-cli|tacker-api] [setup|start|clean]\r
-# tacker-cli: use Tacker CLI\r
-# tacker-api: use Tacker RESTful API (not yet implemented)\r
-# setup: setup test environment\r
-# start: run test\r
-# clean: cleanup after test\r
-\r
-set -x\r
-\r
-pass() {\r
- echo "Hooray!"\r
- set +x #echo off\r
- exit 0\r
-}\r
-\r
-# Use this to trigger fail() at the right places\r
-# if [ "$RESULT" == "Test Failed!" ]; then fail; fi\r
-fail() {\r
- echo "Test Failed!"\r
- set +x\r
- exit 1\r
-}\r
-\r
-function get_floating_net () {\r
- network_ids=($(neutron net-list|grep -v "+"|grep -v name|awk '{print $2}'))\r
- for id in ${network_ids[@]}; do\r
- [[ $(neutron net-show ${id}|grep 'router:external'|grep -i "true") != "" ]] && floating_network_id=${id}\r
- done\r
- if [[ $floating_network_id ]]; then \r
- floating_network_name=$(openstack network show $floating_network_id | awk "/ name / { print \$4 }")\r
- else\r
- echo "$0: Floating network not found"\r
- exit 1\r
- fi\r
-}\r
-\r
-start() {\r
- echo "$0: reset blueprints folder"\r
- if [[ -d /tmp/tacker/blueprints/tosca-vnfd-hello-world-tacker ]]; then rm -rf /tmp/tacker/blueprints/tosca-vnfd-hello-world-tacker; fi\r
- mkdir -p /tmp/tacker/blueprints/tosca-vnfd-hello-world-tacker\r
-\r
- echo "$0: copy tosca-vnfd-hello-world-tacker to blueprints folder"\r
- cp -r blueprints/tosca-vnfd-hello-world-tacker /tmp/tacker/blueprints\r
- cd /tmp/tacker/blueprints/tosca-vnfd-hello-world-tacker\r
-\r
- echo "$0: setup OpenStack CLI environment"\r
- source /tmp/tacker/admin-openrc.sh\r
-\r
- echo "$0: Setup image_id"\r
- image_id=$(openstack image list | awk "/ models-xenial-server / { print \$2 }")\r
- if [ $image ]; then glance image-delete $image_id; fi\r
- glance --os-image-api-version 1 image-create --name models-xenial-server --disk-format qcow2 --location http://bkaj.net/opnfv/xenial-server-cloudimg-amd64-disk1.img --container-format bare\r
- \r
- if [[ "$1" == "tacker-api" ]]; then \r
- echo "$0: Tacker API use is not yet implemented"\r
- else\r
- # Tacker CLI use\r
- echo "$0: Get external network for Floating IP allocations"\r
-\r
-# echo "$0: Create Nova key pair"\r
-# mkdir -p ~/.ssh\r
-# nova keypair-delete vHello\r
-# nova keypair-add vHello > ~/.ssh/vHello.pem\r
-# chmod 600 ~/.ssh/vHello.pem\r
- \r
- echo "$0: create VNFD"\r
- tacker vnfd-create --vnfd-file tosca-vnfd-hello-world-tacker.yaml --name hello-world-tacker\r
- if [ $? -eq 1 ]; then fail; fi\r
-\r
- echo "$0: create VNF"\r
- tacker vnf-create --vnfd-name hello-world-tacker --name hello-world-tacker\r
- if [ $? -eq 1 ]; then fail; fi\r
- fi\r
- \r
- echo "$0: directly set port security on ports (bug/unsupported in Mitaka Tacker?)"\r
- HEAT_ID=$(tacker vnf-show hello-world-tacker | awk "/instance_id/ { print \$4 }")\r
- SERVER_ID=$(openstack stack resource list $HEAT_ID | awk "/VDU1 / { print \$4 }")\r
- id=($(neutron port-list|grep -v "+"|grep -v name|awk '{print $2}'))\r
- for id in ${id[@]}; do \r
- if [[ $(neutron port-show $id|grep $SERVER_ID) ]]; then neutron port-update ${id} --port-security-enabled=True; fi\r
- done\r
-\r
- echo "$0: directly assign security group (unsupported in Mitaka Tacker)"\r
- if [[ $(neutron security-group-list | awk "/ vHello / { print \$2 }") ]]; then neutron security-group-delete vHello; fi\r
- neutron security-group-create vHello\r
- neutron security-group-rule-create --direction ingress --protocol=TCP --port-range-min=22 --port-range-max=22 vHello\r
- neutron security-group-rule-create --direction ingress --protocol=TCP --port-range-min=80 --port-range-max=80 vHello\r
- openstack server add security group $SERVER_ID vHello\r
- openstack server add security group $SERVER_ID default\r
- \r
- echo "$0: associate floating IP"\r
- get_floating_net\r
- fip=$(neutron floatingip-create $floating_network_name | awk "/floating_ip_address/ { print \$4 }")\r
- nova floating-ip-associate $SERVER_ID $fip\r
- \r
- echo "$0: get vHello server address"\r
- SERVER_IP=$(openstack server show $SERVER_ID | awk "/ addresses / { print \$6 }")\r
- SERVER_URL="http://$SERVER_IP"\r
- \r
- echo "$0: start vHello web server"\r
- scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no start.sh opnfv:opnfv@$SERVER_IP:/home/opnfv\r
- ssh -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no opnfv:opnfv@$SERVER_IP "bash start.sh; exit"\r
-\r
- echo "$0: verify vHello server is running"\r
- if [[ $(curl $SERVER_URL | grep -c "Hello, World!") != 1 ]]; then fail; fi\r
-\r
- pass\r
-}\r
-\r
-clean() {\r
- echo "$0: setup OpenStack CLI environment"\r
- source /tmp/tacker/admin-openrc.sh\r
-\r
- if [[ "$1" == "tacker-api" ]]; then \r
- echo "$0: Tacker API use is not yet implemented"\r
- else \r
- echo "$0: uninstall vHello blueprint via CLI"\r
- tacker vnf-delete tosca-hello-world\r
- if [ $? -eq 1 ]; then fail; fi\r
- tacker vnfd-delete tosca-hello-world\r
- if [ $? -eq 1 ]; then fail; fi\r
- neutron security-group-delete vHello\r
- if [ $? -eq 1 ]; then fail; fi\r
- fip=($(neutron floatingip-list|grep -v "+"|grep -v id|awk '{print $2}')); for id in ${fip[@]}; do neutron floatingip-delete ${id}; done\r
- if [ $? -eq 1 ]; then fail; fi\r
- fi\r
- pass\r
-}\r
-\r
-if [[ "$2" == "setup" ]]; then\r
- echo "$0: Setup temp test folder /tmp/tacker and copy this script there"\r
- mkdir /tmp/tacker\r
- chmod 777 /tmp/tacker/\r
- cp $0 /tmp/tacker/.\r
- chmod 755 /tmp/tacker/*.sh\r
-\r
- echo "$0: tacker-setup part 1"\r
- bash utils/tacker-setup.sh $1 init\r
-\r
- echo "$0: tacker-setup part 2"\r
- CONTAINER=$(sudo docker ps -l | awk "/tacker/ { print \$1 }")\r
- sudo docker exec $CONTAINER /tmp/tacker/tacker-setup.sh $1 setup\r
- if [ $? -eq 1 ]; then fail; fi\r
- pass\r
-else\r
- if [[ $# -eq 3 ]]; then\r
- # running inside the tacker container, ready to go\r
- if [[ "$3" == "start" ]]; then start $1; fi\r
- if [[ "$3" == "clean" ]]; then clean $1; fi \r
- else\r
- echo "$0: pass $2 command to vHello.sh in tacker container"\r
- CONTAINER=$(sudo docker ps -a | awk "/tacker/ { print \$1 }")\r
- sudo docker exec $CONTAINER /tmp/tacker/vHello.sh $1 $2 $2\r
- if [ $? -eq 1 ]; then fail; fi\r
- pass\r
- fi\r
-fi\r
+#!/bin/bash
+# Copyright 2016 AT&T Intellectual Property, Inc
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+#
+# What this is: Deployment test for the Tacker Hello World blueprint.
+#
+# Status: this is a work in progress, under test.
+#
+# How to use:
+# $ git clone https://gerrit.opnfv.org/gerrit/models
+# $ cd models/tests
+# $ bash vHello_Tacker.sh [tacker-cli|tacker-api] [setup|start|clean]
+# tacker-cli: use Tacker CLI
+# tacker-api: use Tacker RESTful API (not yet implemented)
+# setup: setup test environment
+# start: run test
+# clean: cleanup after test
+
+set -x
+
+pass() {
+ echo "Hooray!"
+ set +x #echo off
+ exit 0
+}
+
+# Use this to trigger fail() at the right places
+# if [ "$RESULT" == "Test Failed!" ]; then fail; fi
+fail() {
+ echo "Test Failed!"
+ set +x
+ exit 1
+}
+
+function get_floating_net () {
+ network_ids=($(neutron net-list|grep -v "+"|grep -v name|awk '{print $2}'))
+ for id in ${network_ids[@]}; do
+ [[ $(neutron net-show ${id}|grep 'router:external'|grep -i "true") != "" ]] && floating_network_id=${id}
+ done
+ if [[ $floating_network_id ]]; then
+ floating_network_name=$(openstack network show $floating_network_id | awk "/ name / { print \$4 }")
+ else
+ echo "$0: Floating network not found"
+ exit 1
+ fi
+}
+
+start() {
+ echo "$0: reset blueprints folder"
+ if [[ -d /tmp/tacker/blueprints/tosca-vnfd-hello-world-tacker ]]; then rm -rf /tmp/tacker/blueprints/tosca-vnfd-hello-world-tacker; fi
+ mkdir -p /tmp/tacker/blueprints/tosca-vnfd-hello-world-tacker
+
+ echo "$0: copy tosca-vnfd-hello-world-tacker to blueprints folder"
+ cp -r blueprints/tosca-vnfd-hello-world-tacker /tmp/tacker/blueprints
+ cd /tmp/tacker/blueprints/tosca-vnfd-hello-world-tacker
+
+ echo "$0: setup OpenStack CLI environment"
+ source /tmp/tacker/admin-openrc.sh
+
+ echo "$0: Setup image_id"
+ image_id=$(openstack image list | awk "/ models-xenial-server / { print \$2 }")
+ if [ $image ]; then glance image-delete $image_id; fi
+ glance --os-image-api-version 1 image-create --name models-xenial-server --disk-format qcow2 --location http://bkaj.net/opnfv/xenial-server-cloudimg-amd64-disk1.img --container-format bare
+
+ if [[ "$1" == "tacker-api" ]]; then
+ echo "$0: Tacker API use is not yet implemented"
+ else
+ # Tacker CLI use
+ echo "$0: Get external network for Floating IP allocations"
+
+# echo "$0: Create Nova key pair"
+# mkdir -p ~/.ssh
+# nova keypair-delete vHello
+# nova keypair-add vHello > ~/.ssh/vHello.pem
+# chmod 600 ~/.ssh/vHello.pem
+
+ echo "$0: create VNFD"
+ tacker vnfd-create --vnfd-file tosca-vnfd-hello-world-tacker.yaml --name hello-world-tacker
+ if [ $? -eq 1 ]; then fail; fi
+
+ echo "$0: create VNF"
+ tacker vnf-create --vnfd-name hello-world-tacker --name hello-world-tacker
+ if [ $? -eq 1 ]; then fail; fi
+ fi
+
+ echo "$0: directly set port security on ports (bug/unsupported in Mitaka Tacker?)"
+ HEAT_ID=$(tacker vnf-show hello-world-tacker | awk "/instance_id/ { print \$4 }")
+ SERVER_ID=$(openstack stack resource list $HEAT_ID | awk "/VDU1 / { print \$4 }")
+ id=($(neutron port-list|grep -v "+"|grep -v name|awk '{print $2}'))
+ for id in ${id[@]}; do
+ if [[ $(neutron port-show $id|grep $SERVER_ID) ]]; then neutron port-update ${id} --port-security-enabled=True; fi
+ done
+
+ echo "$0: directly assign security group (unsupported in Mitaka Tacker)"
+ if [[ $(neutron security-group-list | awk "/ vHello / { print \$2 }") ]]; then neutron security-group-delete vHello; fi
+ neutron security-group-create vHello
+ neutron security-group-rule-create --direction ingress --protocol=TCP --port-range-min=22 --port-range-max=22 vHello
+ neutron security-group-rule-create --direction ingress --protocol=TCP --port-range-min=80 --port-range-max=80 vHello
+ openstack server add security group $SERVER_ID vHello
+ openstack server add security group $SERVER_ID default
+
+ echo "$0: associate floating IP"
+ get_floating_net
+ fip=$(neutron floatingip-create $floating_network_name | awk "/floating_ip_address/ { print \$4 }")
+ nova floating-ip-associate $SERVER_ID $fip
+
+ echo "$0: get vHello server address"
+ SERVER_IP=$(openstack server show $SERVER_ID | awk "/ addresses / { print \$6 }")
+ SERVER_URL="http://$SERVER_IP"
+
+ echo "$0: start vHello web server"
+ scp -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no start.sh opnfv:opnfv@$SERVER_IP:/home/opnfv
+ ssh -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no opnfv:opnfv@$SERVER_IP "bash start.sh; exit"
+
+ echo "$0: verify vHello server is running"
+ if [[ $(curl $SERVER_URL | grep -c "Hello, World!") != 1 ]]; then fail; fi
+
+ pass
+}
+
+clean() {
+ echo "$0: setup OpenStack CLI environment"
+ source /tmp/tacker/admin-openrc.sh
+
+ if [[ "$1" == "tacker-api" ]]; then
+ echo "$0: Tacker API use is not yet implemented"
+ else
+ echo "$0: uninstall vHello blueprint via CLI"
+ tacker vnf-delete tosca-hello-world
+ if [ $? -eq 1 ]; then fail; fi
+ tacker vnfd-delete tosca-hello-world
+ if [ $? -eq 1 ]; then fail; fi
+ neutron security-group-delete vHello
+ if [ $? -eq 1 ]; then fail; fi
+ fip=($(neutron floatingip-list|grep -v "+"|grep -v id|awk '{print $2}')); for id in ${fip[@]}; do neutron floatingip-delete ${id}; done
+ if [ $? -eq 1 ]; then fail; fi
+ fi
+ pass
+}
+
+if [[ "$2" == "setup" ]]; then
+ echo "$0: Setup temp test folder /tmp/tacker and copy this script there"
+ mkdir /tmp/tacker
+ chmod 777 /tmp/tacker/
+ cp $0 /tmp/tacker/.
+ chmod 755 /tmp/tacker/*.sh
+
+ echo "$0: tacker-setup part 1"
+ bash utils/tacker-setup.sh $1 init
+
+ echo "$0: tacker-setup part 2"
+ CONTAINER=$(sudo docker ps -l | awk "/tacker/ { print \$1 }")
+ sudo docker exec $CONTAINER /tmp/tacker/tacker-setup.sh $1 setup
+ if [ $? -eq 1 ]; then fail; fi
+ pass
+else
+ if [[ $# -eq 3 ]]; then
+ # running inside the tacker container, ready to go
+ if [[ "$3" == "start" ]]; then start $1; fi
+ if [[ "$3" == "clean" ]]; then clean $1; fi
+ else
+ echo "$0: pass $2 command to vHello.sh in tacker container"
+ CONTAINER=$(sudo docker ps -a | awk "/tacker/ { print \$1 }")
+ sudo docker exec $CONTAINER /tmp/tacker/vHello.sh $1 $2 $2
+ if [ $? -eq 1 ]; then fail; fi
+ pass
+ fi
+fi
Code Review / models.git / commitdiff