:Authors: Jonas Bjurel (Ericsson AB)
-:Version: 0.0.2
+:Version: 0.0.3
-================================================
-OPNFV Installation instructions for - Fuel@OPNFV
-================================================
+==================================================================================================
+OPNFV Installation instructions for the Arno release of OPNFV when using Fuel as a deployment tool
+==================================================================================================
Abstract
========
-This document describes how to install Fuel@OPNFV, it's dependencies and required system resources.
+This document describes how to install the Arno release of OPNFV when using Fuel as a deployment tool covering it's limitations, dependencies and required system resources.
License
=======
-Fuel@OPNFV DOCs (c) by Jonas Bjurel (Ericsson AB)
+Arno release of OPNFV when using Fuel as a deployment tool Docs (c) by Jonas Bjurel (Ericsson AB)
-Fuel@OPNFV DOCs are licensed under a Creative Commons Attribution 4.0 International License. You should have received a copy of the license along with this. If not, see <http://creativecommons.org/licenses/by/4.0/>.
+Arno release of OPNFV when using Fuel as a deployment tool Docs are licensed under a Creative Commons Attribution 4.0 International License. You should have received a copy of the license along with this. If not, see <http://creativecommons.org/licenses/by/4.0/>.
**Contents**
| 2015-04-23 | 0.0.2 | Jonas Bjurel | Minor changes |
| | | (Ericsson AB) | |
+--------------------+--------------------+--------------------+--------------------+
+| 2015-05-16 | 0.0.3 | Christopher Price | Minor changes |
+| | | (Ericsson AB) | |
++--------------------+--------------------+--------------------+--------------------+
2 Introduction
================
-This document describes the supported software and hardware configurations for the Fuel@OPNFV reference platform as well as providing guidelines on how to install and configure such reference system.
+This document describes the supported software and hardware configurations for the Arno release of OPNFV when using Fuel as a deployment tool as well as providing guidelines on how to install and configure such reference system.
Although the available installation options gives a high degree of freedom in how the system is set-up, with what architecture, services and features, etc., not nearly all of those permutations provides a OPNFV compliant reference architecture. Following the guidelines in this document ensures a result that is OPNFV R1 (Arno) compliant.
-The audience of this document is assumed to have good knowledge in network and Unix/Linux administration.
+The audience of this document is assumed to have good knowledge in networking and Unix/Linux administration.
3 Preface
===========
-Before starting the installation of Fuel@OPNFV, some planning must preceed.
+Before starting the installation of Arno release of OPNFV when using Fuel as a deployment tool, some planning must preceed.
-First of all, the Fuel@OPNFV .iso image needs to be retrieved, the Latest stable Arno release of Fuel@OPNFV can be found here: <www.opnfv.org/abc/def>
+First of all, the Fuel@OPNFV .iso image needs to be retrieved, the Latest stable Arno release of OPNFV when using Fuel as a deployment tool can be found here: <www.opnfv.org/abc/def>
Alternatively, you may build the .iso from source by cloning the opnfv/genesis git repository:
<cd fuel/build; make all>
-For more information on how to build, please see "OPNF Build instructions for - FUel@OPNFV <http://www.opnfv.org/xyz
+For more information on how to build, please see "OPNFV Build instructions for - Arno release of OPNFV when using Fuel as a deployment tool <http://www.opnfv.org/xyz>
Next, familiarize yourself with the Fuel 6.0.1 version by reading the following documents:
5 Top of the rack (TOR) Configuration requirements
====================================================
-The switching infrastructure provides connectivity for the OPNFV infra-structure operations, tenant networks (East/West) and provider connectivity (North/South bound connectivity); it als provides needed connectivity for the strage Area Network (SAN). To avoid traffic congestion, it is strongly sugested that three physcally separated networks are used, that is: 1 physical network for administration and control, one physical network for tenant private and public networks, and one physical network for SAN. The switching connectivity can (but does not need to) be fully redundant, in such case it and comprises a redundant 10GE switch pair for each of the three physcally separated networks.
+The switching infrastructure provides connectivity for the OPNFV infra-structure operations, tenant networks (East/West) and provider connectivity (North/South bound connectivity); it also provides needed connectivity for the storage Area Network (SAN). To avoid traffic congestion, it is strongly sugested that three physcally separated networks are used, that is: 1 physical network for administration and control, one physical network for tenant private and public networks, and one physical network for SAN. The switching connectivity can (but does not need to) be fully redundant, in such case it and comprises a redundant 10GE switch pair for each of the three physcally separated networks.
The physical TOR switches are **not** automatically configured from the OPNFV reference platform. All the networks involved in the OPNFV infra-structure as well as the provider networks and the private tenant VLANs needs to be manually configured.
-The following sections guides through required black-box switch configurations.
-
-5.1 VLAN considerations and blue-print
---------------------------------------
+Manual configuration of the Arno hardware platform should be carried out according to the Pharos specification <link>.
-5.2 IP Address plan considerations and blue-print
--------------------------------------------------
6 OPNFV Software installation and deployment
==============================================
6.1 Install Fuel master
-----------------------
-1. Mount the built .iso file (release/opnfv-<version>.iso) as a boot device to the fuel server.
+1. Mount the built .iso file (release/opnfv-<version>.iso) as a boot device to the jump host server.
-2. Reboot the fuel server.
+2. Reboot the jump host to establish the Fuel server.
- The system now boots from the ISO image.
--- /dev/null
+title: Deployment Environment Adapter (DEA)
+# DEA API version supported
+version: 1.1
+created: Thu May 21 13:34:13 CEST 2015
+comment: No HA deployment with Ceph
+nodes:
+- id: 1
+ interfaces:
+ eth0:
+ - public
+ eth1:
+ - fuelweb_admin
+ - management
+ - storage
+ - private
+ role: ceph-osd,controller
+- id: 2
+ interfaces:
+ eth0:
+ - public
+ eth1:
+ - fuelweb_admin
+ - management
+ - storage
+ - private
+ role: ceph-osd,compute
+- id: 3
+ interfaces:
+ eth0:
+ - public
+ eth1:
+ - fuelweb_admin
+ - management
+ - storage
+ - private
+ role: ceph-osd,compute
+- id: 4
+ interfaces:
+ eth0:
+ - public
+ eth1:
+ - fuelweb_admin
+ - management
+ - storage
+ - private
+ role: ceph-osd,compute
+- id: 5
+ interfaces:
+ eth0:
+ - public
+ eth1:
+ - fuelweb_admin
+ - management
+ - storage
+ - private
+ role: ceph-osd,compute
+environment_mode: multinode
+environment_name: auto_ceph_noha
+fuel:
+ ADMIN_NETWORK:
+ dhcp_pool_end: 10.20.255.254
+ dhcp_pool_start: 10.20.0.3
+ ipaddress: 10.20.0.2
+ netmask: 255.255.0.0
+ DNS_DOMAIN: domain.tld
+ DNS_SEARCH: domain.tld
+ DNS_UPSTREAM: 8.8.8.8
+ FUEL_ACCESS:
+ password: admin
+ user: admin
+ HOSTNAME: fuel-64-ceph
+ NTP1: 0.pool.ntp.org
+ NTP2: 1.pool.ntp.org
+ NTP3: 2.pool.ntp.org
+controller:
+- action: add-br
+ name: br-eth0
+- action: add-port
+ bridge: br-eth0
+ name: eth0
+- action: add-br
+ name: br-eth1
+- action: add-port
+ bridge: br-eth1
+ name: eth1
+- action: add-br
+ name: br-ex
+- action: add-br
+ name: br-mgmt
+- action: add-br
+ name: br-storage
+- action: add-br
+ name: br-fw-admin
+- action: add-patch
+ bridges:
+ - br-eth1
+ - br-storage
+ tags:
+ - 301
+ - 0
+ vlan_ids:
+ - 301
+ - 0
+- action: add-patch
+ bridges:
+ - br-eth1
+ - br-mgmt
+ tags:
+ - 300
+ - 0
+ vlan_ids:
+ - 300
+ - 0
+- action: add-patch
+ bridges:
+ - br-eth1
+ - br-fw-admin
+ trunks:
+ - 0
+- action: add-patch
+ bridges:
+ - br-eth0
+ - br-ex
+ trunks:
+ - 0
+- action: add-br
+ name: br-prv
+- action: add-patch
+ bridges:
+ - br-eth1
+ - br-prv
+compute:
+- action: add-br
+ name: br-eth0
+- action: add-port
+ bridge: br-eth0
+ name: eth0
+- action: add-br
+ name: br-eth1
+- action: add-port
+ bridge: br-eth1
+ name: eth1
+- action: add-br
+ name: br-mgmt
+- action: add-br
+ name: br-storage
+- action: add-br
+ name: br-fw-admin
+- action: add-patch
+ bridges:
+ - br-eth1
+ - br-storage
+ tags:
+ - 301
+ - 0
+ vlan_ids:
+ - 301
+ - 0
+- action: add-patch
+ bridges:
+ - br-eth1
+ - br-mgmt
+ tags:
+ - 300
+ - 0
+ vlan_ids:
+ - 300
+ - 0
+- action: add-patch
+ bridges:
+ - br-eth1
+ - br-fw-admin
+ trunks:
+ - 0
+- action: add-br
+ name: br-prv
+- action: add-patch
+ bridges:
+ - br-eth1
+ - br-prv
+opnfv:
+ compute: {}
+ controller: {}
+network:
+ networking_parameters:
+ base_mac: fa:16:3e:00:00:00
+ dns_nameservers:
+ - 8.8.4.4
+ - 8.8.8.8
+ floating_ranges:
+ - - 172.30.9.80
+ - 172.30.9.89
+ gre_id_range:
+ - 2
+ - 65535
+ internal_cidr: 192.168.111.0/24
+ internal_gateway: 192.168.111.1
+ net_l23_provider: ovs
+ segmentation_type: vlan
+ vlan_range:
+ - 1000
+ - 1010
+ networks:
+ - cidr: 172.30.9.0/24
+ gateway: 172.30.9.1
+ ip_ranges:
+ - - 172.30.9.70
+ - 172.30.9.70
+ meta:
+ assign_vip: true
+ cidr: 172.16.0.0/24
+ configurable: true
+ floating_range_var: floating_ranges
+ ip_range:
+ - 172.16.0.2
+ - 172.16.0.126
+ map_priority: 1
+ name: public
+ notation: ip_ranges
+ render_addr_mask: public
+ render_type: null
+ use_gateway: true
+ vlan_start: null
+ name: public
+ vlan_start: null
+ - cidr: 192.168.0.0/24
+ gateway: null
+ ip_ranges:
+ - - 192.168.0.2
+ - 192.168.0.254
+ meta:
+ assign_vip: true
+ cidr: 192.168.0.0/24
+ configurable: true
+ map_priority: 2
+ name: management
+ notation: cidr
+ render_addr_mask: internal
+ render_type: cidr
+ use_gateway: false
+ vlan_start: 101
+ name: management
+ vlan_start: 300
+ - cidr: 192.168.1.0/24
+ gateway: null
+ ip_ranges:
+ - - 192.168.1.2
+ - 192.168.1.254
+ meta:
+ assign_vip: false
+ cidr: 192.168.1.0/24
+ configurable: true
+ map_priority: 2
+ name: storage
+ notation: cidr
+ render_addr_mask: storage
+ render_type: cidr
+ use_gateway: false
+ vlan_start: 102
+ name: storage
+ vlan_start: 301
+ - cidr: null
+ gateway: null
+ ip_ranges: []
+ meta:
+ assign_vip: false
+ configurable: false
+ map_priority: 2
+ name: private
+ neutron_vlan_range: true
+ notation: null
+ render_addr_mask: null
+ render_type: null
+ seg_type: vlan
+ use_gateway: false
+ vlan_start: null
+ name: private
+ vlan_start: null
+ - cidr: 10.20.0.0/16
+ gateway: null
+ ip_ranges:
+ - - 10.20.0.3
+ - 10.20.255.254
+ meta:
+ assign_vip: false
+ configurable: false
+ map_priority: 0
+ notation: ip_ranges
+ render_addr_mask: null
+ render_type: null
+ unmovable: true
+ use_gateway: true
+ name: fuelweb_admin
+ vlan_start: null
+settings:
+ editable:
+ access:
+ email:
+ description: Email address for Administrator
+ label: email
+ type: text
+ value: admin@localhost
+ weight: 40
+ metadata:
+ label: Access
+ weight: 10
+ password:
+ description: Password for Administrator
+ label: password
+ type: password
+ value: admin
+ weight: 20
+ tenant:
+ description: Tenant (project) name for Administrator
+ label: tenant
+ regex:
+ error: Invalid tenant name
+ source: ^(?!services$)(?!nova$)(?!glance$)(?!keystone$)(?!neutron$)(?!cinder$)(?!swift$)(?!ceph$)(?![Gg]uest$).*
+ type: text
+ value: admin
+ weight: 30
+ user:
+ description: Username for Administrator
+ label: username
+ regex:
+ error: Invalid username
+ source: ^(?!services$)(?!nova$)(?!glance$)(?!keystone$)(?!neutron$)(?!cinder$)(?!swift$)(?!ceph$)(?![Gg]uest$).*
+ type: text
+ value: admin
+ weight: 10
+ additional_components:
+ ceilometer:
+ description: If selected, Ceilometer component will be installed
+ label: Install Ceilometer
+ type: checkbox
+ value: false
+ weight: 40
+ heat:
+ description: ''
+ label: ''
+ type: hidden
+ value: true
+ weight: 30
+ metadata:
+ label: Additional Components
+ weight: 20
+ murano:
+ description: If selected, Murano component will be installed
+ label: Install Murano
+ restrictions:
+ - cluster:net_provider != 'neutron'
+ type: checkbox
+ value: false
+ weight: 20
+ sahara:
+ description: If selected, Sahara component will be installed
+ label: Install Sahara
+ type: checkbox
+ value: false
+ weight: 10
+ common:
+ auth_key:
+ description: Public key(s) to include in authorized_keys on deployed nodes
+ label: Public Key
+ type: text
+ value: ''
+ weight: 70
+ auto_assign_floating_ip:
+ description: If selected, OpenStack will automatically assign a floating IP
+ to a new instance
+ label: Auto assign floating IP
+ restrictions:
+ - cluster:net_provider == 'neutron'
+ type: checkbox
+ value: false
+ weight: 40
+ compute_scheduler_driver:
+ label: Scheduler driver
+ type: radio
+ value: nova.scheduler.filter_scheduler.FilterScheduler
+ values:
+ - data: nova.scheduler.filter_scheduler.FilterScheduler
+ description: Currently the most advanced OpenStack scheduler. See the OpenStack
+ documentation for details.
+ label: Filter scheduler
+ - data: nova.scheduler.simple.SimpleScheduler
+ description: This is 'naive' scheduler which tries to find the least loaded
+ host
+ label: Simple scheduler
+ weight: 40
+ debug:
+ description: Debug logging mode provides more information, but requires more
+ disk space.
+ label: OpenStack debug logging
+ type: checkbox
+ value: false
+ weight: 20
+ disable_offload:
+ description: If set, generic segmentation offload (gso) and generic receive
+ offload (gro) on physical nics will be disabled. See ethtool man.
+ label: Disable generic offload on physical nics
+ restrictions:
+ - action: hide
+ condition: cluster:net_provider == 'neutron' and networking_parameters:segmentation_type
+ == 'gre'
+ type: checkbox
+ value: true
+ weight: 80
+ libvirt_type:
+ label: Hypervisor type
+ type: radio
+ value: kvm
+ values:
+ - data: kvm
+ description: Choose this type of hypervisor if you run OpenStack on hardware
+ label: KVM
+ restrictions:
+ - settings:common.libvirt_type.value == 'vcenter'
+ - data: qemu
+ description: Choose this type of hypervisor if you run OpenStack on virtual
+ hosts.
+ label: QEMU
+ restrictions:
+ - settings:common.libvirt_type.value == 'vcenter'
+ - data: vcenter
+ description: Choose this type of hypervisor if you run OpenStack in a vCenter
+ environment.
+ label: vCenter
+ restrictions:
+ - settings:common.libvirt_type.value != 'vcenter' or cluster:net_provider
+ == 'neutron'
+ weight: 30
+ metadata:
+ label: Common
+ weight: 30
+ nova_quota:
+ description: Quotas are used to limit CPU and memory usage for tenants. Enabling
+ quotas will increase load on the Nova database.
+ label: Nova quotas
+ type: checkbox
+ value: false
+ weight: 25
+ resume_guests_state_on_host_boot:
+ description: Whether to resume previous guests state when the host reboots.
+ If enabled, this option causes guests assigned to the host to resume their
+ previous state. If the guest was running a restart will be attempted when
+ nova-compute starts. If the guest was not running previously, a restart
+ will not be attempted.
+ label: Resume guests state on host boot
+ type: checkbox
+ value: true
+ weight: 60
+ use_cow_images:
+ description: For most cases you will want qcow format. If it's disabled, raw
+ image format will be used to run VMs. OpenStack with raw format currently
+ does not support snapshotting.
+ label: Use qcow format for images
+ type: checkbox
+ value: true
+ weight: 50
+ corosync:
+ group:
+ description: ''
+ label: Group
+ type: text
+ value: 226.94.1.1
+ weight: 10
+ metadata:
+ label: Corosync
+ restrictions:
+ - action: hide
+ condition: 'true'
+ weight: 50
+ port:
+ description: ''
+ label: Port
+ type: text
+ value: '12000'
+ weight: 20
+ verified:
+ description: Set True only if multicast is configured correctly on router.
+ label: Need to pass network verification.
+ type: checkbox
+ value: false
+ weight: 10
+ external_dns:
+ dns_list:
+ description: List of upstream DNS servers, separated by comma
+ label: DNS list
+ type: text
+ value: 8.8.8.8, 8.8.4.4
+ weight: 10
+ metadata:
+ label: Upstream DNS
+ weight: 90
+ external_ntp:
+ metadata:
+ label: Upstream NTP
+ weight: 100
+ ntp_list:
+ description: List of upstream NTP servers, separated by comma
+ label: NTP servers list
+ type: text
+ value: 0.pool.ntp.org, 1.pool.ntp.org
+ weight: 10
+ kernel_params:
+ kernel:
+ description: Default kernel parameters
+ label: Initial parameters
+ type: text
+ value: console=ttyS0,9600 console=tty0 rootdelay=90 nomodeset
+ weight: 45
+ metadata:
+ label: Kernel parameters
+ weight: 40
+ neutron_mellanox:
+ metadata:
+ enabled: true
+ label: Mellanox Neutron components
+ toggleable: false
+ weight: 50
+ plugin:
+ label: Mellanox drivers and SR-IOV plugin
+ type: radio
+ value: disabled
+ values:
+ - data: disabled
+ description: If selected, Mellanox drivers, Neutron and Cinder plugin will
+ not be installed.
+ label: Mellanox drivers and plugins disabled
+ restrictions:
+ - settings:storage.iser.value == true
+ - data: drivers_only
+ description: If selected, Mellanox Ethernet drivers will be installed to
+ support networking over Mellanox NIC. Mellanox Neutron plugin will not
+ be installed.
+ label: Install only Mellanox drivers
+ restrictions:
+ - settings:common.libvirt_type.value != 'kvm'
+ - data: ethernet
+ description: If selected, both Mellanox Ethernet drivers and Mellanox network
+ acceleration (Neutron) plugin will be installed.
+ label: Install Mellanox drivers and SR-IOV plugin
+ restrictions:
+ - settings:common.libvirt_type.value != 'kvm' or not (cluster:net_provider
+ == 'neutron' and networking_parameters:segmentation_type == 'vlan')
+ weight: 60
+ vf_num:
+ description: Note that one virtual function will be reserved to the storage
+ network, in case of choosing iSER.
+ label: Number of virtual NICs
+ restrictions:
+ - settings:neutron_mellanox.plugin.value != 'ethernet'
+ type: text
+ value: '16'
+ weight: 70
+ nsx_plugin:
+ connector_type:
+ description: Default network transport type to use
+ label: NSX connector type
+ type: select
+ value: stt
+ values:
+ - data: gre
+ label: GRE
+ - data: ipsec_gre
+ label: GRE over IPSec
+ - data: stt
+ label: STT
+ - data: ipsec_stt
+ label: STT over IPSec
+ - data: bridge
+ label: Bridge
+ weight: 80
+ l3_gw_service_uuid:
+ description: UUID for the default L3 gateway service to use with this cluster
+ label: L3 service UUID
+ regex:
+ error: Invalid L3 gateway service UUID
+ source: '[a-f\d]{8}-[a-f\d]{4}-[a-f\d]{4}-[a-f\d]{4}-[a-f\d]{12}'
+ type: text
+ value: ''
+ weight: 50
+ metadata:
+ enabled: false
+ label: VMware NSX
+ restrictions:
+ - action: hide
+ condition: cluster:net_provider != 'neutron' or networking_parameters:net_l23_provider
+ != 'nsx'
+ weight: 20
+ nsx_controllers:
+ description: One or more IPv4[:port] addresses of NSX controller node, separated
+ by comma (e.g. 10.30.30.2,192.168.110.254:443)
+ label: NSX controller endpoint
+ regex:
+ error: Invalid controller endpoints, specify valid IPv4[:port] pair
+ source: ^(([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])\.){3}([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])(:(6553[0-5]|655[0-2][\d]|65[0-4][\d]{2}|6[0-4][\d]{3}|5[\d]{4}|[\d][\d]{0,3}))?(,(([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])\.){3}([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])(:(6553[0-5]|655[0-2][\d]|65[0-4][\d]{2}|6[0-4][\d]{3}|5[\d]{4}|[\d][\d]{0,3}))?)*$
+ type: text
+ value: ''
+ weight: 60
+ nsx_password:
+ description: Password for Administrator
+ label: NSX password
+ regex:
+ error: Empty password
+ source: \S
+ type: password
+ value: ''
+ weight: 30
+ nsx_username:
+ description: NSX administrator's username
+ label: NSX username
+ regex:
+ error: Empty username
+ source: \S
+ type: text
+ value: admin
+ weight: 20
+ packages_url:
+ description: URL to NSX specific packages
+ label: URL to NSX bits
+ regex:
+ error: Invalid URL, specify valid HTTP/HTTPS URL with IPv4 address (e.g.
+ http://10.20.0.2/nsx)
+ source: ^https?://(([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])\.){3}([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])(:(6553[0-5]|655[0-2][\d]|65[0-4][\d]{2}|6[0-4][\d]{3}|5[\d]{4}|[\d][\d]{0,3}))?(/.*)?$
+ type: text
+ value: ''
+ weight: 70
+ replication_mode:
+ description: ''
+ label: NSX cluster has Service nodes
+ type: checkbox
+ value: true
+ weight: 90
+ transport_zone_uuid:
+ description: UUID of the pre-existing default NSX Transport zone
+ label: Transport zone UUID
+ regex:
+ error: Invalid transport zone UUID
+ source: '[a-f\d]{8}-[a-f\d]{4}-[a-f\d]{4}-[a-f\d]{4}-[a-f\d]{12}'
+ type: text
+ value: ''
+ weight: 40
+ provision:
+ metadata:
+ label: Provision
+ restrictions:
+ - action: hide
+ condition: not ('experimental' in version:feature_groups)
+ weight: 80
+ method:
+ description: Which provision method to use for this cluster.
+ label: Provision method
+ type: radio
+ value: cobbler
+ values:
+ - data: image
+ description: Copying pre-built images on a disk.
+ label: Image
+ - data: cobbler
+ description: Install from scratch using anaconda or debian-installer.
+ label: Classic (use anaconda or debian-installer)
+ public_network_assignment:
+ assign_to_all_nodes:
+ description: When disabled, public network will be assigned to controllers
+ and zabbix-server only
+ label: Assign public network to all nodes
+ type: checkbox
+ value: false
+ weight: 10
+ metadata:
+ label: Public network assignment
+ restrictions:
+ - action: hide
+ condition: cluster:net_provider != 'neutron'
+ weight: 50
+ storage:
+ ephemeral_ceph:
+ description: Configures Nova to store ephemeral volumes in RBD. This works
+ best if Ceph is enabled for volumes and images, too. Enables live migration
+ of all types of Ceph backed VMs (without this option, live migration will
+ only work with VMs launched from Cinder volumes).
+ label: Ceph RBD for ephemeral volumes (Nova)
+ restrictions:
+ - settings:common.libvirt_type.value == 'vcenter'
+ type: checkbox
+ value: true
+ weight: 75
+ images_ceph:
+ description: Configures Glance to use the Ceph RBD backend to store images.
+ If enabled, this option will prevent Swift from installing.
+ label: Ceph RBD for images (Glance)
+ type: checkbox
+ value: true
+ weight: 30
+ images_vcenter:
+ description: Configures Glance to use the vCenter/ESXi backend to store images.
+ If enabled, this option will prevent Swift from installing.
+ label: VMWare vCenter/ESXi datastore for images (Glance)
+ restrictions:
+ - settings:common.libvirt_type.value != 'vcenter'
+ type: checkbox
+ value: false
+ weight: 35
+ iser:
+ description: 'High performance block storage: Cinder volumes over iSER protocol
+ (iSCSI over RDMA). This feature requires SR-IOV capabilities in the NIC,
+ and will use a dedicated virtual function for the storage network.'
+ label: iSER protocol for volumes (Cinder)
+ restrictions:
+ - settings:storage.volumes_lvm.value != true or settings:common.libvirt_type.value
+ != 'kvm'
+ type: checkbox
+ value: false
+ weight: 11
+ metadata:
+ label: Storage
+ weight: 60
+ objects_ceph:
+ description: Configures RadosGW front end for Ceph RBD. This exposes S3 and
+ Swift API Interfaces. If enabled, this option will prevent Swift from installing.
+ label: Ceph RadosGW for objects (Swift API)
+ restrictions:
+ - settings:storage.images_ceph.value == false
+ type: checkbox
+ value: false
+ weight: 80
+ osd_pool_size:
+ description: Configures the default number of object replicas in Ceph. This
+ number must be equal to or lower than the number of deployed 'Storage -
+ Ceph OSD' nodes.
+ label: Ceph object replication factor
+ regex:
+ error: Invalid number
+ source: ^[1-9]\d*$
+ restrictions:
+ - settings:common.libvirt_type.value == 'vcenter'
+ type: text
+ value: '2'
+ weight: 85
+ vc_datacenter:
+ description: Inventory path to a datacenter. If you want to use ESXi host
+ as datastore, it should be "ha-datacenter".
+ label: Datacenter name
+ regex:
+ error: Empty datacenter
+ source: \S
+ restrictions:
+ - action: hide
+ condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value
+ != 'vcenter'
+ type: text
+ value: ''
+ weight: 65
+ vc_datastore:
+ description: Datastore associated with the datacenter.
+ label: Datastore name
+ regex:
+ error: Empty datastore
+ source: \S
+ restrictions:
+ - action: hide
+ condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value
+ != 'vcenter'
+ type: text
+ value: ''
+ weight: 60
+ vc_host:
+ description: IP Address of vCenter/ESXi
+ label: vCenter/ESXi IP
+ regex:
+ error: Specify valid IPv4 address
+ source: ^(([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])\.){3}([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])$
+ restrictions:
+ - action: hide
+ condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value
+ != 'vcenter'
+ type: text
+ value: ''
+ weight: 45
+ vc_image_dir:
+ description: The name of the directory where the glance images will be stored
+ in the VMware datastore.
+ label: Datastore Images directory
+ regex:
+ error: Empty images directory
+ source: \S
+ restrictions:
+ - action: hide
+ condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value
+ != 'vcenter'
+ type: text
+ value: /openstack_glance
+ weight: 70
+ vc_password:
+ description: vCenter/ESXi admin password
+ label: Password
+ regex:
+ error: Empty password
+ source: \S
+ restrictions:
+ - action: hide
+ condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value
+ != 'vcenter'
+ type: password
+ value: ''
+ weight: 55
+ vc_user:
+ description: vCenter/ESXi admin username
+ label: Username
+ regex:
+ error: Empty username
+ source: \S
+ restrictions:
+ - action: hide
+ condition: settings:storage.images_vcenter.value == false or settings:common.libvirt_type.value
+ != 'vcenter'
+ type: text
+ value: ''
+ weight: 50
+ volumes_ceph:
+ description: Configures Cinder to store volumes in Ceph RBD images.
+ label: Ceph RBD for volumes (Cinder)
+ restrictions:
+ - settings:storage.volumes_lvm.value == true or settings:common.libvirt_type.value
+ == 'vcenter'
+ type: checkbox
+ value: true
+ weight: 20
+ volumes_lvm:
+ description: Requires at least one Storage - Cinder LVM node.
+ label: Cinder LVM over iSCSI for volumes
+ restrictions:
+ - settings:storage.volumes_ceph.value == true
+ type: checkbox
+ value: false
+ weight: 10
+ volumes_vmdk:
+ description: Configures Cinder to store volumes via VMware vCenter.
+ label: VMware vCenter for volumes (Cinder)
+ restrictions:
+ - settings:common.libvirt_type.value != 'vcenter' or settings:storage.volumes_lvm.value
+ == true
+ type: checkbox
+ value: false
+ weight: 15
+ syslog:
+ metadata:
+ label: Syslog
+ weight: 50
+ syslog_port:
+ description: Remote syslog port
+ label: Port
+ regex:
+ error: Invalid Syslog port
+ source: ^([1-9][0-9]{0,3}|[1-5][0-9]{4}|6[0-4][0-9]{3}|65[0-4][0-9]{2}|655[0-2][0-9]|6553[0-5])$
+ type: text
+ value: '514'
+ weight: 20
+ syslog_server:
+ description: Remote syslog hostname
+ label: Hostname
+ type: text
+ value: ''
+ weight: 10
+ syslog_transport:
+ label: Syslog transport protocol
+ type: radio
+ value: tcp
+ values:
+ - data: udp
+ description: ''
+ label: UDP
+ - data: tcp
+ description: ''
+ label: TCP
+ weight: 30
+ vcenter:
+ cluster:
+ description: vCenter cluster name. If you have multiple clusters, use comma
+ to separate names
+ label: Cluster
+ regex:
+ error: Invalid cluster list
+ source: ^([^,\ ]+([\ ]*[^,\ ])*)(,[^,\ ]+([\ ]*[^,\ ])*)*$
+ type: text
+ value: ''
+ weight: 40
+ datastore_regex:
+ description: The Datastore regexp setting specifies the data stores to use
+ with Compute. For example, "nas.*". If you want to use all available datastores,
+ leave this field blank
+ label: Datastore regexp
+ regex:
+ error: Invalid datastore regexp
+ source: ^(\S.*\S|\S|)$
+ type: text
+ value: ''
+ weight: 50
+ host_ip:
+ description: IP Address of vCenter
+ label: vCenter IP
+ regex:
+ error: Specify valid IPv4 address
+ source: ^(([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])\.){3}([\d]|[1-9][\d]|1[\d]{2}|2[0-4][\d]|25[0-5])$
+ type: text
+ value: ''
+ weight: 10
+ metadata:
+ label: vCenter
+ restrictions:
+ - action: hide
+ condition: settings:common.libvirt_type.value != 'vcenter'
+ weight: 20
+ use_vcenter:
+ description: ''
+ label: ''
+ type: hidden
+ value: true
+ weight: 5
+ vc_password:
+ description: vCenter admin password
+ label: Password
+ regex:
+ error: Empty password
+ source: \S
+ type: password
+ value: admin
+ weight: 30
+ vc_user:
+ description: vCenter admin username
+ label: Username
+ regex:
+ error: Empty username
+ source: \S
+ type: text
+ value: admin
+ weight: 20
+ vlan_interface:
+ description: Physical ESXi host ethernet adapter for VLAN networking (e.g.
+ vmnic1). If empty "vmnic0" is used by default
+ label: ESXi VLAN interface
+ restrictions:
+ - action: hide
+ condition: cluster:net_provider != 'nova_network' or networking_parameters:net_manager
+ != 'VlanManager'
+ type: text
+ value: ''
+ weight: 60
+ zabbix:
+ metadata:
+ label: Zabbix Access
+ restrictions:
+ - action: hide
+ condition: not ('experimental' in version:feature_groups)
+ weight: 70
+ password:
+ description: Password for Zabbix Administrator
+ label: password
+ type: password
+ value: zabbix
+ weight: 20
+ username:
+ description: Username for Zabbix Administrator
+ label: username
+ type: text
+ value: admin
+ weight: 10
Code Review / genesis.git / commitdiff