fi
}
-check_disk_for_mysql_dump()
+mysql_need_update()
{
- # Where to backup current database if mysql need to be upgraded
- MYSQL_BACKUP_DIR=/var/tmp/mysql_upgrade_osp
- MYSQL_TEMP_UPGRADE_BACKUP_DIR=/var/lib/mysql-temp-upgrade-backup
- # Spare disk ratio for extra safety
- MYSQL_BACKUP_SIZE_RATIO=1.2
-
# Shall we upgrade mysql data directory during the stack upgrade?
if [ "$mariadb_do_major_upgrade" = "auto" ]; then
ret=$(is_mysql_upgrade_needed)
else
DO_MYSQL_UPGRADE=1
fi
+}
+
+check_disk_for_mysql_dump()
+{
+ # Where to backup current database if mysql need to be upgraded
+ MYSQL_BACKUP_DIR=/var/tmp/mysql_upgrade_osp
+ MYSQL_TEMP_UPGRADE_BACKUP_DIR=/var/lib/mysql-temp-upgrade-backup
+ # Spare disk ratio for extra safety
+ MYSQL_BACKUP_SIZE_RATIO=1.2
+
+ mysql_need_update
if [ "$(hiera -c /etc/puppet/hiera.yaml bootstrap_nodeid)" = "$(facter hostname)" ]; then
if [ $DO_MYSQL_UPGRADE -eq 1 ]; then
set -eu
-cluster_sync_timeout=1800
-
check_cluster
check_pcsd
if [[ -n $(is_bootstrap_node) ]]; then
# at the end of this script
if [[ -n $(is_bootstrap_node) ]]; then
STONITH_STATE=$(pcs property show stonith-enabled | grep "stonith-enabled" | awk '{ print $2 }')
+ # We create this empty file if stonith was set to true so we can reenable stonith in step2
+ rm -f /var/tmp/stonith-true
+ if [ $STONITH_STATE == "true" ]; then
+ touch /var/tmp/stonith-true
+ fi
pcs property set stonith-enabled=false
fi
rabbitmq_mitaka_newton_upgrade
fi
-# After migrating the cluster to HA-NG the services not under pacemaker's control
-# are still up and running. We need to stop them explicitely otherwise during the yum
-# upgrade the rpm %post sections will try to do a systemctl try-restart <service>, which
-# is going to take a long time because rabbit is down. By having the service stopped
-# systemctl try-restart is a noop
-
-for service in $(services_to_migrate); do
- manage_systemd_service stop "${service%%-clone}"
- # So the reason for not reusing check_resource_systemd is that
- # I have observed systemctl is-active returning unknown with at least
- # one service that was stopped (See LP 1627254)
- timeout=600
- tstart=$(date +%s)
- tend=$(( $tstart + $timeout ))
- check_interval=3
- while (( $(date +%s) < $tend )); do
- if [[ "$(systemctl is-active ${service%%-clone})" = "active" ]]; then
- echo "$service still active, sleeping $check_interval seconds."
- sleep $check_interval
- else
- # we do not care if it is inactive, unknown or failed as long as it is
- # not running
- break
- fi
-
- done
-done
-
-# In case the mysql package is updated, the database on disk must be
-# upgraded as well. This typically needs to happen during major
-# version upgrades (e.g. 5.5 -> 5.6, 5.5 -> 10.1...)
-#
-# Because in-place upgrades are not supported across 2+ major versions
-# (e.g. 5.5 -> 10.1), we rely on logical upgrades via dump/restore cycle
-# https://bugzilla.redhat.com/show_bug.cgi?id=1341968
-#
-# The default is to determine automatically if upgrade is needed based
-# on mysql package versionning, but this can be overriden manually
-# to support specific upgrade scenario
-
-if [[ -n $(is_bootstrap_node) ]]; then
- if [ $DO_MYSQL_UPGRADE -eq 1 ]; then
- mysqldump $backup_flags > "$MYSQL_BACKUP_DIR/openstack_database.sql"
- cp -rdp /etc/my.cnf* "$MYSQL_BACKUP_DIR"
- fi
-
- pcs resource disable redis
- check_resource redis stopped 600
- pcs resource disable rabbitmq
- check_resource rabbitmq stopped 600
- pcs resource disable galera
- check_resource galera stopped 600
- pcs resource disable openstack-cinder-volume
- check_resource openstack-cinder-volume stopped 600
- # Disable all VIPs before stopping the cluster, so that pcs doesn't use one as a source address:
- # https://bugzilla.redhat.com/show_bug.cgi?id=1330688
- for vip in $(pcs resource show | grep ocf::heartbeat:IPaddr2 | grep Started | awk '{ print $1 }'); do
- pcs resource disable $vip
- check_resource $vip stopped 60
- done
- pcs cluster stop --all
-fi
-
-
-# Swift isn't controlled by pacemaker
-systemctl_swift stop
-
-tstart=$(date +%s)
-while systemctl is-active pacemaker; do
- sleep 5
- tnow=$(date +%s)
- if (( tnow-tstart > cluster_sync_timeout )) ; then
- echo_error "ERROR: cluster shutdown timed out"
- exit 1
- fi
-done
-
-# The reason we do an sql dump *and* we move the old dir out of
-# the way is because it gives us an extra level of safety in case
-# something goes wrong during the upgrade. Once the restore is
-# successful we go ahead and remove it. If the directory exists
-# we bail out as it means the upgrade process had issues in the last
-# run.
-if [ $DO_MYSQL_UPGRADE -eq 1 ]; then
- if [ -d $MYSQL_TEMP_UPGRADE_BACKUP_DIR ]; then
- echo_error "ERROR: mysql backup dir already exist"
- exit 1
- fi
- mv /var/lib/mysql $MYSQL_TEMP_UPGRADE_BACKUP_DIR
-fi
-
-# Special-case OVS for https://bugs.launchpad.net/tripleo/+bug/1635205
-if [[ -n $(rpm -q --scripts openvswitch | awk '/postuninstall/,/*/' | grep "systemctl.*try-restart") ]]; then
- echo "Manual upgrade of openvswitch - restart in postun detected"
- mkdir OVS_UPGRADE || true
- pushd OVS_UPGRADE
- echo "Attempting to downloading latest openvswitch with yumdownloader"
- yumdownloader --resolve openvswitch
- echo "Updating openvswitch with nopostun option"
- rpm -U --replacepkgs --nopostun ./*.rpm
- popd
-else
- echo "Skipping manual upgrade of openvswitch - no restart in postun detected"
-fi
-
-yum -y install python-zaqarclient # needed for os-collect-config
-yum -y -q update
-
-# We need to ensure at least those two configuration settings, otherwise
-# mariadb 10.1+ won't activate galera replication.
-# wsrep_cluster_address must only be set though, its value does not
-# matter because it's overriden by the galera resource agent.
-cat >> /etc/my.cnf.d/galera.cnf <<EOF
-[mysqld]
-wsrep_on = ON
-wsrep_cluster_address = gcomm://localhost
-EOF
-
-if [ $DO_MYSQL_UPGRADE -eq 1 ]; then
- # Scripts run via heat have no HOME variable set and this confuses
- # mysqladmin
- export HOME=/root
-
- mkdir /var/lib/mysql || /bin/true
- chown mysql:mysql /var/lib/mysql
- chmod 0755 /var/lib/mysql
- restorecon -R /var/lib/mysql/
- mysql_install_db --datadir=/var/lib/mysql --user=mysql
- chown -R mysql:mysql /var/lib/mysql/
-
- if [ "$(hiera -c /etc/puppet/hiera.yaml bootstrap_nodeid)" = "$(facter hostname)" ]; then
- mysqld_safe --wsrep-new-cluster &
- # We have a populated /root/.my.cnf with root/password here so
- # we need to temporarily rename it because the newly created
- # db is empty and no root password is set
- mv /root/.my.cnf /root/.my.cnf.temporary
- timeout 60 sh -c 'while ! mysql -e "" &> /dev/null; do sleep 1; done'
- mysql -u root < "$MYSQL_BACKUP_DIR/openstack_database.sql"
- mv /root/.my.cnf.temporary /root/.my.cnf
- mysqladmin -u root shutdown
- # The import was successful so we may remove the folder
- rm -r "$MYSQL_BACKUP_DIR"
- fi
-fi
-
-# If we reached here without error we can safely blow away the origin
-# mysql dir from every controller
-
-# TODO: What if the upgrade fails on the bootstrap node, but not on
-# this controller. Data may be lost.
-if [ $DO_MYSQL_UPGRADE -eq 1 ]; then
- rm -r $MYSQL_TEMP_UPGRADE_BACKUP_DIR
-fi
-
-# Let's reset the stonith back to true if it was true, before starting the cluster
-if [[ -n $(is_bootstrap_node) ]]; then
- if [ $STONITH_STATE == "true" ]; then
- pcs -f /var/lib/pacemaker/cib/cib.xml property set stonith-enabled=true
- fi
-fi
-
-# Pin messages sent to compute nodes to kilo, these will be upgraded later
-crudini --set /etc/nova/nova.conf upgrade_levels compute "$upgrade_level_nova_compute"
-# https://bugzilla.redhat.com/show_bug.cgi?id=1284047
-# Change-Id: Ib3f6c12ff5471e1f017f28b16b1e6496a4a4b435
-crudini --set /etc/ceilometer/ceilometer.conf DEFAULT rpc_backend rabbit
-# https://bugzilla.redhat.com/show_bug.cgi?id=1284058
-# Ifd1861e3df46fad0e44ff9b5cbd58711bbc87c97 Swift Ceilometer middleware no longer exists
-crudini --set /etc/swift/proxy-server.conf pipeline:main pipeline "catch_errors healthcheck cache ratelimit tempurl formpost authtoken keystone staticweb proxy-logging proxy-server"
-# LP: 1615035, required only for M/N upgrade.
-crudini --set /etc/nova/nova.conf DEFAULT scheduler_host_manager host_manager
-# LP: 1627450, required only for M/N upgrade
-crudini --set /etc/nova/nova.conf DEFAULT scheduler_driver filter_scheduler
-
-crudini --set /etc/sahara/sahara.conf DEFAULT plugins ambari,cdh,mapr,vanilla,spark,storm
set -eu
-cluster_form_timeout=600
-cluster_settle_timeout=1800
-galera_sync_timeout=600
+cluster_sync_timeout=1800
-if [[ -n $(is_bootstrap_node) ]]; then
- pcs cluster start --all
+# After migrating the cluster to HA-NG the services not under pacemaker's control
+# are still up and running. We need to stop them explicitely otherwise during the yum
+# upgrade the rpm %post sections will try to do a systemctl try-restart <service>, which
+# is going to take a long time because rabbit is down. By having the service stopped
+# systemctl try-restart is a noop
+for service in $(services_to_migrate); do
+ manage_systemd_service stop "${service%%-clone}"
+ # So the reason for not reusing check_resource_systemd is that
+ # I have observed systemctl is-active returning unknown with at least
+ # one service that was stopped (See LP 1627254)
+ timeout=600
tstart=$(date +%s)
- while pcs status 2>&1 | grep -E '(cluster is not currently running)|(OFFLINE:)'; do
- sleep 5
- tnow=$(date +%s)
- if (( tnow-tstart > cluster_form_timeout )) ; then
- echo_error "ERROR: timed out forming the cluster"
- exit 1
- fi
+ tend=$(( $tstart + $timeout ))
+ check_interval=3
+ while (( $(date +%s) < $tend )); do
+ if [[ "$(systemctl is-active ${service%%-clone})" = "active" ]]; then
+ echo "$service still active, sleeping $check_interval seconds."
+ sleep $check_interval
+ else
+ # we do not care if it is inactive, unknown or failed as long as it is
+ # not running
+ break
+ fi
+
done
+done
- if ! timeout -k 10 $cluster_settle_timeout crm_resource --wait; then
- echo_error "ERROR: timed out waiting for cluster to finish transition"
- exit 1
+# In case the mysql package is updated, the database on disk must be
+# upgraded as well. This typically needs to happen during major
+# version upgrades (e.g. 5.5 -> 5.6, 5.5 -> 10.1...)
+#
+# Because in-place upgrades are not supported across 2+ major versions
+# (e.g. 5.5 -> 10.1), we rely on logical upgrades via dump/restore cycle
+# https://bugzilla.redhat.com/show_bug.cgi?id=1341968
+#
+# The default is to determine automatically if upgrade is needed based
+# on mysql package versionning, but this can be overriden manually
+# to support specific upgrade scenario
+
+# Calling this function will set the DO_MYSQL_UPGRADE variable which is used
+# later
+mysql_need_update
+
+if [[ -n $(is_bootstrap_node) ]]; then
+ if [ $DO_MYSQL_UPGRADE -eq 1 ]; then
+ mysqldump $backup_flags > "$MYSQL_BACKUP_DIR/openstack_database.sql"
+ cp -rdp /etc/my.cnf* "$MYSQL_BACKUP_DIR"
fi
- for vip in $(pcs resource show | grep ocf::heartbeat:IPaddr2 | grep Stopped | awk '{ print $1 }'); do
- pcs resource enable $vip
- check_resource_pacemaker $vip started 60
+ pcs resource disable redis
+ check_resource redis stopped 600
+ pcs resource disable rabbitmq
+ check_resource rabbitmq stopped 600
+ pcs resource disable galera
+ check_resource galera stopped 600
+ pcs resource disable openstack-cinder-volume
+ check_resource openstack-cinder-volume stopped 600
+ # Disable all VIPs before stopping the cluster, so that pcs doesn't use one as a source address:
+ # https://bugzilla.redhat.com/show_bug.cgi?id=1330688
+ for vip in $(pcs resource show | grep ocf::heartbeat:IPaddr2 | grep Started | awk '{ print $1 }'); do
+ pcs resource disable $vip
+ check_resource $vip stopped 60
done
+ pcs cluster stop --all
fi
-start_or_enable_service galera
-check_resource galera started 600
-start_or_enable_service redis
-check_resource redis started 600
-# We need mongod which is now a systemd service up and running before calling
-# ceilometer-dbsync. There is still a race here: mongod might not be up on all nodes
-# so ceilometer-dbsync will fail a couple of times before that. As it retries indefinitely
-# we should be good.
-# Due to LP Bug https://bugs.launchpad.net/tripleo/+bug/1627254 am using systemctl directly atm
-systemctl start mongod
-check_resource mongod started 600
-if [[ -n $(is_bootstrap_node) ]]; then
- tstart=$(date +%s)
- while ! clustercheck; do
- sleep 5
- tnow=$(date +%s)
- if (( tnow-tstart > galera_sync_timeout )) ; then
- echo_error "ERROR galera sync timed out"
- exit 1
- fi
- done
+# Swift isn't controlled by pacemaker
+systemctl_swift stop
- # Run all the db syncs
- # TODO: check if this can be triggered in puppet and removed from here
- ceilometer-dbsync --config-file=/etc/ceilometer/ceilometer.conf
- cinder-manage db sync
- glance-manage --config-file=/etc/glance/glance-registry.conf db_sync
- heat-manage --config-file /etc/heat/heat.conf db_sync
- keystone-manage db_sync
- neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugin.ini upgrade head
- nova-manage db sync
- nova-manage api_db sync
- nova-manage db online_data_migrations
- sahara-db-manage --config-file /etc/sahara/sahara.conf upgrade head
+tstart=$(date +%s)
+while systemctl is-active pacemaker; do
+ sleep 5
+ tnow=$(date +%s)
+ if (( tnow-tstart > cluster_sync_timeout )) ; then
+ echo_error "ERROR: cluster shutdown timed out"
+ exit 1
+ fi
+done
+
+# The reason we do an sql dump *and* we move the old dir out of
+# the way is because it gives us an extra level of safety in case
+# something goes wrong during the upgrade. Once the restore is
+# successful we go ahead and remove it. If the directory exists
+# we bail out as it means the upgrade process had issues in the last
+# run.
+if [ $DO_MYSQL_UPGRADE -eq 1 ]; then
+ if [ -d $MYSQL_TEMP_UPGRADE_BACKUP_DIR ]; then
+ echo_error "ERROR: mysql backup dir already exist"
+ exit 1
+ fi
+ mv /var/lib/mysql $MYSQL_TEMP_UPGRADE_BACKUP_DIR
+fi
+
+# Special-case OVS for https://bugs.launchpad.net/tripleo/+bug/1635205
+if [[ -n $(rpm -q --scripts openvswitch | awk '/postuninstall/,/*/' | grep "systemctl.*try-restart") ]]; then
+ echo "Manual upgrade of openvswitch - restart in postun detected"
+ mkdir OVS_UPGRADE || true
+ pushd OVS_UPGRADE
+ echo "Attempting to downloading latest openvswitch with yumdownloader"
+ yumdownloader --resolve openvswitch
+ echo "Updating openvswitch with nopostun option"
+ rpm -U --replacepkgs --nopostun ./*.rpm
+ popd
+else
+ echo "Skipping manual upgrade of openvswitch - no restart in postun detected"
fi
+
+yum -y install python-zaqarclient # needed for os-collect-config
+yum -y -q update
+
+# We need to ensure at least those two configuration settings, otherwise
+# mariadb 10.1+ won't activate galera replication.
+# wsrep_cluster_address must only be set though, its value does not
+# matter because it's overriden by the galera resource agent.
+cat >> /etc/my.cnf.d/galera.cnf <<EOF
+[mysqld]
+wsrep_on = ON
+wsrep_cluster_address = gcomm://localhost
+EOF
+
+if [ $DO_MYSQL_UPGRADE -eq 1 ]; then
+ # Scripts run via heat have no HOME variable set and this confuses
+ # mysqladmin
+ export HOME=/root
+
+ mkdir /var/lib/mysql || /bin/true
+ chown mysql:mysql /var/lib/mysql
+ chmod 0755 /var/lib/mysql
+ restorecon -R /var/lib/mysql/
+ mysql_install_db --datadir=/var/lib/mysql --user=mysql
+ chown -R mysql:mysql /var/lib/mysql/
+
+ if [ "$(hiera -c /etc/puppet/hiera.yaml bootstrap_nodeid)" = "$(facter hostname)" ]; then
+ mysqld_safe --wsrep-new-cluster &
+ # We have a populated /root/.my.cnf with root/password here so
+ # we need to temporarily rename it because the newly created
+ # db is empty and no root password is set
+ mv /root/.my.cnf /root/.my.cnf.temporary
+ timeout 60 sh -c 'while ! mysql -e "" &> /dev/null; do sleep 1; done'
+ mysql -u root < "$MYSQL_BACKUP_DIR/openstack_database.sql"
+ mv /root/.my.cnf.temporary /root/.my.cnf
+ mysqladmin -u root shutdown
+ # The import was successful so we may remove the folder
+ rm -r "$MYSQL_BACKUP_DIR"
+ fi
+fi
+
+# If we reached here without error we can safely blow away the origin
+# mysql dir from every controller
+
+# TODO: What if the upgrade fails on the bootstrap node, but not on
+# this controller. Data may be lost.
+if [ $DO_MYSQL_UPGRADE -eq 1 ]; then
+ rm -r $MYSQL_TEMP_UPGRADE_BACKUP_DIR
+fi
+
+# Let's reset the stonith back to true if it was true, before starting the cluster
+if [[ -n $(is_bootstrap_node) ]]; then
+ if [ -f /var/tmp/stonith-true ]; then
+ pcs -f /var/lib/pacemaker/cib/cib.xml property set stonith-enabled=true
+ fi
+ rm -f /var/tmp/stonith-true
+fi
+
+# Pin messages sent to compute nodes to kilo, these will be upgraded later
+crudini --set /etc/nova/nova.conf upgrade_levels compute "$upgrade_level_nova_compute"
+# https://bugzilla.redhat.com/show_bug.cgi?id=1284047
+# Change-Id: Ib3f6c12ff5471e1f017f28b16b1e6496a4a4b435
+crudini --set /etc/ceilometer/ceilometer.conf DEFAULT rpc_backend rabbit
+# https://bugzilla.redhat.com/show_bug.cgi?id=1284058
+# Ifd1861e3df46fad0e44ff9b5cbd58711bbc87c97 Swift Ceilometer middleware no longer exists
+crudini --set /etc/swift/proxy-server.conf pipeline:main pipeline "catch_errors healthcheck cache ratelimit tempurl formpost authtoken keystone staticweb proxy-logging proxy-server"
+# LP: 1615035, required only for M/N upgrade.
+crudini --set /etc/nova/nova.conf DEFAULT scheduler_host_manager host_manager
+# LP: 1627450, required only for M/N upgrade
+crudini --set /etc/nova/nova.conf DEFAULT scheduler_driver filter_scheduler
+
+crudini --set /etc/sahara/sahara.conf DEFAULT plugins ambari,cdh,mapr,vanilla,spark,storm
+
set -eu
-start_or_enable_service rabbitmq
-check_resource rabbitmq started 600
+cluster_form_timeout=600
+cluster_settle_timeout=1800
+galera_sync_timeout=600
+
+if [[ -n $(is_bootstrap_node) ]]; then
+ pcs cluster start --all
+
+ tstart=$(date +%s)
+ while pcs status 2>&1 | grep -E '(cluster is not currently running)|(OFFLINE:)'; do
+ sleep 5
+ tnow=$(date +%s)
+ if (( tnow-tstart > cluster_form_timeout )) ; then
+ echo_error "ERROR: timed out forming the cluster"
+ exit 1
+ fi
+ done
+
+ if ! timeout -k 10 $cluster_settle_timeout crm_resource --wait; then
+ echo_error "ERROR: timed out waiting for cluster to finish transition"
+ exit 1
+ fi
+
+ for vip in $(pcs resource show | grep ocf::heartbeat:IPaddr2 | grep Stopped | awk '{ print $1 }'); do
+ pcs resource enable $vip
+ check_resource_pacemaker $vip started 60
+ done
+fi
+
+start_or_enable_service galera
+check_resource galera started 600
start_or_enable_service redis
check_resource redis started 600
-start_or_enable_service openstack-cinder-volume
-check_resource openstack-cinder-volume started 600
+# We need mongod which is now a systemd service up and running before calling
+# ceilometer-dbsync. There is still a race here: mongod might not be up on all nodes
+# so ceilometer-dbsync will fail a couple of times before that. As it retries indefinitely
+# we should be good.
+# Due to LP Bug https://bugs.launchpad.net/tripleo/+bug/1627254 am using systemctl directly atm
+systemctl start mongod
+check_resource mongod started 600
-# start httpd so keystone is available for gnocchi
-# upgrade to run.
-systemctl start httpd
+if [[ -n $(is_bootstrap_node) ]]; then
+ tstart=$(date +%s)
+ while ! clustercheck; do
+ sleep 5
+ tnow=$(date +%s)
+ if (( tnow-tstart > galera_sync_timeout )) ; then
+ echo_error "ERROR galera sync timed out"
+ exit 1
+ fi
+ done
-# Swift isn't controled by pacemaker
-systemctl_swift start
+ # Run all the db syncs
+ # TODO: check if this can be triggered in puppet and removed from here
+ ceilometer-dbsync --config-file=/etc/ceilometer/ceilometer.conf
+ cinder-manage db sync
+ glance-manage --config-file=/etc/glance/glance-registry.conf db_sync
+ heat-manage --config-file /etc/heat/heat.conf db_sync
+ keystone-manage db_sync
+ neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugin.ini upgrade head
+ nova-manage db sync
+ nova-manage api_db sync
+ nova-manage db online_data_migrations
+ sahara-db-manage --config-file /etc/sahara/sahara.conf upgrade head
+fi
set -eu
-if [[ -n $(is_bootstrap_node) ]]; then
- # run gnocchi upgrade
- gnocchi-upgrade
-fi
+start_or_enable_service rabbitmq
+check_resource rabbitmq started 600
+start_or_enable_service redis
+check_resource redis started 600
+start_or_enable_service openstack-cinder-volume
+check_resource openstack-cinder-volume started 600
+
+# start httpd so keystone is available for gnocchi
+# upgrade to run.
+systemctl start httpd
+
+# Swift isn't controled by pacemaker
+systemctl_swift start
set -eu
-# We need to start the systemd services we explicitely stopped at step _1.sh
-# FIXME: Should we let puppet during the convergence step do the service enabling or
-# should we add it here?
-services=$(services_to_migrate)
-if [[ ${keep_sahara_services_on_upgrade} =~ [Ff]alse ]] ; then
- services=${services%%openstack-sahara*}
+if [[ -n $(is_bootstrap_node) ]]; then
+ # run gnocchi upgrade
+ gnocchi-upgrade
fi
-for service in $services; do
- manage_systemd_service start "${service%%-clone}"
- check_resource_systemd "${service%%-clone}" started 600
-done
--- /dev/null
+#!/bin/bash
+
+set -eu
+
+# We need to start the systemd services we explicitely stopped at step _1.sh
+# FIXME: Should we let puppet during the convergence step do the service enabling or
+# should we add it here?
+services=$(services_to_migrate)
+if [[ ${keep_sahara_services_on_upgrade} =~ [Ff]alse ]] ; then
+ services=${services%%openstack-sahara*}
+fi
+for service in $services; do
+ manage_systemd_service start "${service%%-clone}"
+ check_resource_systemd "${service%%-clone}" started 600
+done
config:
list_join:
- ''
- - - get_file: pacemaker_common_functions.sh
+ - - str_replace:
+ template: |
+ #!/bin/bash
+ upgrade_level_nova_compute='UPGRADE_LEVEL_NOVA_COMPUTE'
+ params:
+ UPGRADE_LEVEL_NOVA_COMPUTE: {get_param: UpgradeLevelNovaCompute}
+ - str_replace:
+ template: |
+ #!/bin/bash
+ mariadb_do_major_upgrade='MYSQL_MAJOR_UPGRADE'
+ params:
+ MYSQL_MAJOR_UPGRADE: {get_param: MySqlMajorUpgrade}
+ - get_file: pacemaker_common_functions.sh
+ - get_file: major_upgrade_check.sh
- get_file: major_upgrade_pacemaker_migrations.sh
- get_file: major_upgrade_controller_pacemaker_2.sh
input_values: {get_param: input_values}
ControllerPacemakerUpgradeConfig_Step5:
+ type: OS::Heat::SoftwareConfig
+ properties:
+ group: script
+ config:
+ list_join:
+ - ''
+ - - get_file: pacemaker_common_functions.sh
+ - get_file: major_upgrade_pacemaker_migrations.sh
+ - get_file: major_upgrade_controller_pacemaker_5.sh
+
+ ControllerPacemakerUpgradeDeployment_Step5:
+ type: OS::Heat::SoftwareDeploymentGroup
+ depends_on: ControllerPacemakerUpgradeDeployment_Step4
+ properties:
+ servers: {get_param: [servers, Controller]}
+ config: {get_resource: ControllerPacemakerUpgradeConfig_Step5}
+ input_values: {get_param: input_values}
+
+ ControllerPacemakerUpgradeConfig_Step6:
type: OS::Heat::SoftwareConfig
properties:
group: script
KEEP_SAHARA_SERVICES_ON_UPGRADE: {get_param: KeepSaharaServicesOnUpgrade}
- get_file: pacemaker_common_functions.sh
- get_file: major_upgrade_pacemaker_migrations.sh
- - get_file: major_upgrade_controller_pacemaker_5.sh
+ - get_file: major_upgrade_controller_pacemaker_6.sh
- ControllerPacemakerUpgradeDeployment_Step5:
+ ControllerPacemakerUpgradeDeployment_Step6:
type: OS::Heat::SoftwareDeploymentGroup
- depends_on: ControllerPacemakerUpgradeDeployment_Step4
+ depends_on: ControllerPacemakerUpgradeDeployment_Step5
properties:
servers: {get_param: [servers, Controller]}
- config: {get_resource: ControllerPacemakerUpgradeConfig_Step5}
+ config: {get_resource: ControllerPacemakerUpgradeConfig_Step6}
input_values: {get_param: input_values}
Code Review / apex-tripleo-heat-templates.git / commitdiff