Altering the heading levels to fit into the composite docs user guide.

Is required or it leaves the context of the document segment in the
userguide.

Change-Id: Idb476b7926ba0fce11ed3be54eaa6837e34bff66
Signed-off-by: ChristopherPrice <christopher.price@ericsson.com>

diff --git a/docs/userguide/quickstart.rst b/docs/userguide/quickstart.rst
index a72a3eb..f06bfc2 100755 (executable)
--- a/docs/userguide/quickstart.rst
+++ b/docs/userguide/quickstart.rst
@@ -2,12 +2,11 @@
 .. http://creativecommons.org/licenses/by/4.0
 .. (c) OPNFV, Intel Corporation, AT&T and others.
 
-=============================
-Getting Started with 'vsperf'
-=============================
+vSwitchPerf test suites userguide
+---------------------------------
 
 General
--------
+^^^^^^^
 
 VSPERF requires a traffic generators to run tests, automated traffic gen
 support in VSPERF includes:
@@ -23,20 +22,22 @@ option as shown in `Traffic generator instructions
 <http://artifacts.opnfv.org/vswitchperf/docs/configguide/trafficgen.html>`__
 
 VSPERF Installation
---------------------
+^^^^^^^^^^^^^^^^^^^
+
 To see the supported Operating Systems, vSwitches and system requirements,
 please follow the `installation instructions
 <http://artifacts.opnfv.org/vswitchperf/docs/configguide/installation.html>`__ to
 install.
 
 Traffic Generator Setup
------------------------
+^^^^^^^^^^^^^^^^^^^^^^^
+
 Follow the `Traffic generator instructions
 <http://artifacts.opnfv.org/vswitchperf/docs/configguide/trafficgen.html>`__ to
 install and configure a suitable traffic generator.
 
 Cloning and building src dependencies
--------------------------------------
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 In order to run VSPERF, you will need to download DPDK and OVS. You can
 do this manually and build them in a preferred location, OR you could
@@ -70,7 +71,8 @@ use:
      $ make clobber
 
 Configure the ``./conf/10_custom.conf`` file
---------------------------------------------
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
 The ``10_custom.conf`` file is the configuration file that overrides
 default configurations in all the other configuration files in ``./conf``
 The supplied ``10_custom.conf`` file **MUST** be modified, as it contains
@@ -82,7 +84,7 @@ contents. Any configuration item mentioned in any .conf file in
 the custom configuration value.
 
 Using a custom settings file
-----------------------------
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 If your ``10_custom.conf`` doesn't reside in the ``./conf`` directory
 of if you want to use an alternative configuration file, the file can
@@ -102,7 +104,8 @@ described like so (1 = max priority):
 3. Configuration file(s)
 
 vloop_vnf
----------
+^^^^^^^^^
+
 vsperf uses a VM called vloop_vnf for looping traffic in the PVP and PVVP
 deployment scenarios. The image can be downloaded from
 `<http://artifacts.opnfv.org/>`__.
@@ -119,13 +122,14 @@ vloop_vnf forwards traffic through a VM using one of:
 Alternatively you can use your own QEMU image.
 
 l2fwd Kernel Module
--------------------
+^^^^^^^^^^^^^^^^^^^
+
 A Kernel Module that provides OSI Layer 2 Ipv4 termination or forwarding with
 support for Destination Network Address Translation (DNAT) for both the MAC and
 IP addresses. l2fwd can be found in <vswitchperf_dir>/src/l2fwd
 
 Executing tests
----------------
+^^^^^^^^^^^^^^^
 
 Before running any tests make sure you have root permissions by adding
 the following line to /etc/sudoers:
@@ -179,7 +183,7 @@ For all available options, check out the help dialog:
     $ ./vsperf --help
 
 Executing Vanilla OVS tests
-----------------------------
+^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
 1. If needed, recompile src for all OVS variants
 
@@ -216,7 +220,8 @@ set the ports.
 
 
 Executing PVP and PVVP tests
-----------------------------
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
 To run tests using vhost-user as guest access method:
 
 1. Set VHOST_METHOD and VNF of your settings file to:
@@ -264,7 +269,8 @@ To run tests using vhost-cuse as guest access method:
      $ ./vsperf --conf-file=<path_to_custom_conf>/10_custom.conf
 
 Executing PVP tests using Vanilla OVS
--------------------------------------
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
 To run tests using Vanilla OVS:
 
 1. Set the following variables:
@@ -284,9 +290,9 @@ To run tests using Vanilla OVS:
 
    or use --test-param
 
-   ./vsperf --conf-file=<path_to_custom_conf>/10_custom.conf
-            --test-param "vanilla_tgen_tx_ip=n.n.n.n;
-                          vanilla_tgen_tx_mac=nn:nn:nn:nn:nn:nn"
+   $ ./vsperf --conf-file=<path_to_custom_conf>/10_custom.conf
+              --test-param "vanilla_tgen_tx_ip=n.n.n.n;
+                            vanilla_tgen_tx_mac=nn:nn:nn:nn:nn:nn"
 
 
 2. If needed, recompile src for all OVS variants
@@ -304,7 +310,8 @@ To run tests using Vanilla OVS:
      $ ./vsperf --conf-file<path_to_custom_conf>/10_custom.conf
 
 Selection of loopback application for PVP and PVVP tests
---------------------------------------------------------
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
 To select loopback application, which will perform traffic forwarding
 inside VM, following configuration parameter should be configured:
 
@@ -334,7 +341,8 @@ will not be forwarded by VM and testcases with PVP and PVVP deployments
 will fail. Guest loopback application is set to 'testpmd' by default.
 
 Code change verification by pylint
-----------------------------------
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
 Every developer participating in VSPERF project should run
 pylint before his python code is submitted for review. Project
 specific configuration for pylint is available at 'pylint.rc'.
@@ -346,10 +354,11 @@ Example of manual pylint invocation:
           $ pylint --rcfile ./pylintrc ./vsperf
 
 GOTCHAs:
---------
+^^^^^^^^
 
 OVS with DPDK and QEMU
 ~~~~~~~~~~~~~~~~~~~~~~~
+
 If you encounter the following error: "before (last 100 chars):
 '-path=/dev/hugepages,share=on: unable to map backing store for
 hugepages: Cannot allocate memory\r\n\r\n" with the PVP or PVVP
@@ -368,3 +377,9 @@ an appropriate amount of memory:
 
     VSWITCHD_DPDK_ARGS = ['-c', '0x4', '-n', '4', '--socket-mem 1024,0']
 
+More information
+^^^^^^^^^^^^^^^^
+
+For more information and details refer to the vSwitchPerf user guide at:
+http://artifacts.opnfv.org/vswitchperf/brahmaputra/userguide/index.html
+