Revert "docs: userguide ipmi instructions"

This reverts commit 13cdb2e79b521e4251d746b95cf09fd98620a046.

Change-Id: Ie3d0e258102b8079f40f489c478bd4cb79aa5021
Signed-off-by: Maryam Tahhan <maryam.tahhan@intel.com>

diff --git a/docs/userguide/collectd.userguide.rst b/docs/userguide/collectd.userguide.rst
index c2fa861..d86eb32 100644 (file)
--- a/docs/userguide/collectd.userguide.rst
+++ b/docs/userguide/collectd.userguide.rst
@@ -42,10 +42,8 @@ Other plugins under development or existing as a pull request into collectd mast
   collectd metrics to relavent OIDs. Will only support SNMP: get, getnext and
   walk.
 
-* Legacy/IPMI: A read plugin that reports platform thermals, voltages,
-  fanspeed, current, flow, power etc. Also, the plugin monitors Intelligent
-  Platform Management Interface (IPMI) System Event Log (SEL) and sends the
-  collectd notification once a new record appears in the SEL.
+* Legacy/IPMI: A read plugin that will report platform thermals, voltages,
+  fanspeed....
 
 Building collectd with the Barometer plugins and installing the dependencies
 =============================================================================
@@ -248,87 +246,6 @@ include:
 For more information on the plugin parameters, please see:
 https://github.com/collectd/collectd/blob/master/src/collectd.conf.pod
 
-IPMI Plugin
------------
-Repo: https://github.com/maryamtahhan/collectd
-
-Branch: feat_ipmi_events, feat_ipmi_analog
-
-Dependencies: OpenIPMI library
-
-The IPMI plugin is already implemented in the latest collectd and sensors
-like temperature, voltage, fanspeed, current are already supported there.
-The list of supported IPMI sensors has been extended and sensors like flow,
-power are supported now. Also, a System Event Log (SEL) notification feature
-has been introduced.
-
-* The feat_ipmi_events branch includes new SEL feature support in collectd
-  IPMI plugin. If this feature is enabled, the collectd IPMI plugin will
-  dispatch notifications about new events in System Event Log.
-
-* The feat_ipmi_analog branch includes the support of extended IPMI sensors in
-  collectd IPMI plugin.
-
-On Ubuntu, install the dependencies:
-
-.. code:: bash
-
-    $ sudo apt-get install libopenipmi-dev
-
-Enable IPMI support in the kernel:
-
-.. code:: bash
-
-    $ sudo modprobe ipmi_devintf
-    $ sudo modprobe ipmi_si
-
-**Note**: If HW supports IPMI, the ``/dev/ipmi0`` character device will be
-created.
-
-Clone and install the collectd IPMI plugin:
-
-.. code:: bash
-
-    $ git clone  https://github.com/maryamtahhan/collectd
-    $ cd collectd
-    $ git checkout $BRANCH
-    $ ./build.sh
-    $ ./configure --enable-syslog --enable-logfile --enable-debug
-    $ make
-    $ sudo make install
-
-Where $BRANCH is feat_ipmi_events or feat_ipmi_analog.
-
-This will install collectd to default folder ``/opt/collectd``. The collectd
-configuration file (``collectd.conf``) can be found at ``/opt/collectd/etc``. To
-configure the IPMI plugin you need to modify the file to include:
-
-.. code:: bash
-
-    LoadPlugin ipmi
-    <Plugin ipmi>
-       SELEnabled true # only feat_ipmi_events branch supports this
-    </Plugin>
-
-**Note**: By default, IPMI plugin will read all available analog sensor values,
-dispatch the values to collectd and send SEL notifications.
-
-For more information on the IPMI plugin parameters and SEL feature configuration,
-please see:
-
-https://github.com/maryamtahhan/collectd/blob/feat_ipmi_events/src/collectd.conf.pod
-
-Extended analog sensors support doesn't require addition configuration. The usual
-collectd IPMI documentation can be used.
-
-https://collectd.org/wiki/index.php/Plugin:IPMI
-https://collectd.org/documentation/manpages/collectd.conf.5.shtml#plugin_ipmi
-
-IPMI documentation:
-
-https://www.kernel.org/doc/Documentation/IPMI.txt
-http://www.intel.com/content/www/us/en/servers/ipmi/ipmi-second-gen-interface-spec-v2-rev1-1.html
-
 Mcelog Plugin:
 --------------
 Repo: https://github.com/collectd/collectd
@@ -659,13 +576,13 @@ To see this demo in action please checkout: `Barometer OPNFV Summit demo`_
 
 References
 ----------
-.. [1] https://collectd.org/wiki/index.php/Naming_schema
-.. [2] https://github.com/collectd/collectd/blob/master/src/daemon/plugin.h
-.. [3] https://collectd.org/wiki/index.php/Value_list_t
-.. [4] https://collectd.org/wiki/index.php/Data_set
-.. [5] https://collectd.org/documentation/manpages/types.db.5.shtml
-.. [6] https://collectd.org/wiki/index.php/Data_source
-.. [7] https://collectd.org/wiki/index.php/Meta_Data_Interface
+[1] https://collectd.org/wiki/index.php/Naming_schema
+[2] https://github.com/collectd/collectd/blob/master/src/daemon/plugin.h
+[3] https://collectd.org/wiki/index.php/Value_list_t
+[4] https://collectd.org/wiki/index.php/Data_set
+[5] https://collectd.org/documentation/manpages/types.db.5.shtml
+[6] https://collectd.org/wiki/index.php/Data_source
+[7] https://collectd.org/wiki/index.php/Meta_Data_Interface
 
 .. _Barometer OPNFV Summit demo: https://prezi.com/kjv6o8ixs6se/software-fastpath-service-quality-metrics-demo/
 .. _ceilometer plugin: https://github.com/openstack/collectd-ceilometer-plugin/tree/stable/mitaka