-============================================================================
-OPNFV Build instruction for the Fuel deployment tool
-============================================================================
+================================================================================================
+OPNFV Build instruction for the Brahmaputra release of OPNFV when using Fuel as a deployment tool
+================================================================================================
.. contents:: Table of Contents
:backlinks: none
+License
+=======
+
+This work is licensed under a Creative Commons Attribution 4.0
+International License. .. http://creativecommons.org/licenses/by/4.0 ..
+(c) Jonas Bjurel (Ericsson AB) and others
+
Abstract
========
This document describes how to build the Fuel deployment tool for the
-B release of OPNFV - the build system, dependencies and required
+Brahmaputra release of OPNFV build system, dependencies and required
system resources.
-
-License
-=======
-Brahmaputra release of OPNFV when using Fuel as a deployment tool DOCs (c) by Jonas Bjurel (Ericsson AB) and others.
-
-This document is licensed under a Creative Commons Attribution 4.0 International License. You should have received a copy of the license along with this. If not, see <http://creativecommons.org/licenses/by/4.0/>.
-
-
Introduction
============
- An x86_64 host (Bare-metal or VM) with Ubuntu 14.04 LTS installed
- - A kernel equal or later than 3.19 (Vivid) (simply available through sudo apt-get install linux-generic-lts-vivid)
+ - A kernel equal- or later than 3.19 (Vivid) (simply available through sudo apt-get install linux-generic-lts-vivid)
- **Note:** Builds on Wily (Ubuntu 15.x) are currently not supported
-- docker - see https://docs.docker.com/engine/installation/ubuntulinux/ for installation notes for Ubuntu 14.04. Tested against ver 1.9.x and greater
+- docker - see https://docs.docker.com/engine/installation/ubuntulinux/ for installation notes for Ubuntu 14.04. Tested against version 1.9.x and greater
-- git (simply available through sudo apt-get install git)
+- git (simply available through $ sudo apt-get install git)
-- make (simply available through sudo apt-get install make)
+- make (simply available through $ sudo apt-get install make)
-- curl (simply available through sudo apt-get install curl)
+- curl (simply available through $ sudo apt-get install curl)
Preparations
============
-------------------------------------
After having installed Docker, add yourself to the docker group:
-<sudo usermod -a -G docker [userid]>
+$ sudo usermod -a -G docker [userid]
+
+Also make sure to define relevant DNS servers part of the global
+DNS chain in your </etc/default/docker> configuration file.
+Uncomment, and modify the values appropriately.
-Also make sure to define relevant DNS servers part of the global dns chain in
-in your </etc/default/docker> configuration file. Uncomment, modify the values appropriately
-and save and quit the file. For example:
+For example:
<DOCKER_OPTS=" --dns=8.8.8.8 --dns=8.8.8.4">
Then restart docker:
-<sudo service docker restart>
+.. code-block:: console
+
+$ sudo service docker restart
Setting up OPNFV Gerrit in order to being able to clone the code
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Now it is time to clone the code repository:
-<git clone ssh://'Linux foundation user'@gerrit.opnfv.org:29418/fuel>
+$ git clone ssh://<Linux foundation user>@gerrit.opnfv.org:29418/fuel
Now you should have the OPNFV fuel repository with the Fuel
directories stored locally on your build host.
Check out the Brahmaputra release:
-<cd fuel>
-<git checkout insert-b-release-tag-here0>
+$ cd fuel
+$ git checkout brahmaputra.1.0
Clone the OPNFV code Git repository without a SSH key
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
You can also opt to clone the code repository without a SSH key:
-<git clone https://gerrit.opnfv.org:29418/gerrit/fuel>
+$ git clone https://gerrit.opnfv.org:29418/gerrit/fuel
Make sure to checkout the release tag as described above.
If the proxy setup is not allowing the rsync protocol, an alternative
solution is to use a SSH tunnel to a machine capable of accessing the
outbound port 873. Set the RSYNC_CONNECT_PROG according to the rsync
-manual page (for example to "ssh <username>@<hostname> nc %H 873") to enable
-this. Also note that netcat needs to be installed on the remote
-system!
+manual page (for example to "ssh <username>@<hostname> nc %H 873")
+to enable this. Also note that netcat needs to be installed on the
+remote system!
Make sure that the ssh command also refers to the user on the remote
system, as the command itself will be run from the Docker build container
Configure your build environment
--------------------------------
-** Configuring the build environment should not be performed if building standard Brahmaputra release **
+** Configuring the build environment should not be performed if building
+standard Brahmaputra release **
-Select the versions of the components you want to build by editing the fuel/build/config.mk file.
+Select the versions of the components you want to build by editing the
+fuel/build/config.mk file.
Non official build: Selecting which plugins to build
----------------------------------------------------
specified in the environment variable will then be built. In order to
completely disable the building of plugins, the environment variable
is set to " ". When using this functionality, the resulting iso file
-will be prepended with the prefix "unofficial-" to clearly indiciate
+will be prepended with the prefix "unofficial-" to clearly indicate
that this is not a full build.
This method of plugin selection is not meant to be used from within
- none/all - this will:
- - If not already existing, initialize the docker build environment
+ - Initialize the docker build environment
- - If not already done, build OpenDaylight from upstream (as defined
- by fuel-build config-spec)
+ - Build Fuel from upstream (as defined by fuel-build/config-spec)
- - If not already done, build fuel from upstream (as defined by
- fuel-build/config-spec)
+ - Build the OPNFV defined plugins/features from upstream
- Build the defined additions to fuel (as defined by the structure
of this framework)
References
==========
--
+1) OPNFV Installation instruction for the Brahmaputra release of OPNFV when using Fuel as a deployment tool
+
+2) OPNFV Build instruction for the Brahmaputra release of OPNFV when using Fuel as a deployment tool
+
+3) OPNFV Release Note for the Brahmaputra release of OPNFV when using Fuel as a deployment tool
Fuel configuration
==================
-This section provides brief guidelines on how to install and
+This section provides guidelines on how to install and
configure the Brahmaputra release of OPNFV when using Fuel as a
deployment tool including required software and hardware
configurations.
-For detailed instructions on how to install the Brahmaputra release using Fuel, see:<TODO>
+For detailed instructions on how to install the Brahmaputra release using
+Fuel, see *Reference 13* in section *"Fuel associated references"* below.
Pre-configuration activities
----------------------------
Familiarize yourself with the Fuel by reading the
following documents:
-- Fuel planning guide <https://docs.mirantis.com/openstack/fuel/fuel-7.0/planning-guide.html>
+- Fuel planning guide, please see *Reference: 8* in section *"Fuel associated references"* below.
-- Fuel user guide <http://docs.mirantis.com/openstack/fuel/fuel-7.0/user-guide.html>
+- Fuel user guide, please see *Reference: 9* in section *"Fuel associated references"* below.
-- Fuel operations guide <http://docs.mirantis.com/openstack/fuel/fuel-7.0/operations.html>
+- Fuel operations guide, please see *Reference: 10* in section *"Fuel associated references"* below.
+- Fuel Plugin Developers Guide, please see *Reference: 11* in section *"Fuel associated references"* below.
Before the installation can start, a number of deployment specific parameters must be collected, those are:
Retrieving the ISO image
^^^^^^^^^^^^^^^^^^^^^^^^
First of all, the Fuel deployment ISO image needs to be retrieved, the
-.iso image of the Brahmaputra release of OPNFV when using Fuel as
-a deployment tool can be found at: <TODO>
+Fuel .iso image of the Brahmaputra release can be found at *Reference: 2*
Alternatively, you may build the .iso from source by cloning the
opnfv/fuel git repository. Detailed instructions on how to build
-a Fuel OPNFV .iso can be found here: <TODO>
+a Fuel OPNFV .iso can be found in *Reference: 14* at section *"Fuel associated references"* below.
Hardware requirements
---------------------
| | over other nics as your hardware supports |
+--------------------+------------------------------------------------------+
-For a detailed hardware compatibility matrix - please see:
-<https://www.mirantis.com/products/openstack-drivers-and-plugins/hardware-compatibility-list/>
+For information on compatible hardware types available for use, please see
+*Reference: 11* in section *"Fuel associated references"* below.
Top of the rack (TOR) Configuration requirements
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
The switching infrastructure provides connectivity for the OPNFV
infrastructure operations, tenant networks (East/West) and provider
connectivity (North/South); it also provides needed
-connectivity for the storage Area Network (SAN). To avoid traffic
+connectivity for the Storage Area Network (SAN). To avoid traffic
congestion, it is strongly suggested that three physically separated
networks are used, that is: 1 physical network for administration and
control, one physical network for tenant private and public networks,
infrastructure as well as the provider networks and the private tenant
VLANs needs to be manually configured.
-Manual configuration of the Brahmaputra hardware platform should
-be carried out according to the OPNFV Pharos specification <TODO>
-
Jumphost configuration
----------------------
The Jumphost server, also known as the "Fuel master" provides needed
Install the Fuel jump-host
^^^^^^^^^^^^^^^^^^^^^^^^^^
Mount the Fuel Brahmaputra ISO file as a boot device to the jump host
-server, reboot it, and install the Fuel Jumphost in accordance with the
-instructions found here: <TODO>
+server, reboot it, and install the Fuel Jumphost in accordance with installation instructions, see *Reference 13* in section *"Fuel associated references"*
+below.
Platform components configuration
for compatibility information**
The plugins come prepackaged, ready to install. To do so follow the
-instructions provided here: <TODO>
+installation instructions provided in *Reference 13* provided in section
+*"Fuel associated references"* below.
Fuel environment
^^^^^^^^^^^^^^^^
one Fuel instance can manage several OpenStack instances/environments
with different configurations, etc.
-To create a Fuel instance, follow the instructions provided
-here: <TODO>
+To create a Fuel instance, follow the instructions provided in the installation
+instructions, see *Reference 13* in section *"Fuel associated references"* below.
Provisioning of aditional features and services
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Although the plugins have already previously been installed,
they are not per default enabled for the environment we just created.
-The plugins of you choice need to be enabled and configured.
+The plugins of your choice need to be enabled and configured.
-To enable a plugin, follow the instructions in the installation instructions <TODO>
+To enable a plugin, follow the installation instructions found in
+*Reference 13*, provided in section *"Fuel associated references"* below.
For configuration of the plugins, please refer to the corresponding feature in the ????? <TODO>
- etc.
For guidelines on how to configure networking, please refer to the
-installation instructions here: <TODO>
+installation instructions found in *Reference 13* provided in section
+*"Fuel associated references"* below.
Node allocation
^^^^^^^^^^^^^^^
others may not. The Fuel GUI will guide you in the allocation of roles and
will not permit you to perform invalid allocations.
-For detailed guide-lines on node allocation, please refer to the installation instructions: <TODO>
+For detailed guide-lines on node allocation, please refer to the installation instructions found in *Reference 13*, provided in section *"Fuel associated references"* below.
Off-line deployment
^^^^^^^^^^^^^^^^^^^
Fuel jump-start server.
For instructions on how to configure Fuel for off-line deployment, please
-refer to the installation instructions: <TODO>
+refer to the installation instructions found in, *Reference 13*, provided
+in section *"Fuel associated references"* below.
Deployment
^^^^^^^^^^
You should now be ready to deploy your OPNFV Brahmaputra environment - but before doing so you may want to verify your network settings.
For further details on network verification and deployment, please refer to
-the installation instructions: <TODO>
+the installation instructions found in, *Reference 13*, provided in section
+*"Fuel associated references"* below.
+
+Fuel associated references
+--------------------------
+
+OPNFV
+~~~~~
+
+1) `OPNFV Home Page <www.opnfv.org>`_
+
+2) `OPNFV documentation- and software downloads <https://www.opnfv.org/software/download>`_
+
+OpenStack
+~~~~~~~~~
+
+3) `OpenStack Liberty Release artifacts <http://www.openstack.org/software/liberty>`_
+
+4) `OpenStack documentation <http://docs.openstack.org>`_
+
+OpenDaylight
+~~~~~~~~~~~~
+
+5) `OpenDaylight artifacts <http://www.opendaylight.org/software/downloads>`_
+
+Fuel
+~~~~
+
+6) `The Fuel OpenStack project <https://wiki.openstack.org/wiki/Fuel>`_
+
+7) `Fuel documentation overview <https://docs.fuel-infra.org/openstack/fuel/fuel-7.0/#guides>`_
+
+8) `Fuel planning guide <https://docs.mirantis.com/openstack/fuel/fuel-7.0/planning-guide.html>`_
+
+9) `Fuel user guide <http://docs.mirantis.com/openstack/fuel/fuel-7.0/user-guide.html>`_
+
+10) `Fuel operations guide <http://docs.mirantis.com/openstack/fuel/fuel-7.0/operations.html>`_
+
+11) `Fuel Plugin Developers Guide <https://wiki.openstack.org/wiki/Fuel/Plugins>`_
+
+12) `Fuel OpenStack Hardware Compatibility List <https://www.mirantis.com/products/openstack-drivers-and-plugins/hardware-compatibility-list>`_
+
+Fuel in OPNFV
+~~~~~~~~~~~~~
+
+13) OPNFV Installation instruction for the Brahmaputra release of OPNFV when using Fuel as a deployment tool
+
+14) OPNFV Build instruction for the Brahmaputra release of OPNFV when using Fuel as a deployment tool
+
+15) OPNFV Release Note for the Brahmaputra release of OPNFV when using Fuel as a deployment tool
networking, storage, policies, etc.
The execution of the full range of health checks takes less than 30 minutes.
-For instructions on how to run health-checks, please refer to the installation instructions: <TODO>
+For instructions on how to run health-checks, please refer to the Fuel installation instructions.
Platform components validation
------------------------------
Consult the feature sections in this document for any post-install
feature specific validation/health-checks.
+
.. contents:: Table of Contents
:backlinks: none
+License
+=======
+
+This work is licensed under a Creative Commons Attribution 4.0 International
+License. .. http://creativecommons.org/licenses/by/4.0 ..
+(c) Jonas Bjurel (Ericsson AB) and others
+
Abstract
========
+
This document describes how to install the Brahmaputra release of
OPNFV when using Fuel as a deployment tool, covering it's usage,
limitations, dependencies and required system resources.
-License
-=======
-Brahmaputra release of OPNFV when using Fuel as a deployment tool
-Docs (c) by Jonas Bjurel (Ericsson AB)
-
-This document is licensed under a Creative Commons Attribution 4.0
-International License. You should have received a copy of the license
-along with this document. If not, see
-<http://creativecommons.org/licenses/by/4.0/>.
-
Introduction
============
------------------------
First of all, the Fuel deployment ISO image needs to be retrieved, the
-Fuel .iso image of the Brahmaputra release can be found at <TODO>
+Fuel .iso image of the Brahmaputra release can be found at *Reference: 2*
Building the ISO image
----------------------
Alternatively, you may build the Fuel .iso from source by cloning the
-opnfv/fuel git repository. To retrieve the repository for the Brahmaputra
-release use the following command:
+opnfv/fuel git repository. To retrieve the repository for the Brahmaputra release use the following command:
$git clone https://<linux foundation uid>@gerrit.opnf.org/gerrit/fuel
Check-out the Brahmaputra release tag to set the branch to the
baseline required to replicate the Brahmaputra release:
-$ git checkout stable/<TODO>
+$ git checkout brahmaputra.1.0
Go to the fuel directory and build the .iso:
$ cd fuel/build; make all
-For more information on how to build, please see "OPNFV Build
-instructions for - Brahmaputra release of OPNFV when using Fuel as
-a deployment tool which you retrieved with the repository at
-</fuel/fuel/docs/src/build-instructions.rst> <TODO>
+For more information on how to build, please see *Reference: 14*
+
+Other preparations
+------------------
Next, familiarize yourself with Fuel by reading the following documents:
-- Fuel planning guide <https://docs.mirantis.com/openstack/fuel/fuel-7.0/planning-guide.html>
+- Fuel planning guide, please see *Reference: 8*
-- Fuel user guide <http://docs.mirantis.com/openstack/fuel/fuel-7.0/user-guide.html>
+- Fuel user guide, please see *Reference: 9*
-- Fuel operations guide <http://docs.mirantis.com/openstack/fuel/fuel-7.0/operations.html>
+- Fuel operations guide, please see *Reference: 10*
-- Fuel Plugin Developers Guide <https://wiki.openstack.org/wiki/Fuel/Plugins>
+- Fuel Plugin Developers Guide, please see *Reference: 11*
Prior to installation, a number of deployment specific parameters must be collected, those are:
Calculate hardware requirements:
-Refer to the OpenStack Hardware Compatibility List:
-<https://www.mirantis.com/products/openstack-drivers-and-plugins/hardware-compatibility-list/>
-for more information on various hardware types available for use.
+For information on compatible hardware types available for use, please see *Reference: 11*.
When choosing the hardware on which you will deploy your OpenStack
environment, you should think about:
The switching infrastructure provides connectivity for the OPNFV
infrastructure operations, tenant networks (East/West) and provider
connectivity (North/South); it also provides needed connectivity for
-the storage Area Network (SAN).
+the Storage Area Network (SAN).
To avoid traffic congestion, it is strongly suggested that three
physically separated networks are used, that is: 1 physical network
for administration and control, one physical network for tenant private
- Replace the URI values for the "Name" values outlined below:
- - "ubuntu" URI="deb http://<ip-of-fuel-server>:8080/ubuntu-part trusty main"
-
- - "ubuntu-security" URI="deb http://<ip-of-fuel-server>:8080/ubuntu-part trusty main"
+ - "ubuntu" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ trusty main"
- - "ubuntu-updates" URI="deb http://<ip-of-fuel-server>:8080/ubuntu-part trusty main"
+ - "ubuntu-security" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ trusty-security main"
- - "mos-updates" URI="deb http://<ip-of-fuel-server>:8080/mos-ubuntu mos8.0-updates main restricted"
+ - "ubuntu-updates" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ trusty-updates main"
- - "mos-security" URI="deb http://<ip-of-fuel-server>:8080/mos-ubuntu mos8.0-security main restricted"
+ - "mos" URI="deb http://<ip-of-fuel-server>::8080/liberty-8.0/ubuntu/x86_64 mos8.0 main restricted"
- - "mos-holdback" URI="deb http://<ip-of-fuel-server>:8080/mos-ubuntu mos8.0-holdback main restricted"
+ - "Auxiliary" URI="deb http://<ip-of-fuel-server>:8080/liberty-8.0/ubuntu/auxiliary auxiliary main restricted"
- Click <Save Settings> at the bottom to Save your changes
OPNFV
-----
-`OPNFV Home Page <www.opnfv.org>`_
+1) `OPNFV Home Page <www.opnfv.org>`_
+
+2) `OPNFV documentation- and software downloads <https://www.opnfv.org/software/download>`_
OpenStack
---------
-`OpenStack Liberty Release artifacts <http://www.openstack.org/software/liberty>`_
+3) `OpenStack Liberty Release artifacts <http://www.openstack.org/software/liberty>`_
-`OpenStack documentation <http://docs.openstack.org>`_
+4) `OpenStack documentation <http://docs.openstack.org>`_
OpenDaylight
------------
-`OpenDaylight artifacts <http://www.opendaylight.org/software/downloads>`_
+5) `OpenDaylight artifacts <http://www.opendaylight.org/software/downloads>`_
Fuel
----
-`Fuel documentation <https://wiki.openstack.org/wiki/Fuel>`_
+6) `The Fuel OpenStack project <https://wiki.openstack.org/wiki/Fuel>`_
+
+7) `Fuel documentation overview <https://docs.fuel-infra.org/openstack/fuel/fuel-7.0/#guides>`_
+
+8) `Fuel planning guide <https://docs.mirantis.com/openstack/fuel/fuel-7.0/planning-guide.html>`_
+
+9) `Fuel user guide <http://docs.mirantis.com/openstack/fuel/fuel-7.0/user-guide.html>`_
+
+10) `Fuel operations guide <http://docs.mirantis.com/openstack/fuel/fuel-7.0/operations.html>`_
+
+11) `Fuel Plugin Developers Guide <https://wiki.openstack.org/wiki/Fuel/Plugins>`_
+
+12) `Fuel OpenStack Hardware Compatibility List <https://www.mirantis.com/products/openstack-drivers-and-plugins/hardware-compatibility-list>`_
+
+Fuel in OPNFV
+-------------
+
+13) OPNFV Installation instruction for the Brahmaputra release of OPNFV when using Fuel as a deployment tool
+
+14) OPNFV Build instruction for the Brahmaputra release of OPNFV when using Fuel as a deployment tool
+
+15) OPNFV Release Note for the Brahmaputra release of OPNFV when using Fuel as a deployment tool
.. contents:: Table of Contents
:backlinks: none
-Abstract
-========
-
-This document compiles the release notes for the Brahmaputra release of
-OPNFV when using Fuel as a deployment tool.
-
License
=======
-Brahmaputra release with the Fuel deployment tool Docs (c) by Jonas
-Bjurel (Ericsson AB)
+This work is licensed under a Creative Commons Attribution 4.0 International
+License. .. http://creativecommons.org/licenses/by/4.0 ..
+(c) Jonas Bjurel (Ericsson AB) and others
-This document is licensed under a Creative Commons Attribution 4.0
-International License.
+Abstract
+========
-You should have received a copy of the license along with this document.
-If not, see <http://creativecommons.org/licenses/by/4.0/>.
+This document compiles the release notes for the Brahmaputra release of
+OPNFV when using Fuel as a deployment tool.
Important notes
===============
to establish a lab ready platform accelerating further development
of the OPNFV infrastructure.
-Carefully follow the installation-instructions.
+Carefully follow the installation-instructions provided in *Reference 13*.
Summary
=======
| **Project** | fuel |
| | |
+--------------------------------------+--------------------------------------+
-| **Repo/tag** | fuel/<TODO> |
+| **Repo/tag** | brahmaputra.1.0 |
| | |
+--------------------------------------+--------------------------------------+
| **Release designation** | Brahmaputra base release |
| | |
+--------------------------------------+--------------------------------------+
-| **Release date** | <TODO> |
+| **Release date** | February 25 2016 |
| | |
+--------------------------------------+--------------------------------------+
| **Purpose of the delivery** | Brahmaputra base release |
- OpenStack Liberty release
-- OpenDaylight Beryllium pre-release
+- OpenDaylight Beryllium pre-release <TODO>
- ONOS Drake release
This is the third tracked version of the fuel installer for OPNFV. It
comes with the following documentation:
-- OPNFV Installation instructions for Brahmaputra with Fuel as deployment tool - **Changed**
+- Installation instructions - *Reference 13* - **Changed**
-- OPNFV Release Notes for Brahmaputra use of Fuel as deployment tool - **Changed**
+- Build instructions - *Reference 14* - **Changed**
-- OPNFV Build instructions for Brahmaputra with Fuel as deployment tool - **Changed**
+- Release notes - *Reference 15* - **Changed** (This document)
Reason for version
------------------
Software deliverables
~~~~~~~~~~~~~~~~~~~~~
-Fuel-based installer iso file <TODO>
+Fuel-based installer iso file found in *Reference 2*
Documentation deliverables
~~~~~~~~~~~~~~~~~~~~~~~~~~
-- OPNFV Installation instructions for Brahmaputra release with the Fuel deployment tool
+- Installation instructions - *Reference 13*
-- OPNFV Build instructions for Brahmaputra release with the Fuel deployment
- tool
+- Build instructions - *Reference 14*
-- OPNFV Release Note for Brahmaputra release with the Fuel deployment tool - (this document)
+- Release notes - *Reference 15* (This document)
Known Limitations, Issues and Workarounds
=========================================
References
==========
For more information on the OPNFV Brahmaputra release, please see
-<TODO>
+
+OPNFV
+-----
+
+1) `OPNFV Home Page <www.opnfv.org>`_
+
+2) `OPNFV documentation- and software downloads <https://www.opnfv.org/software/download>`_
+
+OpenStack
+---------
+
+3) `OpenStack Liberty Release artifacts <http://www.openstack.org/software/liberty>`_
+
+4) `OpenStack documentation <http://docs.openstack.org>`_
+
+OpenDaylight
+------------
+
+5) `OpenDaylight artifacts <http://www.opendaylight.org/software/downloads>`_
+
+Fuel
+----
+
+6) `The Fuel OpenStack project <https://wiki.openstack.org/wiki/Fuel>`_
+
+7) `Fuel documentation overview <https://docs.fuel-infra.org/openstack/fuel/fuel-7.0/#guides>`_
+
+8) `Fuel planning guide <https://docs.mirantis.com/openstack/fuel/fuel-7.0/planning-guide.html>`_
+
+9) `Fuel user guide <http://docs.mirantis.com/openstack/fuel/fuel-7.0/user-guide.html>`_
+
+10) `Fuel operations guide <http://docs.mirantis.com/openstack/fuel/fuel-7.0/operations.html>`_
+
+11) `Fuel Plugin Developers Guide <https://wiki.openstack.org/wiki/Fuel/Plugins>`_
+
+12) `Fuel OpenStack Hardware Compatibility List <https://www.mirantis.com/products/openstack-drivers-and-plugins/hardware-compatibility-list>`_
+
+Fuel in OPNFV
+-------------
+
+13) OPNFV Installation instruction for the Brahmaputra release of OPNFV when using Fuel as a deployment tool
+
+14) OPNFV Build instruction for the Brahmaputra release of OPNFV when using Fuel as a deployment tool
+
+15) OPNFV Release Note for the Brahmaputra release of OPNFV when using Fuel as a deployment tool
Code Review / fuel.git / commitdiff