--- /dev/null
+# This template configures each role to use a pair of bonded nics (nic2 and
+# nic3) and configures an IP address on each relevant isolated network
+# for each role, with IPv6 on the External network. This template assumes
+# use of network-isolation-v6.yaml.
+#
+# FIXME: if/when we add functionality to heatclient to include heat
+# environment files we should think about using it here to automatically
+# include network-isolation-v6.yaml.
+resource_registry:
+ OS::TripleO::BlockStorage::Net::SoftwareConfig: ../network/config/bond-with-vlans/cinder-storage.yaml
+ OS::TripleO::Compute::Net::SoftwareConfig: ../network/config/bond-with-vlans/compute.yaml
+ OS::TripleO::Controller::Net::SoftwareConfig: ../network/config/bond-with-vlans/controller-v6.yaml
+ OS::TripleO::ObjectStorage::Net::SoftwareConfig: ../network/config/bond-with-vlans/swift-storage.yaml
+ OS::TripleO::CephStorage::Net::SoftwareConfig: ../network/config/bond-with-vlans/ceph-storage.yaml
+
+parameter_defaults:
+ # This sets 'external_network_bridge' in l3_agent.ini to an empty string
+ # so that external networks act like provider bridge networks (they
+ # will plug into br-int instead of br-ex)
+ NeutronExternalNetworkBridge: "''"
OS::TripleO::ObjectStorage::Net::SoftwareConfig: ../network/config/bond-with-vlans/swift-storage.yaml
OS::TripleO::CephStorage::Net::SoftwareConfig: ../network/config/bond-with-vlans/ceph-storage.yaml
-# We use parameter_defaults instead of parameters here because Tuskar munges
-# the names of top level and role level parameters with the role name and a
-# version. Using parameter_defaults makes it such that if the parameter name is
-# not defined in the template, we don't get an error.
parameter_defaults:
# This sets 'external_network_bridge' in l3_agent.ini to an empty string
# so that external networks act like provider bridge networks (they
--- /dev/null
+# This template configures each role to use a separate NIC for
+# each isolated network with IPv6 on the External network.
+# This template assumes use of network-isolation.yaml.
+#
+# FIXME: if/when we add functionality to heatclient to include heat
+# environment files we should think about using it here to automatically
+# include network-isolation-v6.yaml.
+resource_registry:
+ OS::TripleO::BlockStorage::Net::SoftwareConfig: ../network/config/multiple-nics/cinder-storage.yaml
+ OS::TripleO::Compute::Net::SoftwareConfig: ../network/config/multiple-nics/compute.yaml
+ OS::TripleO::Controller::Net::SoftwareConfig: ../network/config/multiple-nics/controller-v6.yaml
+ OS::TripleO::ObjectStorage::Net::SoftwareConfig: ../network/config/multiple-nics/swift-storage.yaml
+ OS::TripleO::CephStorage::Net::SoftwareConfig: ../network/config/multiple-nics/ceph-storage.yaml
OS::TripleO::ObjectStorage::Net::SoftwareConfig: ../network/config/single-nic-linux-bridge-vlans/swift-storage.yaml
OS::TripleO::CephStorage::Net::SoftwareConfig: ../network/config/single-nic-linux-bridge-vlans/ceph-storage.yaml
-# We use parameter_defaults instead of parameters here because Tuskar munges
-# the names of top level and role level parameters with the role name and a
-# version. Using parameter_defaults makes it such that if the parameter name is
-# not defined in the template, we don't get an error.
parameter_defaults:
# This sets 'external_network_bridge' in l3_agent.ini to an empty string
# so that external networks act like provider bridge networks (they
--- /dev/null
+# This template configures each role to use Vlans on a single nic for
+# each isolated network with IPv6 on the External network.
+# This template assumes use of network-isolation.yaml.
+#
+# FIXME: if/when we add functionality to heatclient to include heat
+# environment files we should think about using it here to automatically
+# include network-isolation-v6.yaml.
+resource_registry:
+ OS::TripleO::BlockStorage::Net::SoftwareConfig: ../network/config/single-nic-vlans/cinder-storage.yaml
+ OS::TripleO::Compute::Net::SoftwareConfig: ../network/config/single-nic-vlans/compute.yaml
+ OS::TripleO::Controller::Net::SoftwareConfig: ../network/config/single-nic-vlans/controller-v6.yaml
+ OS::TripleO::ObjectStorage::Net::SoftwareConfig: ../network/config/single-nic-vlans/swift-storage.yaml
+ OS::TripleO::CephStorage::Net::SoftwareConfig: ../network/config/single-nic-vlans/ceph-storage.yaml
+
+parameter_defaults:
+ # This sets 'external_network_bridge' in l3_agent.ini to an empty string
+ # so that external networks act like provider bridge networks (they
+ # will plug into br-int instead of br-ex)
+ NeutronExternalNetworkBridge: "''"
OS::TripleO::ObjectStorage::Net::SoftwareConfig: ../network/config/single-nic-vlans/swift-storage.yaml
OS::TripleO::CephStorage::Net::SoftwareConfig: ../network/config/single-nic-vlans/ceph-storage.yaml
-# We use parameter_defaults instead of parameters here because Tuskar munges
-# the names of top level and role level parameters with the role name and a
-# version. Using parameter_defaults makes it such that if the parameter name is
-# not defined in the template, we don't get an error.
parameter_defaults:
# This sets 'external_network_bridge' in l3_agent.ini to an empty string
# so that external networks act like provider bridge networks (they
--- /dev/null
+heat_template_version: 2015-04-30
+
+description: >
+ Software Config to drive os-net-config with 2 bonded nics on a bridge
+ with VLANs attached for the controller role with IPv6 on the External
+ network. The IPv6 default route is on the External network, and the
+ IPv4 default route is on the Control Plane.
+
+parameters:
+ ControlPlaneIp:
+ default: ''
+ description: IP address/subnet on the ctlplane network
+ type: string
+ ExternalIpSubnet:
+ default: ''
+ description: IP address/subnet on the external network
+ type: string
+ InternalApiIpSubnet:
+ default: ''
+ description: IP address/subnet on the internal API network
+ type: string
+ StorageIpSubnet:
+ default: ''
+ description: IP address/subnet on the storage network
+ type: string
+ StorageMgmtIpSubnet:
+ default: ''
+ description: IP address/subnet on the storage mgmt network
+ type: string
+ TenantIpSubnet:
+ default: ''
+ description: IP address/subnet on the tenant network
+ type: string
+ ManagementIpSubnet: # Only populated when including environments/network-management.yaml
+ default: ''
+ description: IP address/subnet on the management network
+ type: string
+ BondInterfaceOvsOptions:
+ default: 'bond_mode=active-backup'
+ description: The ovs_options string for the bond interface. Set things like
+ lacp=active and/or bond_mode=balance-slb using this option.
+ type: string
+ ExternalNetworkVlanID:
+ default: 10
+ description: Vlan ID for the external network traffic.
+ type: number
+ InternalApiNetworkVlanID:
+ default: 20
+ description: Vlan ID for the internal_api network traffic.
+ type: number
+ StorageNetworkVlanID:
+ default: 30
+ description: Vlan ID for the storage network traffic.
+ type: number
+ StorageMgmtNetworkVlanID:
+ default: 40
+ description: Vlan ID for the storage mgmt network traffic.
+ type: number
+ TenantNetworkVlanID:
+ default: 50
+ description: Vlan ID for the tenant network traffic.
+ type: number
+ ManagementNetworkVlanID:
+ default: 60
+ description: Vlan ID for the management network traffic.
+ type: number
+ ExternalInterfaceDefaultRoute:
+ default: '10.0.0.1'
+ description: default route for the external network
+ type: string
+ ControlPlaneSubnetCidr: # Override this via parameter_defaults
+ default: '24'
+ description: The subnet CIDR of the control plane network.
+ type: string
+ ControlPlaneDefaultRoute: # Override this via parameter_defaults
+ description: The default route of the control plane network.
+ type: string
+ DnsServers: # Override this via parameter_defaults
+ default: []
+ description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf.
+ type: comma_delimited_list
+ EC2MetadataIp: # Override this via parameter_defaults
+ description: The IP address of the EC2 metadata server.
+ type: string
+
+resources:
+ OsNetConfigImpl:
+ type: OS::Heat::StructuredConfig
+ properties:
+ group: os-apply-config
+ config:
+ os_net_config:
+ network_config:
+ -
+ type: interface
+ name: nic1
+ use_dhcp: false
+ addresses:
+ -
+ ip_netmask:
+ list_join:
+ - '/'
+ - - {get_param: ControlPlaneIp}
+ - {get_param: ControlPlaneSubnetCidr}
+ routes:
+ -
+ ip_netmask: 169.254.169.254/32
+ next_hop: {get_param: EC2MetadataIp}
+ -
+ default: true
+ next_hop: {get_param: ControlPlaneDefaultRoute}
+ -
+ type: ovs_bridge
+ name: {get_input: bridge_name}
+ dns_servers: {get_param: DnsServers}
+ members:
+ -
+ type: ovs_bond
+ name: bond1
+ ovs_options: {get_param: BondInterfaceOvsOptions}
+ members:
+ -
+ type: interface
+ name: nic2
+ primary: true
+ -
+ type: interface
+ name: nic3
+ -
+ type: vlan
+ device: bond1
+ vlan_id: {get_param: ExternalNetworkVlanID}
+ addresses:
+ -
+ ip_netmask: {get_param: ExternalIpSubnet}
+ routes:
+ -
+ default: true
+ next_hop: {get_param: ExternalInterfaceDefaultRoute}
+ -
+ type: vlan
+ device: bond1
+ vlan_id: {get_param: InternalApiNetworkVlanID}
+ addresses:
+ -
+ ip_netmask: {get_param: InternalApiIpSubnet}
+ -
+ type: vlan
+ device: bond1
+ vlan_id: {get_param: StorageNetworkVlanID}
+ addresses:
+ -
+ ip_netmask: {get_param: StorageIpSubnet}
+ -
+ type: vlan
+ device: bond1
+ vlan_id: {get_param: StorageMgmtNetworkVlanID}
+ addresses:
+ -
+ ip_netmask: {get_param: StorageMgmtIpSubnet}
+ -
+ type: vlan
+ device: bond1
+ vlan_id: {get_param: TenantNetworkVlanID}
+ addresses:
+ -
+ ip_netmask: {get_param: TenantIpSubnet}
+ # Uncomment when including environments/network-management.yaml
+ #-
+ # type: vlan
+ # device: bond1
+ # vlan_id: {get_param: ManagementNetworkVlanID}
+ # addresses:
+ # -
+ # ip_netmask: {get_param: ManagementIpSubnet}
+
+outputs:
+ OS::stack_id:
+ description: The OsNetConfigImpl resource.
+ value: {get_resource: OsNetConfigImpl}
--- /dev/null
+heat_template_version: 2015-04-30
+
+description: >
+ Software Config to drive os-net-config to configure multiple interfaces
+ for the controller role with IPv6 on the External network. The IPv6
+ default route is on the External network, and the IPv4 default route
+ is on the Control Plane.
+
+parameters:
+ ControlPlaneIp:
+ default: ''
+ description: IP address/subnet on the ctlplane network
+ type: string
+ ExternalIpSubnet:
+ default: ''
+ description: IP address/subnet on the external network
+ type: string
+ InternalApiIpSubnet:
+ default: ''
+ description: IP address/subnet on the internal API network
+ type: string
+ StorageIpSubnet:
+ default: ''
+ description: IP address/subnet on the storage network
+ type: string
+ StorageMgmtIpSubnet:
+ default: ''
+ description: IP address/subnet on the storage mgmt network
+ type: string
+ TenantIpSubnet:
+ default: ''
+ description: IP address/subnet on the tenant network
+ type: string
+ ManagementIpSubnet: # Only populated when including environments/network-management.yaml
+ default: ''
+ description: IP address/subnet on the management network
+ type: string
+ ExternalNetworkVlanID:
+ default: 10
+ description: Vlan ID for the external network traffic.
+ type: number
+ InternalApiNetworkVlanID:
+ default: 20
+ description: Vlan ID for the internal_api network traffic.
+ type: number
+ StorageNetworkVlanID:
+ default: 30
+ description: Vlan ID for the storage network traffic.
+ type: number
+ StorageMgmtNetworkVlanID:
+ default: 40
+ description: Vlan ID for the storage mgmt network traffic.
+ type: number
+ TenantNetworkVlanID:
+ default: 50
+ description: Vlan ID for the tenant network traffic.
+ type: number
+ ManagementNetworkVlanID:
+ default: 60
+ description: Vlan ID for the management network traffic.
+ type: number
+ ExternalInterfaceDefaultRoute:
+ default: '10.0.0.1'
+ description: default route for the external network
+ type: string
+ ControlPlaneSubnetCidr: # Override this via parameter_defaults
+ default: '24'
+ description: The subnet CIDR of the control plane network.
+ type: string
+ ControlPlaneDefaultRoute: # Override this via parameter_defaults
+ description: The default route of the control plane network.
+ type: string
+ DnsServers: # Override this via parameter_defaults
+ default: []
+ description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf.
+ type: comma_delimited_list
+ EC2MetadataIp: # Override this via parameter_defaults
+ description: The IP address of the EC2 metadata server.
+ type: string
+
+resources:
+ OsNetConfigImpl:
+ type: OS::Heat::StructuredConfig
+ properties:
+ group: os-apply-config
+ config:
+ os_net_config:
+ network_config:
+ -
+ type: interface
+ name: nic1
+ use_dhcp: false
+ dns_servers: {get_param: DnsServers}
+ addresses:
+ -
+ ip_netmask:
+ list_join:
+ - '/'
+ - - {get_param: ControlPlaneIp}
+ - {get_param: ControlPlaneSubnetCidr}
+ routes:
+ -
+ ip_netmask: 169.254.169.254/32
+ next_hop: {get_param: EC2MetadataIp}
+ -
+ default: true
+ next_hop: {get_param: ControlPlaneDefaultRoute}
+ -
+ type: interface
+ name: nic2
+ use_dhcp: false
+ addresses:
+ -
+ ip_netmask: {get_param: StorageIpSubnet}
+ -
+ type: interface
+ name: nic3
+ use_dhcp: false
+ addresses:
+ -
+ ip_netmask: {get_param: StorageMgmtIpSubnet}
+ -
+ type: interface
+ name: nic4
+ use_dhcp: false
+ addresses:
+ -
+ ip_netmask: {get_param: InternalApiIpSubnet}
+ -
+ # Create a bridge which can also be used for VLAN-mode bridge mapping
+ type: ovs_bridge
+ name: br-tenant
+ use_dhcp: false
+ addresses:
+ -
+ ip_netmask: {get_param: TenantIpSubnet}
+ members:
+ -
+ type: interface
+ name: nic5
+ use_dhcp: false
+ # force the MAC address of the bridge to this interface
+ primary: true
+ -
+ type: ovs_bridge
+ name: {get_input: bridge_name}
+ dns_servers: {get_param: DnsServers}
+ use_dhcp: false
+ addresses:
+ -
+ ip_netmask: {get_param: ExternalIpSubnet}
+ routes:
+ -
+ default: true
+ next_hop: {get_param: ExternalInterfaceDefaultRoute}
+ members:
+ -
+ type: interface
+ name: nic6
+ # force the MAC address of the bridge to this interface
+ primary: true
+ # Uncomment when including environments/network-management.yaml
+ #-
+ # type: interface
+ # name: nic7
+ # use_dhcp: false
+ # addresses:
+ # -
+ # ip_netmask: {get_param: ManagementIpSubnet}
+
+outputs:
+ OS::stack_id:
+ description: The OsNetConfigImpl resource.
+ value: {get_resource: OsNetConfigImpl}
--- /dev/null
+heat_template_version: 2015-04-30
+
+description: >
+ Software Config to drive os-net-config to configure VLANs for the
+ controller role with IPv6 on the External network. The IPv6 default
+ route is on the External network, and the IPv4 default route is on
+ the Control Plane.
+
+parameters:
+ ControlPlaneIp:
+ default: ''
+ description: IP address/subnet on the ctlplane network
+ type: string
+ ExternalIpSubnet:
+ default: ''
+ description: IP address/subnet on the external network
+ type: string
+ InternalApiIpSubnet:
+ default: ''
+ description: IP address/subnet on the internal API network
+ type: string
+ StorageIpSubnet:
+ default: ''
+ description: IP address/subnet on the storage network
+ type: string
+ StorageMgmtIpSubnet:
+ default: ''
+ description: IP address/subnet on the storage mgmt network
+ type: string
+ TenantIpSubnet:
+ default: ''
+ description: IP address/subnet on the tenant network
+ type: string
+ ManagementIpSubnet: # Only populated when including environments/network-management.yaml
+ default: ''
+ description: IP address/subnet on the management network
+ type: string
+ ExternalNetworkVlanID:
+ default: 10
+ description: Vlan ID for the external network traffic.
+ type: number
+ InternalApiNetworkVlanID:
+ default: 20
+ description: Vlan ID for the internal_api network traffic.
+ type: number
+ StorageNetworkVlanID:
+ default: 30
+ description: Vlan ID for the storage network traffic.
+ type: number
+ StorageMgmtNetworkVlanID:
+ default: 40
+ description: Vlan ID for the storage mgmt network traffic.
+ type: number
+ TenantNetworkVlanID:
+ default: 50
+ description: Vlan ID for the tenant network traffic.
+ type: number
+ ManagementNetworkVlanID:
+ default: 60
+ description: Vlan ID for the management network traffic.
+ type: number
+ ExternalInterfaceDefaultRoute:
+ default: '10.0.0.1'
+ description: default route for the external network
+ type: string
+ ControlPlaneSubnetCidr: # Override this via parameter_defaults
+ default: '24'
+ description: The subnet CIDR of the control plane network.
+ type: string
+ ControlPlaneDefaultRoute: # Override this via parameter_defaults
+ description: The default route of the control plane network.
+ type: string
+ DnsServers: # Override this via parameter_defaults
+ default: []
+ description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf.
+ type: comma_delimited_list
+ EC2MetadataIp: # Override this via parameter_defaults
+ description: The IP address of the EC2 metadata server.
+ type: string
+
+resources:
+ OsNetConfigImpl:
+ type: OS::Heat::StructuredConfig
+ properties:
+ group: os-apply-config
+ config:
+ os_net_config:
+ network_config:
+ -
+ type: ovs_bridge
+ name: {get_input: bridge_name}
+ use_dhcp: false
+ dns_servers: {get_param: DnsServers}
+ addresses:
+ -
+ ip_netmask:
+ list_join:
+ - '/'
+ - - {get_param: ControlPlaneIp}
+ - {get_param: ControlPlaneSubnetCidr}
+ routes:
+ -
+ ip_netmask: 169.254.169.254/32
+ next_hop: {get_param: EC2MetadataIp}
+ -
+ default: true
+ next_hop: {get_param: ControlPlaneDefaultRoute}
+ members:
+ -
+ type: interface
+ name: nic1
+ # force the MAC address of the bridge to this interface
+ primary: true
+ -
+ type: vlan
+ vlan_id: {get_param: ExternalNetworkVlanID}
+ addresses:
+ -
+ ip_netmask: {get_param: ExternalIpSubnet}
+ routes:
+ -
+ default: true
+ next_hop: {get_param: ExternalInterfaceDefaultRoute}
+ -
+ type: vlan
+ vlan_id: {get_param: InternalApiNetworkVlanID}
+ addresses:
+ -
+ ip_netmask: {get_param: InternalApiIpSubnet}
+ -
+ type: vlan
+ vlan_id: {get_param: StorageNetworkVlanID}
+ addresses:
+ -
+ ip_netmask: {get_param: StorageIpSubnet}
+ -
+ type: vlan
+ vlan_id: {get_param: StorageMgmtNetworkVlanID}
+ addresses:
+ -
+ ip_netmask: {get_param: StorageMgmtIpSubnet}
+ -
+ type: vlan
+ vlan_id: {get_param: TenantNetworkVlanID}
+ addresses:
+ -
+ ip_netmask: {get_param: TenantIpSubnet}
+ #- # Uncomment when including environments/network-management.yaml
+ # type: vlan
+ # vlan_id: {get_param: ManagementNetworkVlanID}
+ # addresses:
+ # -
+ # ip_netmask: {get_param: ManagementIpSubnet}
+
+outputs:
+ OS::stack_id:
+ description: The OsNetConfigImpl resource.
+ value: {get_resource: OsNetConfigImpl}
ip_netmask: {get_param: ExternalIpSubnet}
routes:
-
- ip_netmask: 0.0.0.0/0
+ default: true
next_hop: {get_param: ExternalInterfaceDefaultRoute}
-
type: vlan
Code Review / apex-tripleo-heat-templates.git / commitdiff