Update docs for Colorado 3.0 release

Change-Id: I93156463e63d71e8b32446b3dfbfe61a7929bf38
Signed-off-by: cristinapauna <cristina.pauna@enea.com>

diff --git a/docs/buildprocedure/build.instruction.rst b/docs/buildprocedure/build.instruction.rst
index f6ad889..405a0e7 100644 (file)
--- a/docs/buildprocedure/build.instruction.rst
+++ b/docs/buildprocedure/build.instruction.rst
@@ -70,14 +70,12 @@ On the host, the following packages must be installed:
 
 - curl
 
-- fuseiso
-
 Apart from docker, all other package requirements listed above are
 simply available through:
 
 .. code-block:: bash
 
-    $ sudo apt-get install git make curl fuseiso
+    $ sudo apt-get install git make curl
 
 
 ============
@@ -139,7 +137,7 @@ Check out the Colorado release:
 .. code-block:: bash
 
     $ cd armband
-    $ git checkout colorado.3.0
+    $ git checkout colorado.3.0.1
 
 Clone the armband@OPNFV code Git repository without a SSH key
 -------------------------------------------------------------
@@ -261,7 +259,7 @@ that this is not a full build.
 This method of plugin selection is not meant to be used from within
 Gerrit!
 
-Note! So far, only ODL, OVS and BGPVPN plugins were ported to AArch64.
+Note! So far, only ODL, OVS, BGPVPN and Tacker plugins were ported to AArch64.
 
 ========
 Building

diff --git a/docs/installationprocedure/installation.instruction.rst b/docs/installationprocedure/installation.instruction.rst
index a0a486b..ec55d3e 100644 (file)
--- a/docs/installationprocedure/installation.instruction.rst
+++ b/docs/installationprocedure/installation.instruction.rst
@@ -36,7 +36,7 @@ networking and Unix/Linux administration.
 Preface
 =======
 
-Before starting the installation of the AArch64 Colorado 1.0 release
+Before starting the installation of the AArch64 Colorado release
 of OPNFV, using Fuel as a deployment tool, some planning must be
 done.
 
@@ -52,7 +52,7 @@ Building the ISO image
 
 Alternatively, you may build the Armband Fuel .iso from source by cloning
 the opnfv/armband git repository. To retrieve the repository for the AArch64
-Colorado 1.0 release use the following command:
+Colorado release use the following command:
 
 .. code-block:: bash
 
@@ -63,7 +63,7 @@ baseline required to replicate the Colorado release:
 
 .. code-block:: bash
 
-    $ git checkout colorado.3.0
+    $ git checkout colorado.3.0.1
 
 Go to the armband directory and build the .iso:
 
@@ -113,7 +113,7 @@ Hardware requirements
 =====================
 
 The following minimum hardware requirements must be met for the
-installation of AArch64 Colorado 1.0 using Fuel:
+installation of AArch64 Colorado using Fuel:
 
 +--------------------+------------------------------------------------------+
 | **HW Aspect**      | **Requirement**                                      |
@@ -230,12 +230,8 @@ Install Fuel master
 
 #. In the "Network Setup" section - Configure DHCP/Static IP information for your FUEL node - For example, ETH0 is 10.20.0.2/24 for FUEL booting and ETH1 is DHCP in your corporate/lab network (see figure below).
 
-- **NOTE**: ArmbandFuel@OPNFV requires internet connectivity during bootstrap
-     image building, due to missing arm64 (AArch64) packages in the partial
-     local Ubuntu mirror (consequence of ports.ubuntu.com mirror architecture).
-
-   - Configuration of ETH1 interface for connectivity into your corporate/lab
-     network is mandatory, as internet connection is required during deployment.
+- **NOTE**: Configuration of ETH1 interface for connectivity into your corporate/lab
+     network is optional
 
    .. figure:: img/fuelmenu2.png
 
@@ -344,8 +340,8 @@ Install additional Plugins/Features on the FUEL node
 
    .. figure:: img/plugin_install.png
 
-   **NOTE**: AArch64 Colorado 1.0 ships only with ODL, OVS and BGPVPN plugins,
-   see *Reference 15*.
+   **NOTE**: AArch64 Colorado 1.0 ships only with ODL, OVS, BGPVPN and Tacker
+   plugins, see *Reference 15*.
 
 Create an OpenStack Environment
 ===============================
@@ -551,10 +547,7 @@ Allocate nodes to environment and assign functional roles
     .. figure:: img/interfaceconf.png
 
 OPTIONAL - Set Local Mirror Repos
-===========================================
-
-**NOTE**: Below instruction assume you already added (by hand) arm64
-Ubuntu necessary packages to the local repository!
+=================================
 
 The following steps must be executed if you are in an environment with
 no connection to the Internet. The Fuel server delivers a local repo
@@ -581,7 +574,7 @@ Target specific configuration
    currently only affects AArch64 targets (see *Reference 15*).
 
    When using some AArch64 platforms as controller nodes, WSREP SST
-   synchronisation using default backend provider (xtrabackup-v2) might fail,
+   synchronisation using default backend provider (xtrabackup-v2) used to fail,
    so a mechanism that allows selecting a different WSREP SST provider
    has been introduced.
 

diff --git a/docs/releasenotes/release-notes.rst b/docs/releasenotes/release-notes.rst
index 6f8ea4f..b4e8bc8 100644 (file)
--- a/docs/releasenotes/release-notes.rst
+++ b/docs/releasenotes/release-notes.rst
@@ -44,6 +44,8 @@ supplemented with OPNFV unique components such as:
 
 - `BGPVPN <http://docs.openstack.org/developer/networking-bgpvpn>`_ 'http://docs.openstack.org/developer/networking-bgpvpn/'
 
+-  Tacker <https://wiki.openstack.org/wiki/Tacker>`_ 'https://wiki.openstack.org/wiki/Tacker'
+
 The following OPNFV plugins are not yet ported for AArch64:
 
 - `ONOS <http://onosproject.org/>`_ version "Drake" - 'http://onosproject.org/'
@@ -108,7 +110,7 @@ Version change
 
 Module version changes
 ----------------------
-This is the Colorado 3.0 release.
+This is the Colorado 3.0 follow-up release.
 It is based on following upstream versions:
 
 - Fuel 9.0 Base release