Add test case description and task file for TC053

JIRA: YARDSTICK-301

Change-Id: I7369ef520bb33381e08168c81eeb997ebaafd0f5
Signed-off-by: tjuyinkanglin <14_ykl@tongji.edu.cn>

diff --git a/docs/userguide/opnfv_yardstick_tc053.rst b/docs/userguide/opnfv_yardstick_tc053.rst
new file mode 100644 (file)
index 0000000..8808d12
--- /dev/null
+++ b/docs/userguide/opnfv_yardstick_tc053.rst
@@ -0,0 +1,142 @@
+.. This work is licensed under a Creative Commons Attribution 4.0 International
+.. License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) OPNFV, Yin Kanglin and others.
+.. 14_ykl@tongji.edu.cn
+
+*************************************
+Yardstick Test Case Description TC053
+*************************************
+
++-----------------------------------------------------------------------------+
+|OpenStack Controller Load Balance Service High Availability                  |
+|                                                                             |
++--------------+--------------------------------------------------------------+
+|test case id  | OPNFV_YARDSTICK_TC053: OpenStack Controller Load Balance     |
+|              | Service High Availability-                                   |
++--------------+--------------------------------------------------------------+
+|test purpose  | This test case will verify the high availability of the      |
+|              | load balance service(current is HAProxy) that supports       |
+|              | OpenStack on controller node. When the load balance service  |
+|              | of a specified controller node is killed, whether other load |
+|              | balancers on other controller nodes will work, and whether   |
+|              | the controller node will restart the load balancer are       |
+|              | checked.                                                     |
++--------------+--------------------------------------------------------------+
+|test method   | This test case kills the processes of load balance service   |
+|              | on a selected control node, then checks whether the request  |
+|              | of the related Openstack command is OK and the killed        |
+|              | processes are recovered.                                     |
++--------------+--------------------------------------------------------------+
+|attackers     | In this test case, an attacker called "kill-process" is      |
+|              | needed. This attacker includes three parameters:             |
+|              | 1) fault_type: which is used for finding the attacker's      |
+|              | scripts. It should be always set to "kill-process" in this   |
+|              | test case.                                                   |
+|              | 2) process_name: which is the process name of the specified  |
+|              | OpenStack service. If there are multiple processes use the   |
+|              | same name on the host, all of them are killed by this        |
+|              | attacker.                                                    |
+|              | In this case. This parameter should always set to "swift-    |
+|              | proxy".                                                      |
+|              | 3) host: which is the name of a control node being attacked. |
+|              |                                                              |
+|              | e.g.                                                         |
+|              | -fault_type: "kill-process"                                  |
+|              | -process_name: "haproxy"                                     |
+|              | -host: node1                                                 |
+|              |                                                              |
++--------------+--------------------------------------------------------------+
+|monitors      | In this test case, two kinds of monitor are needed:          |
+|              | 1. the "openstack-cmd" monitor constantly request a specific |
+|              | Openstack command, which needs two parameters:               |
+|              | 1) monitor_type: which is used for finding the monitor class |
+|              | and related scritps. It should be always set to              |
+|              | "openstack-cmd" for this monitor.                            |
+|              | 2) command_name: which is the command name used for request. |
+|              |                                                              |
+|              | 2. the "process" monitor check whether a process is running  |
+|              | on a specific node, which needs three parameters:            |
+|              | 1) monitor_type: which used for finding the monitor class    |
+|              | and related scripts. It should be always set to "process"    |
+|              | for this monitor.                                            |
+|              | 2) process_name: which is the process name for monitor       |
+|              | 3) host: which is the name of the node runing the process    |
+|              | In this case, the command_name of monitor1 should be         |
+|              | services that is supported by load balancer and the process- |
+|              | name of monitor2 should be "haproxy", for example:           |
+|              |                                                              |
+|              | e.g.                                                         |
+|              | monitor1:                                                    |
+|              | -monitor_type: "openstack-cmd"                               |
+|              | -command_name: "nova image-list"                             |
+|              | monitor2:                                                    |
+|              | -monitor_type: "process"                                     |
+|              | -process_name: "haproxy"                                     |
+|              | -host: node1                                                 |
+|              |                                                              |
++--------------+--------------------------------------------------------------+
+|metrics       | In this test case, there are two metrics:                    |
+|              | 1)service_outage_time: which indicates the maximum outage    |
+|              | time (seconds) of the specified Openstack command request.   |
+|              | 2)process_recover_time: which indicates the maximun time     |
+|              | (seconds) from the process being killed to recovered         |
+|              |                                                              |
++--------------+--------------------------------------------------------------+
+|test tool     | Developed by the project. Please see folder:                 |
+|              | "yardstick/benchmark/scenarios/availability/ha_tools"        |
+|              |                                                              |
++--------------+--------------------------------------------------------------+
+|references    | ETSI NFV REL001                                              |
+|              |                                                              |
++--------------+--------------------------------------------------------------+
+|configuration | This test case needs two configuration files:                |
+|              | 1) test case file: opnfv_yardstick_tc053.yaml                |
+|              | -Attackers: see above "attackers" discription                |
+|              | -waiting_time: which is the time (seconds) from the process  |
+|              | being killed to stoping monitors the monitors                |
+|              | -Monitors: see above "monitors" discription                  |
+|              | -SLA: see above "metrics" discription                        |
+|              |                                                              |
+|              | 2)POD file: pod.yaml                                         |
+|              | The POD configuration should record on pod.yaml first.       |
+|              | the "host" item in this test case will use the node name in  |
+|              | the pod.yaml.                                                |
+|              |                                                              |
++--------------+--------------------------------------------------------------+
+|test sequence | description and expected result                              |
+|              |                                                              |
++--------------+--------------------------------------------------------------+
+|step 1        | start monitors:                                              |
+|              | each monitor will run with independently process             |
+|              |                                                              |
+|              | Result: The monitor info will be collected.                  |
+|              |                                                              |
++--------------+--------------------------------------------------------------+
+|step 2        | do attacker: connect the host through SSH, and then execute  |
+|              | the kill process script with param value specified by        |
+|              | "process_name"                                               |
+|              |                                                              |
+|              | Result: Process will be killed.                              |
+|              |                                                              |
++--------------+--------------------------------------------------------------+
+|step 3        | stop monitors after a period of time specified by            |
+|              | "waiting_time"                                               |
+|              |                                                              |
+|              | Result: The monitor info will be aggregated.                 |
+|              |                                                              |
++--------------+--------------------------------------------------------------+
+|step 4        | verify the SLA                                               |
+|              |                                                              |
+|              | Result: The test case is passed or not.                      |
+|              |                                                              |
++--------------+--------------------------------------------------------------+
+|post-action   | It is the action when the test cases exist. It will check    |
+|              | the status of the specified process on the host, and restart |
+|              | the process if it is not running for next test cases.        |
+|              |                                                              |
++--------------+--------------------------------------------------------------+
+|test verdict  | Fails only if SLA is not passed, or if there is a test case  |
+|              | execution problem.                                           |
+|              |                                                              |
++--------------+--------------------------------------------------------------+

diff --git a/tests/opnfv/test_cases/opnfv_yardstick_tc053.yaml b/tests/opnfv/test_cases/opnfv_yardstick_tc053.yaml
new file mode 100644 (file)
index 0000000..696ed3b
--- /dev/null
+++ b/tests/opnfv/test_cases/opnfv_yardstick_tc053.yaml
@@ -0,0 +1,61 @@
+---
+# Test case for TC053 :Openstack Controller Load Balance Service High Availability
+# This test case is written by new scenario-based HA testing framework
+
+schema: "yardstick:task:0.1"
+scenarios:
+  -
+    type: "GeneralHA"
+    options:
+      attackers:
+        -
+          fault_type: "kill-process"
+          host: node1
+          key: "kill-process"
+          process_name: "haproxy"
+
+      monitors:
+        -
+          monitor_type: "process"
+          key: "service-status"
+          process_name: "haproxy"
+          host: node1
+          monitor_time: 20
+          sla:
+            max_recover_time: 30
+
+        -
+          monitor_type: "openstack-cmd"
+          key: "list-images"
+          command_name: "nova image-list"
+          monitor_time: 10
+          sla:
+            max_outage_time: 5
+
+      steps:
+        -
+          actionKey: "kill-process"
+          actionType: "attacker"
+          index: 1
+        -
+          actionKey: "service-status"
+          actionType: "monitor"
+          index: 2
+        -
+          actionKey: "list-images"
+          actionType: "monitor"
+          index: 3
+
+    nodes:
+      node1: node1.LF
+    runner:
+      type: Duration
+      duration: 1
+    sla:
+      outage_time: 5
+      action: monitor
+
+context:
+  type: Node
+  name: LF
+  file: etc/yardstick/nodes/fuel_virtual/pod.yaml