# Functions for MAAS network customization
#
-#Below function will mark the interfaces in Auto mode to enbled by MAAS
-enableautomode() {
- API_KEY=`sudo maas-region apikey --username=ubuntu`
- maas login $PROFILE $API_SERVERMAAS $API_KEY
- vlanid=$(maas $PROFILE subnet read $3 | jq -r '.vlan.id')
-
- for node in $(maas $PROFILE nodes read | jq -r '.[].system_id')
- do
- maas $PROFILE interface update $node $1 vlan=$vlanid
- maas $PROFILE interface link-subnet $node $1 mode=$2 subnet=$3 || true
- done
-}
-
#Below function will mark the interfaces in Auto mode to enbled by MAAS
# using hostname of the node added into MAAS
enableautomodebyname() {
#
# Enable MAAS nodes interfaces
#
+API_KEY=`sudo maas-region apikey --username=ubuntu`
+maas login $PROFILE $API_SERVERMAAS $API_KEY
-#read interface needed in Auto mode and enable it. Will be rmeoved once auto enablement will be implemented in the maas-deployer.
-# Enable only non vlan interfaces first.
if [ -e ./labconfig.json ]; then
- if [ $SUBNETDATA_CIDR ]; then
- EXTNET=`cat labconfig.json | jq --raw-output '.lab.racks[0].nodes[].nics[] | select(.spaces[]=="data")'.ifname | sort -u`
- i="0"
- while [ ! -z "${EXTNET[i]}" ];
- do
- if ([ -z $VLAN ] || [ "$VLAN" == "null" ]); then
- enableautomode ${EXTNET[i]} AUTO $SUBNETDATA_CIDR || true
- fi
- i=$[$i+1]
- done
- fi
- if [ $SUBNETPUB_CIDR ]; then
- EXTNET=`cat labconfig.json | jq --raw-output '.lab.racks[0].nodes[].nics[] | select(.spaces[]=="public")'.ifname | sort -u`
- i="0"
- while [ ! -z "${EXTNET[i]}" ];
- do
- if ([ -z $VLAN ] || [ "$VLAN" == "null" ]); then
- enableautomode ${EXTNET[i]} AUTO $SUBNETPUB_CIDR || true
- fi
- i=$[$i+1]
- done
- fi
- if [ $SUBNETSTOR_CIDR ]; then
- EXTNET=`cat labconfig.json | jq --raw-output '.lab.racks[0].nodes[].nics[] | select(.spaces[]=="storage")'.ifname | sort -u`
- i="0"
- while [ ! -z "${EXTNET[i]}" ];
- do
- if ([ -z $VLAN ] || [ "$VLAN" == "null" ]); then
- enableautomode ${EXTNET[i]} AUTO $SUBNETSTOR_CIDR || true
- fi
- i=$[$i+1]
- done
- fi
- if [ $SUBNETFLOAT_CIDR ]; then
- EXTNET=`cat labconfig.json | jq --raw-output '.lab.racks[0].nodes[].nics[] | select(.spaces[]=="floating")'.ifname | sort -u`
- i="0"
- while [ ! -z "${EXTNET[i]}" ];
- do
- if ([ -z $VLAN ] || [ "$VLAN" == "null" ]); then
- enableautomode ${EXTNET[i]} link_up $SUBNETFLOAT_CIDR || true
- fi
- i=$[$i+1]
- done
- fi
-fi
-
-#enable only the vlan interfaces which were ignore in previous run.
+ # We will configure all node, so we need the qty, and loop on it
+ NODE_QTY=$(cat labconfig.json | jq --raw-output '.lab.racks[0].nodes[]'.name | wc -l)
+ NODE_QTY=$((NODE_QTY-1))
+ for NODE_ID in $(seq 0 $NODE_QTY); do
+ # Get the NAME/SYS_ID of this node
+ NODE_NAME=$(cat labconfig.json | jq --raw-output ".lab.racks[0].nodes[$NODE_ID].name")
+ NODE_SYS_ID=$(maas $PROFILE nodes read | jq -r ".[] | select(.hostname==\"$NODE_NAME\")".system_id)
+ echo ">>> Configuring node $NODE_NAME [$NODE_ID][$NODE_SYS_ID]"
+ # Recover the network interfaces list and configure each one
+ # with sorting the list, we have hardware interface first the vlan interfaces
+ IF_LIST=$(cat labconfig.json | jq --raw-output ".lab.racks[0].nodes[$NODE_ID].nics[] ".ifname | sort -u)
+ for IF_NAME in $IF_LIST; do
+ IF_SPACE=$(cat labconfig.json | jq --raw-output ".lab.racks[0].nodes[$NODE_ID].nics[] | select(.ifname==\"$IF_NAME\") ".spaces[])
+ case "$IF_SPACE" in
+ 'data') SUBNET_CIDR=$SUBNETDATA_CIDR; IF_MODE='AUTO' ;;
+ 'public') SUBNET_CIDR=$SUBNETPUB_CIDR; IF_MODE='AUTO' ;;
+ 'storage') SUBNET_CIDR=$SUBNETSTOR_CIDR; IF_MODE='AUTO' ;;
+ 'floating') SUBNET_CIDR=$SUBNETFLOAT_CIDR; IF_MODE='link_up' ;;
+ *) SUBNET_CIDR='null'; IF_MODE='null'; echo " >>> Unknown SPACE" ;;
+ esac
+ echo " >>> Configuring interface $IF_NAME [$IF_SPACE][$SUBNET_CIDR]"
+
+ # if we have a vlan parameter in the space config
+ IF_VLAN=$(cat labconfig.json | jq --raw-output ".opnfv.spaces[] | select(.type==\"$IF_SPACE\")".vlan)
+ if ([ -z $IF_VLAN ] && [ $IF_NAME =~ \. ]); then
+ # We have no vlan specified on spaces, but we have a vlan subinterface
+ IF_VLAN = ${IF_NAME##*.}; fi
+
+ # In case of a VLAN interface
+ if ([ $IF_VLAN ] && [ "$IF_VLAN" != "null" ]); then
+ echo " >>> Configuring VLAN $IF_VLAN"
+ VLANID=$(maas $PROFILE subnets read | jq ".[].vlan | select(.vid==$IF_VLAN)".id)
+ FABRICID=$(maas $PROFILE subnets read | jq ".[].vlan | select(.vid==$IF_VLAN)".fabric_id)
+ INTERFACE=$(maas $PROFILE interfaces read $NODE_SYS_ID | jq ".[] | select(.vlan.fabric_id==$FABRICID)".id)
+ if [[ -z $INTERFACE ]]; then
+ # parent interface is not set because it does not have a SUBNET_CIDR
+ PARENT_VLANID=$(maas $PROFILE fabrics read | jq ".[].vlans[] | select(.fabric_id==$FABRICID and .name==\"untagged\")".id)
+ # We set the physical interface to the targeted fabric
+ PARENT_IF_NAME=${IF_NAME%%.*}
+ maas $PROFILE interface update $NODE_SYS_ID $PARENT_IF_NAME vlan=$PARENT_VLANID
+ sleep 3
+ INTERFACE=$(maas $PROFILE interfaces read $NODE_SYS_ID | jq ".[] | select(.vlan.fabric_id==$FABRICID)".id)
+ fi
+ maas $PROFILE interfaces create-vlan $NODE_SYS_ID vlan=$VLANID parent=$INTERFACE || true
+ fi
-if [ -e ./labconfig.json ]; then
- if [ $SUBNETDATA_CIDR ]; then
- EXTNET=`cat labconfig.json | jq --raw-output '.lab.racks[0].nodes[].nics[] | select(.spaces[]=="data")'.ifname | sort -u`
- VLAN=`cat labconfig.json | jq --raw-output '.opnfv.spaces[] | select(.type=="data")'.vlan`
- i="0"
- while [ ! -z "${EXTNET[i]}" ];
- do
- if ([ $VLAN ] && [ "$VLAN" != "null" ]); then
- crnodevlanint $VLAN || true
- enableautomode ${EXTNET[i]} AUTO $SUBNETDATA_CIDR || true
- fi
- i=$[$i+1]
- done
- fi
- if [ $SUBNETPUB_CIDR ]; then
- EXTNET=`cat labconfig.json | jq --raw-output '.lab.racks[0].nodes[].nics[] | select(.spaces[]=="public")'.ifname | sort -u`
- VLAN=`cat labconfig.json | jq --raw-output '.opnfv.spaces[] | select(.type=="public")'.vlan`
- i="0"
- while [ ! -z "${EXTNET[i]}" ];
- do
- if ([ $VLAN ] && [ "$VLAN" != "null" ]); then
- crnodevlanint $VLAN || true
- enableautomode ${EXTNET[i]} AUTO $SUBNETPUB_CIDR || true
- fi
- i=$[$i+1]
- done
- fi
- if [ $SUBNETSTOR_CIDR ]; then
- EXTNET=`cat labconfig.json | jq --raw-output '.lab.racks[0].nodes[].nics[] | select(.spaces[]=="storage")'.ifname | sort -u`
- VLAN=`cat labconfig.json | jq --raw-output '.opnfv.spaces[] | select(.type=="storage")'.vlan`
- i="0"
- while [ ! -z "${EXTNET[i]}" ];
- do
- if ([ $VLAN ] && [ "$VLAN" != "null" ]); then
- crnodevlanint $VLAN || true
- enableautomode ${EXTNET[i]} AUTO $SUBNETSTOR_CIDR || true
- fi
- i=$[$i+1]
- done
- fi
- if [ $SUBNETFLOAT_CIDR ]; then
- EXTNET=`cat labconfig.json | jq --raw-output '.lab.racks[0].nodes[].nics[] | select(.spaces[]=="floating")'.ifname | sort -u`
- VLAN=`cat labconfig.json | jq --raw-output '.opnfv.spaces[] | select(.type=="floating")'.vlan`
- i="0"
- while [ ! -z "${EXTNET[i]}" ];
- do
- if ([ $VLAN ] && [ "$VLAN" != "null" ]); then
- crnodevlanint $VLAN || true
- enableautomode ${EXTNET[i]} link_up $SUBNETFLOAT_CIDR || true
- fi
- i=$[$i+1]
- done
- fi
+ # Configure the interface
+ if ([ $SUBNET_CIDR ] && [ "$SUBNET_CIDR" != "null" ]); then
+ VLANID=$(maas $PROFILE subnet read $SUBNET_CIDR | jq -r '.vlan.id')
+ maas $PROFILE interface update $NODE_SYS_ID $IF_NAME vlan=$VLANID
+ maas $PROFILE interface link-subnet $NODE_SYS_ID $IF_NAME mode=$IF_MODE subnet=$SUBNET_CIDR || true
+ sleep 5
+ else
+ echo " >>> Not configuring, we have an empty Subnet CIDR"
+ fi
+ done
+ done
fi
-
# Add the cloud and controller credentials for MAAS for that lab.
jujuver=`juju --version`
Code Review / joid.git / commitdiff