docs: Refresh Makefile related instructions

While at it, add instructions for selecting the custom kernel
from Armband DEB repos.

JIRA: ARMBAND-243

Change-Id: Ie8828241dc3a83d7268dfbd3526303dc674aef10
Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>

diff --git a/docs/development/overview/build/build.instruction.rst b/docs/development/overview/build/build.instruction.rst
index f3d59ee..192c6ba 100644 (file)
--- a/docs/development/overview/build/build.instruction.rst
+++ b/docs/development/overview/build/build.instruction.rst
@@ -218,7 +218,7 @@ should first initialize the submodules and apply armband patches
 
 .. code-block:: bash
 
-    $ make patches-import
+    $ make fuel-patches-import
 
 
 Configure your build environment
@@ -227,15 +227,14 @@ Configure your build environment
 ** Configuring the build environment should not be performed if building
 standard Danube release **
 
-Select the versions of the components you want to build by editing the
-<armband/upstream/fuel/build/config.mk> and
-<armband/upstream/fuel/build/armband.mk> files.
+Select the versions of the components you want to build by editing
+<armband/armband-fuel-config.mk>.
 
 Note! The same observation as above, before altering Makefile, run:
 
 .. code-block:: bash
 
-    $ make patches-import
+    $ make fuel-patches-import
 
 
 Non official build: Selecting which plugins to build
@@ -246,7 +245,7 @@ individual developer locally), the selection if which Fuel plugins to
 build (if any) can be done by environment variable
 "BUILD_FUEL_PLUGINS" prior to building.
 
-Only the plugin targets from <armband/upstream/fuel/build/armband.mk> that
+Only the plugin targets from <armband/armband-fuel-config.mk> that
 are specified in the environment variable will then be built. In order to
 completely disable the building of plugins, the environment variable
 is set to " ". When using this functionality, the resulting iso file
@@ -279,7 +278,7 @@ Following targets exist:
 
 - release - this will do the same as:
 
-  - make submodules-clean patches-import build
+  - make submodules-clean fuel-patches-import build
 
 - none/all/build -  this will:
 

diff --git a/docs/release/installation/installation.instruction.rst b/docs/release/installation/installation.instruction.rst
index 1b85d71..e24fe27 100644 (file)
--- a/docs/release/installation/installation.instruction.rst
+++ b/docs/release/installation/installation.instruction.rst
@@ -547,6 +547,10 @@ Allocate nodes to environment and assign functional roles
 OPTIONAL - Set Local Mirror Repos
 =================================
 
+**NOTE**: Support for local mirrors is incomplete in Danube 1.0.
+You may opt in for it to fetch less packages from internet during deployment,
+but an internet connection is still required.
+
 The following steps must be executed if you are in an environment with
 no connection to the Internet. The Fuel server delivers a local repo
 that can be used for installation / deployment of openstack.
@@ -555,11 +559,11 @@ that can be used for installation / deployment of openstack.
 
    - Replace the URI values for the "Name" values outlined below:
 
-   - "ubuntu" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ trusty main"
+   - "ubuntu" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ xenial main"
 
-   - "mos" URI="deb http://<ip-of-fuel-server>::8080/mitaka-9.0/ubuntu/x86_64 mos9.0 main restricted"
+   - "mos" URI="deb http://<ip-of-fuel-server>::8080/newton-10.0/ubuntu/x86_64 mos10.0 main restricted"
 
-   - "Auxiliary" URI="deb http://<ip-of-fuel-server>:8080/mitaka-9.0/ubuntu/auxiliary auxiliary main restricted"
+   - "Auxiliary" URI="deb http://<ip-of-fuel-server>:8080/newton-10.0/ubuntu/auxiliary auxiliary main restricted"
 
    - Click <Save Settings> at the bottom to Save your changes
 
@@ -589,6 +593,28 @@ Target specific configuration
 
    .. figure:: img/fuelwsrepsst.png
 
+#. [AArch64 specific] Use kernel 4.8 for experimental GICv3 features
+
+   **NOTE**: This kernel is required for: SFC scenarios, GICv3 live migration.
+
+   **NOTE**: This kernel is included in the Armband ISO, all that is needed
+   for it to be used in a specific environemnt is to explicitly add it to
+   the list of packages that will be installed by baremetal provisioning.
+
+   In the FUEL UI of your Environment, click the <Settings> tab, click
+   <General> on the left side pane, then at the bottom of the page, in the
+   <Provision> subsection, amend the package list:
+
+   - remove <linux-headers-generic-lts-xenial>;
+
+   - remove <linux-image-generic-lts-xenial>;
+
+   - add <linux-image-4.8.0-9944-generic>;
+
+   - add <linux-headers-4.8.0-9944-generic>;
+
+   - add <linux-image-extra-4.8.0-9944-generic> (optional);
+
 #. Set up targets for provisioning with non-default "Offloading Modes"
 
    Some target nodes may require additional configuration after they are