X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=utils%2Fjenkins-jnlp-connect.sh;h=0647d321061aaff7f4e30f3ab6641e81a864dafc;hb=28f7d7c0ef101a6660b743620e0f2d5aa3e8993e;hp=9ef4298efeca34ef6f49bbe9bb0b44a7fe372fd3;hpb=d886d9bda19b153024a0cebf9be3146847df0451;p=releng.git

diff --git a/utils/jenkins-jnlp-connect.sh b/utils/jenkins-jnlp-connect.sh
index 9ef4298ef..0647d3210 100755
--- a/utils/jenkins-jnlp-connect.sh
+++ b/utils/jenkins-jnlp-connect.sh
@@ -11,10 +11,13 @@
 #Monit setup script for opnfv jnlp slave connections
 
 test_firewall() {
-    echo "testing that the firewall is open for us at build.opnfv.org"
-    test=$(echo "blah"| nc -w 4 build.opnfv.org 57387 > /dev/null 2>&1; echo $?)
+jenkins_hostname="${jenkins_hostname:-build.opnfv.org}"
+
+
+    echo "testing that the firewall is open for us at $jenkins_hostname"
+    test=$(echo "blah"| nc -w 4 $jenkins_hostname 57387 > /dev/null 2>&1; echo $?)
     if [[ $test == 0 ]]; then
-        echo "Firewall is open for us at build.opnfv.org"
+        echo "Firewall is open for us at $jenkins_hostname"
         exit 0
     else
         cat << EOF
@@ -30,8 +33,6 @@ EOF
 }
 
 main () {
-    dir=$(cd $(dirname $0); pwd)
-
     #tests
     if [[ -z $jenkinsuser || -z $jenkinshome ]]; then
         echo "jenkinsuser or home not defined, please edit this file to define it"
@@ -54,28 +55,17 @@ main () {
     fi
 
     if [[ $(whoami) != "root" ]]; then
-      if sudo -l | grep "requiretty"; then
+      if sudo -l | grep "requiretty"  | grep -v "\!requiretty"; then
         echo "please comment out Defaults requiretty from /etc/sudoers"
         exit 1
       fi
     fi
 
-
-    if [ -d /etc/monit/conf.d ]; then
-        monitconfdir="/etc/monit/conf.d/"
-    elif [ -d /etc/monit.d ]; then
-        monitconfdir="/etc/monit.d"
-    else
-        echo "Could not determine the location of the monit configuration file."
-        echo "Make sure monit is installed."
-        exit 1
-    fi
-
     #make pid dir
     pidfile="/var/run/$jenkinsuser/jenkins_jnlp_pid"
     if ! [ -d /var/run/$jenkinsuser/ ]; then
-        mkdir /var/run/$jenkinsuser/
-        chown $jenkinsuser:$jenkinsuser /var/run/$jenkinsuser/
+        sudo mkdir /var/run/$jenkinsuser/
+        sudo chown $jenkinsuser:$jenkinsuser /var/run/$jenkinsuser/
     fi
 
     if [[ $skip_monit != true ]]; then
@@ -94,58 +84,89 @@ main () {
                 exit 1
             fi
         fi
-    fi
 
-    makemonit () {
-        echo "Writing the following as monit config:"
+        if [ -d /etc/monit/conf.d ]; then
+            monitconfdir="/etc/monit/conf.d/"
+            monitconfig="/etc/monit/monitrc"
+            #add start delay
+            sed -i '/^#.* delay /s/^#//' "$monitconfig"
+        elif [ -d /etc/monit.d ]; then
+            monitconfdir="/etc/monit.d"
+            monitconfig="/etc/monitrc"
+            #add start delay
+            sed -i '/^#.* delay /s/^#//' "$monitconfig"
+        else
+            echo "Could not determine the location of the monit configuration file."
+            echo "Make sure monit is installed."
+            exit 1
+        fi
+
+        chown=$(type -p chown)
+        mkdir=$(type -p mkdir)
+
+        makemonit () {
+            echo "Writing the following as monit config:"
         cat << EOF | tee $monitconfdir/jenkins
+check directory jenkins_piddir path /var/run/$jenkinsuser
+if does not exist then exec "$mkdir -p /var/run/$jenkinsuser"
+if failed uid $jenkinsuser then exec "$chown $jenkinsuser /var/run/$jenkinsuser"
+if failed gid $jenkinsuser then exec "$chown :$jenkinsuser /var/run/$jenkinsuser"
+
 check process jenkins with pidfile /var/run/$jenkinsuser/jenkins_jnlp_pid
-start program = "/usr/bin/sudo -u $jenkinsuser /bin/bash -c 'cd $dir; export started_monit=true; $0 $@' with timeout 60 seconds"
+start program = "/usr/bin/sudo -u $jenkinsuser /bin/bash -c 'cd $jenkinshome; export started_monit=true; $0 $@' with timeout 60 seconds"
 stop program = "/bin/bash -c '/bin/kill \$(/bin/cat /var/run/$jenkinsuser/jenkins_jnlp_pid)'"
+depends on jenkins_piddir
 EOF
-    }
+        }
+
+        if [[ -f $monitconfdir/jenkins ]]; then
+            #test for diff
+            if [[ "$(diff $monitconfdir/jenkins <(echo "\
+check directory jenkins_piddir path /var/run/$jenkinsuser
+if does not exist then exec \"$mkdir -p /var/run/$jenkinsuser\"
+if failed uid $jenkinsuser then exec \"$chown $jenkinsuser /var/run/$jenkinsuser\"
+if failed gid $jenkinsuser then exec \"$chown :$jenkinsuser /var/run/$jenkinsuser\"
 
-    if [[ -f $monitconfdir/jenkins ]]; then
-        #test for diff
-        if [[ "$(diff $monitconfdir/jenkins <(echo "\
 check process jenkins with pidfile /var/run/$jenkinsuser/jenkins_jnlp_pid
-start program = \"/usr/bin/sudo -u $jenkinsuser /bin/bash -c 'cd $dir; export started_monit=true; $0 $@' with timeout 60 seconds\"
-stop program = \"/bin/bash -c '/bin/kill \$(/bin/cat /var/run/$jenkinsuser/jenkins_jnlp_pid)'\"\
+start program = \"/usr/bin/sudo -u $jenkinsuser /bin/bash -c 'cd $jenkinshome; export started_monit=true; $0 $@' with timeout 60 seconds\"
+stop program = \"/bin/bash -c '/bin/kill \$(/bin/cat /var/run/$jenkinsuser/jenkins_jnlp_pid)'\"
+depends on jenkins_piddir\
 ") )" ]]; then
-            echo "Updating monit config..."
+                echo "Updating monit config..."
+                makemonit $@
+            fi
+        else
             makemonit $@
         fi
-    else
-        makemonit $@
     fi
 
-if [[ $started_monit == "true" ]]; then
-    wget --timestamping https://build.opnfv.org/ci/jnlpJars/slave.jar && true
-    chown $jenkinsuser:$jenkinsuser slave.jar
+    if [[ $started_monit == "true" ]]; then
+        wget --timestamping https://"$jenkins_hostname"/jnlpJars/slave.jar && true
+        chown $jenkinsuser:$jenkinsuser slave.jar
 
-    if [[ -f /var/run/$jenkinsuser/jenkins_jnlp_pid ]]; then
-        echo "pid file found"
-        if ! kill -0 "$(/bin/cat /var/run/$jenkinsuser/jenkins_jnlp_pid)"; then
-            echo "no java process running cleaning up pid file"
-            rm -f /var/run/$jenkinsuser/jenkins_jnlp_pid;
-        else
-            echo "java connection process found and running already running quitting."
-            exit 1
+        if [[ -f /var/run/$jenkinsuser/jenkins_jnlp_pid ]]; then
+            echo "pid file found"
+            if ! kill -0 "$(/bin/cat /var/run/$jenkinsuser/jenkins_jnlp_pid)"; then
+                echo "no java process running cleaning up pid file"
+                rm -f /var/run/$jenkinsuser/jenkins_jnlp_pid;
+            else
+                echo "java connection process found and running already running quitting."
+                exit 1
+            fi
         fi
-    fi
 
-    if [[ $run_in_foreground == true ]]; then
-        $connectionstring
+        if [[ $run_in_foreground == true ]]; then
+            $connectionstring
+        else
+            exec $connectionstring &
+            echo $! > /var/run/$jenkinsuser/jenkins_jnlp_pid
+        fi
     else
-        exec $connectionstring &
-        echo $! > /var/run/$jenkinsuser/jenkins_jnlp_pid
+        echo "you are ready to start monit"
+        echo "eg: service monit start"
+        echo "example debug mode if you are having problems:  /usr/bin/monit -Ivv -c /etc/monit.conf "
+        exit 0
     fi
-else
-    echo "you are ready to start monit"
-    echo "eg: service monit start"
-    echo "example debug mode if you are having problems:  /usr/bin/monit -Ivv -c /etc/monit.conf "
-    exit 0
-fi
 }
 
 usage() {
@@ -164,10 +185,12 @@ usage: $0 [OPTIONS]
  -u  set jenkins user
  -n  set slave name
  -s  set secret key
+ -l  set host, default is build.opnfv.org/ci
  -t  test the connection string by connecting without monit
  -f  test firewall
 
-Example: $0 -j /home/jenkins/ -u jenkins -n lab1 -s 727fdefoofoofoofoofoofoofof800
+Example: $0 -j /home/jenkins -u jenkins -n lab1 -s 727fdefoofoofoofoofoofoofof800
+note: a trailing slash on -j /home/jenkins will break the script
 EOF
 
     exit 1
@@ -177,13 +200,14 @@ if [[ -z "$@" ]]; then
     usage
 fi
 
-while getopts "j:u:n:s:htf" OPTION
+while getopts "j:u:n:s:l:htf" OPTION
 do
     case $OPTION in
         j ) jenkinshome="$OPTARG" ;;
         u ) jenkinsuser="$OPTARG" ;;
         n ) slave_name="$OPTARG" ;;
         s ) slave_secret="$OPTARG";;
+        l ) jenkins_hostname="$OPTARG" ;;
         h ) usage ;;
         t ) started_monit=true
             skip_monit=true
@@ -193,6 +217,6 @@ do
     esac
 done
 
-connectionstring="java -jar slave.jar -jnlpUrl https://build.opnfv.org/ci/computer/"$slave_name"/slave-agent.jnlp -secret "$slave_secret" -noCertificateCheck "
-
+jenkins_hostname="${jenkins_hostname:-build.opnfv.org/ci}"
+connectionstring="java -jar slave.jar -jnlpUrl https://"$jenkins_hostname"/computer/"$slave_name"/slave-agent.jnlp -secret "$slave_secret" -noCertificateCheck "
 main "$@"