X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=src%2Fceph%2Fqa%2Ftasks%2Fthrashosds.py;fp=src%2Fceph%2Fqa%2Ftasks%2Fthrashosds.py;h=420b7355908d52832d46330637a00d603a8a4780;hb=812ff6ca9fcd3e629e49d4328905f33eee8ca3f5;hp=0000000000000000000000000000000000000000;hpb=15280273faafb77777eab341909a3f495cf248d9;p=stor4nfv.git diff --git a/src/ceph/qa/tasks/thrashosds.py b/src/ceph/qa/tasks/thrashosds.py new file mode 100644 index 0000000..420b735 --- /dev/null +++ b/src/ceph/qa/tasks/thrashosds.py @@ -0,0 +1,204 @@ +""" +Thrash -- Simulate random osd failures. +""" +import contextlib +import logging +import ceph_manager +from teuthology import misc as teuthology + + +log = logging.getLogger(__name__) + +@contextlib.contextmanager +def task(ctx, config): + """ + "Thrash" the OSDs by randomly marking them out/down (and then back + in) until the task is ended. This loops, and every op_delay + seconds it randomly chooses to add or remove an OSD (even odds) + unless there are fewer than min_out OSDs out of the cluster, or + more than min_in OSDs in the cluster. + + All commands are run on mon0 and it stops when __exit__ is called. + + The config is optional, and is a dict containing some or all of: + + cluster: (default 'ceph') the name of the cluster to thrash + + min_in: (default 4) the minimum number of OSDs to keep in the + cluster + + min_out: (default 0) the minimum number of OSDs to keep out of the + cluster + + op_delay: (5) the length of time to sleep between changing an + OSD's status + + min_dead: (0) minimum number of osds to leave down/dead. + + max_dead: (0) maximum number of osds to leave down/dead before waiting + for clean. This should probably be num_replicas - 1. + + clean_interval: (60) the approximate length of time to loop before + waiting until the cluster goes clean. (In reality this is used + to probabilistically choose when to wait, and the method used + makes it closer to -- but not identical to -- the half-life.) + + scrub_interval: (-1) the approximate length of time to loop before + waiting until a scrub is performed while cleaning. (In reality + this is used to probabilistically choose when to wait, and it + only applies to the cases where cleaning is being performed). + -1 is used to indicate that no scrubbing will be done. + + chance_down: (0.4) the probability that the thrasher will mark an + OSD down rather than marking it out. (The thrasher will not + consider that OSD out of the cluster, since presently an OSD + wrongly marked down will mark itself back up again.) This value + can be either an integer (eg, 75) or a float probability (eg + 0.75). + + chance_test_min_size: (0) chance to run test_pool_min_size, + which: + - kills all but one osd + - waits + - kills that osd + - revives all other osds + - verifies that the osds fully recover + + timeout: (360) the number of seconds to wait for the cluster + to become clean after each cluster change. If this doesn't + happen within the timeout, an exception will be raised. + + revive_timeout: (150) number of seconds to wait for an osd asok to + appear after attempting to revive the osd + + thrash_primary_affinity: (true) randomly adjust primary-affinity + + chance_pgnum_grow: (0) chance to increase a pool's size + chance_pgpnum_fix: (0) chance to adjust pgpnum to pg for a pool + pool_grow_by: (10) amount to increase pgnum by + max_pgs_per_pool_osd: (1200) don't expand pools past this size per osd + + pause_short: (3) duration of short pause + pause_long: (80) duration of long pause + pause_check_after: (50) assert osd down after this long + chance_inject_pause_short: (1) chance of injecting short stall + chance_inject_pause_long: (0) chance of injecting long stall + + clean_wait: (0) duration to wait before resuming thrashing once clean + + sighup_delay: (0.1) duration to delay between sending signal.SIGHUP to a + random live osd + + powercycle: (false) whether to power cycle the node instead + of just the osd process. Note that this assumes that a single + osd is the only important process on the node. + + bdev_inject_crash: (0) seconds to delay while inducing a synthetic crash. + the delay lets the BlockDevice "accept" more aio operations but blocks + any flush, and then eventually crashes (losing some or all ios). If 0, + no bdev failure injection is enabled. + + bdev_inject_crash_probability: (.5) probability of doing a bdev failure + injection crash vs a normal OSD kill. + + chance_test_backfill_full: (0) chance to simulate full disks stopping + backfill + + chance_test_map_discontinuity: (0) chance to test map discontinuity + map_discontinuity_sleep_time: (40) time to wait for map trims + + ceph_objectstore_tool: (true) whether to export/import a pg while an osd is down + chance_move_pg: (1.0) chance of moving a pg if more than 1 osd is down (default 100%) + + optrack_toggle_delay: (2.0) duration to delay between toggling op tracker + enablement to all osds + + dump_ops_enable: (true) continuously dump ops on all live osds + + noscrub_toggle_delay: (2.0) duration to delay between toggling noscrub + + disable_objectstore_tool_tests: (false) disable ceph_objectstore_tool based + tests + + chance_thrash_cluster_full: .05 + + chance_thrash_pg_upmap: 1.0 + chance_thrash_pg_upmap_items: 1.0 + + example: + + tasks: + - ceph: + - thrashosds: + cluster: ceph + chance_down: 10 + op_delay: 3 + min_in: 1 + timeout: 600 + - interactive: + """ + if config is None: + config = {} + assert isinstance(config, dict), \ + 'thrashosds task only accepts a dict for configuration' + # add default value for sighup_delay + config['sighup_delay'] = config.get('sighup_delay', 0.1) + # add default value for optrack_toggle_delay + config['optrack_toggle_delay'] = config.get('optrack_toggle_delay', 2.0) + # add default value for dump_ops_enable + config['dump_ops_enable'] = config.get('dump_ops_enable', "true") + # add default value for noscrub_toggle_delay + config['noscrub_toggle_delay'] = config.get('noscrub_toggle_delay', 2.0) + # add default value for random_eio + config['random_eio'] = config.get('random_eio', 0.0) + + log.info("config is {config}".format(config=str(config))) + + overrides = ctx.config.get('overrides', {}) + log.info("overrides is {overrides}".format(overrides=str(overrides))) + teuthology.deep_merge(config, overrides.get('thrashosds', {})) + cluster = config.get('cluster', 'ceph') + + log.info("config is {config}".format(config=str(config))) + + if 'powercycle' in config: + + # sync everyone first to avoid collateral damage to / etc. + log.info('Doing preliminary sync to avoid collateral damage...') + ctx.cluster.run(args=['sync']) + + if 'ipmi_user' in ctx.teuthology_config: + for remote in ctx.cluster.remotes.keys(): + log.debug('checking console status of %s' % remote.shortname) + if not remote.console.check_status(): + log.warn('Failed to get console status for %s', + remote.shortname) + + # check that all osd remotes have a valid console + osds = ctx.cluster.only(teuthology.is_type('osd', cluster)) + for remote in osds.remotes.keys(): + if not remote.console.has_ipmi_credentials: + raise Exception( + 'IPMI console required for powercycling, ' + 'but not available on osd role: {r}'.format( + r=remote.name)) + + cluster_manager = ctx.managers[cluster] + for f in ['powercycle', 'bdev_inject_crash']: + if config.get(f): + cluster_manager.config[f] = config.get(f) + + log.info('Beginning thrashosds...') + thrash_proc = ceph_manager.Thrasher( + cluster_manager, + config, + logger=log.getChild('thrasher') + ) + try: + yield + finally: + log.info('joining thrashosds') + thrash_proc.do_join() + cluster_manager.wait_for_all_osds_up() + cluster_manager.flush_all_pg_stats() + cluster_manager.wait_for_recovery(config.get('timeout', 360))