X-Git-Url: https://gerrit.opnfv.org/gerrit/gitweb?a=blobdiff_plain;f=src%2Fceph%2Fdoc%2Frbd%2Fiscsi-initiator-win.rst;fp=src%2Fceph%2Fdoc%2Frbd%2Fiscsi-initiator-win.rst;h=0000000000000000000000000000000000000000;hb=7da45d65be36d36b880cc55c5036e96c24b53f00;hp=08a1cfbde6f02fff8799aebfe7557bbdd8b905ea;hpb=691462d09d0987b47e112d6ee8740375df3c51b2;p=stor4nfv.git

diff --git a/src/ceph/doc/rbd/iscsi-initiator-win.rst b/src/ceph/doc/rbd/iscsi-initiator-win.rst
deleted file mode 100644
index 08a1cfb..0000000
--- a/src/ceph/doc/rbd/iscsi-initiator-win.rst
+++ /dev/null
@@ -1,100 +0,0 @@
------------------------------------------
-The iSCSI Initiator for Microsoft Windows
------------------------------------------
-
-**Prerequisite:**
-
--  Microsoft Windows 2016
-
-**iSCSI Initiator, Discovery and Setup:**
-
-#. Install the iSCSI initiator driver and MPIO tools.
-
-#. Launch the MPIO program, click on the “Discover Multi-Paths” tab select “Add
-   support for iSCSI devices”.
-
-#. On the iSCSI Initiator Properties window, on the "Discovery" tab, add a target
-   portal. Enter the IP address or DNS name and Port of the Ceph iSCSI gateway.
-
-#. On the “Targets” tab, select the target and click on “Connect”.
-
-#. On the “Connect To Target” window, select the “Enable multi-path” option, and
-   click the “Advanced” button.
-
-#. Under the "Connet using" section, select a “Target portal IP” . Select the
-   “Enable CHAP login on” and enter the "Name" and "Target secret" values from the
-   Ceph iSCSI Ansible client credentials section, and click OK.
-
-#. Repeat steps 5 and 6 for each target portal defined when setting up
-   the iSCSI gateway.
-
-**Multipath IO Setup:**
-
-Configuring the MPIO load balancing policy, setting the timeout and
-retry options are using PowerShell with the ``mpclaim`` command. The
-reset is done in the MPIO tool.
-
-.. note::
-  It is recommended to increase the ``PDORemovePeriod`` option to 120
-  seconds from PowerShell. This value might need to be adjusted based
-  on the application. When all paths are down, and 120 seconds
-  expires, the operating system will start failing IO requests.
-
-::
-
-    Set-MPIOSetting -NewPDORemovePeriod 120
-
-::
-
-    mpclaim.exe -l -m 1
-
-::
-
-    mpclaim -s -m
-    MSDSM-wide Load Balance Policy: Fail Over Only
-
-#. Using the MPIO tool, from the “Targets” tab, click on the
-   “Devices...” button.
-
-#. From the Devices window, select a disk and click the
-   “MPIO...” button.
-
-#. On the "Device Details" window the paths to each target portal is
-   displayed. If using the ``ceph-ansible`` setup method, the
-   iSCSI gateway will use ALUA to tell the iSCSI initiator which path
-   and iSCSI gateway should be used as the primary path. The Load
-   Balancing Policy “Fail Over Only” must be selected
-
-::
-
-    mpclaim -s -d $MPIO_DISK_ID
-
-.. note::
-  For the ``ceph-ansible`` setup method, there will be one
-  Active/Optimized path which is the path to the iSCSI gateway node
-  that owns the LUN, and there will be an Active/Unoptimized path for
-  each other iSCSI gateway node.
-
-**Tuning:**
-
-Consider using the following registry settings:
-
--  Windows Disk Timeout
-
-   ::
-
-       HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\Disk
-
-   ::
-
-       TimeOutValue = 65
-
--  Microsoft iSCSI Initiator Driver
-
-   ::
-
-       HKEY_LOCAL_MACHINE\\SYSTEM\CurrentControlSet\Control\Class\{4D36E97B-E325-11CE-BFC1-08002BE10318}\<Instance_Number>\Parameters
-
-   ::
-       LinkDownTime = 25
-       SRBTimeoutDelta = 15